Search NASA⌕ Search

SEARCH · Search NASA

Results for “sugarcane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Impacts of Pasture Conversion to Sugarcane on Water Fluxes and Water Use Efficiency in the Southeastern US

The expansion of sugarcane (cane), a high-yielding perennial crop, will likely reshape the bioenergy landscape in the Southeastern US. However, its ecohydrological implications, particularly following conversion from grazed pastures, a dominant land use in the region, remain highly uncertain. We investigated the impact of cane expansion on evapotranspiration (ET) and its partitioning, and the mechanisms influencing both ET components and water use efficiency (WUE) across multiple scales and growth cycles in subtropical Florida. We combined eddy covariance, biometric measurements, and process-based stomatal conductance (g s ) models. ET was 1.7% lower in cane than in improved pasture (IMP) but exceeded that in semi-native pasture (SN) by 21%. Transpiration (T) followed a similar pattern, consistent with lower g s in cane relative to IMP. Cane had more conservative water use and greater sensitivity of g s to vapor pressure deficit (VPD) compared to IMP pasture, suggesting cane may be more tolerant of increasing atmospheric water demand. In contrast, SN showed lower g s and weaker stomatal sensitivity to VPD compared to cane, resulting in lower T. In cane, stomatal regulation and T varied across growth cycles, with stomata becoming less water conservative as stands matured, highlighting the importance of incorporating stand age-dependent stomatal regulation into hydrological models. Evaporation (E) was higher in cane than pastures (19%–26%), partially offsetting WUE gains. Cane exhibited higher intrinsic WUE (GPP/g s ; Gross Primary Productivity), ecosystem WUE (GPP/ET), and harvest WUE (harvest/ET) than both pasture types. Large-scale pasture-to-cane conversion could produce widely contrasting hydrological outcomes. The net regional impact will depend on the proportion of each pasture type converted and on cane's high g s sensitivity to VPD, which triggers tight stomatal regulation and conservative water use, both of which will become increasingly consequential under intensifying atmospheric water demand.

bioenergy↗
DOE OSTI2023

Exploring 3D leaf anatomical traits for C 4 photosynthesis: chloroplast and plasmodesmata pit field size in maize and sugarcane

Summary Volume and surface area of chloroplasts and surface area of plasmodesmata pit fields are presented for two C 4 species, maize and sugarcane, with respect to cell surface area and cell volume. Serial block face scanning electron microscopy (SBF‐SEM) and confocal laser scanning microscopy with the Airyscan system (LSM) were used. Chloroplast size estimates were much faster and easier using LSM than with SBF‐SEM; however, the results were more variable than SBF‐SEM. Mesophyll cells were lobed where chloroplasts were located, facilitating cell‐to‐cell connections while allowing for greater intercellular airspace exposure. Bundle sheath cells were cylindrical with chloroplasts arranged centrifugally. Chloroplasts occupied c. 30–50% of mesophyll cell volume, and 60–70% of bundle sheath cell volume. Roughly 2–3% of each cell surface area was covered by plasmodesmata pit fields for both bundle sheath and mesophyll cells. This work will aid future research to develop SBF‐SEM methodologies with the aim to better understand the effect of cell structure on C 4 photosynthesis.

3D leaf imaging↗
DOE OSTI2025

Brachypodium SPEECHLESS2 Promoter Drives Expression of a Synthetic EPF to Reduce Stomatal Density in Sugarcane Without Pleiotropic Effects

Stomata are microscopic pores that regulate the exchange of CO 2 and water vapour, making them a major target for engineering plants with improved intrinsic water use efficiency (iWUE). Proof-of-concept studies have demonstrated the potential to increase iWUE by reducing stomatal density (SD) and stomatal conductance (g sw ) by ubiquitously expressing EPIDERMAL PATTERNING FACTOR (EPF) family genes. However, unwanted effects on leaf, stem and reproductive traits are often observed when EPFs are misexpressed in this fashion. We sought to test if these effects result from pleiotropy and to identify a targeted promoter that can circumvent the side effects while retaining the desired reduction in SD. A previously reported synthetic EPF (EPF syn ) was expressed in sugarcane ( Saccharum spp.) using two putatively tissue-specific promoters from Brachypodium distachyon (BdCESA7p and BdSPCH2p) and a ubiquitous control from Zea mays (ZmUBI4p). BdSPCH2p control reduced SD to statistically equivalent levels as ZmUBI4p on the abaxial (23%) and adaxial (23%) leaf surfaces. ZmUB4p and BdCESA7p induce expression in four tissue types often associated with pleiotropic effects in EPF-expressing low SD plants. Transgenic plants carrying either the BdCESA7p or ZmUBI4p EPF syn cassettes displayed leaf chlorosis, reduced leaf nitrogen and chlorophyll content, and altered stem architecture. However, transgenic events harboring the BdSPCH2p EPF syn cassette restricted EPF syn expression to the stomatal development zone and leaf nodal tissues and produced transgenic plants without the associated pleiotropic effects. These results represent an important step toward engineering low-SD crops since they show that targeted gene expression can engineer stomatal patterning without impairing agronomically important traits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Data for Chemical-Free Production of Multiple High-Value Bioproducts from Metabolically Engineered Transgenic Sugarcane ‘Oilcane’ Bagasse and Their Recovery Using Nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value-added bioproducts. The study utilizes recently developed transgenic sugarcane (“oilcane”) bagasse for chemical-free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210 °C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF membrane rejected ∼99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ∼ 86% furfurals. The work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

Biomass Analytics↗
DOE OSTI2025

MAGs from alcoholic fermentation in sugarcane biorefineries

Genome-resolved metagenomics was applied to recover microbial metagenome-assembled genomes (MAGs) from alcoholic fermentation samples collected at two sugarcane biorefineries in São Paulo state, Brazil, during the 2024 harvest season.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Combined Sugarcane Pretreatment for the Generation of Ethanol and Value-Added Products

In this work, we have tested individual and combination of applications of ozonolysis and liquid hot water (LHW) to pretreat sugarcane bagasse (SCB) for the removal of enzyme and/or microbial inhibitors and generation of potential value-added chemicals. A solid content with 80% cellulose and a liquid phase (liquor) rich in phenolic derived compounds (3 g . L −1 ) from lignin, sugars (>20 g . L −1 ), and other compounds, such as furfural and hydroxymethylfurfural (HMF), were generated. Maximal (59%) glucan conversion occurred in the presence of double-pretreated bagasse, which had 32–50% more glucan available than the samples that were individually LHW or ozone-pretreated, resulting in maximal ethanol production (92% after 42 h) from double-pretreated SCB enzyme hydrolyzate. In summary, this work showed that ozone reacts effectively with lignin without the use of any other chemical reagent, and LHW pretreatment, followed by a washing step, was effective in solubilizing and cleaning up the fiber enzyme and microbial inhibitory compounds with ozone being effective against phenolics. Moreover, the generated cellulose-rich substrate is readily fermentable. The acidic liquor fraction removed by sequential washings and containing mainly sugars and phenolic compounds may be evaluated for use in green chemistry bioconversions processes.

09 BIOMASS FUELS↗
DOE OSTI2020

Biodiesel production from engineered sugarcane lipids under uncertain feedstock compositions: Process design and techno-economic analysis

In this study, different process schemes were designed and evaluated for biodiesel production from engineered cane lipids with uncertain fatty acid compositions. Four different process schemes were compared under (i) thermal glycerolysis and (ii) enzymatic glycerolysis approaches. These schemes were based on the biodiesel yield and economic indicators such as the net present value (NPV) and the minimum selling price (MSP) of biodiesel. A scheme with polar lipid separation under thermal glycerolysis resulted in the maximum NPV ($\$96.5$ million) and minimum MSP ($\$1107$ /ton biodiesel), respectively. Through local sensitivity analysis, it was concluded that the cane lipid percentage is the most significant factor influencing process economics. A conjoint analysis of the lipid procurement price and cane lipid percent suggested that 15% cane lipids with a low lipid procurement price ($\$0.536$ /kg) results in a positive NPV. When the cane lipid price is higher (> $\$0.80$ /kg), a 20% lipid content should be considered to achieve a positive NPV. At 20% cane lipids, the worst-case and best-case scenarios were evaluated by analyzing the interplay of the three most important parameters, Here, the best-case scenario revealed that the minimum NPV under any process scheme could yield more than $\$100$ million (or MSP: $\$0.80$ /L), and the worst-case analysis showed that losses incurred by the plant could be as high as 80 million (MSP: $\$1.36$ /L). A Monte Carlo simulation indicated that there is a 70% chance of the plant being profitable (NPV > 0).

09 BIOMASS FUELS↗
DOE OSTI2024

Double in-situ lignin modification in surfactant-assisted glycerol organosolv pretreatment of sugarcane bagasse towards efficient enzymatic hydrolysis

Organosolv pretreatment effectively fractionates lignocellulosic biomass for efficient enzymatic hydrolysis, yielding fermentable sugars. However, substantial lignin redeposition on the substrate surface and residual lignin content exacerbate lignin’s inhibitory effects on subsequent enzymatic hydrolysis. Here, an in-situ lignin modification is proposed to address this challenge by incorporating polyethylene glycol (PEG) series into glycerol organosolv (GO) pretreatment. According to the results obtained, PEG-assisted GO pretreated substrate exhibited significantly increased sugar yield during enzymatic hydrolysis, particularly with PEG 4000, showing 35.4% higher glucose yield over 72 h. The improved glucose yield with PEG could be attributed to changes in the physicochemical structure and properties of residual lignin, mitigating its non-productive interaction with cellulase enzymes. PEG's presence in GO pretreatment also increased β-O-4 linkages preservation by 55% and reduced phenolic hydroxyl groups by 28% in lignin fragments versus no surfactants. This outcome resulted from introducing glycerol and PEG hydroxyl tails into the lignin structure, forming α-etherified lignin and rendering it more hydrophilic. Simulations confirmed strong Van Der Waals and hydrogen bonding interactions between lignin units and PEG, hindering lignin fragments repolymerization. Incorporating PEG in the organosolv pretreatment proves highly beneficial for cellulase-mediated lignocellulosic biorefinery, resembling a lignin-first strategy. The optimized process enables efficient biomass utilization for sustainable fuels and chemicals production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparing first- and second-generation bioethanol by-products from sugarcane: Impact on soil carbon and nitrogen dynamics

The first- and second-generation bioethanol by-products (bagasse and fermentation by-product, respectively) have different biochemical characteristics relating to carbon (C) and nitrogen (N) due to their production processes. To examine the impacts of fermentation by-product and bagasse on soil C and N dynamics, a 120 day laboratory incubation experiment was conducted by applying these amendments in soil at an equal carbon application rate (2.2 g C kg -1 soil). There was a significant increase in overall cumulative CO 2 -C production from amended soil compared to the control soil, though the loss was greatest in bagasse amended soil. However, δ13C-CO 2 measurements suggested that fermentation by-product addition suppressed native soil C mineralization and prompted strong negative C priming (-57%). In contrast, bagasse amendment maintained similar native soil C mineralization to control soil. Decreased microbial biomass turnover time appears to be the major driving force for increased CO 2 -C production and soil C loss following bioethanol by-product amendments. Increased mineral N production indicated net N mineralization after fermentation by-product addition, while addition of bagasse resulted in lower N availability and N immobilization. Overall, results suggested that fermentation by-product application is advantageous in maintaining native soil C stock and N mineralization compared to bagasse. Thus, in a sustainable second-generation bioethanol production system, bagasse may be used for second-generation bioethanol production and the cogenerated by-product could be used as an amendment to improve soil C stock and N availability.

09 BIOMASS FUELS↗
DOE OSTI2020

Data from Biodiesel Production from Engineered Sugarcane Lipids under Uncertain Feedstock Compositions: Process Design and Techno-Economic Analysis

In this study, different process schemes were designed and evaluated for biodiesel production from engineered cane lipids with uncertain fatty acid compositions. Four different process schemes were compared under (i) thermal glycerolysis and (ii) enzymatic glycerolysis approaches. These schemes were based on the biodiesel yield and economic indicators such as the net present value (NPV) and the minimum selling price (MSP) of biodiesel. A scheme with polar lipid separation under thermal glycerolysis resulted in the maximum NPV ($96.5 million) and minimum MSP ($1107/ton biodiesel), respectively. Through local sensitivity analysis, it was concluded that the cane lipid percentage is the most significant factor influencing process economics. A conjoint analysis of the lipid procurement price and cane lipid percent suggested that 15% cane lipids with a low lipid procurement price ($0.536/kg) results in a positive NPV. When the cane lipid price is higher (>$0.80/kg), a 20% lipid content should be considered to achieve a positive NPV. At 20% cane lipids, the worst-case and best-case scenarios were evaluated by analyzing the interplay of the three most important parameters, The best-case scenario revealed that the minimum NPV under any process scheme could yield more than $100 million (or MSP: $0.80/L), and the worst-case analysis showed that losses incurred by the plant could be as high as $80 million (MSP: $1.36/L). A Monte Carlo simulation indicated that there is a 70% chance of the plant being profitable (NPV > 0).

Conversion↗