Search NASA⌕ Search

SEARCH · Search NASA

Results for “strong metal−support interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

70 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Infrared reflection absorption spectroscopy and temperature-programmed desorption studies of CO adsorption on Ni/CeO 2 (111) thin films: The role of the ceria support

Ceria-supported Ni has shown unique catalytic activity due to unique properties of small Ni particles and strong metal-support interaction. Identification of adsorption sites and understanding the chemical interaction over Ni-ceria at the fundamental level provide crucial insights into the reaction pathways of complex catalytic processes. In this study, to probe the surface sites, the adsorption of CO was carried out with model Ni/ceria systems consisting of Ni nanoparticles vapor-deposited on well-ordered CeO x (111) (1.5 < x < 2) thin films using infrared reflection absorption spectroscopy (IRRAS) and temperature-programmed desorption (TPD) under ultrahigh vacuum (UHV) conditions. Fully oxidized CeO 2 (111) (Ce 4+ ) and partially reduced CeO 1.75 (111) (Ce 4+ /Ce 3+ ) thin films were grown on Ru(0001) to examine the role of the ceria support. Additionally, Ni with low coverages (e.g., 0.2 ML) grows forming small two-dimensional particles on ceria at 300 K, which develop into three-dimensional clusters after heating to 700 K. In the absence of Ni, CO adsorption at 1 mTorr at 100 K shows distinct IR bands at 2158 cm -1 on CeO 2 and 2165 cm -1 on CeO 1.75 . Bridging and atop IR bands associated with CO adsorption over metallic Ni were observed on the Ni-CeO 1.75 surface at 300 K under UHV conditions. CO adsorption over Ni 0 was also observed over as-deposited Ni on CeO 2 . However, a new IR band at 2146 cm -1 due to CO adsorption over Ni 2+ species was detected at 100 K over the annealed Ni particles on CeO 2 . CO IRRAS data suggest the oxidation of Ni to Ni 2+ on CeO 2 and the formation of predominant Ni 2+ species with heating, which is further confirmed with CO TPD data and previous x-ray photoelectron spectroscopy results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metal–Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal–Support Bonding, Ordered Intermetallics, and Single Atoms

In-depth investigation of metal–metal oxide interactions and their corresponding evolution is of paramount importance to heterogeneous catalysis as it allows the understanding and maneuvering of the structure of catalytic motifs. Herein, using a series of core/shell metal/iron oxide (M/FeO x , M = Pd, Pt, Au) nanoparticles and through a combination of in situ and ex situ electron and X-ray investigations, we revealed anomalous and dissimilar M–FeO x interactions among different systems under reducing conditions. Further, Pd interacts strongly with FeO x after high-temperature reductive treatment, featured by the formation of Pd single atoms in the FeO x matrix and increased Pd–Fe bonding, while Pt transforms into ordered PtFe intermetallics and Pt single atoms immediately upon the coating of FeO x . In contrast, Au does not manifest strong bonding with FeO x . As a proof of concept of tailoring metal–metal oxide interactions for catalysis, optimized Pd/FeO x demonstrates 100% conversion and 86.5% selectivity at 60 °C for acetylene semihydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Steam-Assisted Selective CO 2 Hydrogenation to Ethanol over Ru–In Catalysts

Multicomponent catalysts can be designed to synergistically combine reaction intermediates at interfacial active sites, but restructuring makes systematic control and understanding of such dynamics challenging. In this work, we unveil how reducibility and mobility of indium oxide species in Ru-based catalysts crucially control the direct, selective conversion of CO 2 to ethanol. When uncontrolled, reduced indium oxide species occupy the Ru surface, leading to deactivation. With the addition of steam as a mild oxidant and using porous polymer layers to control In mobility, Ru–In 2 O 3 interface sites are stabilized, and ethanol can be produced with superior overall selectivity (70 %, rest CO). Our work highlights how engineering of bifunctional active ensembles enables cooperativity and synergy at tailored interfaces, which unlocks unprecedented performance in heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mechanism of Methanol Decomposition over Single-Site Pt 1 /CeO 2 Catalyst: A DRIFTS Study

Single-site catalysts have drawn broad attention in catalysis because of their maximum atomic utilization and unique catalytic performance. Early work in our group has shown a 40-fold higher activity of methanol decomposition over single-site Pt 1 /CeO 2 catalyst than CeO 2 supported 2.5 nm Pt nanoparticles, while a molecular-level understanding of such enhancement is lacking. Herein, the reaction mechanism of methanol decomposition over Pt 1 /CeO 2 was carefully investigated using in situ DRIFTS, and a reaction pathway was proposed. Methanol molecules were dissociatively adsorbed on nanoceria support first, followed by the diffusion of as-formed methoxy species onto Pt single sites where the dehydrogenation occurs and results in the weakly bonded CO. The ease of methanol dissociative adsorption on nanoceria support and the tailored electronic property of Pt 1 via the metal-support interaction are believed to be strongly correlated with the high activity of Pt 1 /CeO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Designing ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts for three-way catalysts applications

Designing Rh-free, especially Pt-only, three-way catalysts with improved low-temperature activity/stability is highly desirable. Herein, we demonstrate that ultrastable Pt/CeO 2 -Al 2 O 3 nanosheet catalysts can be obtained based on a Sabatier principle of metal-support interaction. Tuning the surface coverage of penta-site rich γ-Al 2 O 3 nanosheets (AlNS, weak adhesion to Pt) by CeO 2 “nano-islands” (strong adhesion to Pt) can lead to the synthesis of Pt/60 wt.%CeO 2 -AlNS that have lower light-off temperatures for CO, hydrocarbons, and NO compared to conventional Pt/CeO 2 and Pt/Al 2 O 3 catalysts by 100–200°C and a similar performance with the state-of-the-art Rh-based catalyst. Further, incorporating CeO 2 on the surface of AlNS can retard the sintering of CeO 2 during harsh redox hydrothermal aging, associate with the strong interaction between CeO 2 “nano-island” and penta-site rich γ-Al 2 O 3 nanosheets. Moreover, the improved activity/stability of Pt/CeO 2 -AlNS catalysts can be attributed to tuning of the Pt detachment and migration from and back to the CeO 2 “nano-islands”, respectively, that keeps Pt as nanoclusters on CeO 2 , the most active species for three-way catalyst applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamic Metal–Support Interaction Dictates Cu Nanoparticle Sintering on Al 2 O 3 Surfaces

Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model based on the Perdew–Burke–Ernzerhof approximation of density functional theory for Cu nanoparticles on three Al 2 O 3 surfaces (γ-Al 2 O 3 (100), γ-Al 2 O 3 (110), and α-Al 2 O 3 (0001)). Using DP-accelerated simulations, we reveal that the nanoparticle size-mobility relationship strongly depends on the supporting surface. The diffusion of nanoparticles on the two γ-Al 2 O 3 surfaces is almost independent of the size of the nanoparticle, while the diffusion on α-Al 2 O 3 (0001) decreases rapidly with increasing size. Interestingly, nanoparticles with fewer than 55 atoms diffuse several times faster on α-Al 2 O 3 (0001) than on γ-Al 2 O 3 (100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. The diffusion on α-Al 2 O 3 (0001) is facilitated by dynamic metal–support interaction (MSI), where Al atoms move out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on γ-Al 2 O 3 (100) and on γ-Al 2 O 3 (110) is dominated by more stable and directional Cu–O bonds, consistent with the limited diffusion observed on these surfaces. Our extended MD simulations provide insight into the sintering processes, showing that the dispersity of the nanoparticles strongly influences the coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu 13 nanoparticles on α-Al 2 O 3 (0001) can occur in a short time (10 ns) at 800 K even with an initial internanoparticle distance increased to 3 nm, while the coalescence on the two γ-Al 2 O 3 surfaces are inhibited significantly by increasing the initial internanoparticle distance. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pt Nanoparticle Disintegration at Oxide Interfaces Enhances CO Oxidation Catalysis

Understanding how supported metal nanoparticles dynamically evolve under reaction conditions is critical for controlling their catalytic function. Here, the mechanism behind the dynamic disintegration of Pt nanoparticles (NPs) supported on CeOx-TiO2 (CT) during CO oxidation is elucidated, leading to the formation of single atoms (SAs) and/or sub-nanometer clusters. Density functional theory (DFT) calculations reveal that strong Pt-CO interactions weaken Pt─Pt cohesion, while electronic coupling between Pt and Ce ions stabilizes Pt-CO* intermediates at the oxide interface. Surface oxygen vacancies kinetically trap Pt-CO*, but the vacancies are replenished under oxygen-rich conditions, enabling Pt-CO* surface diffusion and subsequent structural reorganization. In situ spectroscopic analyses confirm the oxygen-driven transformation of Pt NPs, correlating with a threefold increase in mass-specific activity at 150 °C. These findings demonstrate that interfacial oxygen dynamics and metal-support interactions can be leveraged to induce nanoparticle disintegration and optimize catalytic performance, highlighting the catalytic potential of interface-engineered Pt nanostructures.

CO oxidation↗
DOE OSTI2020

Carbide-Modified Pd on ZrO2 as Active Phase for CO2-Reforming of Methane—A Model Phase Boundary Approach

Starting from subsurface Zr0-doped “inverse” Pd and bulk-intermetallic Pd0Zr0 model catalyst precursors, we investigated the dry reforming reaction of methane (DRM) using synchrotron-based near ambient pressure in-situ X-ray photoelectron spectroscopy (NAP-XPS), in-situ X-ray diffraction and catalytic testing in an ultrahigh-vacuum-compatible recirculating batch reactor cell. Both intermetallic precursors develop a Pd0–ZrO2 phase boundary under realistic DRM conditions, whereby the oxidative segregation of ZrO2 from bulk intermetallic PdxZry leads to a highly active composite layer of carbide-modified Pd0 metal nanoparticles in contact with tetragonal ZrO2. This active state exhibits reaction rates exceeding those of a conventional supported Pd–ZrO2 reference catalyst and its high activity is unambiguously linked to the fast conversion of the highly reactive carbidic/dissolved C-species inside Pd0 toward CO at the Pd/ZrO2 phase boundary, which serves the role of providing efficient CO2 activation sites. In contrast, the near-surface intermetallic precursor decomposes toward ZrO2 islands at the surface of a quasi-infinite Pd0 metal bulk. Strongly delayed Pd carbide accumulation and thus carbon resegregation under reaction conditions leads to a much less active interfacial ZrO2–Pd0 state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advancing Photo(Electro)Chemical Water Splitting: The Promise of Atomically Dispersed Single‐, Dual‐, and Alloy‐Site Catalysts

Single-atom catalysts (SACs) have rapidly gained prominence as an emerging class of electrocatalysts for water splitting, owing to their uniform and precisely defined active sites. By maintaining uniform reaction pathways, SACs minimize the formation of unwanted byproducts, thus exhibiting extremely high selectivity and atomic efficiency. A key determinant of SAC performance lies in the interfacial interaction between the isolated metal atoms and the supporting material under strong metal–support coordination, which is vital for maintaining long-term activity. However, despite these benefits, reproducibly synthesizing SACs with high metal loadings while retaining uniform dispersion remains a significant challenge. To address the intrinsic challenges of SACs, recent research has expanded into dual-atom catalysts (DACs) and single-atom alloy catalysts (SAACs), providing synergistic active sites and combining the benefits of SACs with bimetallic systems. Furthermore, this review systematically explores the latest advancements in synthesis methods and innovations for SACs for electrochemical water splitting. Additionally, it examines the evolution of catalyst design, emphasizing the unique structural and electronic characteristics of single-site, dual-site, and alloyed SAC systems and highlighting their critical roles in accelerating water-splitting reaction kinetics as well as the prevailing challenges and outlining promising directions for advancing hydrogen production via water electrolysis.

08 HYDROGEN↗
DOE OSTI2020

Calorimetric metal vapor adsorption energies for characterizing industrial catalyst support materials

Many important catalysts and electro-catalysts for energy and environmental technologies involve late transition metal atoms and nanoparticles dispersed across the surface of high-surface-area support materials, for example, oxide nanoparticles. The surface reactivity and long-term stability against deactivation of these materials depends strongly on the strength of bonding of the metal atom and nanoparticles to the support surface. Here, we introduce a novel calorimetry method that implements a LiTaO 3 crystal for heat detection and extends metal adsorption calorimetry to surfaces of nanomaterials that are deposited from liquid solutions, as is typical when preparing industrial catalyst supports. This allows one to measure the strength of metal atom bonding and the adhesion energy of metal nanoparticles to clean surfaces of technologically relevant catalyst supports. We demonstrate that here by measuring the heat of Ag vapor adsorption onto the clean surfaces of high-surface-area TiO 2 anatase powdered support materials (i.e., 5-nm-diameter nanoparticles). These heats of adsorption show a pulse-to-pulse standard deviation of only 9.3 kJ/mol (3.3%) for pulses containing only 1% of a monolayer of Ag vapor, with potential for a 5-fold reduction in noise if used with another metal evaporator. The calorimeter was also proven to work well measuring heats of Ag adsorption on calcium niobate(001) nanosheets deposited as thin films from liquid solution. Here, this calorimeter opens up the possibility of using metal adsorption calorimetry to screen catalyst support materials for the strengths with which they bind metal atoms and metal nanoparticles, offering new opportunities to discover better support materials or for basic scientific study of structure / function relationships with respect to metal / support bond energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomically Dispersed Metals on Well-Defined Supports including Zeolites and Metal–Organic Frameworks: Structure, Bonding, Reactivity, and Catalysis

When metals in supported catalysts are atomically dispersed, they are usually cationic and bonded chemically to supports. Investigations of noble metals in this class are growing rapidly, leading to discoveries of catalysts with new properties. Characterization of these materials is challenging because the metal atoms reside on surfaces that are typically nonuniform in composition and structure. We posit that understanding of structures and catalytic properties of these materials is emerging most strongly from investigations of structurally uniform catalysts (metal atoms dispersed on crystalline supports) which can be characterized incisively with atomic-resolution electron microscopy, X-ray absorption spectroscopy, and infrared spectroscopy, bolstered by density functional theory. We assess the literature of such catalysts supported on zeotype materials, metal–organic frameworks, and covalent organic frameworks. Finally, assessing characterization, reactivity, and catalytic performance of catalysts for oxidation, hydrogenation, the water–gas shift reaction, and others, we consider metal–support interactions and ligand effects for various metal–support combinations, evaluating the degree of structural uniformity of exemplary catalysts and summarizing structure–reactivity and structure–catalytic property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Regulating Catalytic Properties and Thermal Stability of Pt and PtCo Intermetallic Fuel-Cell Catalysts via Strong Coupling Effects between Single-Metal Site-Rich Carbon and Pt

Developing low platinum-group-metal (PGM) catalysts for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles (HDVs) remains a great challenge due to the highly demanded power density and long-term durability. Here, this work explores the possible synergistic effect between single Mn site-rich carbon (Mn SA -NC) and Pt nanoparticles, aiming to improve intrinsic activity and stability of PGM catalysts. Density functional theory (DFT) calculations predicted a strong coupling effect between Pt and MnN 4 sites in the carbon support, strengthening their interactions to immobilize Pt nanoparticles during the ORR. The adjacent MnN 4 sites weaken oxygen adsorption at Pt to enhance intrinsic activity. Well-dispersed Pt (2.1 nm) and ordered L1 2 -Pt 3 Co nanoparticles (3.3 nm) were retained on the Mn SA -NC support after indispensable high-temperature annealing up to 800 °C, suggesting enhanced thermal stability. Both PGM catalysts were thoroughly studied in membrane electrode assemblies (MEAs), showing compelling performance and durability. The Pt@Mn SA -NC catalyst achieved a mass activity (MA) of 0.63 A mg Pt –1 at 0.9 V iR-free and maintained 78% of its initial performance after a 30,000-cycle accelerated stress test (AST). The L1 2 -Pt 3 Co@Mn SA -NC catalyst accomplished a much higher MA of 0.91 A mg Pt –1 and a current density of 1.63 A cm –2 at 0.7 V under traditional light-duty vehicle (LDV) H 2 –air conditions (150 kPa abs and 0.10 mg Pt cm –2 ). Furthermore, the same catalyst in an HDV MEA (250 kPa abs and 0.20 mg Pt cm –2 ) delivered 1.75 A cm –2 at 0.7 V, only losing 18% performance after 90,000 cycles of the AST, demonstrating great potential to meet the DOE targets.

25 ENERGY STORAGE↗
DOE OSTI2019

Evidence for interfacial geometric interactions at metal–support interfaces and their influence on the electroactivity and stability of Pt nanoparticles

Supported metals are widely used as industrial catalysts wherein the supports affect catalytic performances remarkably through either electronic and/or geometric interactions with the metals, and/or providing interfacial synergistic sites. Herein, we observed evidence for interfacial geometric interactions (IGIs) at Pt–C interfaces through a combination of atomic-scale structural analysis, in situ X-ray absorption fine structure, and electrochemical measurements for Pt/C model systems. The IGI has a long-range attribute and affects Pt surface atoms not only at interfacial perimeters but also adjacent to interfaces. The affected Pt surface atoms are proposed to contribute enhanced activity and stability for the oxygen reduction reaction through retarding the formation of strongly adsorbed oxygenated intermediates. Our work provides some necessary information for a better understanding of support effects and catalytically active surface sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomically dispersed Ag on δ-MnO 2 via cation vacancy trapping for toluene catalytic oxidation

The regulation of metal–support interaction (MSI) and the improvement of noble metal utilization are the frontiers of volatile organic compound (VOC) catalytic oxidation. Here, we report a H 2 O 2 -assisted synthesis process for trapping Ag + onto the engineered Mn vacancies of δ-MnO 2 for the catalytic oxidation of toluene. Due to the strong MSI between Ag and δ-MnO 2 , the monoatomic Ag + anchored on cation vacancies forms longer and weakened Ag–O bonds compared with Ag 2 O, which can extra promote the formation of oxygen vacancies and the activation of adjacent lattice oxygen in Ag–O–Mn units compared with regular nanoparticle counterparts. It is beneficial to the steps of methyl dehydrogenation, demethylation, and benzene ring cleavage. The catalyst yields excellent toluene oxidation activity, enhanced turnover frequency in terms of Ag, and good stability. Finally, we propose in this study a facile design strategy for fabricating stably atomically dispersed metal sites, as well as clarify the structure–activity relationships during toluene catalytic oxidation, especially the important effect of single-atom Ag on the adjacent local structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced and stabilized hydrogen production from methanol by ultrasmall Ni nanoclusters immobilized on defect-rich h-BN nanosheets

Employing liquid organic hydrogen carriers (LOHCs) to transport hydrogen to where it can be utilized relies on methods of efficient chemical dehydrogenation to access this fuel. Therefore, developing effective strategies to optimize the catalytic performance of cheap transition metal-based catalysts in terms of activity and stability for dehydrogenation of LOHCs is a critical challenge. Here, we report the design and synthesis of ultrasmall nickel nanoclusters (∼1.5 nm) deposited on defect-rich boron nitride (BN) nanosheet (Ni/BN) catalysts with higher methanol dehydrogenation activity and selectivity, and greater stability than that of some other transition-metal based catalysts. The interface of the two-dimensional (2D) BN with the metal nanoparticles plays a strong role both in guiding the nucleation and growth of the catalytically active ultrasmall Ni nanoclusters, and further in stabilizing these nanoscale Ni catalysts against poisoning by interactions with the BN substrate. We provide detailed spectroscopy characterizations and density functional theory (DFT) calculations to reveal the origin of the high productivity, high selectivity, and high durability exhibited with the Ni/BN nanocatalyst and elucidate its correlation with nanocluster size and support–nanocluster interactions. This study provides insight into the role that the support material can have both regarding the size control of nanoclusters through immobilization during the nanocluster formation and also during the active catalytic process; this twofold set of insights is significant in advancing the understanding the bottom-up design of high-performance, durable catalytic systems for various catalysis needs.

08 HYDROGEN↗