Search NASA⌕ Search

SEARCH · Search NASA

Results for “strains effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Rationalization of promoted reverse water gas shift reaction by Pt 3 Ni alloy: Essential contribution from ensemble effect

Bimetallic alloys have attracted considerable attention due to the tunable catalytic activity and selectivity that can be different from those of pure metals. Here, we study the superior catalytic behaviors of the Pt 3 Ni nanowire (NW) over each individual, Pt and Ni NWs during the reverse Water Gas Shift (rWGS) reaction, using density functional theory. The results show that the promoted rWGS activity by Pt3Ni strongly depends on the ensemble effect (a particular arrangement of active sites introduced by alloying), while the contributions from ligand and strain effects, which are of great importance in electrocatalysis, are rather subtle. As a result, a unique Ni–Pt hybrid ensemble is observed at the 110/111 edge of the Pt 3 Ni NW, where the synergy between Ni and Pt sites is active enough to stabilize carbon dioxide on the surface readily for the rWGS reaction but moderate enough to allow for the facile removal of carbon monoxide and hydrogenation of hydroxyl species. Furthermore, our study highlights the importance of the ensemble effect in heterogeneous catalysis of metal alloys, enabling selective binding–tuning and promotion of catalytic activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Factors Affecting the Electron Conductivity in Single Crystal Li 7 La 3 Zr 2 O 12 and Li 7 P 3 S 11

One of the serious challenges in all solid-state Li ion batteries is neutral Li intrusion into the solid-state electrolyte that can ultimately cause catastrophic failure. One possibility for this is due to n-type electron conductivity that induces the reaction Li + + e – → Li 0 at sites where the potential is less than the Li + /Li potential. This paper reports hybrid density functional theory calculations of the electronic conductivity in two prototype single crystalline solid-state electrolytes, cubic Li 7 La 3 Zr 2 O 12 (c-LLZO) and Li 7 P 3 S 11 (LPS). The formation energies of important point defects that can affect electron conductivity are determined, and we find that the mechanism of n-type electron conductivity for both solid-state electrolytes is via “small” electron polaron hopping, where the quotes signify that substantial Li ion rearrangement is associated with the polaron formation and its migration. In both electrolytes, the formation energies for the small polarons at the Fermi energy are too high to generate measurable electron conductivity at room temperature. For c-LLZO, the concentration of electron polarons necessary to ensure charge neutrality from positively charged oxygen vacancies formed in synthesis can be significantly higher. Hence, the electron conductivity could be significant when measured with ion-blocking metal electrodes, and we discuss how the synthesis conditions could affect this magnitude. However, in the solid-state battery, these polarons are replaced by negatively charged Li vacancies so that the electron conductivity should remain minimal. For LPS single crystals, the inherent minimal electron conductivity is independent of synthesis conditions. Here we also show that the cost of forming Li 0 in bulk c-LLZO is enormous due to strain effects so that it could only potentially form at voids, grain boundaries, or around vacancy defects which relax the lattice strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Probing and Tuning Strain‐Localized Exciton Emission in 2D Material Bubbles at Room Temperature

In monolayer transition metal dichalcogenides bubbles-nanoscale deformations typically exhibiting a dome-like shape-Excitons are confined by the strain effect, which exhibits extraordinary emission properties, such as single photon generation, enhanced light emission, and spectrally tunable excitonic states. While the strain profiles of these bubbles are extensively studied, this work provides an approach 1) to directly visualize the associated exciton properties in bubbles formed in WSe2 monolayer, revealing an intrinsic emission wavelength shift of ≈40 nm, and 2) actively modify local strain, enabling further exciton emission tuning over a range of 50 nm. These are achieved by emission mapping and nanoindentation using a dielectric near-field probe, which enables the detection of local emission spectra and emission lifetimes within individual bubbles. Statistical analysis of 67 bubbles uncovers an emission wavelength distribution centered around 780 nm. Furthermore, saturation behavior in the power-dependent studies and the associated lifetime change reveal the localized nature of the strain-induced states. These findings provide direct insights into the strain-localized emission dynamics in bubbles and establish a robust framework for non-destructive, reversible, and predictable nanoscale emission control, presenting a potential avenue for developing next-generation tunable quantum optical sources.

2D materials bubbles↗
DOE OSTI2025

Self‐Strain Suppression of the Metal‐to‐Insulator Transition in Phase‐Change Oxide Devices

Strongly correlated materials exhibiting phase transitions which can be controlled through external stimuli, such as electric fields, are promising for future computing technologies beyond conventional semiconductor transistors. Devices that take advantage of structural phase transitions have inherent built‐in memory, reminiscent of synapses and neurons, and are thus natural candidates for neuromorphic computing. Of particular interest are phase‐change oxides, which allow for control over the metal‐to‐insulator transition. Here, X‐ray nano‐diffraction structural imaging of micro‐devices fabricated with the archetypal phase‐change material vanadium sesquioxide (V 2 O 3 ) is reported. The devices contain a Ga ion‐irradiated region where the metal‐to‐insulator transition critical temperature is lowered, a useful feature for controlling neuron‐like spiking behavior. Results show that strain, induced by crystal lattice mismatch between the pristine and irradiated material, leads to a suppression of the metal‐to‐insulator‐transition. Suppression occurs within the irradiated region or along its edges, depending on the defect‐distribution and the size of the region. The observed self‐straining effect can extend to other phase‐change oxides and dominate as device dimensions are reduced and become too small to dissipate strain within the irradiated region. The findings are important for phase engineering in phase‐change devices and highlight the necessity to study phase transitions at the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Electronic structure and magnetism of pristine, defected, and strained $\mathrm{Ti_2N}$ $\mathrm{MX}$ene

Here, from first principles electronic structure calculations, we unravel the evolution of structural, electronic, and magnetic properties of pristine, defected, and strained titanium nitride MXene with different functional groups (-F, -O, -H, and -OH). The formation and cohesive energies reveal their chemical stability. The dynamical stability of Ti 2 N mono-layer is also confirmed by phonon calculations. The MAX phase and defect free functionalized MXenes are metallic except for oxygen terminated (Ti 2 NO 2 ) one which is 100% spin polarized half-metallic ferromagnet. The spin–orbit coupling significantly influences the bare MXene (Ti 2 N) to exhibit Dirac topology and band inversion near the high symmetry directions. The strain effect sways the Fermi level thereby shifting it towards lower energy state under compression and towards higher energy state under tensile strain in Ti 2 NH 2 . The Ti 2 NO 2 exhibits exotic electronic structure not only in pristine but also in strained and defected structures. Its half-metallic nature changes to semi-metallic under 1% compression and it is completely destroyed under 2% compression. In single vacancy defect, its band structure remarkably transforms from half-metallic to semi-conducting with large band gap in 12.5% Ti, weakly semi-conducting in 5.5% Ti, and semi-metallic in 12.5% O. The 25% N defect changes its half-metallic characteristic to metallic. Further, the 12.5% Co substitution preserves its half-metallic character, whereas Mn substitution allows it to convert half-metallic characteristic into weak semi-metallic characteristic preserving ferromagnetism. However, Cr substitution converts half-metallic ferromagnetic state to half-metallic anti-ferromagnetic state. The understanding made here on collective structural stability, and electronic band structure, and magnetic phenomena in novel 2D Ti 2 N derived MXenes open up their possibility in designing them for synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heavy boron doping effects on biaxially tensile strained germanium (>1.5%) investigated via structural characterization, effective lifetime assessment and atomistic modeling

Highly tensile strained germanium (ε-Ge) represents an essential material system for emerging electronic and photonics applications. Moreover, adjusting the doping levels to moderate or high concentrations can effectively tailor the properties of ε-Ge for specific applications. This article combines experimental characterization with a theoretical framework to examine the effects of heavy elemental boron (B) doping on pseudomorphic sub-50 nm ε-Ge. High resolution X-ray diffractometry is used to validate tensile strain levels of 1.53% and 1.68% in Ge epilayers, surpassing the indirect-to-direct band gap crossover point at ∼1.5% biaxial tensile strain. Cross-sectional transmission electron microscopy revealed visual evidence of stacking faults and surface roughening in 1.68% ε-Ge, although a coherent and abrupt Ge/III–V heterointerface is observed, devoid of interfacial misfit dislocations. Effective lifetime measurements demonstrated approximately twofold enhancement in 1.53% B-doped ε-Ge (N B ∼7 × 10 19 cm −3 ) compared to its unstrained B-doped counterpart, while no such improvement was observed in 1.68% B-doped ε-Ge. This lack of enhancement is attributed to the presence of stacking faults and surface roughness within the ε-Ge epilayer. Through density functional theory calculations, we independently demonstrate that substitutional B atoms induce local deformation of Ge–Ge bonds in both unstrained Ge and ε-Ge epilayers, resulting in an additive tensile strain. This phenomenon could potentially lead to dynamic reduction and overcoming of the critical layer thickness for the system, facilitating the nucleation and subsequent glide of 90° leading Shockley partial dislocations, thereby generating stacking faults. In essence, these findings establish an upper limit on the B-doping concentration that can be achieved in highly ε-Ge epilayers, and collectively, offer valuable insights into the significance of heavy doping in Ge-based heterostructures. As such, this study delineates a fundamental constraint for integrating heavily doped ε-Ge in high-performance optoelectronic systems, necessitating precise strain-doping co-optimization to avoid performance degradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Engineering metal oxidation using epitaxial strain

The oxides of platinum group metals are promising for future electronics and spintronics due to the delicate interplay of spin-orbit coupling and electron correlation energies. However, their synthesis as thin films remains challenging due to their low vapour pressures and low oxidation potentials. Here we show how epitaxial strain can be used as a control knob to enhance metal oxidation. Using Ir as an example, we demonstrate the use of epitaxial strain in engineering its oxidation chemistry, enabling phase-pure Ir or IrO 2 films despite using identical growth conditions. The observations are explained using a density-functional-theory-based modified formation enthalpy framework, which highlights the important role of metal-substrate epitaxial strain in governing the oxide formation enthalpy. We also validate the generality of this principle by demonstrating epitaxial strain effect on Ru oxidation. The IrO 2 films studied in our work further revealed quantum oscillations, attesting to the excellent film quality. The epitaxial strain approach we present could enable growth of oxide films of hard-to-oxidize elements using strain engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Energy barriers for Dy and H penetrating graphene on 6 H -SiC(0001) and freestanding bilayer graphene from first-principles calculations

Currently, intercalation of foreign guest atoms into two-dimensional (2D) layered van der Waals materials is an active research area motivated in part by the development of next-generation energy-storage technologies and optoelectronic devices. One such extensively studied 2D material is the graphene-on-SiC system. To realize and control the desired intercalated structures, it is fundamentally important to understand the kinetic process of intercalation. For the intercalation of a guest atom into graphene layers on SiC substrate, a critical kinetic parameter is the energy barrier of a guest atom penetrating the perfect graphene top layer into the gallery under it. However, accurate theoretical calculations for such penetration barriers are unavailable in literature. From our first-principles density functional theory calculations, we obtain the global energy barriers of 3.47 and 1.80 eV for single Dy and H atoms penetrating the graphene top layer on a graphene buffer layer supported by a Si-terminated 6H-SiC(0001) substrate, respectively. Furthermore, for comparison as well as for examining the lateral strain effects, we also obtain the global barriers of 5.05 and 1.50 eV for single Dy and H atoms penetrating freestanding bilayer graphene with a tensile strain of about 8.8% to match our model for supported graphene, as well as the global barriers of 7.21 and 4.18 eV for penetrating unstrained freestanding bilayer graphene, respectively. From corresponding minimum energy paths with multiple energy minima and saddle points, we can also obtain various local energy barriers and the global backward barrier from the graphene gallery back to the top surface.

2D materials↗
DOE OSTI2020

Spark plasma sintering (SPS) densified U 3 Si 2 pellets: Microstructure control and enhanced mechanical and oxidation properties

Dense U 3 Si 2 pellets with controlled grain structure and enhanced thermal-mechanical and oxidation properties are synthesized with spark plasma sintering (SPS). Microstructure and phase composition of the SPS densified pellets are characterized systematically using SEM, EDS, and XRD. Thermal-mechanical properties and oxidation behavior of the sintered silicide fuel pellets are analyzed by laser flash, indentation, and dynamic thermogravimetric analysis. Dense U 3 Si 2 pellets are consolidated by combining high energy ball milling and rapid sintering by SPS, and the microstructure structures are controlled from micron-sized (~5.7 μm grain size) for conventional silicide to a nanocrystalline matrix with an average grain size of ~280 nm. A dominant phase of distorted U 3 Si 2 was identified with lattice expansion due to residual thermal stress upon SPS consolidation and rapid cooling processes. Both micron-sized and nano-sized pellets show exceptional thermal transport properties, consistent with monolithic silicides reported in literature. The SPS-densified pellets possess simultaneously high hardness and fracture toughness. The SPS-densified silicide pellets also demonstrate exceptional oxidation performance with extended onset oxidation temperature above 500 °C and reduced oxidation kinetics, particularly for nano-sized pellets. A strong strain effect was proposed in which compressive stress in nano-sized pellets enhances the oxidation resistance of silicide fuels, as evidenced by the degradation of oxidation performance upon strain relaxation by isothermal annealing. The correlation among the sintering process – microstructure control – physical properties and fuel behavior is established. A new concept of strain engineering is proposed further properties optimization, enabling the development of potential oxidation and corrosion-resistant silicides with extended performance, the key technological challenge of U 3 Si 2 as the leading concept of accident tolerant fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Concurrent measurement of strain and chemical reaction rates in a calcite grain pack undergoing pressure solution: Evidence for surface-reaction controlled dissolution

Pressure solution is inferred to be a significant contributor to sediment compaction and lithification, especially in carbonate sediments. For a sediment deforming primarily by pressure solution, the compaction rate should be directly related to the rate of calcite dissolution, transport along grain contacts, and calcite reprecipitation. Previous experimental work has shown that there is evidence that deformation in wet calcite grain packs is consistent with control by pressure solution, but considerable ambiguity remains regarding the rate limiting mechanism. We present the results of laboratory compaction experiments designed to directly measure calcite dissolution and precipitation rates (recrystallization rates) concurrently with strain rate to test whether measured rates are consistent with predicted rates both in absolute magnitude and time evolution. Recrystallization rates are measured using trace element chemistry (Sr/Ca, Mg/Ca) and isotopes (87Sr/86Sr) of fluids flowing slowly through a compacting grain pack as it is being triaxially compressed. Imaging techniques are used to characterize the grain contacts and strain effects in the post-experiment grain pack. Our data show that calcite recrystallization rates calculated from all three geochemical parameters are in approximate agreement and that the rates closely track strain rate. The geochemically inferred rates are close to predicted rates in absolute magnitude. Uncertainty in grain contact dimensions makes distinguishing between surface reaction control and diffusion control difficult. Measured reaction rates decrease faster than predicted from standard pressure solution creep flow laws. This inconsistency may indicate that calcite dissolution rates at grain contacts are more complex, and more time-dependent, than suggested by geometric models designed to predict grain contact stresses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The role of temperature on defect diffusion and nanoscale patterning in graphene

Graphene is of great scientific interest due to a variety of unique properties such as ballistic transport, spin selectivity, the quantum hall effect, and other quantum properties. Nanopatterning and atomic scale modifications of graphene are expected to enable further control over its intrinsic properties, providing ways to tune the electronic properties through geometric and strain effects, introduce edge states and other local or extended topological defects, and sculpt circuit paths. The focused beam of a scanning transmission electron microscope (STEM) can be used to remove atoms, enabling milling, doping, and deposition. Utilization of a STEM as an atomic scale fabrication platform is increasing; however, a detailed understanding of beam-induced processes and the subsequent cascade of aftereffects is lacking. Here, we examine the electron beam effects on atomically clean graphene at a variety of temperatures ranging from 400 to 1000 °C. We find that temperature plays a significant role in the milling rate and moderates competing processes of carbon adatom coalescence, graphene healing, and the diffusion (and recombination) of defects. The results of this work can be applied to a wider range of 2D materials and introduce better understanding of defect evolution in graphite and other bulk layered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

New approaches for achieving more perfect transition metal oxide thin films

This perspective considers the enormous promise of epitaxial functional transition metal oxide thin films for future applications in low power electronic and energy applications since they offer wide-ranging and highly tunable functionalities and multifunctionalities, unrivaled among other classes of materials. It also considers the great challenges that must be overcome for transition metal oxide thin films to meet what is needed in the application domain. These challenges arise from the presence of intrinsic defects and strain effects, which lead to extrinsic defects. Current conventional thin film deposition routes often cannot deliver the required perfection and performance. Since there is a strong link between the physical properties, defects and strain, routes to achieving more perfect materials need to be studied. Several emerging methods and modifications of current methods are presented and discussed. The reasons these methods better address the perfection challenge are considered and evaluated.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Reverse-Engineering Strain in Nanocrystallites by Tracking Trimerons

Although strain underpins the behavior of many transition-oxide-based magnetic nanomaterials, it is elusive to quantify. Since the formation of orbital molecules is sensitive to strain, a metal–insulator transition should be a window into nanocrystallite strain. Using three sizes of differently strained Fe 3 O 4 polycrystalline nanorods, the impact of strain on the Verwey transition and the associated formation and dissolution processes of quasiparticle trimerons is tracked. In 40 and 50 nm long nanorods, increasing isotropic strain results in Verwey transitions going from T V ≈ 60 K to 20 K. By contrast, 700 nm long nanorods with uniaxial strain along the (110) direction have T V ≈ 150 K—the highest value reported thus far. A metal–insulator transition, like T V in Fe 3 O 4 , can be used to determine the effective strain within nanocrystallites, thus providing new insights into nanoparticle properties and nanomagnetism.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ordering in GaAs co-doped with Bi and N

Introducing only a few atomic percent of Bi or N in GaAs has a large effect on the band gap of the material. Specifically Bi doped GaAs shows potential for local band gap engineering in optoelectronic applications. The incorporation of Bi and N into GaAs is difficult due to strain effects. In this work we study the ordering of these dopants at the atomic scale in order to get a better understanding of the behavior of these dopants in the host lattice. Cross-sectional scanning tunneling microscopy is used to find the exact position of Bi and N dopants in the GaAs matrix, allowing us to study both their nearest neighbor pair occurrences and pair correlation functions. An attractive interaction between Bi dopants at short ranges (1-2 nm) is found and a similar effect is observed between N dopants. Here, we find a repulsive interaction with a similar length scale between Bi and N dopants. A similar repulsion is found in the Bi-N nearest neighbor pairs. Density functional theory is used to calculate the different nearest neighbor pair energies and test these results to the experimental pair occurrences. It is concluded from the experimental and theoretical results that the growth conditions and N inclusion greatly affects the Bi distribution in GaAs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Distributed Fiber Optic Sensing for in-well hydraulic fracture monitoring

This study presents the results from in-well hydraulic fracture monitoring within a horizontal well in an unconventional reservoir utilizing Distributed Fiber Optic Sensing (DFOS). An in-house-developed Brillouin-based Distributed Strain Sensing (DSS) interrogator was deployed to obtain strain measurements, complemented by a commercial Raman-based Distributed Temperature Sensing (DTS) interrogator for temperature measurements and a commercial Rayleigh-based Low-Frequency Distributed Acoustic Sensing (LF-DAS) interrogator for strain-rate measurements. Examined over a ten-day period, the spatio-temporal distribution of temperature-compensated strain obtained from DSS and DTS revealed distinct signatures of the multi-stage hydraulic fracturing process. These signatures were analyzed with respect to fracture width growth and closure, residual strain effects, and fracture conductivity near the wellbore. Fracture widths within the fracture zone were estimated for individual stages. The findings were assessed with LF-DAS measurements for further evaluation. This work integrates DFOS-measured strain, temperature, and strain-rate data for monitoring in-well hydraulic fracturing, with the goal of supporting future studies in interpreting DFOS measurements for improved understanding of hydraulic fracturing in unconventional reservoirs.

58 GEOSCIENCES↗
DOE OSTI2020

Strain-induced creation and switching of anion vacancy layers in perovskite oxynitrides

Perovskite oxides can host various anion-vacancy orders, which greatly change their properties, but the order pattern is still difficult to manipulate. Separately, lattice strain between thin film oxides and a substrate induces improved functions and novel states of matter, while little attention has been paid to changes in chemical composition. Here we combine these two aspects to achieve strain-induced creation and switching of anion-vacancy patterns in perovskite films. Epitaxial SrVO 3 films are topochemically converted to anion-deficient oxynitrides by ammonia treatment, where the direction or periodicity of defect planes is altered depending on the substrate employed, unlike the known change in crystal orientation. First-principles calculations verified its biaxial strain effect. Like oxide heterostructures, the oxynitride has a superlattice of insulating and metallic blocks. Given the abundance of perovskite families, this study provides new opportunities to design superlattices by chemically modifying simple perovskite oxides with tunable anion-vacancy patterns through epitaxial lattice strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Thermodynamic Preference for Atom Adsorption on versus Intercalation into Multilayer Graphene

The thermodynamic preference of a foreign atom for adsorption on versus intercalation into a graphitic surface is of fundamental and widespread interest. From an exhaustive first-principles density functional theory investigation for 38 typical elements over the periodic table, we reveal a quasilinear correlation between the Shannon effective ionic radius and the chemical-potential difference for a single atom from adsorption to intercalation at multilayer graphene surfaces. A critical Shannon radius is found to be around 0.10 nm, below (above) which intercalation (adsorption) is more favorable for elements with ionic-like bonding after intercalation. Single atoms with van der Waals-biased bonding show some deviation from the linear relationship, while single atoms for the elements with covalent-like bonding do not favor intercalation relative to adsorption. An energy decomposition analysis indicates that the chemical-potential difference determining the thermodynamic preference of a foreign atom for adsorption versus intercalation results from the competition between the electronic and elastic strain effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Functional Adaptation of LPS-affected Dentoalveolar Fibrous Joints in Rats

We report the functional interplay between cementum of the root and alveolar bone of the socket is tuned by a uniquely positioned 70–80 µm wide fibrous and lubricious ligament in a dentoalveolar joint (DAJ). In this study, structural and biomechanical properties of the DAJ, periodontal ligament space (PDL-space also known as the joint space), alveolar bone of the socket, and cementum of the tooth root that govern the biomechanics of a lipopolysaccharide (LPS)-affected DAJ were mapped both in space and time. The hemi-maxillae from 20 rats (4 control at 6 weeks of age, 4 control and 4 LPS-affected at 12 weeks of age, 4 control and 4 LPS-affected at 16 weeks of age) were investigated using a hybrid technique; micro-X-ray computed tomography (5 µm resolution) in combination with biomechanical testing in situ. Temporal variations in bone and cementum volume fractions were evaluated. Trends in mineral apposition rates (MAR) in additional six Sprague Dawley rats (3 controls, 3 LPS-affected) were revealed by transforming spatial fluorochrome signals to functional growth rates (linearity factor - RW) of bone, dentin, and cementum using a fast Fourier transform on fluorochrome signals from 100-µm hemi-maxillae sections. An overall change in LPS-affected DAJ biomechanics (a 2.5–4.5X increase in tooth displacement and 2X tooth rotation at 6 weeks, no increase in displacement and a 7X increase in rotation at 12 weeks; 27% increase in bone effective strain at 6 weeks and 11% at 12 weeks relative to control) was associated with structural changes in the coronal regions of the DAJ (15% increase in PDL-space from 0 to 6 weeks but only 5% from 6 to 12 weeks compared to control). A significant increase (p < 0.05) in PDL-space between ligated and age-matched control was observed. The bone fraction of ligated at 12 weeks was significantly lower than its age-matched control, and no significant differences (p > 0.05) between groups were observed at 6 weeks. Cementum in the apical regions grew faster but nonlinearly (11% and 20% increase in cementum fraction (CF) at 6 and 12 weeks) compared to control. Alveolar bone revealed site-specific nonlinear growth with an overall increase in MAR (108.5 µm/week to 126.7 µm/week after LPS treatment) compared to dentin (28.3 µm/week in control vs. 26.1 µm/week in LPS-affected) and cementum (126.5 µm/week in control vs. 119.9 µm/week in LPS-affected). A significant increase in CF (p < 0.05) in ligated specimens was observed at 6 weeks of age. Anatomy-specific responses of cementum and bone to the mechano-chemo stimuli, and their collective temporal contribution to observed changes in PDL-space were perpetuated by altered tooth movement. Data highlight the “resilience” of DAJ function through the predominance of nonlinear growth response of cementum, changes in PDL-space, and bone architecture. Despite the significant differences in bone and cementum architectures, data provided insights into the reactionary effects of cementum as a built-in compensatory mechanism to reestablish functional competence of the DAJ. The spatial shifts in architectures of alveolar bone and cementum, and consequently ligament space, highlight adaptations farther away from the site of insult, which also is another novel insight from this study. These adaptations when correlated within the context of joint function (biomechanics) illustrate that they are indeed necessary to sustain DAJ function albeit being pathological.

60 APPLIED LIFE SCIENCES↗