Search NASA⌕ Search

SEARCH · Search NASA

Results for “shuttle effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Polypyrrole-encapsulated amorphous Bi 2 S 3 hollow sphere for long life sodium ion batteries and lithium–sulfur batteries

Sodium ion batteries (SIBs) and lithium–sulfur (Li–S) batteries are considered as the most enticing next-generation energy storage devices to displace the widely used lithium ion batteries due to their inherent advantages. In this work, polypyrrole-encapsulated amorphous Bi 2 S 3 hollow spheres are prepared by the sulfuration of Bi–glycol spheres with a polypyrrole (PPy) coating. Benefiting from the unique hollow structure (Kirkendall effect) and the excellent conductivity and flexibility of the PPy coating, this material can be applied in both SIBs and Li–S batteries. For SIBs, the unconductive amorphous Bi 2 S 3 is electrochemically reduced to conductive metallic Bi, leading to a Bi–PPy core–shell structure. The resulting Bi acts as the main active material while the PPy coating accommodates the volume variation of Bi during sodiation/desodiation. For Li–S batteries, the outer double layer structure effectively prevents the dissolution and “shuttle effect” of polysulfides by physically containing and chemically adsorbing polysulfides, and tolerates the volume expansion of sulfur. Meanwhile, the residual polyvinyl pyrrolidone in the preparation process is chemically bonded with sulfur and exhibits the electrochemical properties, and results in additional discharging/charging capacity. Hence, this multifunctional electrode shows excellent rate capability and cycling life in SIBs and Li–S batteries. This research allows new insight into the design of multifunctional electrodes.

25 ENERGY STORAGE↗

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Lithium–sulfur (Li-S) batteries with high energy density and low cost are promising for next-generation energy storage. However, their cycling stability is plagued by the high solubility of lithium polysulfide (LiPS) intermediates, causing fast capacity decay and severe self-discharge. Exploring electrolytes with low LiPS solubility has shown promising results toward addressing these challenges. However, here, we report that electrolytes with moderate LiPS solubility are more effective for simultaneously limiting the shuttling effect and achieving good Li-S reaction kinetics. We explored a range of solubility from 37 to 1,100 mM (based on S atom, [S]) and found that a moderate solubility from 50 to 200 mM [S] performed the best. Using a series of electrolyte solvents with various degrees of fluorination, we formulated the S ingle- S olvent, S ingle- S alt, S tandard S alt concentration with M oderate L i PSs so l ubility E lectrolytes (termed S 6 MILE ) for Li-S batteries. Among the designed electrolytes, Li-S cells using fluorinated-1,2-diethoxyethane S 6 MILE (F4DEE-S 6 MILE) showed the highest capacity of 1,160 mAh g −1 at 0.05 C at room temperature. At 60 °C, fluorinated-1,4-dimethoxybutane S 6 MILE (F4DMB-S 6 MILE) gave the highest capacity of 1,526 mAh g −1 at 0.05 C and an average CE of 99.89% for 150 cycles at 0.2 C under lean electrolyte conditions. This is a fivefold increase in cycle life compared with other conventional ether-based electrolytes. Moreover, we observed a long calendar aging life, with a capacity increase/recovery of 4.3% after resting for 30 d using F4DMB-S 6 MILE. Furthermore, the correlation between LiPS solubility, degree of fluorination of the electrolyte solvent, and battery performance was systematically investigated.

25 ENERGY STORAGE↗

Highly Loaded Sulfur Cathode, Coated Separator and Gel Electrolyte for High Rate Li-Sulfur Batteries

As one of DOE Battery 500 Seedling projects, Cornell University and EIC Labs investigated and developed i) highly loaded sulfur cathodes (> 3 mg/cm 2 ), ii) hybrid separators, and iii) gel ceramic electrolytes (GCE) to mitigate the low rate capability, shuttling effect and limited cycle life in high performance Li-Sulfur batteries. Scalable nanomanufacturing processes such as air-controlled electrospray (ACES) and gas-assisted electrospinning (GAES) have been utilized to develop directly deposited electrodes and polymer/ceramic hybrid separators. First, in the development of highly loaded cathodes, alternating layers of sulfur impregnated mesoporous carbon and graphene were fabricated via ACES and the resulting layered cathodes and coated separators exhibit higher capacity and capacity retention (about 1,000 mAh/g capacity with less than 0.02% fade/cycles) than single layer cathode or cathode prepared by conventional slurry cast. Alternating layer approach via ACES has been applied to high loading systems (3 - 5 mg S/cm 2 ), demonstrating the potential to increase sulfur utilization and capacity retention. We have also incorporated iron oxides (Fe 3 O 4 ) into S/mesoporous carbon/graphene cathodes to enhance sulfur utilization and mitigation of polysulfide shuttling. and the effect of Fe 3 O 4 in mesoporous carbon and Gr is highly pronounced at high C rates of 1C and 2C cycling performance. To further improve the cathodes at high rates, graphene nanoribbons (GNR) which can promote ion transport were incorporated in the cathode, resulting in 550 mAh/g at 5C/5C rates. Hybrid Li-ion/Li-S cathodes has also been explored to better engage unreacted polysulfides during charge/discharge. S/LFP hybrid cathodes offer higher sulfur utilization and enhanced rate capability, as well as higher areal loading. This study suggests inclusion of iron phosphide (Fe2P) which can chemically interact with polysulfides can further enhance sulfur utilization and mitigation of soluble polysulfides at high rates. Secondly, in the development of hybrid separators, we first employed graphene coating on the commercial polyolefin separators, which exhibits higher capability, better capacity retention and enhanced rate capability. To improve the rate capability with enhanced safety features such as thermal stability and nonflammability, we developed polymer/ceramic hybrids based on thermally stable polyimide (PI) and room temperature curable ceramic precursors such as organopolysilazane (OPSZ) or polysilsesquioxanes (PSSQ), which exhibit no shrinkages up to 300 ºC and non-flammability. To improve mechanical properties and electrochemical stability, polybenzimidazole (PBI) and alumina have been incorporated in polymer/ceramic hybrid separator, replacing PI and OPSZ/PSSQ, respectively. Finally, the gel ceramic electrolyte (GCE) based on ceramic cross linkers have been applied to make Li-S cells even safer and also to mitigate the polysulfide shuttling further. The resulting gel ceramic electrolyte offers improved capacity retention and rate capability, and also effectively mitigates polysulfide shuttling which was also confirmed by modeling. Inclusion of high ion conducting additives into GCE together with polymer/ceramic hybrid separators exhibit the higher ionic conductivity than liquid electrolyte with commercial polyolefin separator. We demonstrated that the developed highly loaded sulfur cathodes, polymer/ceramic hybrid separators and gel ceramic electrolyte can effectively mitigate the low rate capability, shuttling effect and limited cycle life in high performance Li-Sulfur batteries with improved safety.

25 ENERGY STORAGE↗

Applications of Tethers in Space: Workshop Proceedings, Volume 2

Topics addressed include: tethered orbital transfer vehicle operations, Centaur and Shuttle tether technology; tethered constellations, gravitational effects; Shuttle continuous open wind tunnel; optimal control laws, electrodynamic tether technology; and space station facilities.

Baracat, W. A.↗

Systematic and rapid screening for the redox shuttle inhibitors in lithium-sulfur batteries

High performance liquid chromatography (HPLC) can be used to systematically and rapidly screen the potential additives for the inhibition of the polysulfide shuttle effect in a Li-S battery. The method is proven effective by investigating the 18 compounds which were reported in the literature as redox shuttle inhibitors for Li-S batteries. The change of the polysulfide ions from being exposed to 18 different redox shuttle inhibition additives was qualitatively and quantitatively determined. The changes of polysulfide species and elemental sulfur were successfully used to study the inhibition effect of the additives in Li-S batteries. It was confirmed that nitrate salts under the same concentration showed the best inhibition effect for the polysulfide shuttle reaction. However even in the electrolyte with nitrate additives, the shuttle reactions between Li metal and polysulfides (and elemental sulfur) are still notable, and thus the search for a better polysulfide shuttle inhibitor is ongoing and critical for improving the electrochemical performance of Li-S batteries.

25 ENERGY STORAGE↗

Recent advances in polysulfide mediation of lithium-sulfur batteries via facile cathode and electrolyte modification

Lithium-sulfur (Li-S) batteries have garnered immense interest due to their potential to surpass the energy densities of state-of-the-art lithium-ion batteries. However, severe technical problems of polysulfide dissolution and shuttle effect still prohibit the commercialization of Li-S batteries. This review focuses on the recent advances of polysulfide mediation in conventional Li-S batteries with liquid electrolytes. Simple yet effective solutions to control polysulfide dissolution and shuttling via facile modification of the cathode and the electrolyte are highlighted. The rational design of cathode composition, the use of polysulfide barrier layers, and the selection of electrolyte components are discussed. These strategies offer significant promise to address the challenges and increase the viability of the large-scale application of Li-S batteries.

25 ENERGY STORAGE↗

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

A polyisoprene-sulfur (PIPS) copolymer and nano sulfur composite material (90 wt % sulfur) is synthesized through inverse vulcanization of PIP polymer with micrometer-sized sulfur particles for high-areal-capacity lithium sulfur batteries. The polycrystalline structure and nanodomain nature of the copolymer are revealed through high-resolution transmission electron microscopy (HRTEM). PIP polymer is also used as binders for the electrode to further capture the dissovlved polysulfides. A high areal capacity of ca. 7.0 mAh/cm 2 and stable cycling are achieved based on the PIPS nanosulfur composite with a PIP binder, crucial to commercialization of lithium sulfur batteries. The chemical confinement both at material and electrode level alleviates the diffusion of polysulfides and the shuttle effect. The sulfur electrodes, both fresh and cycled, are analyzed through scanning electron microscopy (SEM). Finally, this approach enables scalable material production and high sulfur utilization at the cell level.

25 ENERGY STORAGE↗

Holistic Design Consideration of Metal–Organic Framework-Based Composite Membranes for Lithium–Sulfur Batteries

Metal–organic framework (MOF)-based membranes have received significant attention as separators for lithium–sulfur (Li–S) batteries because of their high porosities, well-defined and tailored structures, and other tunable features that are desirable for preventing the “shuttle effect” of soluble polysulfides. Because of the insulating nature of most MOFs, composite membranes are generally constructed by a combination of MOFs and electron-conductive materials. In this work, we examine the property–performance relation between MOF-based separators and Li–S batteries by systematically adjusting the electrical conductivity, thickness, and mass loading of the MOF-based composite. Beyond the commonly referenced trapping or blocking ability of MOFs toward polysulfides, we find that by fixing the thickness of the MOF-based composite coating layer (~40 μm) on a Celgard membrane, the electrical conductivity of the MOF composite layer is of paramount importance compared with the physical/ chemical trapping ability of polysulfides. However, the trapping ability of MOFs becomes indispensable when the thickness of the composite layer is small (e.g., ~20 μm), indicating the synergetic effects of the adsorption and conversion capabilities of the thin composite layer. Furthermore, this work suggests the importance of a holistic design consideration for a MOF-based membrane for long-life and high-energy-density Li–S batteries.

25 ENERGY STORAGE↗

Polysulfides capture-copper additive for long cycle life lithium sulfur batteries

Copper powder was introduced into the lithium sulfur battery system to capture intermediate polysulfides and Cu x S (x = 1 or 2) species was generated depending on the chain length of polysulfides. This phenomenon was verified by X-ray absorption near edge structure technique. The results indicated that copper can be oxidized to CuS by Li 2 S x (x ≥ 6), and a mixture of Cu 2 S and CuS was obtained when x ranges from 3 to 6. While Cu 2 S is eventually formed in the presence of Li 2 S 3 . After several cycles activation, the polysulfide-shuttle effect and self-discharge phenomenon which hinder the application of lithium sulfur batteries are found nearly eliminated Further experiments demonstrated that in the case of Cu 2 S generation, a high specific sulfur capacity of 1300 mAh g –1 could be delivered, corresponding to 77.6% sulfur utilization, while the Coulombic efficiency approximates around 100%. As a result, self-discharge experiment further demonstrated that polysulfides almost disappear in the electrolyte, which verified the polysulfide-capture capability of copper.

25 ENERGY STORAGE↗

Evaluating silicene as a potential cathode host to immobilize polysulfides in lithium–sulfur batteries

The internal shuttle effect caused by polysulfides dissolution and migration negatively impacts lithium–sulfur battery performance. In this paper, a mesoscale simulation strategy, which involves atomistic calculation and coarse-grained molecular modeling, is employed to evaluate silicene as a potential cathode host material to immobilize polysulfides. Adsorption energies of insoluble polysulfides (Li 2 S x with x =1, 2) and soluble polysulfide Li 2 S 4 on pristine and doped silicene sheets are calculated. Results show that the adsorption is thermodynamically favorable and N-doped silicene is helpful in trapping intermediate discharge products, Li 2 S 2 and Li 2 S 4 . The dissociation and reduction of long-chain polysulfides to short-chain polysulfides are observed. Electronic structure analysis shows that Li 2 S x molecules interact with silicene via strong chemical bonds. The atomistic structure evolution of Li 2 S layer formation on silicene is also investigated in this study. It is found that Li 2 S (110) layer forms first, and then, it is converted to Li 2 S (111) layer by introducing more Li 2 S molecules to the substrate. Li 2 S (111)/silicene interfacial structure is thermodynamically stable, and the interaction is dominated by Li–Si bonds. A coarse-grained model is developed to study and compare the growth of Li 2 S on silicene and graphene. Lastly, Li 2 S-induced surface coverage is faster on silicene than on graphene, which indicates that a silicene-based cathode host will experience more acute surface passivation, which will adversely affect cathode performance.

25 ENERGY STORAGE↗

Catalytic disproportionation on carbon superstructures enables long-life, high-loading Li–S batteries

Electrocatalysis has been widely explored as an effective strategy to accelerate polysulfide (PS) conversion and suppress the shuttle effect in lithium–sulfur (Li–S) batteries. However, the underlying mechanisms remain elusive, and electrocatalytic reactions are inactive during cell resting. In this work, we reveal and quantitatively analyze a previously unrecognized sulfur reduction route (SRR) driven by catalytic disproportionation at the carbon cathode surface—fundamentally distinct from conventional electrocatalysis. Unlike conventional stepwise pathways, this SRR enables high-order polysulfides (Sₓ²⁻, x = 5–8) to directly convert into S₈ and Li₂S₂, bypassing low-order intermediates. This sulfur-reduction shortcut is systematically elucidated through high-performance liquid chromatography, revealing the intrinsic catalytic contribution of carbon frameworks and the dynamic evolution of PS species. We demonstrate that carbon superstructures (CSS-0.5), assembled from nanosheet subunits with abundant N/O functionalities and interconnected charge-migration channels, synergistically promote this catalytic process. Benefiting from these features, CSS-0.5 delivers superior electrochemical performance under practical conditions, enabling high sulfur loading (6.0 mg cm⁻²) pouch cells with 80.5% capacity retention over 210 cycles. This study provides the first quantitative evidence of electrocatalytic disproportionation in Li–S batteries, offering mechanistic insights and design principles for advanced sulfur cathodes.

25 ENERGY STORAGE↗

A high-energy and long-cycling lithium–sulfur pouch cell via a macroporous catalytic cathode with double-end binding sites

Lithium-sulfur batteries are attractive alternatives to lithium-ion batteries because of their high theoretical specific energy and natural abundance of sulfur. However, the practical specific energy and cycle life of Li-S pouch cells are significantly limited by the use of thin sulfur electrodes/flooded electrolytes and polysulfides shuttle/Li metal degradation, respectively. In this work we propose a cathode design concept to achieve good Li-S pouch cell performances. The cathode is composed of uniformly embedded ZnS nanoparticles and Co-N-C single-atom catalyst to form double-end biding sites inside a highly oriented macroporous host, which can effectively immobilize and catalytically convert polysulfides intermediates during cycling, thus eliminating the shuttle effect and lithium metal corrosion. The ordered macropores enhance ionic transport under high sulfur loading by forming sufficient catalyst/conductive support/electrolyte triple-phase boundaries. This prevents the formation of inactive sulfur (dead sulfur). Our cathode structure shows improved performances in a pouch cell configuration under high sulfur loading and lean electrolyte operation. An Ah-level pouch cell with only 100% lithium excess can deliver a cell specific energy of > 300 Wh kg –1 with a Coulombic efficiency >95% for 80 cycles.

25 ENERGY STORAGE↗

Poly(vinylferrocene) as an Ionomer and Sulfur-Confining Additive for Lithium–Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising owing to their high energy density, environmental benignity, and low cost. Most of the commonly used binders in Li-S battery cathodes are inert and have no significant effect on the challenges of sulfur as a cathode material, such as the polysulfide shuttle effect, low ionic/electronic conductivity, and a sluggish redox reaction. In this work, we demonstrate the use of poly(vinylferrocene) (PvFc) as a binder additive that can effectively increase the ionic conductivity of the cathode and act as a sulfide confining agent. Electrochemical tests performed with PvFc as part of the binder mixture used to cast the cathodes demonstrate an increase in rate capability and cycle life when compared to the baseline samples. Ionic conductivity measurements and X-ray photoelectron spectroscopy suggest that the π-cation molecular interaction between the cyclopentadienyl rings from ferrocene and Li + act like an ion couple with ferrocene acting as a static, covalently bound acceptor of Li + ions that enhances their mobility through the cathode. This coupled with the affinity between the ferrocenyl cations and the Li salt anions, which provides more distribution of counterions for Li + movement and improves accessibility to the cathode S reservoir, make PvFc a promising ionomer for Li-S batteries. In addition, the π-cation bonds between cyclopentadienyl and lithium polysulfides produce a sulfide confining effect that mitigates capacity fade through polysulfide dissolution. Furthermore, this work demonstrates an expansion in the utility of PvFc as a component in Li-ion batteries, which so far is mostly limited to use as an active material in organometallic batteries.

25 ENERGY STORAGE↗

Application of computer image enhancement techniques to shuttle hand-held photography

With the advent of frequent Space Transportation System Shuttle missions, photography from hyperaltitudes stands to become an accessible and convenient resource for scientists and environmental managers. As satellite products (such as LANDSAT) continue to spiral in costs, all but the most affluent consumer is finding Earth imagery from space to be more and more unavailable. Therefore, the potential for Shuttle photography to serve a wide variety of users is increasing. However, despite the popularity of photos from space as public relations tools and report illustrations, little work has been performed to prove their scientific worth beyond that as basic mapping bases. It is the hypothesis of this project that hand-held Earth photography from the Space Shuttle has potentially high scientific merit and that primary data can be extracted. In effect, Shuttle photography should be considered a major remote sensing information resource.

David, B. E.↗

Lithium nitrate: A double-edged sword in the rechargeable lithium-sulfur cell

Lithium nitrate (LiNO 3 ) has been the most studied electrolyte additive in lithium-sulfur (Li-S) cells, due to its known function of suppressing the shuttle effect in Li-S cells, which provides a significant increase in the cell's coulombic efficiency and cycling stability. Previous studies indicated that LiNO 3 participated in the formation of a passive layer on the lithium electrode and thus suppressed the redox shuttle of the dissolved polysulfides. However, the effects of the LiNO 3 on the positive electrode materials have rarely been investigated. By combining scanning electron microscopy, element-selective X-ray absorption spectroscopy, and electrochemical characterizations, we performed a comprehensive study of how the LiNO 3 altered the properties of the sulfur electrode/electrolyte interface in Li-S cells and thus influenced the cell performance. We found that LiNO 3 is a double-edged sword in the Li-S cell: on one hand, it increased the consumption of the active sulfur; on the other hand, it promoted the survival of the carbon matrix constituent in the sulfur electrode. These two competitive effects indicated that a proper moderate concentration of LiNO 3 is required to achieve an optimized cell performance.

25 ENERGY STORAGE↗

Hollow spherical Lanthanum oxide coated separator for high electrochemical performance lithium-sulfur batteries

Highlights: • Hollow spherical La{sub 2}O{sub 3} was fabricated by a spray dryer. • Hollow spherical La{sub 2}O{sub 3} was coated on the routine separator and equipped in Li-S battery. • La{sub 2}O{sub 3} coated layer can effectively trap lithium polysulfides and accelerate the electrochemical kinetics of the redox reactions. - Abstract: In order to alleviate the shuttle effects of lithium polysulfides (LiPSs) in Lithium sulfur batteries. Lanthanum oxide (La{sub 2}O{sub 3}) with a hollow spherical structure was synthesized by a spray dryer and coated on the routine separator evenly as the main coating material to trap LiPSs and accelerate the electrochemical kinetics of the redox reactions.CV tests and EIS analysis demonstrate that Li-S battery equipped with this modified separator shows higher discharge potential and faster electrochemical reaction in comparison with the routine separator and super P coated separator samples. Charge/discharge measurements at different current densities show that Li-S cell with the hollow spherical La{sub 2}O{sub 3} coated separator can deliver an initial capacity of 966 mA hg{sup −1} at 1C and maintains a discharge capacity of 720 mA hg{sup −1} after 200 cycles. Besides, it presents a high discharge capacity of 820 mA hg{sup −1} at 2C which demonstrates a promising rate performance.

36 MATERIALS SCIENCE↗

Assessment of possible environmental effects of space shuttle operations

The potential of shuttle operations to contribute to atmospheric pollution is investigated. Presented in this interim report are results of the study to date on rocket exhaust inventory, exhaust interactions, dispersion of the ground cloud, detection and measurement of hydrochloric acid and aluminum oxide, environmental effects of hydrochloric acid and aluminum oxide, stratospheric effects of shuttle effluents, and mesospheric and ionospheric effects of orbiter reentry. The results indicate space shuttle operation will not result in adverse environmental effects if appropriate launch constraints are met.

Cicerone, R. J.↗