Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Atomic-Scale Visualization of Surface Segregation and Ordering of Pt in a Dilute Cu(Pt) Alloy under a Hydrogen Atmosphere

Surface segregation is a common phenomenon in alloys exposed to reactive atmospheres, yet the atomic mechanisms underlying surface structure and composition dynamics remain largely unexplored. Using a combination of environmental transmission electron microscopy observations and atomistic modeling, here we report the surface segregation process of Pt atoms in a dilute Pt(Cu) alloy and determine the distribution of Pt atoms at both atomically flat and stepped surfaces of the Pt(Cu) alloy at elevated temperatures and in a hydrogen gas atmosphere. Through directly probing Pt segregation, we find that Pt atoms segregated on the (100) surface exhibit a p(2 × 2) ordering, with ~25% Pt occupancy. In contrast, on the stepped (410) surface, hydrogen adsorption induces Pt segregation, initially occurring at the step edges, which then expands to the terrace sites upon increased hydrogen coverage, resulting in an ordered distribution of segregated Pt atoms with ~22% occupancy. Finally, these observations offer mechanistic insights into the structure and composition dynamics of the topmost atomic layer of the alloy in response to environmental stimuli and hold practical implications for the design and optimization of catalysts based on Pt group metals.

36 MATERIALS SCIENCE↗

Two-step growth of high quality Bi{sub 2}Te{sub 3} thin films on Al{sub 2}O{sub 3} (0001) by molecular beam epitaxy

Large-area topological insulator Bi{sub 2}Te{sub 3} thin films were grown on Al{sub 2}O{sub 3} (0001) using a two-temperature step molecular beam epitaxy growth process. By depositing a low temperature nucleation layer to serve as a template for high temperature epitaxial film growth, a high quality terrace-step surface morphology with a significant reduction in three-dimensional defect structures was achieved. X-ray diffraction measurements indicate that high crystalline quality Bi{sub 2}Te{sub 3} layers were grown incoherently by van der Waals epitaxy using this technique. Angle resolved photoemission spectroscopy measurements verified the integrity of this growth method by confirming the presence of metallic surface states on cleaved two-step Bi{sub 2}Te{sub 3} samples.

36 MATERIALS SCIENCE↗

Polarization dependent formation of femtosecond laser-induced periodic surface structures near stepped features

Laser-induced periodic surface structures (LIPSS) are formed near 110 nm-tall Au microstructured edges on Si substrates after single-pulse femtosecond irradiation with a 150 fs pulse centered near a 780 nm wavelength. We investigate the contributions of Fresnel diffraction from step-edges and surface plasmon polariton (SPP) excitation to LIPSS formation on Au and Si surfaces. For certain laser polarization vector orientations, LIPSS formation is dominated by SPP excitation; however, when SPP excitation is minimized, Fresnel diffraction dominates. The LIPSS orientation and period distributions are shown to depend on which mechanism is activated. These results support previous observations of the laser polarization vector influencing LIPSS formation on bulk surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of substrate misorientation on the optical properties of Mg-doped GaN

The GaN substrate miscut angle has a significant effect on the optical properties of Mg-doped GaN grown by metal-organic chemical vapor deposition. We have studied the optical properties of epilayers grown on c-plane GaN wafers with nominal miscut angles of 0.3° and 4° toward the [11¯00] direction. Periodic surface steps are observed in thin films grown on 0.3° miscut substrates. The step separation and height, as well as the surface roughness, increase with layer thickness, leading to a decrease in Mg doping efficiency. For films grown on 4° miscut substrates, step bunching causes the formation of visually observable wavy features on the film surface with strong spatial variations in cathodoluminescence characteristics, indicating a significant effect of surface morphology on the nature of Mg incorporation and p-type characteristics.

Liu, Hanxiao (ORCID:0000000331067542)↗

Microstructure of room temperature ionic liquids at stepped graphite electrodes

Molecular dynamics simulations of room temperature ionic liquid (RTIL) [emim][TFSI] at stepped graphite electrodes were performed to investigate the influence of the thickness of the electrode surface step on the microstructure of interfacial RTILs. A strong correlation was observed between the interfacial RTIL structure and the step thickness in electrode surface as well as the ion size. Specifically, when the step thickness is commensurate with ion size, the interfacial layering of cation/anion is more evident; whereas, the layering tends to be less defined when the step thickness is close to the half of ion size. Furthermore, two-dimensional microstructure of ion layers exhibits different patterns and alignments of counter-ion/co-ion lattice at neutral and charged electrodes. As the cation/anion layering could impose considerable effects on ion diffusion, the detailed information of interfacial RTILs at stepped graphite presented here would help to understand the molecular mechanism of RTIL-electrode interfaces in supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth mechanism and surface atomic structure of AgInSe{sub 2}

The growth of (112)A-oriented AgInSe{sub 2} on GaAs (111)A and its surface reconstruction were studied by scanning tunneling microscopy, atomic force microscopy, and other techniques. Films were grown by a sputtering and evaporation method. Topographic STM images reveal that the film grew by atomic incorporation into surface steps resulting from screw dislocations on the surface. The screw dislocation density was {approx}10{sup 10} cm{sup 2}. Atomically resolved images also show that the surface atomic arrangement appears to be similar to that of the bulk, with a spacing of 0.35-0.41 nm. There is no observable reconstruction, which is unexpected for a polar semiconductor surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalytic resonance theory for the kinetic signatures of multiple wavelength photocatalysis

Multi-step surface chemistry promoted with one or two wavelengths of light exhibited distinct kinetic signatures indicative of the light-adsorbate interactions and the number of photon-sensitive elementary steps. In this work, kinetic Monte Carlo simulations identified the kinetic response of general surface mechanisms to variation in the per-site photon flux of one or two wavelengths of incident light. Photocatalytic rates were described via a non-dimensional photon flux, identifying multiple kinetic regimes with unique degrees of rate control. Under photon-controlled kinetic conditions, maximum quantum yield and turnover frequency were obtained under constant illumination, while pulsing of one or more light sources was shown to exhibit slower rates and less efficient photocatalytic promotion due to the inherent dynamic nature of light, which comprises a stream of photons. Simulations provided distinct kinetic signatures in catalytic rates and Arrhenius kinetics for specific light-surface-adsorbate interactions corresponding to photocatalytic promotion of specific steps in surface chemistry.

catalytic resonance↗

Excitonic mechanism of the photoinduced surface restructuring of copper

An explanation for the photoinduced reconstruction of Cu single-crystal surfaces that was observed by Ernst et al. [Science 279, 679 (1998)] under the influence of visible light is proposed. It is suggested that reconstruction can be attributed to the energy released during the nonradiative decay of excitons that were excited by light irradiation and captured on surface active centers. The estimates performed show that exciton decay on surface steps and adatoms releases enough energy to create surface defects.

36 MATERIALS SCIENCE↗

Chapter 2 Anion Sorption Topology on Hematite: Comparison of Arsenate and Silicate

Arsenate and silicate are tetrahedral anions that strongly sorb to positive Fe oxide surfaces over the pH range 2-7. Both are important agents for modification of Fe oxide surface reactivity, and notably passivate against other sorption reactions. Arsenate is a significant health hazard as a sorbed pollutant associated with acid mine drainage, while silicate is a common anion in natural solutions. Our aim is to understand the types of sorption complexes that form with these anions on different crystal faces, and whether polymerization occurs with the silicate units. Silicate polymerization could dramatically alter Fe oxide surface reactivity. The structural characterization is conducted using both grazing incidence extended X-ray absorption fine structure (GIEXAFS) at Stanford Synchrotron Radiation Laboratory [SSRL] and the National Synchrotron Light Source (NSLS), and surface diffraction (using crystal truncation rod (CTR) analysis) at the Advanced Photon Source (APS). GIEXAFS yields interatomic distances from arsenic and silicon to their oxygen first neighbor shell and second Fe or other next neighbor shell, and thus allows identification of the local geometry of sorption. Polarized X-ray fine structure spectroscopy further allows determination of the orientation and density of the complexes on the various Fe surface planes. However, this information is incomplete as any response of the surface to sorption is not revealed, and hydrogen bonding and water molecule arrangement at the surface can be changed due to the sorption process. To access these we use CTR experiments and compare the results with samples without sorbed anions. GIEXAFS results for both hematite (0 0 0 1) and (1{bar 1}02) planes show arsenate sorbed in two ways: bidentate binuclear and bidentate mononuclear. Most of the latter type of sorption geometry appears to be present on surface step edges on the (1{bar 1}02) surface, while there is little or no such attachment to the (1{bar 1}02) surface terraces. These results appear consistent with preliminary structural models obtained by CTR work for the clean and sorbed wet hematite surfaces, and further analysis is in progress. In the case of silicate, strong changes in the CTR are observed indicating considerable surface interactions. CTR measurements of the silicate on the (1{bar 1}02) surface of hematite suggest that a monodentate sorption geometry is more dominant than other possible sorption geometries. However GIEXAFS analysis done on analogous samples at the Si K-edge shows second shell contributions that are similar to amorphous silica, and are largely independent of sorption density. These results suggest that there are at least two kinds of silicate on the hematite surface: a chemically bound fraction present as a silicate-Fe{sup 3+} octahedral complex, and an incoherent portion which is not detectable by the CTR measurements but appears to dominate the GIEXAFS results. The complexed silicate on the hematite (1{bar 1}02) surface is linked by a single oxygen to surface Fe, i.e., a monodentate connection, with an interatomic Si-Fe distance close to those observed in the nontronite and acmite structures. This is the first evidence to our knowledge that identifies silicate as a well-defined sorption complex rather than only as an amorphous surface precipitate. More significantly, the monodentate complex is apparently favored over a more strongly bound bidentate complexation geometry, suggesting that polymerization at the interface may originate synchronously with sorption and be mitigated by the position of surface sites consistent with a polymerized network. These findings have important significance for the nature of passivation processes on Fe oxides and other important reactive natural surfaces.

08 HYDROGEN↗

Effect of a Stepped Si(100) Surface on the Nucleation Process of Ge Islands

Nucleation of Ge islands on a stepped Si(100) surface is studied. It is shown by diffraction of fast electrons that at a temperature of 600°C, constant flux of Si, and deposition rate of 0.652 Å/s, a series of the 1×2 superstructure reflections completely disappears, if the Si (100) substrate deviated by an angle of 0.35° to the (111) face is preliminarily heated to 1000°C. The disappearance of the 1×2 superstructure reflexes is due to the transition from the surface with monoatomic steps to that with diatomic ones. Investigations of the Ge islands’ growth were carried out on the Si(100) surface preliminarily annealed at temperatures of 800 and 1000°C. It is shown that the islands tend to nucleate at the step edges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of the oxygen reduction reaction for dense LSM thin films

In this study, the oxygen reduction reaction mechanism is investigated using numerical methods on a dense thin (La 1-x Sr x ) y MnO 3±δ film deposited on a YSZ substrate. This 1-D continuum model consists of defect chemistry and elementary oxygen reduction reaction steps coupled via reaction rates. The defect chemistry model contains eight species including cation vacancies on the A- and B-sites. The oxygen vacancy is calculated by solving species transportation equations in multiphysics simulations. Due to the simple geometry of a dense thin film, the oxygen reduction reaction was reduced to three elementary steps: surface adsorption and dissociation, incorporation on the surface, and charge transfer across the LSM/YSZ interface. The numerical simulations allow for calculation of the temperature- and oxygen partial pressure-dependent properties of LSM. The parameters of the model are calibrated with experimental impedance data for various oxygen partial pressures at different temperatures. The results indicate that surface adsorption and dissociation is the rate-determining step in the ORR of LSM thin films. With the fine-tuned parameters, further quantitative analysis is performed. The activation energy of the oxygen exchange reaction and the dependence of oxygen non-stoichiometry on oxygen partial pressure are also calculated and verified using the literature results.

36 MATERIALS SCIENCE↗

The influence of laser-induced nanosecond rise-time stress waves on the microstructure and surface chemical activity of single crystal Cu nanopillars

An apparatus and test procedure for fabrication and loading of single crystal metal nanopillars under extremely high pressures (>1 GPa) and strain rates (>10{sup 7} s{sup -1}), using laser-generated stress waves, are presented. Single-crystalline Cu pillars ({approx}1.20 {mu}m in tall and {approx}0.45 {mu}m in diameter) prepared via focused ion beam milling of Cu(001) substrates are shock-loaded using this approach with the dilatational stress waves propagating along the [001] axis of the pillars. Transmission electron microscopy observations of shock-loaded pillars show that dislocation density decreases and that their orientation changes with increasing stress wave amplitude, indicative of dislocation motion. The shock-loaded pillars exhibit enhanced chemical reactivity when submerged in oil and isopropyl alcohol solutions, due likely to the exposure of clean surfaces via surface spallation and formation of surface steps and nanoscale facets through dislocation motion to the surface of the pillars, resulting in growth of thin oxide films on the surfaces of the pillars.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial Ordering and Anisotropy in Surface Stress Domains and Nanostructural Evolution

The role of elastic interaction has been well recognized for various growth modes and nanostructural self-organization on solid surfaces. Examples include spontaneous formation of stress domains in reconstructed surfaces or in phase-separating monolayers, meandering and bunching of surface steps, quantum dot formation in heteroepitaxial thin film growth, and surface roughness evolution of a stressed solid during chemical etching. The long range spatial ordering in these strain-mediated nanostructural evolution phenomena on solid surfaces is critically dependent on the anisotropy. A universal formulation is developed to examine the energetically favored orientation with respect to parameters that represent the anisotropy in elasticity and applied stress (or lattice misfit, surface stress, etc.). Nonlinear effects in surface roughness evolution are also discussed.

36 MATERIALS SCIENCE↗

Selectivity of Synthesis Gas Conversion to C 2+ Oxygenates on fcc(111) Transition-Metal Surfaces

Using a combined density functional theory and descriptor based microkinetic model approach, we predict production rate volcanos for higher oxygenate formation on (111) transition-metal surfaces. Despite their lower activity for CO conversion compared to stepped surfaces, (111) transition metal surfaces bring the potential for selectivity toward C 2+ oxygenates. As a result, the volcano plots can be used to rationalize and predict activity and selectivity trends for transition-metal-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anti-phase boundaries at the SrTiO{sub 3}/Si(001) interface studied using aberration-corrected scanning transmission electron microscopy

In this work, the atomic structure of anti-phase boundary defects at the SrTiO{sub 3}/Si (001) interface is investigated by aberration-corrected scanning transmission electron microscopy. Atomic-resolution images reveal an abrupt SrTiO{sub 3}/Si interface with no intermediate oxide layer. Both single and double Si atomic columns (“dumbbells”) from different terraces of the Si(001) surface are visible at the interface. Anti-phase boundaries (APB) consisting of two adjacent TiO{sub 2} planes in the SrTiO{sub 3} (STO) film resulting either from Si surface steps or from the merging of crystalline domains from different surface nucleation sites are identified. These APBs occur on either {110} or {010} planes and both types have displacement vectors of a{sub STO}/2〈110〉.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO 2 . The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO 2 gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO 2 and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO 2 does not require them to be defect-free, but solely continuous and overlapping growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimethyl ether electro-oxidation on platinum surfaces

A first-principles density functional theory study was performed in this paper to elucidate the mechanism of dimethyl ether electro-oxidation on three low-index platinum surfaces (Pt(111), Pt(100), and Pt(211)). The goal of this study is to provide a fundamental explanation for the high activity observed experimentally on Pt(100) compared to Pt(111) and stepped surfaces. We determine that the enhanced activity of Pt(100) stems from more facile C–O bond breaking kinetics, as well as from easier removal of CO as a surface poison through activation of water. In general, the C–O bond (in CH x OCH y ) becomes easier to break as dimethyl ether is dehydrogenated to a greater extent. In contrast, dehydrogenation becomes more difficult as more hydrogen atoms are removed. We perform two analyses of probable reaction pathways, which both identify CHOC and CO as the key reaction intermediates on these Pt surfaces. We show that the reaction mechanism on each surface is dependent on the cell operating potential, as increasing the potential facilitates C–H bond scission, in turn promoting the formation of intermediates for which C–O scission is more facile. We additionally demonstrate that CO oxidation determines the high overpotential required for electro-oxidation on Pt surfaces. Finally, at practical operating potentials (~0.60 V RHE ), we determine that C–O bond breaking is most likely the most difficult step on all three Pt surfaces studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio study of the adsorption, diffusion, and intercalation of alkali metal atoms on the (0001) surface of the topological insulator Bi{sub 2}Se{sub 3}

Ab initio study of the adsorption, diffusion, and intercalation of alkali metal adatoms on the (0001) step surface of the topological insulator Bi{sub 2}Se{sub 3} has been performed for the case of low coverage. The calculations of the activation energies of diffusion of adatoms on the surface and in van der Waals gaps near steps, as well as the estimate of diffusion lengths, have shown that efficient intercalation through steps is possible only for Li and Na. Data obtained for K, Rb, and Cs atoms indicate that their thermal desorption at high temperatures can occur before intercalation. The results have been discussed in the context of existing experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗