Search NASA⌕ Search

SEARCH · Search NASA

Results for “solar modules”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Improving perovskite solar module stability by understanding and mitigating scribe-induced chemo-thermomechanical degradation

Recognizing the correlation between the design of perovskite solar module (PSM) and their degradation mechanisms under environmental stressors helps to enable their long- term reliability. This work reports on the impact of the hole-transport layer (HTL) on thermal cyclability and degradation mechanisms of p-i-n PSMs by comparing 3 HTLs: NiO x , MeO-2PACz (a self-assembled monolayer), and a bilayer HTL of MeO-2PACz on NiO x . We observe surprising thermal cyclability from a performance standpoint despite generating clear degradation products. We find that without a fully dense HTL, seemingly insignificant moisture/oxygen ingress through the edge of the PSMs can lead to rapid destabilization of the metal halide perovskite (MHP) layer due to reactions between MHP degradation byproducts and the indium-tin oxide layer. We also show that illumination-induced cation phase segregation is dependent on the presence of an inactive area (regions of the substrate uncovered by the top electrode). As such, we find that a dense interface between the MHP and ITO is necessary for chemically robust PSMs and highlight criteria for testing field-relevant configurations in lab-scale architectures.

14 SOLAR ENERGY↗
DOE OSTI2026

Self-Leveling Inks for Printing Ultra-uniform Perovskite Solar Modules by Flexography

The report describes the development of scalable manufacturing methods for high-performance, stable perovskite solar modules using flexographic printing. The project developed self-leveling perovskite inks that exploit Marangoni flows to reduce coating defects and improve large-area film uniformity. Bayesian optimization was integrated with high-throughput photoluminescence mapping and photovoltaic measurements to efficiently optimize ink formulations and printing conditions. The resulting printed perovskite solar cells achieved champion power conversion efficiencies above 21.6%, with median efficiencies exceeding 20% across large device batches. At the module scale, printed devices achieved active-area efficiencies up to approximately 17.3% on 25 cm² substrates. The project also demonstrated improved performance and stability using additively patterned interconnections compared with laser-scribed controls. Overall, the work establishes a data-driven, roll-compatible pathway toward high-throughput, low-capital-cost manufacturing of uniform and stable perovskite photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2022

Area-Scalable Zn 2 SnO 4 Electron Transport Layer for Highly Efficient and Stable Perovskite Solar Modules

The development of a scalable chemical bath deposition (CBD) process facilitates the realization of electron-transporting layers (ETLs) for large-area perovskite solar modules (PSMs). In this work, a method to prepare a uniform and scalable thick Zn 2 SnO 4 ETL by CBD, which yielded high-performance PSMs, is reported. This Zn 2 SnO 4 ETL exhibits excellent electrical properties and enhanced optical transmittance in the visible region. Moreover, the Zn 2 SnO 4 ETL influences the perovskite layer formation, yielding enhanced crystallinity, increased grain size, and a smoother surface, thus facilitating electron extraction and collection from the perovskite to the ETL. Zn 2 SnO 4 thereby yields PSMs with a remarkable photovoltaic performance, low hysteresis index, and high device reproducibility. The champion PSM exhibited a power conversion efficiency (PCE) of 22.59%, being among the highest values published so far. In addition, the CBD Zn 2 SnO 4 -based PSMs exhibit high stability, retaining more than 88% of initial efficiency over 1000 h under continuous illumination. This demonstrates that CBD Zn 2 SnO 4 is an appropriate ETL for high-efficiency PSMs and a viable new process for their industrialization.

17 WIND ENERGY↗
NASA NTRS1977

Effects of particle drift on cosmic-ray transport. I - General properties, application to solar modulation

Although gradient and curvature drifts are explicitly contained in the general equations of cosmic-ray transport, they have been almost universally neglected in applications of these equations. The drifts are evaluated explicitly for the Parker (1965) spiral magnetic field, and it is shown that for particles with rigidities greater than about 0.3 GV in the solar wind, they are larger than the solar-wind velocity over much of the heliosphere. Hence most current models of solar modulation and solar-flare particle events neglect terms which in many cases are as important as those retained. Calculations are presented which demonstrate the importance of the effects for simple modulation models. It is concluded that comparisons of presently available model calculations with observations do not provide a fair test of transport theory since they neglect drifts, which may substantially reduce the net modulation.

Jokipii, J. R.↗
NASA NTRS1976

Solar modulation of galactic cosmic rays 4: Latitude dependent modulation

A numerical method is outlined for solving the equation which describes the solar modulation of cosmic rays in models where interplanetary conditions can vary with heliocentric latitude. As an illustration of the use of this method, it is shown how variations in the modulation with latitude could produce the small radial gradients in the intensity that were observed from the Pioneers 10 and 11 spacecraft.

Fisk, L. A.↗
NASA NTRS1983

A quantitative test of solar modulation theory - The proton, helium, and electron spectra from 1965 through 1979

The predictions of a conventional, spherically symmetric model of solar modulation have been compared with the measured spectra of positively and negatively charged galactic cosmic-ray particles at 1 AU throughout the 1965-1976 solar cycle and through the enhanced modulation of 1979. For the proton/helium, proton/electron, and helium/electron flux ratios, there is remarkably good agreement between theory and experiment, except for small differences in 1965 and 1969. Possible systematic experimental errors are discussed, and it is concluded that: (1) the 11 year modulation process is largely independent of the sign of the particle charge; and (2) the assumption of steady state is a fairly good approximation for long term modulation.

Evenson, P.↗
NASA NTRS1983

Solar modulation of galactic cosmic rays. V - Time-dependent modulation

A numerical technique is introduced for the solution of the time-dependent equation for the solar modulation of galactic cosmic rays, in which transport in heliographic latitude is ignored. We illustrate this method with a model for the solar cycle variation in cosmic ray intensity. The variation is assumed to result from changes in the number of enhanced cosmic ray scattering regions, which are produced by flare-generated shock waves in the solar wind. The model can account for the observed solar cycle variation in intensity at different energies as well as the observed spatial gradients. This model also provides a natural explanation for the cosmic ray hysteresis effect.

Perko, J. S.↗
NASA NTRS1987

Solar modulation of galactic antiprotons

Galactic antiproton data of current interest lie in an energy regime heavily influenced by solar modulation. Correcting for it needs to be done more carefully than it has been in the past. The well-known force-field analytic approximation of the spherically-symmetric, steady-state, cosmic-ray transport equation is applied in order to account for modulation down to at least 100 MeV. A sample solution which applies to the currently available antiproton data set (1979-80), and can be used to accurately modulate any possible interstellar antiproton spectrum, is given. The solution is easily adapted for comparison to future measurements. It also shows that boosting the low-energy (less than 600 MeV) side of the interstellar antiproton spectrum will not affect the low-energy spectrum at 1 AU, due to strong adiabatic deceleration during that time.

Perko, J. S.↗
NASA NTRS1994

Solar modulation and nuclear fragmentation effects in galactic cosmic ray transport through shielding

Crews of manned interplanetary missions may accumulate significant radiation exposures from the Galactic Cosmic Ray (GCR) environment in space. Estimates of how these dose levels are affected by the assumed temporal and spatial variations in the composition of the GCR environment, and by the effects of the spacecraft and body self-shielding on the transported fields are presented. In this work, the physical processes through which shielding alters the transported radiation fields are described. We then present estimates of the effects on model calculations of (1) nuclear fragmentation model uncertainties, (2) solar modulation, (3) variations between solar cycles, and (4) proposed changes to the quality factors which relate dose equivalent to absorbed dose.

Townsend, L. W.↗
NASA NTRS1976

Solar modulation and a galactic origin for the anomalous component observed in low-energy cosmic rays

The current theory of solar modulation can be used to argue that the cosmic-ray component at low energies, which is observed to have an anomalous composition, is not of galactic origin, i.e., it is not a component of the galactic cosmic-ray flux. The current theory predicts, from quite general considerations, that an unreasonably large intensity of cosmic rays, by many orders of magnitude, would be required in the interstellar medium to account for the observed fluxes. Conceivably, the current modulation theory could be modified so that only reasonable interstellar fluxes are predicted. One such modification involves an unusual scheme for particle diffusion in the interplanetary medium. Particles are assumed to diffuse not as a result of their own motion among small-scale irregularities in the magnetic field, but rather in a process in which they are trapped between time-varying constrictions in the large-scale field.

Fisk, L. A.↗
DOE OSTI2021

Recycling lead and transparent conductors from perovskite solar modules

Abstract Perovskite photovoltaics are gaining increasing common ground to partner with or compete with silicon photovoltaics to reduce cost of solar energy. However, a cost-effective waste management for toxic lead (Pb), which might determine the fate of this technology, has not been developed yet. Here, we report an end-of-life material management for perovskite solar modules to recycle toxic lead and valuable transparent conductors to protect the environment and create dramatic economic benefits from recycled materials. Lead is separated from decommissioned modules by weakly acidic cation exchange resin, which could be released as soluble Pb(NO 3 ) 2 followed by precipitation as PbI 2 for reuse, with a recycling efficiency of 99.2%. Thermal delamination disassembles the encapsulated modules with intact transparent conductors and cover glasses. The refabricated devices based on recycled lead iodide and recycled transparent conductors show comparable performance as devices based on fresh raw materials. Cost analysis shows this recycling technology is economically attractive.

14 SOLAR ENERGY↗