SEARCH · Search NASA

Results for “suction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Improved Woodward's panel method for calculating edge suction forces

A new technique to improve Woodward's (1968) unified subsonic and supersonic panel method is described. The pressure prediction is improved based on a new two-dimensional theory. The method used by Lan (1977) is then used to calculate the leading-edge and side-edge suction forces by direct use of the predicted pressure distribution. The method is applicable to both subsonic and supersonic flow. It is shown that the improved Woodward panel method is capable of accurately predicting leading-edge and side-edge suction forces in subsonic and supersonic flow. Therefore, the method can be used not only to predict the vortex lift of complex planforms through the method of suction analogy, but also to calculate some lateral-directional stability derivatives.

Lan, C. E.↗

NASA NTRS1980

Hybrid suction surface for turbulent boundary layer flow

A hybrid suction surface which combines favorable aspects of both uniformly porous and discrete opening suction surfaces has been evaluated experimentally for use with incompressible turbulent boundary layers. The surface consisted of an array of closely spaced slots aligned in the direction of the freestream flow. Direct drag and mean boundary layer velocity profile measurements showed that the slotted surface had nominally the same suction characteristics as a uniformly porous surface.

Wilkinson, S. P.↗

NASA NTRS1980

Design considerations of advanced supercritical low drag suction airfoils

Supercritical low drag suction laminar flow airfoils were laid out for shock-free flow at design freestream Mach = 0.76, design lift coefficient = 0.58, and t/c = 0.13. The design goals were the minimization of suction laminarization problems and the assurance of shock-free flow at freestream Mach not greater than design freestream Mach (for design lift coefficient) as well as at lift coefficient not greater than design lift coefficient (for design freestream Mach); this involved limiting the height-to-length ratio of the supersonic zone at design to 0.35. High design freestream Mach numbers result with extensive supersonic flow (over 80% of the chord) on the upper surface, with a steep Stratford-type rear pressure rise with suction, as well as by carrying lift essentially in front- and rear-loaded regions of the airfoil with high static pressures on the carved out front and rear lower surface.

Pfenninger, W.↗

NASA NTRS1984

A method for computing the leading-edge suction in a higher-order panel method

Experimental data show that the phenomenon of a separation induced leading edge vortex is influenced by the wing thickness and the shape of the leading edge. Both thickness and leading edge shape (rounded rather than point) delay the formation of a vortex. Existing computer programs used to predict the effect of a leading edge vortex do not include a procedure for determining whether or not a vortex actually exists. Studies under NASA Contract NAS1-15678 have shown that the vortex development can be predicted by using the relationship between the leading edge suction coefficient and the parabolic nose drag. The linear theory FLEXSTAB was used to calculate the leading edge suction coefficient. This report describes the development of a method for calculating leading edge suction using the capabilities of the higher order panel methods (exact boundary conditions). For a two dimensional case, numerical methods were developed using the double strength and downwash distribution along the chord. A Gaussian quadrature formula that directly incorporates the logarithmic singularity in the downwash distribution, at all panel edges, was found to be the best method.

Ehlers, F. E.↗

NASA NTRS1984

Analytical study of suction boundary layer control for subsonic V/STOL inlets

Analytical procedures used to evaluate the application of suction boundary-layer control (BLC) to subsonic V/STOL inlets are presented. These procedures have been used to analytically predict the optimum (minimum suction power required) location and extent for a suction slot of two different surface resistances within a subsonic V/STOL inlet. Results of this analytical study are presented.

Boles, M. A.↗

NASA NTRS1985

Hybrid approach to steady transonic normal shock-compressible laminar boundary layer interactions over airfoils with suction

Transonic airfoil flow is to a large degree affected by viscous-inviscid interactions. Among them a key role is played by the boundary layer interaction with the shock wave embedded in the flow field and the interaction of the boundary layer with the sustained adverse pressure gradients. The effects of these interactions can be controlled or suppressed by introducing surface mass transfer such as suction. This investigation deals strictly with the study of shock-laminar boundary layer interactions including distributed mass transfer. The present calculations agree with experiments on a swept LFC wing at low speeds which indicates that with a suitable choice of the extent of the airfoil surface over which suction is applied and adjustment of the suction velocity, full-chord laminar flow can be maintained and separation can be prevented completely.

Ram, R. B.↗

NASA NTRS1986

Design and fabrication of large suction panels with perforated surfaces for laminar flow control testing in a transonic wind tunnel

Considerable progress has been made in the development of perforated suction surface material for laminar flow control applications. Electron-beam perforated titaniuum skin was used as the suction surface. Critical issues related to suction panel manufacturing were identified and largely resolved. The final product included fabrication of a 7-foot chord by 7-foot span perforated laminar flow control wind tunnel model. Techniques used can be adapted to modern aircraft production lines. The report includes details on panel instrumentation and other features required for testing in a transonic pressure tunnel.

Maddalon, D. V.↗

NASA NTRS1987

The measurement of boundary layers on a compressor blade in cascade. II - Suction surface boundary layers

A one-component laser Doppler velocimeter (LDV) has been used to measure the two-dimensional, periodic flow field about a double circular arc, compressor blade in cascade. Eleven boundary layer profiles were taken on both the pressure and suction surfaces of the blade, and two were taken in the near wake. In this part of the study, the LDV system is described and the suction surface flow field is documented. The suction surface profiles appear to separate both at the leading edge and again somewhat beyond midchord; the leading edge separation apparently reattaches by 2.6 percent chord.

Deutsch, Steven↗

NASA NTRS1988

Glancing shock wave-turbulent boundary layer interaction with boundary layer suction

Tests conducted to ascertain the stagnation pressure and flow angularity profiles of a turbulent boundary layer subjected to boundary layer suction (BLS) as it crosses a glancing sidewall shock wave have determined that the boundary layer does not separate upon crossing the shock wave. Without BLS, the upstream influence of the shock wave-induced wall static pressure rise was extensive, of the order of four bloundary layer thicknesses; for the same case, with suction, the extent of upstream influence was 50 percent lower. In addition, flow angularities at the wall were found to be smaller with suction than without it.

Barnhart, P. J.↗

NASA NTRS1992

Liquid draining shut-off induced geyser and slosh wave excitation at suction dip during draining in microgravity

The dynamical behavior of vapor ingestion, liquid residual at the incipience of suction dip, liquid hydrogen shut-off at the incipience of suction dip, and slosh wave excitation under normal and various reduced gravity environments and different flow rates of liquid during draining have been investigated. It shows that the liquid residual at the incipience of suction dip increases as the values of gravity environment decrease from normal gravity to lower reduced gravity, and also that the liquid residual increases as the flow rates of liquid increase during the courses of liquid hydrogen draining. It also shows that slosh waves accompanied by strong geyser are developed for surge-related flowfields at the moment of liquid hydrogen shut-off. Slosh wave excitation, during the liquid hydrogen shut-off, shift the fluid mass distribution in the container which imposes time-dependent variation in spacecraft moment of inertia.

Hung, R. J.↗

NASA NTRS1952

Effect of Mach Number on the Flow and Application of Compressibility Corrections in a Two-Dimensional Subsonic-Transonic Compressor Cascade Having Varied Porous-Wall Suction at the Blade Tips

A cascade of 65-(12)10 compressor blades was tested at one geometric setting over a range of inlet Mach number from 0.12 to 0.89. Two groups of data are presented and compared: the first from the cascade operating conventionally with no boundary-layer control, and the second with the boundary layer controlled by a combination of upstream slot suction and porous-wall suction at the blade tips. A criterion for two-dimensionality was used to specify the degree of boundary-layer control by suction to be applied. The data are presented and an analysis is made to show the effect of Mach number on turning angle, blade wake, pressure distribution about the blade profile and static-pressure rise. The influence of boundary-layer control on these parameters as well as on the secondary losses is illustrated. A system of correlating the measured static-pressure rise through the cascade with the theoretical isentropic values is presented which gives good agreement with the data. The pressure distribution about the blade profile for an inlet Mach number of 0.21 is corrected with the Prandtl-Glauert, Karman-Tsien, and vector-mean velocity - contraction coefficient compressibility correction factors to inlet Mach numbers of 0.6 and 0.7. The resulting curves are compared with the experimental pressure distributions for inlet Mach numbers of 0.6 and 0.7 so that the validity of applying the three corrections can be evaluated.

Briggs, William B.↗

NASA NTRS1957

Perforated Sheets as the Porous Material for a Suction-flap Application

Two-dimensional tests were made of an NACA 0006 airfoil with area suction applied to a porous region on a 0.3-chord trailing-edge flap deflected 50 degrees. The lift with suction approached the value computed from thin-airfoil theory. The lift gains and suction quantity requirements were unaffected by the perforation patterns of the surface over a wide range of hole sizes and spacings.

MATERIALS - TYPES↗

NASA NTRS1948

The Effect of Boundary-layer Control by Suction and of Several High-lift Devices on the Aerodynamic Characteristics in Yaw of a 47.5 Degree Sweptback

An investigation has been made in the Langley full-scale tunnel of a 47.5 degree sweptback wing-fuselage combination equipped for boundary-layer control by suction. The wing aspect ratio was 3.5, the taper ratio was 0.5 and the airfoil sections normal to the quarter-chord line were NACA 61(sub 1)-A112. Tests included the plain wing and the wing with various combinations of extensible leading-edge and split flaps. The investigation was made to determine the effect of boundary-layer control by suction on the aerodynamic characteristics in yaw and on the effectiveness of a split-flap-type aileron for a range of angle of attack and suction-flow coefficient at a Reynolds number of 4.2 x 10 (exp 6) corresponding to a Mach number of approximately 0.07.

BOUNDARY LAYER - COMPLETE WINGS↗

NASA NTRS1948

The Effect of Boundary-layer Control by Suction and Several High-lift Devices on the Longitudinal Aerodynamic Characteristics of a 47.5 Degree Sweptback Wing-fuselage Combination

An investigation has been made in the Langley full-scale tunnel of a 47.5 degree sweptback wing-fuselage combination equipped for boundary-layer control by suction. The wing aspect ratio was 3.5, the taper ratio was 0.5, and the airfoil sections normal to the quarter-chord line were NACA 64(sub 1)-A112. The wing configurations tested included the wing with various combinations of extensible leading-edge and split flaps. The effect of Reynolds number, suction-slot location and suction flow coefficient on the aerodynamic characteristics was determined for the model at zero yaw over a range of angle of attack.

WING-FUSELAGE COMBINATIONS - AIRPLANES↗

NASA NTRS1956

Visualization of Rotor Tip Secondary Flows with Blade Tip Air Discharge and Suction in a Low-speed Turbine

Smoke was used to visualize outer-wall secondary flows in a low-speed turbine utilizing rotor tip air discharge and suction. Photographs as well as visual observations of the effect of tip air discharge and suction were made by independently varying the direction and quantity of the tip air discharge and suction, and varying tip clearance, and main-stream air speed. In addition, the cross-sectional area of the hollow blade discharge opening was varied for the case of tip air discharge.

Kofskey, Milton G↗

NASA NTRS1941

Boundary layer removal by suction

Flight-test data and wind-tunnel data on suction profiles are substantially in agreement. The lift values found in the model test can be actually flown and used as a basis for the design. To visualize the action of the suction, the flow conditions with and without suction on the upper surface were photographed; figures 12 to 15 are sections of the film.

Schrenk, O↗

NASA NTRS1935

Experiments with suction-type wings

The present report collects the investigations of the past years which, while not as yet intended for use in construction, show different possibilities for the building of a suction-type wing and at the same time present some basic explanations concerning the problem of suction. Experiments and results with a thick wing profile are detailed as well as boundary layer removal by suction and sink action. Experiments with flap profiles are also included.

Schrenk, O↗

NASA NTRS2005

Intermittent Behavior of the Separated Boundary Layer along the Suction Surface of a Low Pressure Turbine Blade under Periodic Unsteady Flow Conditions

The paper experimentally and theoretically studies the effects of periodic unsteady wake flow and aerodynamic characteristics on boundary layer development, separation and re-attachment along the suction surface of a low pressure turbine blade. The experiments were carried out at Reynolds number of 110,000 (based on suction surface length and exit velocity). For one steady and two different unsteady inlet flow conditions with the corresponding passing frequencies, intermittency behaviors were experimentally and theoretically investigated. The current investigation attempts to extend the intermittency unsteady boundary layer transition model developed in previously to the LPT cases, where separation occurs on the suction surface at a low Reynolds number. The results of the unsteady boundary layer measurements and the intermittency analysis were presented in the ensemble-averaged and contour plot forms. The analysis of the boundary layer experimental data with the flow separation, confirms the universal character of the relative intermittency function which is described by a Gausssian function.

Oeztuerk, B↗