Search NASA⌕ Search

SEARCH · Search NASA

Results for “strahl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The convergence of theory and experiment in direct combustion generated noise

Current theories of combustion generated noise are reviewed with regard to their ability to predict the sound power output and spectral characteristics of noise generated by several flame types. New experimental information on open turbulent flames and on gas turbine combustor cans is presented. Available information on gas phase diffusion flames is reviewed. It is concluded that if some of the gross turbulence features of the flame are known and if the acoustical behavior of any flame enclosure is known, then scaling rules for behavior of the sound power output and spectral content may be quite accurately produced by theory. On the other hand, the theory is not sufficiently advanced to make absolute predictions; such predictions must await more detailed knowledge of turbulent flame structure.

Strahle, W. C.↗
NASA NTRS1975

Combustion generated noise in gas turbine combustors

Experiments are conducted for the noise power and spectra emitted from a gas turbine combustor can exhausting to the atmosphere. The theory of combustion noise is applied to the results to determine the noise generating capability of the flame in the absence of reflecting can surfaces. The results show that for a fixed fuel (JP-4) the noise output is independent of fuel/air ratio for well stabilized can-type flames and heavily dependent on airflow while the spectra are dominated by the can acoustics, primarily through sound absorption by the liner. In an installed configuration the noise output depends heavily on the enclosure acoustics. Scaling rules are presented for installed configurations.

Strahle, W. C.↗
NASA NTRS1974

Combustion generated noise in gas turbine combustors

Experiments were conducted to determine the noise power and spectra emitted from a gas turbine combustor can exhausting to the atmosphere. Limited hot wire measurements were made of the cold flow turbulence level and spectra within the can. The fuels used were JP-4, acetone and methyl alcohol burning with air at atmospheric pressure. The experimental results show that for a fixed fuel the noise output is dominated by the airflow rate and not the fuel/air ratio. The spectra are dominated by the spectra of the cold flow turbulence spectra which were invariant with airflow rate in the experiments. The effect of fuel type on the noise power output was primarily through the heat of combustion and not the reactivity. A theory of combustion noise based upon the flame radiating to open surroundings is able to reasonably explain the observed results. A thermoacoustic efficiency for noise radiation as high as .00003 was observed in this program for JP-4 fuel. Scaling rules are presented for installed configurations.

Strahle, W. C.↗
NASA NTRS1976

A new method for solving problems of sound radiation from a duct for the case of low Mach number

A method for rapidly solving duct end-plane impedance problems is presented which is based on deriving a form of the Helmholtz integral formula expressing the normal derivative of the acoustic pressure at a boundary point. A set of integral expressions is obtained by satisfying the existing boundary conditions and then solved using a general collocation method. The results obtained for the Levine-Schwinger (1948) problem agree well with the exact values. In the case of a duct flow having a temperature mismatch with the surroundings, the results show an increase in the magnitude of the reflection coefficient for the case of a cold core, and a decrease in its value for the case of a hot core, as compared with the case of exhaust into a uniform medium. A phase change of between pi/2 and pi is nearly always achieved, which indicates the tendency towards maintaining a constant pressure at the exit plane. The method can easily be extended to arbitrary duct shapes as long as they are axisymmetric.

Wahbah, M. M.↗
NASA NTRS1976

Noise produced by fluid inhomogeneities

In an actual engine system, one mechanism for production of hot spots is the burning of various fluid elements at various different mixture ratios. Variable mixture ratio means variable temperature, and this is the effect that has been studied insofar as a noise source is concerned. However, variable mixture ratio also implies variable molecular weight and heat capacity. The paper investigates whether either of these last two variations may be responsible for a significant noise source. The analysis is made within the context of one-dimensional unsteady flow as in the work of Candel (1972). A mixture of thermally perfect gases is assumed as the working fluid, and the fluid composition consists of species 1 and a small and variable mole fraction of species 2 which has different molecular weight and specific heats as compared with species 1. In the absence of changes in the ratio of specific heat (gamma), the entropy variations due to temperature and molecular weight variations are equivalent as a sound source. The portion of sound called 'gamma prime' noise is discussed.

Strahle, W. C.↗
NASA NTRS1977

An investigation of combustion and entropy noise

The relative importance of entropy and direct combustion noise in turbopropulsion systems and the parameters upon which these noise sources depend were studied. Theory and experiment were employed to determine that at least with the apparatus used here, entropy noise can dominate combustion noise if there is a sufficient pressure gradient terminating the combustor. Measurements included combustor interior fluctuating pressure, near and far field fluctuating pressure, and combustor exit plane fluctuating temperatures, as well as mean pressures and temperatures. Analysis techniques included spectral, cross-correlation, cross power spectra, and ordinary and partial coherence analysis. Also conducted were combustor liner modification experiments to investigate the origin of the frequency content of combustion noise. Techniques were developed to extract nonpropagational pseudo-sound and the heat release fluctuation spectra from the data.

Strahle, W. C.↗
NASA NTRS1976

Thermocouple time constant measurement by cross power spectra

A method of measuring thermocouple time constants is outlined which requires Fourier signal processing. In this method, two thermocouples of differing time constants are placed in a gas flow as closely as possible to one another, and the time constant of the first thermocouple is determined directly from the extremum of the imaginary part of the ratio of the ensemble averaged cross-power spectrum to the ensemble averaged auto-power spectrum of that thermocouple. A coherence function is given for assuring the quality of the data, and results are presented for an experimental test of the method. Some problems with the method are briefly noted.

Strahle, W. C.↗
NASA NTRS1977

Coherence between internal and external noise generated by gas turbine combustors

Experiments and analysis on a gas turbine combustor unit are reported with a view in mind to separate propagated acoustic power from non-propagating 'pseudo-sound'. Analytically, it is suggested that a transition frequency will exist below which the interior pressure fluctuations are non-propagating, whereas above this frequency, of the order of 100 Hz, the noise is dominated by propagating acoustic waves. Coherence measurements are reported which show this concept to be borne out experimentally. Coherence between interior and exterior microphones is measured over a wide range of experimental conditions for a gas turbine combustor exhausting directly to the atmosphere. The purpose is to show that below a certain frequency, measurements of interior noise are not indicative of combustion noise ultimately propagating from an engine.

Strahle, W. C.↗
NASA NTRS1977

Experimental and analytical separation of hydrodynamic, entropy and combustion noise in a gas turbine combustor

This paper deals with noise sources which are central to the problem of core engine noise in turbopropulsion systems. The sources dealt with are entropy noise and direct combustion noise, as well as a non-propagating psuedosound which is hydrodynamic noise. It is shown analytically and experimentally that a transition can occur from a combustion noise dominant situation to an entropy noise dominant case if the contraction of a terminating nozzle to the combustor is high enough. In the combustor tested, entropy noise is the dominant source for propagational noise if the combustor is choked at the exit. Analysis techniques include spectral, cross spectral, cross correlation, and ordinary and partial coherence analysis. Measurements include exterior and interior fluctuating and mean pressures and temperatures.

Muthukrishnan, M.↗
NASA NTRS1977

Combustion noise

A review of the subject of combustion generated noise is presented. Combustion noise is an important noise source in industrial furnaces and process heaters, turbopropulsion and gas turbine systems, flaring operations, Diesel engines, and rocket engines. The state-of-the-art in combustion noise importance, understanding, prediction and scaling is presented for these systems. The fundamentals and available theories of combustion noise are given. Controversies in the field are discussed and recommendations for future research are made.

Strahle, W. C.↗
NASA NTRS1980

Interaction of oscillations of channel flow and flow separation at duct discontinuities

A two dimensional experiment was used to study the flow fluctuations in the separated region resulting from a wall slot step (convergent step). This geometry corresponds to the geometry present in a segmented solid rocket motor in the region of the ends of adjoining segments. A modulated tunnel flow of controlled oscillation frequency was used, and the effect on flow fluctuations in the separated region was examined by hot wire velocity measurements. The transfer function between free stream oscillations and separated flow fluctuations at the driven frequency was determined over a range of frequencies and main stream flow velocities. The transfer function exhibited a frequency dependence with maximum in the 10 - 25 Hz range, with the maximum occurring at higher frequency when the mean flow velocity was higher.

Price, E. W.↗
NASA NTRS2018

A Systems Architecting Methodology Using Bloom’s Taxonomy to Promote Creative Engineering Synthesis

Architecting complex systems requires high-level cognitive processing and extensive knowledge of the system elements, functions, relationships, and constraints. This paper describes a systems architecting methodology implemented through cognitive psychological creative processes using Bloom’s taxonomy as a framework to generate the expert knowledge required to effectively and systematically synthesize new systems. Systems architecting activities were carried out to identify, develop, and capture factual and conceptual knowledge relevant to the system subject matter and functional elements, as well as to facilitate active processing of the knowledge through remembering, understanding, applying, analyzing, evaluating, and creating. Dual channel and limited capacity principles of learning were incorporated into the format of the systems engineering tools developed to assist with information processing and retention. Meta-cognitive strategies associated with memory and creative idea generation were implemented into the methodology to effectively and efficiently develop system alternatives using the full collection of knowledge. Synthesis of an orbiting sample capture and orientation system architecture to enable spacecraft-based on orbit capture of a Mars sample container for a potential Mars Sample Return campaign was used as a case study.

Adajian, Rama↗
NASA NTRS2018

An Orbiting Sample Capture and Orientation System Architecture for Potential Mars Sample Return

An orbiting sample capture and orientation system architecture for a Rendezvous and Orbiting Sample Capture System (ROCS) concept was developed to enable spacecraft based, in-orbit capture, orientation, and transfer of a Mars sample container into a containment vessel as part of a potential Mars Sample Return (MSR) campaign. An analysis of the system functions, requirements, interactions, and constraints was performed. A trade study was carried out on relevant technologies, and a set of evaluation criteria was developed to help determine the most feasible concepts for implementation. The Mars Capture and Re-orientation for the potential Next Mars Orbiter (MACARONE) concept is proposed as a promising system architecture for the ROCS Capture and Orient Module (COM). The concept uses a sliding trap door for Orbiting Sample (OS) capture, a Motorized Cups Mechanism for OS orientation, and a 2 DOF Turret Arm with a paddle for transferring the OS into a containment vessel. This approach facilitates modularity, development flexibility, test-ability in a 1G environment, analyze-ability without the need to simulate or test for 0G contact dynamics, ability to encapsulate potential dust surrounding the OS, and ability to be ejected to reduce the probability of Earth exposure to non-sterilized Mars material.

Lalla, Karan↗
NASA NTRS2020

Concept for an On-orbit Capture and Orientation Module for Potential Mars Sample Return

An orbiting sample Capture and Orient Module (COM) architecture for a Capture, Contain, and Return System (CCRS) payload concept for an Earth Return Orbiter (ERO) was developed to enable on-orbit capture, orientation, and transfer of a Mars sample container into a containment vessel for potential Mars Sample Return (MSR). The module is composed of a capture mechanism for containing the Orbiting Sample (OS), a capture cone to capture and contain the OS, an orientation mechanism to orient the OS, an External Transfer Mechanism (ETM) to cage the OS during capture and assemble it into the containment vessel, a capture trigger to trigger capture mechanism and ETM closure during OS capture, and a sensing system to inspect the OS and confirm capture and orientation. Statistical modeling and simulations of the OS during capture were performed to analyze the time to contact and perturbations to the spacecraft at first contact. A half-scale functional prototype of the module was developed to demonstrate end-to-end operation.

Younse, Paulo↗
NASA NTRS2020

Robotics System Process and Concept for On-orbit Assembly for Potential Mars Sample Return

Proposed Mars Sample Return (MSR) missions would require on-orbit assembly of containment vessels to meet backward Planetary Protection requirements and transfer of the sample container through various stations and positions. Some operations would have to be performed autonomously, and others would require ground-in-loop decision-making stages and verification processes. One concept design for an Earth Return Orbiter (ERO) Capture, Contain, and Return System (CCRS) Transfer Mechanism (TM) is a multi-Degree of Freedom (DOF) manipulator that utilizes a passive End Effector (EE) to assist in containment vessel assembly. To converge on a feasible design, a robotic system process has been instantiated. This process is composed of three main phases: robotic problem definition (operating environment, operations/functions, system goals), robotic solution selection (trade studies on the number of degrees of freedom, number of mechanisms, types of mechanisms), robotic solution design, implementation, and verification and validation (kinematic configuration, robotic and kinematic analysis and topology optimization of components). As a final product of this process, a half-scale functional prototype of the TM was developed to demonstrate the end-to-end operation capability.

Strahle, Jackson W↗