SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cobalt-iron alloys containing from 7.0 to 9.3 percent iron prepared from ultrapure cobalt and iron have the highest Curie point of all known magnetically soft materials. Their high permeability, low hysteresis loss, good saturation induction, and square loop characteristics recommend them for use in power transformers and rotating machinery.
A transient finite difference wave envelope formulation is presented for sound propagation, without steady flow. Before the finite difference equations are formulated, the governing wave equation is first transformed to a form whose solution tends not to oscillate along the propagation direction. This transformation reduces the required number of grid points by an order of magnitude. Physically, the transformed pressure represents the amplitude of the conventional sound wave. The derivation for the wave envelope transient wave equation and appropriate boundary conditions are presented as well as the difference equations and stability requirements. To illustrate the method, example solutions are presented for sound propagation in a straight hard wall duct and in a two dimensional straight soft wall duct. The numerical results are in good agreement with exact analytical results.
A transient finite difference wave envelope formulation is presented for sound propagation, without steady flow. Before the finite difference equations are formulated, the governing wave equation is first transformed to a form whose solution tends not to oscillate along the propagation direction. This transformation reduces the required number of grid points by an order of magnitude. Physically, the transformed pressure represents the amplitude of the conventional sound wave. The derivation for the wave envelope transient wave equation and appropriate boundary conditions are presented as well as the difference equations and stability requirements. To illustrate the method, example solutions are presented for sound propagation in a straight hard wall duct and in a two dimensional straight soft wall duct. The numerical results are in good agreement with exact analytical results.
A screen cage ion plating (SCIP) technique was developed to apply silver films on electrically nonconducting aluminum oxide. It is shown that SCIP has remarkable throwing power; surfaces to be coated need not be in direct line of sight with the evaporation source. Scratch tests, employing a diamond stylus with a 200 micro m radius tip, were performed on uncoated and on silver coated alumina. Subsequent surface analysis show that a significant amount of silver remains on the scratched surfaces, even in areas where high stylus load produced severe crack patterns in the ceramic. Friction coefficients were lowered during the scratch tests on the coated alumina indicating that this modification of the ion planting process should be useful for applying lubricating films of soft metals to electrical insulating materials. The very good throwing power of SCIP also strongly suggests general applicability of this process in other areas of technology, e.g., electronics, in addition to tribology.
We report on a study of all major solar eruptions that occurred on the frontside of the Sun during the rise to peak phase of cycle 24 (first 62 months) in order to understand the key factors affecting the occurrence of large solar energetic particle events (SEPs) and ground level enhancement (GLE) events. The eruptions involve major flares with soft X-ray peak flux greater than or equal to 5.0 x10(exp−5) Wm(exp−2) (i.e., flare size greater than or equal to M5.0) and accompanying coronal mass ejections (CMEs). The selection criterion was based on the fact that the only front-side GLE in cycle 24 (GLE 71) had a flare size of M5.1. Only approximately 37% of the major eruptions from the western hemisphere resulted in large SEP events. Almost the same number of large SEP events was produced in weaker eruptions (flare size less than M5.0), suggesting that the soft X-ray flare is not a good indicator of SEP or GLE events. On the other hand, the CME speed is a good indicator of SEP and GLE events because it is consistently high supporting the shock acceleration mechanism. We found the CME speed, magnetic connectivity to Earth (in longitude and latitude), and ambient conditions as the main factors that contribute to the lack of high-energy particle events during cycle 24. Several eruptions poorly connected to Earth (eastern-hemisphere or behind-the-west-limb events) resulted in very large SEP events detected by the Solar Terrestrial Relations Observatory (STEREO) spacecraft. Some very fast CMEs, likely to have accelerated particles to GeV energies, did not result in a GLE event because of poor latitudinal connectivity. The stringent latitudinal requirement suggests that the highest-energy particles are likely accelerated in the nose part of shocks, while the lower energy particles are accelerated at all parts. There were also well-connected fast CMEs, which did not seem to have accelerated high-energy particles due to possible unfavorable ambient conditions (high Alfven speed, overall reduction in acceleration efficiency in cycle 24).
IUE archive obserbations were used to obtain a new and independent estimate of the effective temperature of Sirius B. The observed Lyman alpha profile of Sirius B was modeled as a function of effective temperature and T(eff) = 24,500 + or - 500 K was found. This temperature is in good agreement with a recent result obtained from analysis of Exosat soft X-ray spectra of Sirius B. In addition to providing confirmation of the soft X-ray result, this temperature implies that Sirius B is significantly cooler and larger in radius than most previous estimates. The radius, R = 0.090 + or - 0.005 solar mass, implied by the lower temperature is well in excess of the radius of fully degenerate star having the mass of Sirius B. This investigation employed a unique set of SWP archive spectra, acquired with Sirius B in the small aperture, which have proved to be free of scattered light contamination from Sirius A.
Recent ROSAT images reported by Schmitt et el. show that the sunlit part of the Moon is a significant source of very soft x rays. Stimulated by these observations, Edwards et al. have made an analysis of the response of the Moon to the solar soft x ray and EUV spectrum. They argue that much of the observed emission is in the form of discrete fluorescence lines in the energy range 25 to 100 eV, and that these lines are generally much stronger than the adjacent directly scattered solar background. On this basis they suggest that soft x ray fluorescence can be used to remotely obtain high-precision elemental maps of the lunar surface. Edwards et al. have continued to develop this idea and have suggested a system using soft x ray telescopes in lunar orbit, which could also obtain very good spatial resolution. This combination could be extremely valuable in furthering our understanding of lunar chemistry and potential resource distributions. High spatial resolution combined with the thin surface layer from which these soft x rays arise suggests the exciting possibility that x ray telescopes could map lunar volcanic volatiles from orbit.
To determine the X-ray luminosity function of normal stars, 1700 stars brighter than 10th magnitude were surveyed by the imaging proportional counter aboard the Einstein Observatory. Seventy star positions were found to contain excess X-ray counting rates. The number of stars per square degree in a number of magnitude intervals was calculated as a function of spectral type and luminosity class, and the total number of stars for each spectral type brighter than magnitude 9.5 derived in this manner was compared with the 1700-star sample. The agreement is good, as is that between the surface density of soft X-ray sources and the number of stellar emitters predicted from the field star survey. It is concluded that stars probably do not contribute significantly to the diffuse soft X-ray background. The findings are consistent with the notion that stellar age and/or rotation velocity are important determinants of stellar X-ray emission level.
The paper describes a CCD camera facility designed and built for testing and characterization of CCDs in response to single X-ray photons in the 1-10 keV energy range. Results from the frontside-illuminated Fairchild 211 and 221 area imagers are presented; high quantum efficiency over the 3-6 keV range was verified. In order to avoid the problem of charge spreading at the higher energies, deep-depleted CCDs for soft X-ray imaging have been constructed, and good response was obtained at 6 keV. The present results are a first step toward the demonstration of the CCD as an appropriate device for at least the central part of the focal plane of a large X-ray telescope, e.g., the proposed Advanced X-ray Astrophysics Facility.
The relationship between the thermal energy released from 29 solar flares and the propagation features of their associated interplanetary shock waves that were detected at 1 AU is investigated. The 29 interplanetary shock waves were identified unambiguously and their tracking from each solar flare was deduced by tracking their associated interplanetary type-II radio emission. The thermal energy released in the solar flares was estimated from the time-intensity profiles of 1-8 A soft X-ray bursts from each flare. A good relationship is found between the flares' thermal energy with the IP shock-waves' transient velocity and arrival time at the earth - that is, the largest flare energy released is associated with the faster shock waves. Finally, a possible scenario of formation of a shock wave during the early phase of the flare and its propagation features is discussed.
The purpose of this proposal was to monitor the spectral variability of two luminous ULXs. One was awarded for study, in the galaxy NGC1365. The ULX NGC1365 X-1 is one of the few reported reaching X-ray luminosities near 10(exp 40) erg/s, and as such is a good IMBH candidate. The ULX was seen to vary in the ROSAT data. We now have 6 new observations: 1 archival Chandra observation and 5 observations we have obtained with XMM, including this proposal and a follow up XMM-Newton observation of NGC1365, aimed at studying the variable nuclear AGN. With this data set, we are studying in detail the spectral variability properties of this source. We observe a factor 4 variability among the XMM observation, with a peak luminosity approx.9 x 10(exp 39) ergs/s. There is also evidence of variability in the X-ray colors and spectral parameters. The last two XMM exposure of 60 ks each demonstrate that a simple power-law spectrum is not a good fit to the data, suggesting in both instances soft excesses, with possibly different temperatures.
Wozencraft and Kennedy have suggested that the appropriate demodulator criterion of goodness is the cut-off rate of the discrete memoryless channel created by the modulation system; the criterion of goodness adopted in this note is the symmetric cut-off rate which differs from the former criterion only in that the signals are assumed equally likely. Massey's necessary condition for optimal demodulation of binary signals is generalized to M-ary signals. It is shown that the optimal demodulator decision regions in likelihood space are bounded by hyperplanes. An iterative method is formulated for finding these optimal decision regions from an initial good quess. For additive white Gaussian noise, the corresponding optimal decision regions in signal space are bounded by hypersurfaces with hyperplane asymptotes; these asymptotes themselves bound the decision regions of a demodulator which, in several examples, is shown to be virtually optimal. In many cases, the necessary condition for demodulator optimality is also sufficient, but a counter example to its general sufficiency is given.
A comparison with K line, X-ray and other data, of 10830 A equivalent widths (EW) measurements in 890 image tube spectra of 455 stars shows that for the case of G stars, the EW correlates well with K line intensity. Good correlation is also found between 10830 A EW and soft X-ray fluxes, confirming the excitation of the line by coronal soft X-rays, which can serve as a measure of coronal emission. It is also found that, in contradiction to published models, 10830 A is weak or absent in O, B and A stars, and is absent in F and M supergiants. Moderate to high 10830 A EW is frequent in F and M dwarfs, G and K supergiants, and class K3 III. The 58 stars whose 10830 A EW was found to be of 300 A or more should be relatively intense X-ray emitters. Almost all RS CVn stars show strong 10830 A absorption, and T Tauri stars show both absorption and emission.
The determination of the location of the region of origin of hard X-rays is important in evaluating the importance of 10-100 keV electrons in solar flares and in understanding flare particle acceleration. At present only limb-occulted events are available to give some information on the height of X-ray emission. In fifteen months of OSO-7 operation, nine major soft X-ray events had no reported correlated H alpha flare. We examine the hard X-ray spectra of eight of these events with good candidate X-ray flare producing active regions making limb transit at the time of the soft X-ray bursts. All eight bursts had significant X-ray emission in the 30-44 keV range, but only one had flux at the 3 sigma level above 44 keV. The data are consistent with most X-ray emission occurring in the lower chromosphere, but some electron trapping at high altitudes is necessary to explain the small nonthermal fluxes observed.
A nine degree-of-freedom theoretical model is developed for investigations of the dynamics of a proprotor operating in high inflow axial flight on a cantilever wing. The basic characteristics of the rotor high inflow aerodynamics and the resulting rotor aeroelastic behavior are discussed. The problems of classical whirl flutter, the two-bladed rotor, and the influence of the proprotor on the stability derivatives of the aircraft are treated briefly. The influence of various elements of the theoretical model is discussed, including the modeling used for the blade and wing aerodynamics, and the influence of the rotor lag degree of freedom. The results from tests of two full-scale proprotors - a gimballed, stiff-inplane rotor and a hingeless, soft-inplane rotor - are presented; comparisons with the theoretical results show good correlation.
The X-ray sources in the Perseus cluster have been studied by many authors. Available data on the spatial and spectral distributions are examined and summarized. Based on these observations, a consistent model is proposed for the production of X-rays and gamma-rays in the region around NGC 1275. It is shown that good agreement with observations is obtained by assuming the emission of soft X-rays for thermal bremsstrahlung and of hard X-rays and gamma-rays from the inverse Compton process.
We have discovered decimetric signatures of the chromospheric evaporation process. Evidence for the radio detection of chromospheric evaporation is based on the radio-inferred values of (1) the electron density, (2) the propagation speed, and (3) the timing, which are found to be in good agreement with statistical values inferred from the blueshifted Ca XIX soft X-ray line. The physical basis of our model is that free-free absorption of plasma emission is strongly modified by the steep density gradient and the large temperature increase in the upflowing flare plasma. The steplike density increase at the chromospheric evaporation front causes a local discontinuity in the plasma frequency, manifested as almost infinite drift rate in decimetric type III bursts. The large temperature increase of the upflowing plasma considerably reduces the local free-free opacity (due to the T(exp -3/2) dependence) and thus enhances the brightness of radio bursts emitted at the local plasma frequency near the chromospheric evaporation front, while a high-frequency cutoff is expected in the high-density regions behind the front, which can be used to infer the velocity of the upflowing plasma. From model calculations we find strong evidence that decimetric bursts with a slowly drifting high-frequency cutoff are produced by fundamental plasma emission, contrary to the widespread belief that decimetric bursts are preferentially emitted at the harmonic plasma level. We analyze 21 flare episodes from 1991-1993 for which broadband (100-3000 MHz) radio dynamic spectra from Pheonix, hard X-ray data from (BATSE/CGRO) and soft X-ray data from Burst and Transient Source Experiment/Compton Gamma Ray Observatory (GOES) were available.
We have discovered decimetric signatures of the chromospheric evaporation process. Evidence for the radio detection of chromospheric evaporation is based on the radio-inferred values of (1) the electron density, (2) the propagation speed, and (3) the timing, which are found to be in good agreement with statistical values inferred from the blueshifted Ca xix soft X-ray line. The physical basis of our model is that free-free absorption of plasma emission is strongly modified by the steep density gradient and the large temperature increase in the upflowing flare plasma. The steplike density increase at the chromospheric evaporation front causes a local discontinuity in the plasma frequency, manifested as almost infinite drift rate in decimetric type III bursts. The large temperature increase of the upflowing plasma considerably reduces the local free-free opacity (due to the T-(exp -3/2) dependence) and thus enhances the brightness of radio bursts emitted at the local plasma frequency near the chromospheric evaporation front, while a high-frequency cutoff is expected in the high-density regions behind the front, which can be used to infer the velocity of the upflowing plasma. From model calculations we find strong evidence that decimetric bursts with a slowly drifting high-frequency cutoff are produced by fundamental plasma emission, contrary to the widespread belief that decimetric bursts are preferentially emitted at the harmonic plasma level. We analyzed 21 flare episodes from 1991-1993 for which broadband (100-3000 MHz) radio dynamic spectra from Phoenix, hard X-ray data from BATSE/CGRO, and soft X-ray data from GOES were available. We detected slowly drifting high-frequency cutoffs between 1.1 and 3.0 GHz, with drift rates of -41 +/- 32 MHz/s, extending over time intervals of 24 +/- 23 s. Developing a density model for type III-emitting flare loops based on the statistically observed drift rate of type III bursts by Alvarez & Haddock, we infer velocities of up to 360 km/s for the upflowing plasma, with an average of v(sub CE) = 236 +/- 130 km /s for episodes with 5-15 s duration. The mean electron density of the upflowing plasma is n(sub e) = 5.2(+/-3.1) x 10(exp 10) /cu cm when it is first detected in radio, at coronal altitudes of h(sub 0) = 9.2 +/- 2.3 Mm.