Search NASA⌕ Search

SEARCH · Search NASA

Results for “source strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The location of the source of high-frequency solar acoustic oscillations

Recently Libbrecht and Jefferies et al. have reported regular peaks in the solar oscillation power spectrum extending well above 5.3 mHz, the maximum frequency of trapped acoustic modes. Kumar et al. argued that these peaks are primarily due to the interference of traveling waves which are excited due to acoustic emission from turbulent convection. In contrast with the standing wave P-mode frequencies below 5.3 mHz, the positions of the high-frequency interference peaks (HIPs) are dependent on the location of the source of the acoustic oscillations. In the present work, Kumar et al.'s argument is strengthened, and more importantly, use is made of the above dependence to determine the acoustic source strength as a function of depth. It is found that the acoustic source profile, and thus the convective velocity, is peaked about 200 km deeper than what is expected from standard mixing length theory.

Kumar, Pawan↗

Direct Measurement of Wave Kernels in Time-Distance Helioseismology

Solar f-mode waves are surface-gravity waves which propagate horizontally in a thin layer near the photosphere with a dispersion relation approximately that of deep water waves. At the power maximum near 3 mHz, the wavelength of 5 Mm is large enough for various wave scattering properties to be observable. Gizon and Birch (2002,ApJ,571,966)h ave calculated kernels, in the Born approximation, for the sensitivity of wave travel times to local changes in damping rate and source strength. In this work, using isolated small magnetic features as approximate point-sourc'e scatterers, such a kernel has been measured. The observed kernel contains similar features to a theoretical damping kernel but not for a source kernel. A full understanding of the effect of small magnetic features on the waves will require more detailed modeling.

Duvall, T. L., Jr.↗

Noise Generation in Hot Jets

A prediction method based on the generalized acoustic analogy is presented, and used to evaluate aerodynamic noise radiated from high speed hot jets. The set of Euler equations are split into their respective non-radiating and residual components. Under certain conditions, the residual equations are rearranged to form a wave equation. This equation consists of a third-order wave operator, plus a number of nonlinear terms that are identified with the equivalent sources of sound and their statistical characteristics are modeled. A specialized RANS solver provides the base flow as well as turbulence quantities and temperature fluctuations that determine the source strength. The main objective here is to evaluate the relative contribution from various source elements to the far-field spectra and to show the significance of temperature fluctuations as a source of aerodynamic noise in hot jets.

Khavaran, Abbas↗

Nitrogen oxides in the troposphere - Global and regional budgets

The cycle of nitrogen oxides in the troposphere is discussed from both global and regional perspectives. Global sources for NO(x) are estimated to be of magnitude 50 (+ or - 25) x 10 to the 12th gm N/yr. Nitrogen oxides are derived from combustion of fossil fuels (40 percent) and biomass burning (25 percent) with the balance from lightning and microbial activity in soils. Estimates for the rate of removal of NOx based on recent atmospheric and precipitation chemistry data are consistent with global source strengths derived here. Industrial and agricultural activities provide approximately two thirds of the global source for NOx. In North America, sources from combustion of fossil fuels exceed natural sources by a factor of 3-13. Wet deposition removes about one third of the combustion source of NOx over North America, while dry deposition removes a similar amount. The balance is exported from the continent. Deposition of nitrate in precipitation over eastern Canada and the western Atlantic is clearly influenced by sources of NOx in the eastern United States.

Logan, J. A.↗

Correlated flux densities from VLBI observations with the DSN

Correlated flux densities of extragalactic radio sources in the very long baseline interferometry (VLBI) astrometric catalog are required for the VLBI tracking of Galileo, Mars Observer, and future missions. A system to produce correlated and total flux density catalogs was developed to meet these requirements. A correlated flux density catalog of 274 sources, accurate to about 20 percent, was derived from more than 5000 DSN VLBI observations at 2.3 GHz (S-band) and 8.4 GHz (X-band) using 43 VLBI radio reference frame experiments during the period 1989-1992. Various consistency checks were carried out to ensure the accuracy of the correlated flux densities. All observations were made on the California-Spain and California-Australia DSN baselines using the Mark 3 wideband data acquisition system. A total flux density catalog, accurate to about 20 percent, with data on 150 sources, was also created. Together, these catalogs can be used to predict source strengths to assist in the scheduling of VLBI tracking passes. In addition, for those sources with sufficient observations, a rough estimate of source structure parameters can be made.

Coker, R. F.↗

RWF rotor-wake-fuselage code software reference guide

The RWF (Rotor-Wake-Fuselage) code was developed from first principles to compute the aerodynamics associated with the complex flow field of helicopter configurations. The code is sized for a single, multi-bladed main rotor and any configuration of non-lifting fuselage. The mathematical model for the RWF code is based on the integration of the momentum equations and Green's theorem. The unknowns in the problem are the strengths of prescribed singularity distributions on the boundaries of the flow. For the body (fuselage) a surface of constant strength source panels is used. For the rotor blades and rotor wake a surface of constant strength doublet panels is used. The mean camber line of the rotor airfoil is partitioned into surface panels. The no-flow boundary condition at the panel centroids is modified at each azimuthal step to account for rotor blade cyclic pitch variation. The geometry of the rotor wake is computers at each time step of the solution. The code produces rotor and fuselage surface pressures, as well as the complex geometry of the evolving rotor wake.

Berry, John D.↗

The strong UV source in the active E Galaxy NGC 4552

1200-3200 A IUE spectra of the nucleus of NGC 4552 (M89) were obtained in order to investigate the nature of the strong 10 micron source in this Galaxy. There is a strong, extended UV source in NGC 4552 which has a spatial distribution nearly identical with that at optical wavelengths and is undoubedly stellar in origin. Its properties are consistent with the correlation between UV source strength and metallicity pointed out by Faber (1983). There is no evidence for a nonthermal point source in the UV. It appears unlikely that the 10 micron emission is from heated dust grains. Instead, it is believed the 10 micron radiation is nonthermal in origin, implying a remarkably small size of only 0.1 AU for this source.

Oconnell, R. W.↗

A practical approach to helicopter internal noise prediction

A practical and well correlated procedure for predicting helicopter internal noise is presented. It accounts for the propagation of noise along multiple paths on an octave by octave basis. The method is sufficiently general to be applicable to conventional helicopters as well as other aircraft types, when the appropriate structural geometry, noise source strengths, and material acoustic properties are defined. A guide is provided for the prediction of various helicopter noise sources over a wide range of horsepower for use when measured data are not available. The method is applied to the prediction of the interior levels of the Civil Helicopter Research Aircraft (CHRA), both with and without soundproofing installed. Results include good correlation with measured levels and prediction of the speech interference level within 1.5 db at all conditions. A sample problem is also shown illustrating the use of the procedure. This example calculates the engine casing noise observed in the passenger cabin of the CHRA.

Levine, L. S.↗

Modeling the Absorbing Aerosol Index

We propose a scheme to model the absorbing aerosol index and improve the biomass carbon inventories by optimizing the difference between TOMS aerosol index (AI) and modeled AI with an inverse model. Two absorbing aerosol types are considered, including biomass carbon and mineral dust. A priori biomass carbon source was generated by Liousse et al [1996]. Mineral dust emission is parameterized according to surface wind and soil moisture using the method developed by Ginoux [2000]. In this initial study, the coupled CCM1 and GRANTOUR model was used to determine the aerosol spatial and temporal distribution. With modeled aerosol concentrations and optical properties, we calculate the radiance at the top of the atmosphere at 340 nm and 380 nm with a radiative transfer model. The contrast of radiance at these two wavelengths will be used to calculate AI. Then we compare the modeled AI with TOMS AI. This paper reports our initial modeling for AI and its comparison with TOMS Nimbus 7 AI. For our follow-on project we will model the global AI with aerosol spatial and temporal distribution recomputed from the IMPACT model and DAO GEOS-1 meteorology fields. Then we will build an inverse model, which applies a Bayesian inverse technique to optimize the agreement of between model and observational data. The inverse model will tune the biomass burning source strength to reduce the difference between modelled AI and TOMS AI. Further simulations with a posteriori biomass carbon sources from the inverse model will be carried out. Results will be compared to available observations such as surface concentration and aerosol optical depth.

Penner, Joyce↗

Is Jupiter's ionosphere a significant plasma source for its magnetosphere?

A semikinetic model was used to study the steady state, collisionless, polar wind outflow from the Jovian polar caps. H(+)-escape fluxes and energies were calculated for a range of conditions, including several values of the ambient electron temperature, different hot electron populations, and both with and without the effects of the centrifugal force. The calculations indicate that if hot electron populations exist over the Jovian polar caps, as they do on earth, polar wind escape fluxes of the order of 10 to the 8th per sq cm s are possible. When integrated over the polar cap area, escape fluxes of this order of magnitude imply an ionospheric source strength of 2 x 10 to the 28th ions/s, which is comparable to the present estimate of the total magnetospheric plasma source population. Therefore, the ionosphere may play an important role in populating the Jovian magnetosphere, specifically the hidden, low energy, light ion component of the population.

Nagy, A. F.↗

Differential Very Long Baseline Interferometry for 50 nanoradian deep space navigation - Results from quasar pair experiments

Deep space tracking experiments completed at JPL have demonstrated a 50-nanoradian angular positioning accuracy with wideband differential Very Long Baseline Interferometry (delta VLBI). This meets the stringent navigation requirements of NASA's Galileo mission, scheduled for launch in May 1986 and for encounter with Jupiter in December 1988. Pairs of extragalactic radio sources (quasars) with well-known coordinates were used to simulate deep space navigation passes in which quasar-spacecraft pairs are observed. This paper discusses the accuracy of the delta VLBI technique and how it is affected by source separations, source elevations, source strengths, solar plasma and ionosphere. Several observation strategies are discussed and one is shown to be especially effective in minimizing these major error sources.

Trinkle, B. K.↗

A higher order panel method for linearized supersonic flow

The basic integral equations of linearized supersonic theory for an advanced supersonic panel method are derived. Methods using only linear varying source strength over each panel or only quadratic doublet strength over each panel gave good agreement with analytic solutions over cones and zero thickness cambered wings. For three dimensional bodies and wings of general shape, combined source and doublet panels with interior boundary conditions to eliminate the internal perturbations lead to a stable method providing good agreement experiment. A panel system with all edges contiguous resulted from dividing the basic four point non-planar panel into eight triangular subpanels, and the doublet strength was made continuous at all edges by a quadratic distribution over each subpanel. Superinclined panels were developed and tested on s simple nacelle and on an airplane model having engine inlets, with excellent results.

Ehlers, F. E.↗

Reducing Propulsion Airframe Aeroacoustic Interactions with Uniquely Tailored Chevrons: Isolated Nozzles - 1.

The flow/acoustic environment surrounding an engine nozzle installed on an airplane, say, under the wing, is asymmetric due to the pylon, the wing and the interaction of the exhaust jet with flaps on the wing. However, the conventional chevrons, which are azimuthally uniform serrations on the nozzle lip, do not exploit the asymmetry due to these propulsion airframe aeroacoustic interactions to reduce jet noise. In this pioneering study we use this non-axisymmetry to our advantage and examine if the total jet-related noise radiated to the ground can be reduced by using different types of azimuthally varying chevrons (AVC) which vary the mixing around the nozzle periphery. Several scale models of the isolated nozzle, representative of high bypass ratio engine nozzles, were made with a pylon and azimuthally varying chevrons on both fan and core nozzles to enhance mixing at the top (near the pylon) with less mixing at the bottom (away from the pylon) or vice versa. Various combinations of fan and core AVC nozzles were systematically tested at typical take-off conditions inside a free jet wind-tunnel and, here, in Part 1 we analyze the acoustics results for the isolated nozzle with a pylon, with installation effects reported in Parts 2 and 3. Several interesting results are discovered: amongst the fan AVCs the top-enhanced mixing T-fan chevron nozzle is quieter in combination with any core AVC nozzle when compared to conventional chevrons; however, the bottom-mixing B-fan chevrons, as well as the core AVC nozzles, by themselves, are noisier. Further, the low-frequency source strengths in the jet plume, obtained via phased microphone arrays, also corroborate the far field sound, and for the T-fan chevrons such sources move further downstream than those for baseline or conventional chevron nozzles.

Mengle, Vinod G.↗

Mapping Rice Production in China with AVHRR Imagery

The study of rice agriculture is necessary for both the importance of rice as a vital food source and because of the fact that cultivating it has an unfortunate byproduct, namely methane gas. As a food source, rice is a staple for a large majority of the world's population, especially in Asia. Because the populations of many Asian nations are increasing at rapid rates, the production of rice will need to similarly increase. In 1989, it was estimated that the demand for rice would increase by 65% by the year 2019. Rice crops are considered to be one of the primary anthropogenic sources of methane gas. A reason for concern is that this gas is a so-called "greenhouse" trace gas and given its increasing levels in the atmosphere, is thought to contribute to the suspected global warming phenomenon. Some estimate that methane may contribute up to 20% to the global warming effect. Trace gas emissions from anthropogenic sources is an issue that generates great worldwide interest because of the fact that mankind is very likely affecting the current and future climate in potentially negative ways. In an effort to better understand these effects, scientists and engineers are conducting research on all of the varied fronts which relate to climate change and biosphere/atmosphere interactions. The study of global warming through increasing concentrations of greenhouse gases is one area which has received much media and scientific attention. Research fueled by debates on this topic is being conducted on numerous, interrelated fronts in an effort to better understand the complex relationship between human activities and the earth's climate. The research ranges from attempting to verify if the observed data even supports the existence of an anthropogenically generated global-warming phenomenon, to identification of sources and sinks of the trace gases, to measuring the source strengths, to studies which focus on modeling the processes which generate the gases, and finally, to trying to project their impact on the global climatic system. Some of the more commonly known sources of greenhouse gases are related to industry and transportation. Carbon dioxide, CO2, from automobile emissions is one such example. Lesser known are sources from natural and cultivated vegetation, such as the methane, CH4, resulting from rice cropping. While the concentration of atmospheric methane is significantly less than that of carbon dioxide, CH4 has been estimated to have up to 32 times the insulating capability of carbon dioxide, making it an important gas to monitor. The remainder of this chapter will provide some additional background information on the effects of atmospheric methane, and the role that rice agriculture plays as a source in the methane budget. This will be followed by a brief description of efforts to model this source of atmospheric methane. Finally, this chapter will end with a statement of the hypotheses of this thesis, at which time a description of the information contained in the rest of this document will be provided.

Paliouras, Eleni J.↗

A new model of atmospheric gamma rays and its implications for measurement of diffuse cosmic gamma rays from within the atmosphere

A semi-empirical model is discussed which describes atmospheric gamma rays in the range 0.3 less then or equal to E less than or equal to 10 MeV based on the production per unit mass of air. The model is based on the concept of a source strength (photon/g sec MeV) which is energy- and depth-dependent, and derived from measured fluxes. Quantities such as directional fluxes, angular distributions, and growth curves are calculated directly from this model. The source function is described by four energy-dependent parameters determined empirically from fluxes measured with a 7.5 cm x 7.5 cm Nal counter over the atmospheric depth range from 3.5 to 500 g/sq cm. From S(E,x), obtained for both continuum and discrete gamma rays at lambda = 40 deg, the depth and angle dependence of directional fluxes were calculated. Growth-curve predictions needed to separate atmospheric from diffuse cosmic fluxes were determined.

Matteson, J. L.↗

A generalized method for optimization of active noise controllers in three-dimensional spaces

In this investigation, the formulation of an optimal active noise controller for harmonic, enclosed sound fields is derived using an indirect boundary element method. The optimal active noise controller is defined as the volume velocity secondary source strengths which minimize the sound pressure level at a number of discrete interior locations. In addition, the formulation of an optimal active noise controller which minimizes the free field power radiated from a generalized, distributed noise source is presented. Representative results are provided for each formulation. For the enclosure problem, results are given for global control, local control, and passive wall treatments using a rectangular cavity. For the free field radiation problem, the effects of secondary source location and quantity on active noise controller performance are investigated. The relative merits of each formulation are discussed.

Mollo, C. G.↗

Sources and sinks of energetic electrons and protons in Saturn's magnetosphere

The paper deals with some results of continuing analysis and interpretation of energetic particle observations made onboard Pioneer 11 during its August-September 1979 encounter with Saturn. Source strength estimates and the radial dependence of the phase space density of protons of energies above 80 MeV indicate with some confidence that the cosmic-ray neutron albedo from the planets atmosphere and rings is the source of these particles.

Van Allen, J. A.↗

Io's Sodium Corona and Spatially Extended Cloud: A Consistent Flux Speed Distribution

For Io neutral cloud calculations, an SO2 source strength of approximately 4x10(exp 27) molecules/sec was determined by successfully matching the SO2(+) density profile near the satellite deduced from magnetometer data acquired by the Galileo spacecraft during its close flyby on December 7, 1995. The incomplete collision source velocity distribution for SO2 is the same as recently determined for the trace species atomic sodium by Smyth and Combi (1997). Estimates for the total energy loss rate (i.e. power) of O and S atoms escaping Io were also determined and imply a significant pickup current and a significant reduction in the local planetary magnetic field near Io.

Smyth, William H.↗