Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electro-optic characterization of synthesized infrared-visible light fields

The measurement and control of light field oscillations enable the study of ultrafast phenomena on sub-cycle time scales. Electro-optic sampling (EOS) is a powerful field characterization approach, in terms of both sensitivity and dynamic range, but it has not reached beyond infrared frequencies. Here, we show the synthesis of a sub-cycle infrared-visible pulse and subsequent complete electric field characterization using EOS. The sampled bandwidth spans from 700 nm to 2700 nm (428 to 110 THz). Tailored electric-field waveforms are generated with a two-channel field synthesizer in the infrared-visible range, with a full-width at half-maximum duration as short as 3.8 fs at a central wavelength of 1.7 µm (176 THz). EOS detection of the complete bandwidth of these waveforms extends it into the visible spectral range. To demonstrate the power of our approach, we use the sub-cycle transients to inject carriers in a thin quartz sample for nonlinear photoconductive field sampling with sub-femtosecond resolution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Explosion dynamics of thin flat foils at high current density

This paper presents characteristic features of the explosion of thin flat foils for currents and pulse risetimes ranging from 8 kA at 350 ns to 1000 kA at ~100 ns. Foils made of aluminum, copper, nickel, and titanium with thicknesses of 1–100 µm are tested. Various diagnostics in the optical, UV, and x-ray spectral ranges are used to image the exploding foils from initial breakdown to complete destruction or pinching. It is shown that foil explosion is a complex process that depends on many factors, but features common to all foils are found that do not depend on the parameters of the generators or, accordingly, on the energy deposited in the foil: for example, the breakdown of flat foils under different conditions occurs at the edges of the foil. For the first time, the formation of a precursor over the central part of the foil is shown, which significantly changes the dynamics of the foil explosion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Laboratory Data on the EUV/Soft-X-Ray Flux Problem of Fe XVIII and Fe XIX

Observations by the spacecraft Extreme Ultraviolet Explorer (EUVE), Far Ultraviolet Spectroscopic Explorer (FUSE), Chandra, and XMM-Newton of Capella (α Aurigae) have encountered problems with the relative intensities of the Fe XVIII and Fe XIX line emission in the soft-X-ray (XUV) and extreme-ultraviolet spectral ranges versus various model predictions based on theoretical atomic data. The reason may either lie in astrophysical phenomena, e.g., at emission or because of absorption by the interstellar medium, in the theoretical atomic data, in one or more spectrometer calibrations, or in the spectral modeling. Here, by measurements using an electron beam ion trap we provide laboratory data obtained under conditions that are reasonably close to stellar emission regions. The laboratory data on Fe XVIII and Fe XIX show line ratios that are rather similar to the observations of Capella. The measurements, therefore, rule out astrophysical phenomena and calibration errors and point to issues with the modeling of the observed Capella emission.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Roadmap for Photonics with 2D Materials

Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

2D materials↗
DOE OSTI2022

Ultrafast infrared plasmon switching in aligned carbon-nanotube optical resonators

Reconfigurable plasmonic materials are crucial components in active photonic devices for optical communication, signal processing, and sensing applications. Certain candidates including transparent conducting oxides, small-bandgap semiconductors (i.e. Ge, InSb), and conducting polymers can exhibit switchable free carrier concentrations triggered by optical, electrical or thermal excitations. Here, we show that aligned films of single-walled carbon nanotubes (SWCNTs) can serve as all-optically tunable plasmonic material in the mid-infrared range, thereby adding them to the library of switchable plasmonic materials. Interband optical pumping with femtosecond laser pulses results in the photoexcitation of free charge carriers, which transiently blueshifts the plasmon resonances of patterned, periodic SWCNT nano-resonators spanning the mid-infrared spectral range from 1700 to 2700 cm -1 . Furthermore. the ultrafast plasmon modulation exhibits a nearly single-picosecond decay time, attributed to interband carrier relaxation and inter-tube charge transfer. Given that aligned films of SWCNTs have high thermal stability, excellent photostability, epsilon-near-zero property, and extremely large optical anisotropy, their dynamic tunability represents a promising pathway towards active optical devices in the technologically important mid-infrared range.

single-walled carbon nanotubes↗
DOE OSTI2022

Hybrid method for monitoring large Fabry-Pérot cavity displacements with nanometer precision

The change in length of an optical fiber-based Fabry-Pérot cavity (FPC) can be precisely measured using phase tracking, but the displacement range is limited by phase ambiguity. Period tracking techniques determine the absolute FPC length, but with larger uncertainties from tracking the spacing between multiple peaks. A hybrid method is demonstrated that identifies appropriate peaks for phase tracking using a coarse estimate obtained from the free spectral range to effectively maintain the high precision (∼1 nm) of phase tracking techniques to measure ∼24 µ m displacements, well beyond the range limitations (typically <1 µ m) of phase tracking methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Tailoring optical response of MXene thin films

Due to their attractive optical properties, 2D MXenes have garnered interest in nanophotonic and optoelectronic applications. However, tuning their properties typically requires the iterative synthesis of MXenes with a specific set of properties, such as the absorption band position, electronic conductivity, and dielectric constant. We demonstrate how to tailor the optical properties of MXene thin films over a broad 1500-nm wavelength range by mixing different ratios of highly conductive Ti 3 C 2 T x with poorly conductive Nb 2 CT x . By changing the MXene film composition, the epsilon-near-zero (ENZ) point, where the optical properties transit from dielectric to metallic, was varied in the spectral range from 1.1 to 2.6 µm. Additionally, we observed a reduction in absorption in some compositions compared to the absorption of the pure MXene films. Compared to other methods, this approach enables simple and continual tuning of MXene optical properties without requiring multiple time-consuming synthesis steps.

2D materials↗
DOE OSTI2022

2nd and 3rd order spectral energy corrections with penumbral de-blurring methodology for opacity platform used on the National Ignition Facility

The Opacity Spectrometer (OpSpec) used in the National Ignition Facility’s opacity experiments measures x-ray spectra from 0.9 to 2.1 keV from the different experimental regions: the backlight source, emission source, and the absorption region with the transmission calculated from these regions. The OpSpec designs have gone through several iterations to help improve the signal-to-noise ratio, remove alternate crystal plane reflections, and improve spectral resolution, which helps to increase the validity of the opacity measurements. However, the source spans well outside the current working spectral range, and higher-order reflections are intrinsic to the crystal, which increases the overall signal seen in the data regions. The recorded data are the convolution of 1st order transmission, higher-order reflections, and the penumbra blurring. In conclusion, this work represents the details for deconvolving the 2nd and 3rd order spectral energy corrections with a penumbral de-blurring to correct the relative measurement of x-ray intensity of different spectral energies and further analysis of datasets relevant to the opacity experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Data associated with the manuscript “Radiative impact of record-breaking wildfires from integrated ground-based data” collected in Richland, Washington in September 2020

This data package is associated with the publication “Radiative impact of record-breaking wildfires from integrated ground-based data” submitted to Nature Scientific Reports (Kassianov et al., 2024). Data from ground-based measurements of shortwave and spectrally resolved irradiance and aerosol optical depth (AOD) in the visible and near-infrared spectral ranges were assessed to quantify the radiative impact of the September 2020 wildfires that occurred in the Western United States. Data were collected in September 2020 by several ground-based instruments at the Atmospheric Measurements Laboratory (AML) located in Richland, Washington (46.3451, -119.2792). These data include (1) Aerosol Optical Depth (AOD); (2) spectrally resolved and shortwave (SW) irradiances; (3) backscatter profiles; (4) total sky images; and (5) near-surface ambient air temperatures.The data package consists of five sub-directories: (1) “AML_Ceilometer_”; (2)” AML_CSPHOT_”; (3) “AML_MFRSR_irradiances_”; (4) “AML_SW_irradiances_and_Temp_”; (5) “AML_TSI_images_”; and 6 files stored at the directory level, including the readme, file-level metadata file, and data dictionary. The file-level metadata file (the file ending in “_flmd.csv”) lists all files contained in this data package and descriptions for each. The data dictionary (the file ending in “_dd.csv”) describes each tabular column header’s unit, definition, and structure. Below are descriptions of each sub-directory:“AML_Ceilometer_” includes ceilometer data collected at the AML. These files contain the corresponding narratives of data. Details related to the ceilometer data can be found in Morris (2016). “AML_CSPHOT_” includes ascii files with high-temporal resolution (about 10-15 min) AML CSPHOT data and their daily-averaged counterparts. These two files contain the corresponding narratives of data. Details related to the CSPHOT data can be found in Gregory (2011). “AML_MFRSR_irradiances_” includes ascii files with the AML MFRSR-measured diffuse, normal, and total spectrally resolved irradiance. Details related to the MFRSR data can be found in Hodges and Michalsky (2016) and Koontz et al. (2013). “AML_SW_irradiances_+_Temp_” includes near-surface ambient air temperature and SW irradiances, namely direct normal, diffuse hemispherical, and total hemispheric (global), measured at the AML. These files also incorporate the corresponding narratives of data. Details related to the SW irradiances can be found in Andreas et al. (2018). “AML_TSI_images_” includes Total Sky Images (TSIs) collected at the AML. Details related to the TSI data can be found in Morris (2005).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Variable magnetic field electron spectrometer to measure hot electrons in the range of 50–460 keV

Resonance absorption (RA) occurs when a p-polarized electromagnetic wave, obliquely incident on an inhomogeneous plasma, tunnels past its turning point and resonantly excites an electron plasma wave (EPW) at the critical density. This phenomenon is important, for instance, in the direct drive approach to inertial fusion energy and is a particular example of a wider phenomenon in plasma physics known as mode conversion, which is crucial for heating magnetic fusion devices, such as tokamaks, via RF heating. Direct measurement of these RA-generated EPW accelerated hot electrons, with energy in the range of a few tens to a few hundreds of keV, is a challenging task due to the relatively low deflecting magnetic fields needed. The solution described here is a magnetic electron spectrometer (MES) with a continually changing magnetic field, lower at the entrance of the MES and gradually increasing toward the end, that enables the measurement of a wide spectral range of electrons with energies between 50 and 460 keV. Electron spectra taken in a LaserNetUS RA experiment were acquired from plasmas generated by irradiating polymer targets with the combination of an ~300 ps pulse followed by a series of ten high intensity 50–200 fs duration laser pulses from the ALEPH laser at Colorado State University. In conclusion, the high intensity beam is designed as spike trains of uneven duration and delay pulses in order to modify the RA phenomenon.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Spectral Dependence of the Photoplastic Effect in CdZnTe and CdZnTeSe

We studied the spectral dependence of the Vickers microhardness HV0.025 of CdZnTe and CdZnTeSe samples upon illumination and found out that it increases over the entire applied spectral range of 1540–750 nm. We also found out that the photoconductivity and microhardness are correlated. We observed changes in the correlation diagram (change of slope and an abrupt change of HV0.025 at several wavelengths of the illuminating light). Based on measurements of the relative changes of the space charge upon illumination using the Pockels effect, we suggest that the observed spectral dependence of positive photoplastic effect in CdZnTe and CdZnTeSe can be explained by the trapping of photoinduced electrons and holes, which affects the motion of the partial dislocations. The underlying physical explanation relies on the assumption that reconstructed bonds break before dislocation glide.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sub-keV design for the National Ignition Facility’s soft x-ray Opacity Spectrometer (OpSpec) and expansion plans for time-resolved measurements

When compared with the National Ignition Facility’s (NIF) original soft x-ray opacity spectrometer, which used a convex cylindrical design, an elliptically shaped design has helped to increase the signal-to-noise ratio and eliminated nearly all reflections from alternate crystal planes. The success of the elliptical geometry in the opacity experiments has driven a new elliptical geometry crystal with a spectral range covering 520–1100 eV. When coupled with the primary elliptical geometry, which spans 1000–2100 eV, the new sub-keV elliptical geometry helps to cover the full iron L-shell and major oxygen transitions important to solar opacity experimentation. The new design has been built and tested by using a Henke x-ray source and shows the desired spectral coverage. Additional plans are underway to expand these opacity measurements into a mode of time-resolved detection, ~1 ns gated, but considerations for the detector size and photometrics mean a crystal geometry redesign. Here, the new low-energy geometry, including preliminary results from the NIF opacity experiments, is presented along with the expansion plans into a time-resolved platform.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

New Dimensions in the Theory of Excited States and X-ray Spectra (Final Report)

This Final Technical Report briefly summarizes the achievements during the lifetime of our DOE BES grant DE-FG02-97ER45623. The long-term goal of this project has been the development of quantitative theories of the interaction between radiation and matter, with a focus on x-ray spectroscopies. X-ray spectra have long been among the most important probes of atomic-scale structure and properties of matter, ranging from atoms and molecular systems to condensed matter and exotic states. These spectroscopies are widely used in investigations at the major DOE synchrotron x-ray facilities and related centers world-wide. In addition to fundamental theory, a major goal of our project has been the development of computational software that implements the theory for calculations of x-ray spectra of various materials throughout the periodic table. Due to the complex nature of x-ray spectra, quantitative theory is essential for its interpretation. The theory is challenging since it involves excited state electronic structure and many-body correlation effects that go beyond independent particle approximations like DFT or Hartree-Fock. Moreover, the experimental investigations typically involve a broad range of energy, time, and temperature scales, from the UV-Vis to hard x-ray energies of order 10 4 eV, and temperatures T from ambient up to the warm-dense-matter regime where the Fermi energy kBTF is of order a few eV, i.e., temperatures of order 105 Kelvin. This broad range of experimental conditions has fostered many novel theoretical approaches and computational techniques, many of which we have developed systematically over the duration of the grant. In contrast to the traditional wave-function approach of quantum theory and electronic structure methods, our theoretical approach is based on modern Green's function techniques. This approach is better suited for aperiodic structures, excited states, and broad spectral ranges, since it avoids the computational bottlenecks of sum-over-states approaches, as in the Fermi golden rule. This theoretical framework has been incorporated into efficient, user-friendly x-ray spectroscopy software which is now used routinely worldwide to simulate and analyze spectra. These theoretical tools provide an essential complement to synchrotron and next-generation light sources, which are used to investigate complex materials with ever increasing precision. Moreover, the synergism between theory, computation and experiment contributed by our research enhances scientific understanding and creates opportunities for innovations in materials and energy science and in many fields. As documented in this Report, this research grant has been remarkably successful in achieving these goals. In particular, this grant has supported the development of the x-ray spectroscopy software suite known as FEFF (named for an effective scattering amplitude f eff in the theory). The FEFF codes have become one of the premier tools for quantitative simulations of x-ray spectra as documented by many thousands of citations in the Web of Science and Google-Scholar.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Electrically Reconfigurable Liquid Metal Nanophotonic Platform for Color Display and Imaging

Dynamically tunable optical materials and device architectures are essential for future photonic technologies, yet conventional solid metals lack the intrinsic tunability required for advanced functionalities. Gallium-based liquid metals (LMs) present an appealing alternative thanks to their distinctive mechanical and optical properties; however, their practical integration in tunable photonic elements remains largely unexplored. Here, in this study, an electrochemically controlled nanophotonic platform is demonstrated that integrates a dynamically reconfigurable LM ground plane with gold nanoantenna arrays within a microfluidic system, enabling precise and reversible modulation of optical resonances across the visible to mid-infrared spectral ranges. By employing moderate operational voltages (1.5–3.0 V), real-time tuning of high-resolution structural color patterns is achieved through nanoscale control of the interfacial gap between the LM and Au nanoantennas. This innovative platform facilitates electrically programmable, high-contrast color patterns suitable for dynamic optical displays, secure anti-counterfeiting labels, and imaging applications. Additionally, this platform enables tunable mid-infrared spectral responses, which may be utilized for chemical and biological sensing applications. This versatile integrated LM-based nanophotonic platform opens new paths toward multifunctional, actively tunable/reconfigurable photonic device and system technologies.

Imaging↗
DOE OSTI2024

Multicode benchmark on simulated Ti K-edge x-ray absorption spectra of Ti-O compounds

X-ray absorption spectroscopy (XAS) is an element-specific materials characterization technique that is sensitive to structural and electronic properties. First-principles simulated XAS has been widely used as a powerful tool to interpret experimental spectra and draw physical insights. Recently, there has also been growing interest in building computational XAS databases to enable data analytics and machine learning applications. However, there are non-trivial differences among commonly used XAS simulation codes, both in underlying theoretical formalism and in technical implementation. Reliable and reproducible computational XAS databases require systematic benchmark studies. In this work, we benchmarked Ti K-edge XAS simulations of ten representative Ti-O binary compounds, which we refer to as the Ti-O-10 dataset, using three state-of-the-art codes: XSPECTRA, OCEAN and exciting. We systematically studied the convergence behavior with respect to the input parameters and developed a workflow to automate and standardize the calculations to ensure converged spectra. Our benchmark comparison considers a 35 eV spectral range starting from the K-edge onset, representative of widely used near-edge spectra. Quantitative comparison over this range is based on Spearman’s rank correlation score (r sp ). Our results show: (1) the two Bethe-Salpeter equation (BSE) codes (OCEAN and exciting) have excellent agreement with an average $r$ $sp$ of 0.998; (2) good agreement is obtained between the core-hole potential code (XSPECTRA) and BSE codes (OCEAN and exciting) with an average $r$ $sp$ of 0.990, and this smaller $r$ $sp$ reflects the noticeable differences in the main edge spectral shape that can be primarily attributed to the difference in the strength of the screened core-hole potential; (3) simulations from both methods overall reproduce well the main experimental spectral features of rutile and anatase, and the different treatments of the screened core-hole potential have visible impact on pre-edge intensities and the peak ratio of the main edge; (4) there exist moderate differences in the relative edge alignment of the three codes with a standard deviation of about 0.2 eV, which arise from multiple contributions including the frozen core approximation, final state effects, and different approximations used for the self-energy correction. In conclusion, our benchmark study provides important standards for first-principles XAS simulations with broad impact in data-driven XAS analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Non-destructive measurement and real-time monitoring of apple hardness during ultrasonic contact drying via portable NIR spectroscopy and machine learning

Portable near-infrared spectrometer in the spectral range of 900–1700 nm was evaluated for the first time to assess and monitor apple hardness in real-time during ultrasonic drying. Calibration models were developed using PLS and ANN, and their performances were evaluated by internal leave-one-out cross-validation and an external dataset. Several pre-treatments including standard normal variate (SNV), multiplicative scatter correction (MSC), Savitzky–Golay first and second derivatives were employed to examine the effects of spectral variations in hardness prediction. Seven important wavelengths were selected using weighted regression coefficients to develop a simple MLR model to facilitate the model interpretation and circumvent noise. The models using PLS, MLR, and ANN with selected wavelengths predicted the apple hardness with R 2 p of 0.91, 0.91, 0.95, and RMSEP of 14.78, 14.85, and 12.46 N, respectively. Finally, the results indicate that portable NIR spectrometers are quite promising for real-time monitoring of apple hardness during ultrasonic drying.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Combining Spectroscopic Techniques to Determine the Optical Constants of Powdered Lactose

A method for deriving the optical constants (n/k) of organic powdered materials using pressed pellets in the mid-infrared spectral range is introduced that combines variable angle spectroscopic ellipsometry and transmission spectroscopy. The approach is applied to lactose, in which three different forms of pellets were pressed and measured: A pure lactose pellet and a mixed lactose/KBr pellet with a large analyte percentage were used for ellipsometric measurements, and a KBr transmission pellet with only a small analyte percentage were used for transmission measurements. The transmission data provide an initial set of oscillators and improve the spectral fitting of weak absorption features (k<0.01). Ellipsometric data for the pure and mixed pellets are then fit simultaneously to derive the final n/k values for lactose from 6000-400 cm-1. An alternative method just using the ellipsometric data from the mixed pellet and the transmission data is also presented and shows good agreement with the multi-sample analysis, providing a simpler method for powders that do not press easily into pure pellets. Finally, the derived optical constants are used to model the reflectance data, demonstrating a good match with the measured reflectance spectra if non-idealities are included.

Yokosuk, Michael O.↗
DOE OSTI2025

Identifying and classifying localized states in gapless systems using pseudospectral methods

For decades, band theory has been used to understand the physical properties of crystals by leveraging these systems’ translational symmetries to determine the spectral range and distribution of their Bloch eigenstates. However, many important phenomena only manifest at a crystal’s defects or boundaries where this translational symmetry is broken, such as defect-localized states that appear at color centers, or boundary-localized states whose existence is guaranteed by topology. Although it is possible to extend band theoretic approaches to study these classes of states, these extensions are only applicable in gapped systems, where any localized states are spectrally isolated from the crystal’s bulk states.

97 MATHEMATICS AND COMPUTING↗