Search NASA⌕ Search

SEARCH · Search NASA

Results for “tearing modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Role of edge-localized neoclassical tearing modes in quiescent H-mode plasmas in the DIII-D tokamak

The edge-harmonic oscillations (EHOs) in standard quiescent H-mode (QH-mode) plasmas in DIII-D are consistent with edge-localized neoclassical tearing modes (NTMs) based on nonlinear two-fluid MHD simulations. Using kinetic equilibria constrained by edge profile measurements, the MHD simulations show that the n = 1 NTM and its harmonics can be destabilized at the pedestal top of QH-mode plasma by the edge bootstrap current. The simulations further show that the unstable NTMs can saturate either at small (<2% ψ N ) or large (>4% ψ N ) island width depending on the magnitude of the edge bootstrap current, where ψ N is the normalized radius in poloidal flux. The onset of the EHO also results in a prompt decrease in the pedestal width and height, consistent with simulation results for the onset of the NTM at the top of the QH-mode pedestal. This suggests that the avoidance of edge-localized modes (ELMs) in QH-mode can be attributed to the enhanced local transport induced by the NTM that is sufficient to prevent the expansion of the pedestal to an unstable width, analogous to the mechanism explored for ELM suppression by resonant magnetic perturbations. Nonlinear MHD simulations scanning the E × B frequency and the ratio of parallel and perpendicular thermal diffusivity (χ | /χ ⊥ ) at the pedestal top show that edge-localized NTMs are destabilized for conditions of high E × B frequency, high pedestal temperature, and low pedestal density, qualitatively consistent with experimental conditions required for observing the EHO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Interpreting AI for fusion: An application to plasma profile analysis for tearing mode stability

Artificial intelligence models have demonstrated strong predictive capabilities for various instabilities in fusion devices such as Tokamaks, including tearing modes (TM), edge localized modes, and disruptive events, but their opaque nature raises concerns about safety and trustworthiness when applied to fusion power plants. Here, we present a physics-based interpretation framework using a TM prediction model as a demonstration that is validated through a dedicated DIII-D TM avoidance experiment. By applying Shapley analysis, we identify how profiles such as rotation, temperature, and density contribute to the model's prediction of TM stability. Our analysis shows that in our experimental scenario, core electron temperature and rotation peaking play the primary role in TM stability, while density changes have smaller effects on stability. We show that off-axis ion temperature stabilizes TMs, suggesting that off-axis neutral beam heating can further stabilize this scenario. This work presents a generalizable ML-based event prediction methodology, from training to physics-driven interpretation, bridging the gap between physics understanding and opaque ML models.

Farre-Kaga, Hiro J. [Princeton Univ., NJ (United S↗
DOE OSTI2022

Disruptive neoclassical tearing mode seeding in DIII-D with implications for ITER

New studies identify the critical parameters and physics governing disruptive neoclassical tearing mode (NTM) onset. An m/n = 2/1 mode in DIII-D that begins to grow robustly after a seeding event (edge localized mode ELM or sawtooth precursor and crash) causes the mode rotation to drop close to the plasma's Er = 0 rest frame; this condition opens the stabilizing ion-polarization current 'gate' and destabilizes an otherwise marginally stable NTM. Our new experimental and theoretical insights and novel toroidal theory-based modeling are benchmarked and scalable to ITER and other future experiments. Here, the nominal ITER rotation at q = 2 is found to be stabilizing ('gate closed') except for MHD-induced transients that could 'open the gate'. Extrapolating from the DIII-D ITER baseline scenario (IBS) discharges, MHD transients are much more likely to destabilize problematic robustly growing 2/1 NTMs in ITER; this makes predictions of seeding and control of both ELMs and sawteeth imperative for more than just minimizing divertor pulsed-heat loading.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Toroidal modeling of energetic passing particle drift kinetic effects on tearing mode stability

Abstract Drift kinetic effects of the neutral beam injection induced passing energetic particles (EPs) on the linear stability of the n = 1 tearing mode (TM) (with the dominant poloidal harmonic of m = 2) are numerically investigated utilizing the MARS-K code (Liu et al 2008 Phys. Plasmas 15 112503), in a tokamak plasma with finite equilibrium pressure and anisotropic thermal transport. In the low plasma pressure regime, it is found that co- (counter-) passing EPs stabilize (destabilize) the TM, agreeing with previous studies. However, as the plasma pressure increases beyond a critical value, it is found that co-passing EPs also destabilize the mode. An in-depth analysis reveals that the net effect of co-passing EPs is a result of competition between the stabilizing contribution from the non-adiabatic drift kinetic terms and the destabilizing contribution associated with adiabatic terms, with the latter becoming more dominant at higher equilibrium pressure. Non-perturbative magnetohydrodynamic-kinetic hybrid modeling also finds that co- and counter-passing EPs modify the TM eigenfunction differently, with the counter-passing EPs enhancing the sideband harmonics. Furthermore, effects of the plasma resistivity and toroidal rotation, as well as that of the equilibrium distribution of EPs in the particle pitch angle space, are also investigated, showing asymmetric results on the TM stability between the co- and counter-passing EPs. The first order finite orbit width correction is found to be stabilizing with co-passing EPs and destabilizing with counter-passing particles. Finally, drift resonances between passing EPs and the TM induce finite frequency to the mode and generate finite net torques inside the plasma, due to the neoclassical toroidal viscosity and the Reynolds stress associated with 3D perturbations.

Physics↗
DOE OSTI2023

Direct preemptive stabilization of $m,n$ = 2,1 neoclassical tearing modes by electron cyclotron current drive in the DIII-D low-torque ITER baseline scenario

We report the first preemptive direct stabilization of $m,n$ = 2,1 neoclassical tearing modes (NTMs) in DIII-D low-torque ITER baseline scenario plasmas by electron cyclotron waves. These experiments strongly support that the observed stabilization is achieved by replacing the missing bootstrap current in the island by electron cyclotron current drive (ECCD). These plasmas (with and without ECCD) are stable to 2,1 NTMs when the differential rotation between the q = 1 and q = 2 surfaces (Δf 1,2 ) is sustained above a critical value (Δf CRIT ≈ 1 kHz), but those evolving to low differential rotation (Δf 1,2 < Δf CRIT ) routinely develop a disruptive 2,1 island at the time and frequency of a sawtooth precursor. Preemptive, local and direct stabilization by ECCD is tested by scanning the current drive amplitude and location inside and outside of the q = 2 rational surface shot by shot. Analysis of only low differential rotation time windows, i.e. when stabilization from Δf 1,2 is absent, shows focused ECCD at q = 2 prevents the onset of 2,1 NTMs. These results are important, as they give the first demonstration of disruptive NTM control by ECCD in the plasma scenario planned for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Numerical investigation of alpha particle confinement under the perturbation of neoclassical tearing modes and toroidal field ripple in CFETR

The confinement of alpha particles in burning plasma is a key issue in fusion reactor design, including particle interaction with instabilities. Here, we include two topics: the effect of neoclassical tearing modes (NTMs) and toroidal field ripple on alpha particle loss, and the assessment of particle redistribution under an NTM with a reduced model. We consider Chinese fusion engineering test reactor parameters, the alpha particle distribution given by TRANSP/NUBEAM and the NTM perturbation function given by the initial value code TM1. We show that the synergistic effect of the NTM and ripple is negligible; the particle loss fraction does not change with increasing NTM amplitude. Only passing particles are affected by the mode particle resonance, producing profile flattening but no increased loss because only trapped particles are influenced by ripple. To study alpha particle profile flattening, the work adopts an innovative method of phase vector rotation to determine regions of good and broken Kolmogorov–Arnold–Moser surfaces and equilibrates the particle density according to local stochasticity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Influence of anomalous perpendicular transport on linear tearing mode dynamics in tokamak plasmas

The analysis of a previous paper [A. Cole and R. Fitzpatrick, Phys. Plasmas 13, 032503 (2006)] that maps out all of the two-fluid response regimes of a linear tearing layer interacting with an externally generated resonant magnetic perturbation, in a large aspect-ratio tokamak plasma, is generalized to take into account realistic levels of perpendicular particle transport. A new response-regime map is obtained that differs substantially, in many respects, from the old one. The improved analysis is first employed to find all of the two-fluid growth-rate regimes of a non-interacting low-mode-number tearing mode in a large aspect-ratio tokamak plasma. The analysis is then used to determine the scaling of the error-field penetration threshold with machine parameters in large aspect-ratio tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Neoclassical Tearing Mode Seeding by Nonlinear Three-Wave Interactions in Tokamaks

We report the experimental observation of seed magnetic island formation by nonlinear three-wave coupling of magnetic island triplets. In this experiment, disruptive 2,1 islands are seeded by the coupling of 4,3 and 3,2 tearing modes to a central 1,1 sawtooth precursor. Three-wave interactions between these modes are conclusively identified by bispectral analysis, indicating fixed phase relationships in agreement with theory. Furthermore, this new observation of this seeding mechanism has important implications for future reactors that must operate in stable plasma equilibria, free of disruptive 2,1 islands.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modelling and experiment to stabilize disruptive tearing modes in the ITER baseline scenario in DIII-D

Abstract The achievement of high gain, stationary conditions in a tokamak scenario aimed at producing fusion energy in the ITER Project is crucial to the demonstration that this form of energy can be used in future reactors to provide cheap and clean energy globally. Disruptions are a challenge for the fusion energy field, in particular for the ‘ITER Baseline Scenario’ (IBS), as reproduced in the DIII-D tokamak. This work shows that a solution has been found for the m = 2/ n = 1 tearing modes that have consistently caused disruptions in the IBS: stable operation down to zero input torque was achieved by modifying the current density profile at the beginning of the pressure flattop and the ELM character later in the discharges, guided by previous results showing that the most likely cause of these instabilities is the current density profile. The coupling between sawteeth, n>2 modes and the 2/1 TMs is shown to not be statistically significant, nor the leading origin for the evolution towards instability. Ideal and resistive MHD modeling provide positive verification that a steeper ‘well’ in the region of the q = 2 rational surface leads to worse ideal stability, higher tearing index Δ’ and lower threshold Δ’ c for resistive instabilities, consistent with the experimental results. This provides confidence that the methods used in this work can be extrapolated to other devices and applied to avoid disruptions in ITER and pulsed fusion devices worldwide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

MST resistive wall tearing mode simulations

Here, the Madison Symmetric Torus (MST) is a toroidal device that, when operated as a stan dard tokamak, does not have major disruptions. Unlike most tokamaks, the MST plasma is surrounded by a close fitting highly conducting wall, with a resistive wall penetration time two orders of magnitude longer than in JET or DIII-D, and three times longer than in ITER. The MST can operate with edge q a &LessSlantEqual; 2, unlike standard tokamaks. Simulations presented here indicate that the MST is unstable to resistive wall tearing modes (RWTMs) and resistive wall modes (RWMs). They could in principle cause disruptions, but the predicted thermal quench time is much longer than the experimental pulse time. If the MST thermal quench time were comparable to measurements in JET and DIII-D, theory and simulations predict that disruptions would have been observed in MST. This is consistent with the modeling herein, predicting that disruptions are caused by RWTMs and RWMs. In the low q a ~ 2 regime of MST, the RWTM asymptotically satisfies the RWM dispersion relation. The transition from RWTM to RWM occurs smoothly at q a = m/n, where m, n are poloidal and toroidal mode numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Integrated control of individual plasma scalars with simultaneous neoclassical tearing-mode suppression

A novel integrated-control architecture has been tested in nonlinear, one-dimensional simulations using the control-oriented transport simulator (COTSIM©) and in DIII-D experiments. Integrated architectures that can perform continuous-mission control while also handling off-normal events will be vital in future reactor-grade tokamaks. Continuous-mission controllers for individual magnetic and kinetic scalars (thermal stored-energy (W), volume-average toroidal rotation (Ω Φ ), and safety factor profile (q) at different spatial locations) have been integrated in this work with event-triggered neoclassical tearing-mode (NTM) suppression controllers by combining them into an architecture augmented by a supervisory and exception handling (S&EH) system and an actuator management (AM) system. Here, the AM system, which enables the integration of competing controllers, solves in real time a nonlinear optimization problem that takes into account the high-level control priorities dictated by the S&EH system. The resulting architecture offers a high level of integration and some of the functionalities that will be required to fulfill the advanced-control requirements anticipated for ITER. Initial simulations using COTSIM suggest that the plasma performance and its MHD stability may be improved under integrated feedback control. In addition, the integrated-control architecture has been implemented in the DIII-D plasma control system and tested experimentally for the first time ever in DIII-D in a high-q min scenario, which is a candidate for steady-state operation in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Simulation of MHD instabilities with fluid runaway electron model in M3D- C 1

Runaway electrons are generated in a tokamak during the start up, during normal operation and during a plasma disruption. During a disruption, runaway electrons can be accelerated to high energies, potentially damaging the first wall. To predict the consequences of runaway generation during a disruption, it is necessary to consider resonant interactions of runaways with the bulk plasma. Here we consider the interactions of runaways on low mode number tearing modes. We have developed a fluid runaway electron model for the 3D MHD code M3D-C1[Jardin,et al. J Comput. Sci Discovery 6 014002 (2012)]. To benchmark, we have reproduced the MHD linear tearing mode results (with runaway electrons) in a circular cylinder presented in previous analytic studies[[Helander, P., et al, Phys. Plasmas 14 144102 (2007)] and extended here with a numerical eigenvalue calculation. Furthermore, we find that the low mode number tearing mode has a rotation caused by the MHD - runaways interaction, and the toroidal current scale length is much smaller with runaways than that for without and decreases as the runaway speed increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Tech-X contributions to the Center for Tokamak Transients (CTTS) Scientific Discovery through Advanced Computing (SciDAC) project (Final Report)

The Center for Tokamak Transients Simulations (CTTS) consists of computational plasma physicists, computer scientists, and applied mathematicians who are together developing and applying simulation software to improve our understanding of and ability to predict and control transient events in tokamak discharges, particularly those that lead to violent disruptions. We have major simulation activities concerning disruptions that are caused by violating ideal MHD stability criteria, vertical displacement events, resistive wall modes, and tearing modes. We are performing comprehensive modeling of disruption mitigation techniques, particularly by shattered pellet injection (SPI). The Center is built around two mature extended MHD codes: NIMROD and M3D-C1. These codes are being extended in a number of ways as required by the demands of disruption modeling, and are being optimized to work well for larger problem size and modern computer architectures as required to model tokamak plasmas with realistic parameters over the required timescales. The codes will be coupled to the FronTier code for state-of-the-art modeling of SPI. Validation with experimental data on DIII-D, NSTX, and JET is being facilitated by rigorous uncertainty quantification (UQ). The high-level objectives of the center are to: (1) Develop better understanding and improved predictive capability of when crossing a linear stability boundary will likely lead to a disruption, (2) Provide a tool for calculating vessel forces, both axisymmetric and non-axisymmetric, for worst case VDE and other disruptions in tokamaks, (3) Develop increased understanding and improved predictive capability for locked mode disruptions and how best to avoid them, (4) Develop, verify, and validate 3D models for disruption mitigation by shattered pellets that can be used to design and optimize a system for future tokamaks, and (5) Increase the efficiency and scalability of the M3D-C1 and NIMROD codes so that they can model disruptions in ITER scale devices using the most powerful DOE HPC hardware, and (6) Demonstrate code-coupling via FronTier coupling with NIMROD and M3D-C1 and by interfacing these codes within a WDM framework.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Evidence of nonlinear coupling in the edge harmonic oscillation sustaining quiescent high confinement in a tokamak plasma

In a tokamak plasma, we measure nonlinear coupling between harmonics comprising a saturated edge oscillation, as predicted by nonlinear magnetohydrodynamic simulations. The coherent structure formed by this coupling suppresses bursty edge-localized modes that cause energy and particle loss. We also measure nonlinear coupling of the edge harmonic oscillation to core-resonant magnetic tearing modes. When tearing modes are present, the edge oscillation harmonics decouple, and edge-localized modes return. In this article, we conclude that nonlinear interaction with tearing modes interrupts the formation of the edge harmonic oscillation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Stability and Control of Burning Tokamak Plasmas with Resistive Walls (Final Report)

Work supported by the grant, "Stability and Control of Burning Tokamak Plasmas with Resistive Walls" in the period Aug 2017 to 2023 can be cast in three general categories: (1) linear tearing regimes and the effects on the response to error fields and resistive walls: (2) nonlinear tearing modes in the presence of error fields, with locking; and (3) energetic particle effects. In the first category, we have completed a study of tearing mode regimes with extended MHD effects, including parallel dynamics and toroidal effects, notably favorable average curvature. This work has been presented at the 2018 Sherwood Conference. This work has been published in the ArXiv and is being prepared for publication in Physics of Plasmas. A systematic study of shaping in a tokamak plasma with resistive tearing layers and a resistive wall has been presented in the PhD dissertation by Dov Rhodes, a student of Andrew Cole at Columbia University. John Finn was on Rhodes's PhD committee, and was a co-author of a paper published in Physics of Plasmas on that work. A detailed study of nonlinear tearing modes in the presence of finite beta, favorable average curvature, and an error field has been nearly completed. In this study it was found that the response to an error field with real frequency a tearing layer agreed with analytic results, and that tearing mode saturation by flattening of the current profile as well as destabilization due to flattening of the pressure profile were important factors in the locking process. This work was presented at the 2017 APS/DPP Conference and at the 2018 Sherwood Conference. The effects of energetic ions on tearing modes was presented at the 2017 APS/DPP Conference and in the PhD dissertation of Michael Halfmoon. John Finn served as a committee member on Halfmoon's PhD committee. Extensions to this work including two fluid effects were performed and presented at the APS/DPP Conference in 2017.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗