Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature interpolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Retrieval of surface temperature by remote sensing

A simple procedure and computer program were developed for retrieving the surface temperature from the measurement of upwelling infrared radiance in a single spectral region in the atmosphere. The program evaluates the total upwelling radiance at any altitude in the region of the CO fundamental band (2070-2220 1/cm) for several values of surface temperature. Actual surface temperature is inferred by interpolation of the measured upwelling radiance between the computed values of radiance for the same altitude. Sensitivity calculations were made to determine the effect of uncertainty in various surface, atmospheric and experimental parameters on the inferred value of surface temperature. It is found that the uncertainties in water vapor concentration and surface emittance are the most important factors affecting the accuracy of the inferred value of surface temperature.

Gupta, S. K.↗

PROBLEM DEPENDENT DOPPLER BROADENING OF CONTINUOUS ENERGY CROSS SECTIONS IN THE KENO MONTE CARLO COMPUTER CODE

For many Monte Carlo codes cross sections are generally only created at a set of predetermined temperatures. This causes an increase in error as one moves further and further away from these temperatures in the Monte Carlo model. This paper discusses recent progress in the Scale Monte Carlo module KENO to create problem dependent, Doppler broadened, cross sections. Currently only broadening the 1D cross sections and probability tables is addressed. The approach uses a finite difference method to calculate the temperature dependent cross-sections for the 1D data, and a simple linear-logarithmic interpolation in the square root of temperature for the probability tables. Work is also ongoing to address broadening theS (alpha , beta) tables. With the current approach the temperature dependent cross sections are Doppler broadened before transport starts, and, for all but a few isotopes, the impact on cross section loading is negligible. Results can be compared with those obtained by using multigroup libraries, as KENO currently does interpolation on the multigroup cross sections to determine temperature dependent cross-sections. Current results compare favorably with these expected results.

Monte Carlo↗

Global Paleoclimatic Data for 6000 Yr B.P.

To determine regional and global climatic variations during the past 6000 years, pollen, lake level, and marine plankton data from 797 stations were compiled to form a global data set. Radiocarbon dating and dated tephras were used to determine the ages of the specimens. The data available for the pollen data are site number, site name, latitude, longitude, elevation, and percentages of various taxa. For lake-level data, the data are site number, site name, latitude, longitude, and lake-level status. And for marine plankton, the data are site number, site name, latitude, longitude, water depth, date, dating control code, depth of sample, interpolated age of sample, estimated winter and summer sea-surface temperatures, and percentages of various taxa. The data are in 55 files: 5 files for each of 9 geographic regions and 10 supplemental files. The files for each region include (1) a FORMAT file describing the format and contents of the data for that region, (2) an INDEX file containing descriptive information about each site and its data, (3) a DATA file containing the data and available climatic estimates, (4) a PUBINDEX file indexing the bibliographic references associated with each site, and (5) a REFERENCE file containing the bibliographic references. The files range in size from 2 to 66 kB.

54 ENVIRONMENTAL SCIENCES↗

A fast and accurate radiance algorithm for application to inversion of limb measurements

A method is devised to accurately calculate broad band limb radiance based on a precalculated data base consisting of homogeneous path emissivity as a function of mass path data for various temperatures and pressures. Accurately estimating limb radiance by splicing together interpolated information from the emissivity curves requires no temperature or pressure weighting, and only two interpolations per layer path. The emissivity growth approximation (EGA) technique is applied in a simulated inversion study to the inference of O3, H2O, NO2 and HNO3, and it is found to have comparable accuracies to more sophisticated many-degree band models. The EGA technique is also found to be two orders of magnitude faster, while requiring one second per inversion for one constituent at one-km resolution, allowing a completely nonlinear relaxation time inversion to be done at linear speeds. The technique is also expected to work well for nadir calculations, and prove adequate for estimating occultation radiances.

Gordley, L. L.↗

TEMPERATURE PREDICTION IN 3013 CONTAINERS IN K AREA MATERIAL STORAGE (KAMS) FACILITY USING REGRESSION METHODS

3013 containers are designed in accordance with the DOE-STD-3013-2004. These containers are qualified to store plutonium (Pu) bearing materials such as PuO2 for 50 years. DOT shipping packages such as the 9975 are used to store the 3013 containers in the K-Area Material Storage (KAMS) facility at Savannah River Site (SRS). DOE-STD-3013-2004 requires that a comprehensive surveillance program be set up to ensure that the 3013 container design parameters are not violated during the long term storage. To ensure structural integrity of the 3013 containers, thermal analyses using finite element models were performed to predict the contents and component temperatures for different but well defined parameters such as storage ambient temperature, PuO{sub 2} density, fill heights, weights, and thermal loading. Interpolation is normally used to calculate temperatures if the actual parameter values are different from the analyzed values. A statistical analysis technique using regression methods is proposed to develop simple polynomial relations to predict temperatures for the actual parameter values found in the containers. The analysis shows that regression analysis is a powerful tool to develop simple relations to assess component temperatures.

42 ENGINEERING↗

High Accuracy, Absolute, Cryogenic Refractive Index Measurements of Infrared Lens Materials for JWST NIRCam using CHARMS

The current refractive optical design of the James Webb Space Telescope (JWST) Near Infrared Camera (NIRCam) uses three infrared materials in its lenses: LiF, BaF2, and ZnSe. In order to provide the instrument s optical designers with accurate, heretofore unavailable data for absolute refractive index based on actual cryogenic measurements, two prismatic samples of each material were measured using the cryogenic, high accuracy, refraction measuring system (CHARMS) at NASA GSFC, densely covering the temperature range from 15 to 320 K and wavelength range from 0.4 to 5.6 microns. Measurement methods are discussed and graphical and tabulated data for absolute refractive index, dispersion, and thermo-optic coefficient for these three materials are presented along with estimates of uncertainty. Coefficients for second order polynomial fits of measured index to temperature are provided for many wavelengths to allow accurate interpolation of index to other wavelengths and temperatures.

Leviton, Douglas↗

Membranes with topological charge and AdS{sub 4}/CFT{sub 3} correspondence

If the second Betti number b{sub 2} of a Sasaki-Einstein manifold Y{sup 7} does not vanish, then M-theory on AdS{sub 4}xY{sup 7} possesses 'topological' U(1){sup b}{sub 2} gauge symmetry. The corresponding Abelian gauge fields come from three-form fluctuations with one index in AdS{sub 4} and the other two in Y{sup 7}. We find black membrane solutions carrying one of these U(1) charges. In the zero-temperature limit, our solutions interpolate between AdS{sub 4}xY{sup 7} in the UV and AdS{sub 2}xR{sup 2}xsquashed Y{sup 7} in the IR. In fact, the AdS{sub 2}xR{sup 2}xsquashed Y{sup 7} background is by itself a solution of the supergravity equations of motion. These solutions do not appear to preserve any supersymmetry. We search for their possible instabilities and do not find any. We also discuss the meaning of our charged membrane backgrounds in a dual quiver Chern-Simons gauge theory with a global U(1) charge density. Finally, we present a simple analytic solution which has the same IR but different UV behavior. We reduce this solution to type IIA string theory, and perform T-duality to type IIB. The type IIB metric turns out to be a product of the squashed Y{sup 7} and the extremal Banados-Teitelboim-Zanelli black hole. We discuss an interpretation of this type IIB background in terms of the (1+1)-dimensional conformal field theory on D3-branes partially wrapped over the squashed Y{sup 7}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mixing A -type and G -type B -site antiferromagnetism in A M n 1 - x F e x O 3 ( A = La , Nd )

Using a classical Heisenberg model with anisotropic nearest-neighbor superexchange and uniaxial anisotropy, I investigate the magnetic order of the transition metals on the B sites in AMn 1-x Fe x O 3 (A=La, Nd; x=[0,1]) with Monte Carlo methods. Magnetic parameters are extracted from preexisting experimental data when available and otherwise estimated with calculations. Superexchange energies are compared to density functional theory and anisotropy energies to ligand field theory, and the potential for doping-induced strain affecting these parameters is considered. I find coexistence regions of different types of magnetic order (A-type and G-type antiferromagnetism), regions with distinct magnetic transitions for the two order parameters, noncollinear ground states for intermediate values of x that decrease the amplitude of the ordered moment in a way consistent with experiment for low dopings, and a reproduction of the experimentally determined, nonmonotonic interpolation of the ordering temperatures. The detailed shape of the phase boundaries in (x,T) space is found to be diagnostic of the magnetic interactions. Finally, these results also suggest a ferrimagnetic ground state for the A 2 MnFeO 6 double perovskite with T N ≈270K for A=La and Nd.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ding_MICRE_V1.0_Environmental_Parameters

The files contain the a variety of quantities useful in the analysis of MICRE datasets. Specifically, 1) Local meteorological conditions including: sea surface temperature (SST), lower tropospheric stability (LTS), marine cold air outbreak (MCAO) index, inversion height, and lifting condensation level (LCL). 2) Location relative to the oceanic polar front (PF), center of the closest cyclone, and nearest warm fronts and cold fronts 3) Location of air parcels 72 hours prior to its arrival at/above the MICRE site computed using the HYSPLIT back trajectory model

54 ENVIRONMENTAL SCIENCES↗

Role of back stress in the creep behavior of particle strengthened alloys

Recent developments in the interpolation of high-temperature steady-state creep results have introduced the concept that the stress dependence of the creep rate should be in terms of the effective stress referred to as the applied stress minus a back stress. This paper reports on back stresses taken from data on a gamma-prime-strengthened wrought nickel-base superalloy, an oxide dispersion-strengthened ODS nickel-base solid solution alloy, and an ODS nickel-base superalloy. The effect of air versus vacuum environments and the effect of dynamic changes in the strengthening microstructures on the magnitude of the back stress are assessed. The role of modulus normalization and the back stress correction in determining the true creep activation energy are examined. It is shown that the high values of the apparent stress exponent 'n' of the steady-state creep equation can be easily explained through a relationship between n, the true stress exponent of steady-state creep, and the stress which when subtracted from the applied stress results in the effective driving stress acting on the mobile dislocations during creep.

Purushothaman, S.↗

An Earth longwave radiation climate model

An Earth outgoing longwave radiation (OLWR) climate model was constructed for radiation budget study. Required information is provided by on empirical 100mb water vapor mixing ratio equation of the mixing ratio interpolation scheme. Cloud top temperature is adjusted so that the calculation would agree with NOAA scanning radiometer measurements. Both clear sky and cloudy sky cases are calculated and discussed for global average, zonal average and world-wide distributed cases. The results agree well with the satellite observations. The clear sky case shows that the OLWR field is highly modulated by water vapor, especially in the tropics. The strongest longitudinal variation occurs in the tropics. This variation can be mostly explained by the strong water vapor gradient. Although in the zonal average case the tropics have a minimum in OLWR, the minimum is essentially contributed by a few very low flux regions, such as the Amazon, Indonesian and the Congo.

Yang, S. K.↗

The Mg 280-nm doublet as a monitor of changes in solar ultraviolet irradiance

Solar irradiance data gathered with the Nimbus 7 spacecraft from 1978-1985 are compared with atmospheric MG 289-nm doublet emission line data to evaluate the possibility of using the rotational line data to calculate the total solar UV input. The satellite instrumentation is described, including the calibration equipment and procedures. The spacecraft records solar irradiance once per day and the remainder of the time records irradiance scattered by the atmosphere. The measured irradiances are converted to equivalent brightness temperatures, which can be interpolated for specific layers of the atmosphere. Sample daily data are provided to illustrate the correlation between variations in the Mg-II core radiation and the soalr UV irradiance. Techniques are defined for correcting for periodic variations in instrument performance to quantify long-term solar UV radiance variations. Using the atmospheric Mg-II doublet radiation for measuring soalr UV irradiance is concluded of value for characterizing the effects of solar radiation on the atmosphere.

Heath, D. F.↗

The correlated-k method for radiation calculations in nonhomogeneous atmospheres

The accuracy of the correlated-k method, which is a technique for radiation calculations with spectrally averaged data in nonhomogeneous atmospheres, is investigated. Comparisons are made for scattering and absorbing atmospheres containing CO2, H2O, and O3, and it is concluded that: (1) the errors in correlated-k are generally of order of magnitude 1 percent, (2) much larger errors occur only when a radiative quantity is very much smaller than its average value, (3) errors do not depend systematically on the gas molecule, the distributions of gases and aerosols, or on the aerosol optical properties, and (4) errors do not systematically increase with the order of differencing. It is shown that the multiplication property for transmission by overlapping bands can be incorporated into correlated-k, that temperature effects can be interpolated on a coarse grid, and that 10 quadrature points are often sufficient to average over complex spectral intervals containing thousands of lines.

Goody, Richard↗

Secondary Sonic Boom Ray Path Prediction using sBOOM

Sonic boom ray path equations are solved numerically to show the extent of secondary booms compared to primary sonic boom carpet. Secondary booms are shown to reach altitudes of ~125 km before turning toward the ground and impinging at lateral distances of ~50 km and beyond. Exact closed-form solutions of the ray paths and their partial derivatives with respect to certain relevant parameters are derived for the simplified case of windless atmospheres and compared against numerical solutions. Ray tube areas are computed using the Jacobian of a single ray as opposed to the traditional technique of using 4 rays that are temporally and azimuthally perturbed. The ray tube areas corresponding to secondary booms can get 1000 times larger than those from primary booms. The numerically computed ray tube areas are verified using exact expressions for the special case of windless atmospheres. Finally, pressure scaling due to ray tube area changes and atmospheric stratification is presented and the shortcomings associated with the current atmospheric interpolation techniques are discussed. It is determined that piece-wise linear interpolation of the atmospheric temperature may be inadequate and could lead to numerical noise in the prediction of secondary booms.

Sriram K Rallabhandi↗

Comparison of Predictive Models for PV Module Performance (Presentation)

This paper examines three models used to estimate the maximum power (P{sub m}) of PV modules when the irradiance and PV cell temperature are known: (1) the power temperature coefficient model, (2) the PVFORM model, and (3) the bilinear interpolation model. A variation of the power temperature coefficient model is also presented that improved model accuracy. For modeling values of P{sub m}, an 'effective' plane-of-array (POA) irradiance (E{sub e}) and the PV cell temperature (T) are used as model inputs. Using E{sub e} essentially removes the effects of variations in solar spectrum and reflectance losses, and permits the influence of irradiance and temperature on model performance for P{sub m} to be more easily studied. Eq. 1 is used to determine E{sub e} from T and the PV module's measured short-circuit current (I{sub sc}). Zero subscripts denote performance at Standard Reporting Conditions (SRC).

14 SOLAR ENERGY↗

Coupling of horizontal, vertical, and temporal resolving power of a satellite temperature sounder

This paper examines the interconnection between the vertical, horizontal, and temporal resolving power of satellite temperature-sounding system. Using a temperature cross section produced by interpolating a set of RAOBs taken at three locations in Texas; Shreveport, Louisiana; Jackson, Mississippi; and Montgomery, Alabama, and an artificially constructed temperature cross section, it was found that the horizontal and temporal resolving power are subject to strong controls imposed by the vertical resolving power of the sounder. Thus, to improve the horizontal or temporal resolving power it is necessary to improve the vertical resolving power' of the satellite instrument itself, or to extend the a priori external information to include correct horizontal and temporal structure.

Thompson, Owen E.↗

Creation of problem-dependent Doppler-broadened cross sections in the KENO Monte Carlo code

In this paper, we introduce a quick method for improving the accuracy of Monte Carlo simulations by generating one- and two-dimensional cross sections at a user-defined temperature before performing transport calculations. A finite difference method is used to Doppler-broaden cross sections to the desired temperature, and unit-base interpolation is done to generate the probability distributions for double differential two-dimensional thermal moderator cross sections at any arbitrarily user-defined temperature. The accuracy of these methods is tested using a variety of contrived problems. In addition, various benchmarks at elevated temperatures are modeled, and results are compared with benchmark results. Lastly, the problem-dependent cross sections are observed to produce eigenvalue estimates that are closer to the benchmark results than those without the problem-dependent cross sections.

42 ENGINEERING↗

Determination of atmospheric properties for STS-1 aerothermodynamic investigations

A procedure for determining an approximation to the freestream atmospheric properties along the Shuttle entry trajectory is presented. Meteorological data as input is obtained by rawinsondes from surface to 70 km, and meteorological spheres from 60-90 km, launched from Hawaii and California. The Langley Atmospheric Information Retrieval System (LAIRS) developed to approximate the atmospheric freestream properties along the flight path, is outlined, noting temperature and wind data are interpolated in altitude, while gradients and diurnal and semidiurnal coefficients are taken from the COSPAR reference atmosphere. The data are input to a model to project temperature profiles for the Shuttle descent, and the input atmospheric parameters are listed. Efforts are continuing in order to correct discrepancies in the generated profiles for regions below 3 km.

Price, J. M.↗