Search NASA⌕ Search

SEARCH · Search NASA

Results for “spherical maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Gravity and magnetic anomaly data analysis

Progress on the analysis MAGSAT data is reported. The MAGSAT data from 40 deg S to 70 deg N latitude and 30 deg W to 60 E longitude was reduced to radial polarization. In addition, gravity anomaly data from this area were processed and a variety of filtered maps were prepared for combined interpretation of the gravity and magnetic data in conjunction with structural and tectonic maps of the area. The VERSATEC listings and cross-reference maps of variable and array names for the spherical Earth analysis programs NVERTSM, SMFLD, NVERTG, and GFLD were also prepared.

Braile, L. W.↗

A full simulation of a vortex ring

A three-dimensional spectral method is developed for the solution to the incompressible Navier-Stokes equations in an unbounded domain. The spectral method relies on divergence-free basis functions as proposed by Leonard (1981). The basis functions are formed using vector spherical harmonics and Jacobi polynomials together with a mapping in the radial direction. An axisymmetric code was written and is verified using an exact solution of the Stokes equations. Preliminary results for the evolution of a vortex ring according to the Navier-Stokes equations are presented.

Stanaway, S. K.↗

Venus gravity and topography: 60th degree and order model

We have combined the most recent Pioneer Venus Orbiter (PVO) and Magellan (MGN) data with the earlier 1978-1982 PVO data set to obtain a new 60th degree and order spherical harmonic gravity model and a 120th degree and order spherical harmonic topography model. Free-air gravity maps are shown over regions where the most marked improvement has been obtained (Ishtar-Terra, Alpha, Bell and Artemis). Gravity versus topography relationships are presented as correlations per degree and axes orientation.

Konopliv, A. S.↗

FAST Drift Scan Survey for Ηι Intensity Mapping: I. Preliminary Data Analysis

This work presents the initial results of the drift-scan observation for the neutral hydrogen (Hi) intensity mapping survey with the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The data analyzed in this work were collected in night observations from 2019 through 2021. The primary findings are based on 28 hr of drift-scan observation carried out over 7 nights in 2021, which covers 60 deg 2 sky area. Our main findings are, first, our calibration strategy can successfully correct both the temporal and bandpass gain variation over the 4 hr drift-scan observation. Second, the continuum maps of the surveyed region are made with frequency resolution of 28 kHz and pixel area of $_{2.95\,{\mathrm{arcmin}}^{2}}$. The pixel noise levels of the continuum maps are slightly higher than the forecast assuming $T$ sys = 20 K, which are 36.0 mK (for 10.0 s integration time) at the 1050–1150 MHz band, and 25.9 mK (for 16.7 s integration time) at the 1323–1450 MHz band, respectively. Third, the flux-weighted differential number count is consistent with the NRAO-VLA Sky Survey (NVSS) catalog down to the confusion limit ~7 mJy beam –1 . Finally, the continuum flux measurements of the sources are consistent with those found in the literature. The difference in the flux measurement of 81 isolated NVSS sources is about 6.3%. Our research offers a systematic analysis for the FAST Hi intensity mapping drift-scan survey and serves as a helpful resource for further cosmology and associated galaxies sciences with the FAST drift-scan survey.

79 ASTRONOMY AND ASTROPHYSICS↗

Mapping experiment with space station

Mapping of the Earth from space stations can be approached in two areas. One is to collect gravity data for defining topographic datum using Earth's gravity field in terms of spherical harmonics. The other is to search and explore techniques of mapping topography using either optical or radar images with or without reference to ground central points. Without ground control points, an integrated camera system can be designed. With ground control points, the position of the space station (camera station) can be precisely determined at any instant. Therefore, terrestrial topography can be precisely mapped either by conventional photogrammetric methods or by current digital technology of image correlation. For the mapping experiment, it is proposed to establish four ground points either in North America or Africa (including the Sahara desert). If this experiment should be successfully accomplished, it may also be applied to the defense charting systems.

Wu, S. S. C.↗

Dependence of DOLP on Coronal Electron Temperature, Speed, and Structure

The degree of linear polarization (DOLP) is an important measure of the fraction of the total K-coronal brightness due to Thomson scattering of photospheric brightness off the coronal electrons that is linearly polarized. However, the corona is also brightened by the F-coronal brightness due to scattering of photospheric brightness off everything else in the corona except the electrons, which remains totally unpolarized at least up to a coronal height of 5 R. As a result, to measure the DOLP, the F- and K-coronal brightness need to be separated by taking three consecutive images by turning a linear polarizer through three well-defined angles or with a single image using a polarization camera. In this regard, the theoretically computed DOLP would be a helpful tool to compare with the experimentally measured DOLP on the real corona in order to estimate how well the F-coronal brightness is removed from the total coronal brightness to isolate the K-coronal brightness. This is important because the K-coronal brightness ratios at (410.3 nm/390.0 nm) and (423.3 nm/398.7 nm) can be used to generate maps of electron temperature and speed, respectively, and the individual K-coronal brightness at all four wavelengths can be used independently to generate maps of the electron density in the corona. In this article, for a spherically symmetric model (SSM) corona with assumed temperatures of 1.0 MK and 2.0 MK and radial flow speeds of 0.0 km/s and 250.0 km/ s for the coronal electrons, we have computed the wavelength-dependent DOLP from 370.0 nm to 470.0 nm in intervals of 1.0 nm, and for a spherically asymmetric model (SAM) corona containing a simulation of the Bastille Day coronal mass ejection, streamers, and quiet areas, we have generated maps of DOLP at the four wavelengths 390.0, 398.7, 410.3, and 423.3 nm. Finally, we have used these theoretically computed models of DOLP to compare with the experimentally measured DOLP.

Reginald, Nelson↗

Inversion of Magnetic Measurements of the CHAMP Satellite Over the Pannonian Basin

The Pannonian Basin is a deep intra-continental basin that formed as part of the Alpine orogeny. In order to study the nature of the crustal basement we used the long-wavelength magnetic anomalies acquired by the CHAMP satellite. The anomalies were distributed in a spherical shell, some 107,927 data recorded between January 1 and December 31 of 2008. They covered the Pannonian Basin and its vicinity. These anomaly data were interpolated into a spherical grid of 0.5 x 0.5, at the elevation of 324 km by the Gaussian weight function. The vertical gradient of these total magnetic anomalies was also computed and mapped to the surface of a sphere at 324 km elevation. The former spherical anomaly data at 425 km altitude were downward continued to 324 km. To interpret these data at the elevation of 324 km we used an inversion method. A polygonal prism forward model was used for the inversion. The minimum problem was solved numerically by the Simplex and Simulated annealing methods; a L2 norm in the case of Gaussian distribution parameters and a L1 norm was used in the case of Laplace distribution parameters. We INTERPRET THAT the magnetic anomaly WAS produced by several sources and the effect of the sable magnetization of the exsolution of hemo-ilmenite minerals in the upper crustal metamorphic rocks.

Kis, K. I.↗

Active motion of multiphase oil droplets: emergent dynamics of squirmers with evolving internal structure

Synthetic soft matter systems, when driven beyond equilibrium by active processes, offer the potential to achieve dynamical states and functions of a complexity found in living matter. Emulsions offer the basis of a simple yet versatile system for identification of the physicochemical principles underlying active soft matter, but how multiple internal phases within emulsion droplets (e.g., Janus morphologies) organize to impact emergent dynamics is not understood. Here, we create multiphase oil droplets with ultralow interfacial tensions but distinct viscosities, and drive them into motion in aqueous micellar solutions. Preferential solubilization of select components of the oil both drives the droplet motion and yields a progression of internal phase morphological states with distinct symmetries. In this work, we find the active droplets to exhibit five dynamical states during morphogenesis. By quantifying microscopic flow fields, we show that it is possible to map the diverse droplet behaviors to squirmer models of spherical microswimmers in Stokes flow, thus showing that multiphase droplets offer the basis of a versatile platform with which to study and engineer the hydrodynamics of microswimmers.

36 MATERIALS SCIENCE↗

Variations of three-dimensional anisotropy of cosmic rays during Forbush decreases.

Variations of three-dimensional anisotropy of cosmic rays during Forbush decreases are examined by a spherical harmonic method and by constructing successive isointensity contour maps in the solar ecliptic coordinate system. The east-west and north-south anisotropies are studied statistically and for several individual events; the data are based on cosmic ray records from about 24 stations for the 3-year period from 1966 to 1968. For the individual events, the high anisotropies of about 4% are examined in terms of the convective, diffusive and density gradient components of the differential streaming as well as the interplanetary magnetic field and solar wind. In each case, vector gradients are derived that lead to the observed anisotropies, and the magnitude of these gradients is typically 10-20 times that of the quiet time interplanetary gradient.

Yoshida, S.↗

Mesogranulation as A Distinct Scale of Convection in the Sun

We present evidence for the existence of mesogranulation as a scale of convection distinct from granulation and supergranulation through analysis of full-disk Doppler velocity images of the Sun collected by the Michelson Doppler Imager (MDI) aboard the NASA/ESA Solar and Heliospheric Observatory (SOHO). Our analysis procedures isolate nearly steady flows in the solar photosphere and yield power spectra of convection for spherical harmonic degrees up to I = 1000. Each spectrum exhibits an obvious supergranulation peak at I approximately 130 and a broad secondary peak at I approximately 600 with a distinct break in the spectrum between these peaks at I approximately 300. We believe that this secondary peak is a signature of mesogranulation with typical cell diameters of about 7 Mm. Our standard analysis procedure is to first remove the p-mode oscillation signal by averaging individual Dopplergrams over 17-minute intervals. Next, by fitting to standard functional forms we remove Doppler signals due to the motion of the spacecraft, the convective blueshift, solar rotation including differential rotation, and the meridional circulation in order to produce Dopplergrams dominated by convective motions. By mapping these processed images onto heliographic coordinates and projecting onto spherical harmonics, we produce a power spectrum of solar convection for each 17-minute period. We construct synthetic images and pass them through the same analysis procedure in order to determine the actual solar convection spectrum that reproduces the analyzed results. We find that a small but increasing percentage of high-degree convective power is lost in the analysis as we approach the limit of resolution of the detector but'that the broad, mesogranulation peak at I approximately 600 must be included in the convection spectrum of the synthetic images.

Bachmann, Kurt T.↗

Lunar Prospector Orbit Determination Results

The orbit support for Lunar Prospector (LP) consists of three main areas: (1) cislunar orbit determination, (2) rapid maneuver assessment using Doppler residuals, and (3) routine mapping orbit determination. The cislunar phase consisted of two trajectory correction maneuvers during the translunar cruise followed by three lunar orbit insertion burns. This paper will detail the cislunar orbit determination accuracy and the real-time assessment of the cislunar trajectory correction and lunar orbit insertion maneuvers. The non-spherical gravity model of the Moon is the primary influence on the mapping orbit determination accuracy. During the first two months of the mission, the GLGM-2 lunar potential model was used. After one month in the mapping orbit, a new potential model was developed that incorporated LP Doppler data. This paper will compare and contrast the mapping orbit determination accuracy using these two models. LP orbit support also includes a new enhancement - a web page to disseminate all definitive and predictive trajectory and mission planning information. The web site provides definitive mapping orbit ephemerides including moon latitude and longitude, and four week predictive products including: ephemeris, moon latitude/longitude, earth shadow, moon shadow, and ground station view periods. This paper will discuss the specifics of this web site.

Beckman, Mark↗

The line integral approach to radarclinometry

Advances over previous work in radarclinometry (Wildey, 1984 and 1986) are proposed, including incorporation of a more exact treatment of the dependence on terrain orientation of the solid angle of integration of the microwave specific energy comprising individual pixel power, and the integration of the theory in the cross-ground-range direction. The local curvature hypothesis, making possible formulation of the theory in terms of a line integral, is expanded to include the possibilities of local cylindricity, local biaxial ellipsoidal hyperbolicity, and least-squares local sphericity. It is suggested that the banding noted in topographic maps which are produced on the basis of variation in the proportioning between curvature assumptions may be due to the lack of radiometric calibration.

Wildey, Robert L.↗

HST PSF simulation using Tiny Tim

Tiny Tim is a program which simulates Hubble Space Telescope imaging camera PSF's. It is portable (written and distributed in C) and is reasonably fast. It can model the WFPC, WFPC 2, FOC, and COSTAR corrected FOC cameras. In addition to aberrations such as defocus and spherical, it also includes WFPC obscuration shifting, mirror zonal error maps, and jitter. The program has been used at a number of sites for deconvolving HST images. Tiny Tim is available via anonymous ftp on stsci.edu in the directory software/tinytim.

Krist, J. E.↗

3D Shape Reconstruction of Small Bodies from Sparse Features

The autonomous approach of spacecraft to a small body (comet or asteroid) relies on using all available information at each phase of the approach. This paper presents new algorithms for global shape reconstructions from sparse tracked surface points. These methods leverage estimates from earlier phases, such as rotation pole, as well as a priori knowledge, such as a genus-0 body (i.e. without boundaries or topological holes). A mapping algorithm is proposed, which performs faithful reconstructions while enforcing genus-0 output through spherical parameterization. To estimate the shape of permanently shadowed regions of the body, a symmetry reconstruction method is added to the reconstruction algorithms. This method is shown to substantially increase the reconstruction accuracy but is subject to the symmetry of the body perpendicular to the rotation pole. The proposed mapping algorithm is compared to stateof- the-practice surface reconstruction algorithms, assessing their accuracy and ability to correctly generate genus-0 shape models for 2400 datasets and three small bodies. The proposed spherical parameterization algorithm performed consistently with the state-of-the-practice while being the only algorithm to always produce genus-0 shape models.

Nesnas, Issa↗

The Lunar Crustal Thickness from Analysis of the Lunar Prospector Gravity and Clementine Topography Datasets

The Lunar Prospector spacecraft has mapped the gravity field of the Moon to a level of resolution never achieved before, and a spherical harmonic representation to degree and order 100 is available. When combined with the topography dataset produced by the Clementine mission, the resulting Bouguer anomaly map is interpreted to model the thickness of the lunar crust. Such models are crucial to understanding the lunar thermal history and the formation of geological features such as mascon basins, several more of which have been newly discovered from this dataset. A two-layer planetary model was used to compute the variations of the depth to the lunar Moho. The thickness values ranged from near 0 to 120 km. There is significant agreement with previous work using the Clementine gravitational field data with differences in specific locations such as South Pole-Aitken Basin, for example.

Asmar, S.↗

Mariner 9 aerographic coordinate system

Preliminary Mariner 9 map products were based on computed aerocentric coordinates at the point where the optic path intercepts a spherical reference figure for Mars. The intercept point on a reference ellipsoid would in general have slightly different values of radius, latitude, and longitude. For near-vertical viewing used for mapping, these differences are on the order of 0.1 in latitude and longitude, which is negligible compared to the uncertainties of the initial uncontrolled mosaics and maps.

Devaucouleurs, G.↗

Nanoscale morphological evolution of monocrystalline Pt surfaces during cathodic corrosion

This paper studies the cathodic corrosion of a spherical single crystal of platinum in an aqueous alkaline electrolyte, to map out the detailed facet dependence of the corrosion structures forming during this still largely unexplored electrochemical phenomenon. We find that anisotropic corrosion of the platinum electrode takes place in different stages. Initially, corrosion etch pits are formed, which reflect the local symmetry of the surface: square pits on (100) facets, triangular pits on (111) facets, and rectangular pits on (110) facets. We hypothesize that these etch pits are formed through a ternary metal hydride corrosion intermediate. In contrast to anodic corrosion, the (111) facet corrodes the fastest, and the (110) facet corrodes the slowest. For cathodic corrosion on the (100) facet and on higher-index surfaces close to the (100) plane, the etch pit destabilizes in a second growth stage, by etching faster in the (111) direction, leading to arms in the etch pit, yielding a concave octagon-shaped pit. In a third growth stage, these arms develop side arms, leading to a structure that strongly resembles a self-similar diffusion-limited growth pattern, with strongly preferred growth directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Outer atmospheric research

The region above the earth from about 90 km to 150 km is a major part of the upper or outer atmosphere. It is relatively unexplored, being too high for balloons or aircraft and too low for persistent orbiting spacecraft. However, the concept of a tethered subsatellite, deployed downward from an orbiting, more massive craft such as the Space Shuttle, opens the possibility of a research capability that could provide global mapping of this region. The need for research in this thick spherical shell above the earth falls into two major categories: (1) scientific data for understanding and modeling the global atmosphere and thereby determining its role in the earth system, and (2) engineering data for the design of future aerospace vehicles that will operate there. This paper presents an overview and synthesis of the currently perceived research needs and the state-of-the-art of the proposed tethered research capability.

Anderson, John L.↗