Search NASA⌕ Search

SEARCH · Search NASA

Results for “spacecraft thermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Minimally Intrusive Single-Chip Recession/Temperature Sensors for Spacecraft Thermal Protection Systems

We report the initial results of ongoing development of minimally intrusive, single-chip integrated capacitive recession/temperature sensors that would provide real-time monitoring of ablation recession of heatshield thermal protection systems (TPS) during spacecraft atmospheric entry. This work, which was performed using Phenolic Impregnated Carbon Ablator (PICA), is also to demonstrate the ease of sensor insertion during TPS manufacturing, thereby resulting in faster, low-cost, uniform sensor assembly, and spatial distribution, without compromising TPS structural integrity. Using oxy-acetylene flame at 500 W-cm-2 heat flux for 16 seconds, the average recession depth of 3.25 mm was obtained. Some measurement problems were encountered in this first attempt. However, the initial results obtained are in relatively good agreement with published data, and offer promise of future improvement based on lessons learned.

Recession↗
NASA NTRS1971

Vacuum and ultraviolet radiation effects on binders and pigments for spacecraft thermal control coatings

An evaluation of several silicone resin binders and powdered inorganic pigments for potential use in spacecraft thermal-control paint formulations is presented. The pigments were selected on the basis of a hypothesis relating the heat of formation of a compound to the compound's resistance to ultra-radiation-induced degradation. Reflectance measurements were made in situ to determine degradation rates due to ultraviolet radiation. The tested polydimethylsiloxane resins were not significantly affected by long exposures to ultraviolet radiation. All the pigments, which were dispersed in a polydimethylsiloxane resin, were degraded by ultraviolet radiation as determined by an increase of solar absorptance. For the materials evaluated in this study, no evidence was found to indicate that pigments with high heats of formation were resistant to ultraviolet degradation.

Progar, D. J.↗
NASA NTRS1973

Spacecraft thermal control

Guidance for the assessment and control of spacecraft temperatures is provided with emphasis on unmanned spacecraft in the space environment. The heat balance, elements of thermal design, and thermal control are discussed along with thermal testing, design criteria, and recommended practices.

Source record↗
NASA NTRS2019

Follow-on studies using the Voyager spacecraft thermal model

The 42-year-old Voyager mission, now named the Voyager Interstellar Mission (VIM) is operating long beyond its design life. In 2012, Voyager 1 crossed the heliopause into interstellar space and Voyager 2 made the same transit in November 2018. Due to declining power output from the Radioisotope Thermoelectric Generators (RTGs) the Science and Flight Operations teams continue to make difficult choices in terms of managing both the power and thermal margins to preserve critical science observations and maintain the health of the two spacecraft. A previous paper, “Creating a Voyager Thermal Model 39 Years Into the Flight Mission, Along With Model Correlation and Application” described how a thermal model of these 1977 spacecraft was developed and correlated without many design artifacts and with limited temperature telemetry. This paper describes how the thermal model has been used to establish an Allowable Flight Temperature (AFT) limit for hydrazine propellant in the propulsion subsystem to minimize the risk of freezing. Voyager 2 temperatures have already descended to this limit in the vicinity of the Roll thruster propellant lines. The Flight Operations team has investigated several ways of detecting propellant freezing based on analysis and trending of thruster performance telemetry. In addition, the Voyager thermal model is being used to predict the spacecraft response to possible changes in power state. These changes could involve turning off outboard science instruments and/or their heaters to increase power margin and hence power dissipation inside the spacecraft bus (i.e. in Bay 7, where the power regulation electronics are located). Changes might also be made to turn on or off other loads inside the bus to more effectively heat the coldest propellant lines.

Medina, Enrique↗
NASA NTRS2019

Follow-on studies using the Voyager spacecraft thermal model

The 42-year-old Voyager mission, now named the Voyager Interstellar Mission (VIM) is operating long beyond its design life. In 2012, Voyager 1 crossed the heliopause into interstellar space and Voyager 2 made the same transit in November 2018. Due to declining power output from the Radioisotope Thermoelectric Generators (RTGs) the Science and Flight Operations teams continue to make difficult choices in terms of managing both the power and thermal margins to preserve critical science observations and maintain the health of the two spacecraft. A previous paper, “Creating a Voyager Thermal Model 39 Years Into the Flight Mission, Along With Model Correlation and Application” described how a thermal model of these 1977 spacecraft was developed and correlated without many design artifacts and with limited temperature telemetry. This paper describes how the thermal model has been used to establish an Allowable Flight Temperature (AFT) limit for hydrazine propellant in the propulsion subsystem to minimize the risk of freezing. Voyager 2 temperatures have already descended to this limit in the vicinity of the Roll thruster propellant lines. The Flight Operations team has investigated several ways of detecting propellant freezing based on analysis and trending of thruster performance telemetry. In addition, the Voyager thermal model is being used to predict the spacecraft response to possible changes in power state. These changes could involve turning off outboard science instruments and/or their heaters to increase power margin and hence power dissipation inside the spacecraft bus (i.e. in Bay 7, where the power regulation electronics are located). Changes might also be made to turn on or off other loads inside the bus to more effectively heat the coldest propellant lines. Many of these changes have been or will be tested first on Voyager 1 which has more power margin and does not have the power matrix commanding issues experienced on Voyager 2. Ultimately this assessment may assist the Voyager project in making decisions on the order in which science instruments are permanently turned off.

Medina, Enrique↗
NASA NTRS1985

Use of two-phase flow heat transfer method in spacecraft thermal system

In space applications, weight, volume and power are critical parameters. Presently liquid freon is used in the radiator planels of the Space Shuttle to dissipate heat. This requires a large amount of freon, large power for pumps, large volume and weight. Use of two-phase flow method to transfer heat can reduce them significantly. A modified commercial vapor compression refrigerator/freezer was sucessfully flown in STS-4 to study the effect of zero-gravity on the system. The duty cycle was about 5 percent higher in flight as compared to that on earth due to low flow velocity in condenser. The vapor Reynolds number at exit was about 4000 as compared to about 12,000. Efforts are underway to design a refrigerator/freezer using an oil-free compressor for Spacelab Mission 4 scheduled to fly in January 1986. A thermal system can be designed for spacecraft using the two-phase flow to transfer heat economically.

Hye, A.↗
NASA NTRS1993

The Earth Observing System AM Spacecraft - Thermal Control Subsystem

Mission requirements for the EOS-AM Spacecraft intended to monitor global changes of the entire earth system are considered. The spacecraft is based on an instrument set containing the Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER), Clouds and Earth's Radiant Energy System (CERES), Multiangle Imaging Spectro-Radiometer (MISR), Moderate-Resolution Imaging Spectrometer (MODIS), and Measurements of Pollution in the Troposphere (MOPITT). Emphasis is placed on the design, analysis, development, and verification plans for the unique EOS-AM Thermal Control Subsystem (TCS) aimed at providing the required environments for all the onboard equipment in a densely packed layout. The TCS design maximizes the use of proven thermal design techniques and materials, in conjunction with a capillary pumped two-phase heat transport system for instrument thermal control.

Chalmers, D.↗
NASA NTRS2000

MEMS based pumped liquid cooling systems for micro/nano spacecraft thermal control

The electronic and other payload power densities in future micro/nano spacecraft are expected to exceed 25 Watts/cm(sup 2) and require advanced thermal control concepts and technologies to keep their payload within allowable temperature limits. This paper presents background on the need for pumped liquid cooling systems for future micro/nano spacecraft and results from this ongoing experimental investigation.

cooling system thermal control microspacecraft↗
NASA NTRS2006

A low cost imaging displacement measurement system for spacecraft thermal vacuum testing

A low cost imaging displacement technique suitable for use in thermal vacuum testing was built and tested during thermal vacuum testing of the space infrared telescope facility (SIRTF, later renamed Spitzer infrared telescope facility). The problem was to measure the relative displacement of different portions of the spacecraft due to thermal expansion or contraction. Standard displacement measuring instrumentation could not be used because of the widely varying temperatures on the spacecraft and for fear of invalidating the thermal vacuum testing. The imaging system was conceived, designed, purchased, and installed in approximately 2 months at very low cost. The system performed beyond expectations proving that sub millimeter displacements could be measured from over 2 meters away. Using commercial optics it was possible to make displacement measurements down to 10 (mu)m. An automated image processing tool was used to process the data, which not only speeded up data reduction, but showed that velocities and accelerations could also be measured. Details of the design and capabilities of the system are discussed along with the results of the test on the observatory. Several images from the actual test are presented.

thermal vacuum↗
NASA NTRS1982

Spacecraft thermal balance testing using infrared sources

A thermal balance test (controlled flux intensity) on a simple black dummy spacecraft using IR lamps was performed and evaluated, the latter being aimed specifically at thermal mathematical model (TMM) verification. For reference purposes the model was also subjected to a solar simulation test (SST). The results show that the temperature distributions measured during IR testing for two different model attitudes under steady state conditions are reproducible with a TMM. The TMM test data correlation is not as accurate for IRT as for SST. Using the standard deviation of the temperature difference distribution (analysis minus test) the SST data correlation is better by a factor of 1.8 to 2.5. The lower figure applies to the measured and the higher to the computer-generated IR flux intensity distribution. Techniques of lamp power control are presented. A continuing work program is described which is aimed at quantifying the differences between solar simulation and infrared techniques for a model representing the thermal radiating surfaces of a large communications spacecraft.

Tan, G. B. T.↗
NASA NTRS2005

Utilizing Radioisotope Power System Waste Heat for Spacecraft Thermal Management

One of the advantages of using a Radioisotope Power System (RPS) for deep space or planetary surface missions is the readily available waste heat, which can be used to maintain electronic components within a controlled temperature range, to warm propulsion tanks and mobility actuators, and to gasify liquid propellants. Previous missions using Radioisotope Thermoelectric Generators (RTGs) dissipated a very large quantity of waste heat due to the relatively low efficiency of the thermoelectric conversion technology. The next generation RPSs, such as the 110-watt Stirling Radioisotope Generator (SRG110) will have much higher conversion efficiencies than their predecessors and therefore may require alternate approaches to transferring waste heat to the spacecraft. RTGs, with efficiencies of approx. 6 to 7% and 200 C housing surface temperatures, would need to use large and heavy radiator heat exchangers to transfer the waste heat to the internal spacecraft components. At the same time, sensitive spacecraft instruments must be shielded from the thermal radiation by using the heat exchangers or additional shields. The SRG110, with an efficiency around 22% and 50 C nominal housing surface temperature, can use the available waste heat more efficiently by more direct heat transfer methods such as heat pipes, thermal straps, or fluid loops. The lower temperatures allow the SRG110 much more flexibility to the spacecraft designers in configuring the generator without concern of overheating nearby scientific instruments, thereby eliminating the need for thermal shields. This paper will investigate using a high efficiency SRG110 for spacecraft thermal management and outline potential methods in several conceptual missions (Lunar Rover, Mars Rover, and Titan Lander) to illustrate the advantages with regard to ease of assembly, less complex interfaces, and overall mass savings.

Pantano, David R.↗
NASA NTRS1977

Advanced spacecraft thermal control techniques

The problems of rejecting large amounts of heat from spacecraft were studied. Shuttle Space Laboratory heat rejection uses 1 kW for pumps and fans for every 5 kW (thermal) heat rejection. This is rather inefficient, and for future programs more efficient methods were examined. Two advanced systems were studied and compared to the present pumped-loop system. The advanced concepts are the air-cooled semipassive system, which features rejection of a large percentage of the load through the outer skin, and the heat pipe system, which incorporates heat pipes for every thermal control function.

Fritz, C. H.↗
NASA NTRS1995

Mechanical Pumped Cooling Loop for Spacecraft Thermal Control

Passive elements such as surface finishes, insulation, thermostats, radiators and louvers help keep spacecraft temperatures within the required limits. Mechanically pumped, single-phase cooling loops have been used for short-term applications such as the Space Shuttle. They are flexible, robust, and allow thermal autonomy. A lack of design heritage limits their use to shorter missions .

passive↗