Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature sensing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Maximum power transfer from a solar-cell array by sensing array temperature

A technique is described in which a spacecraft solar-cell array is caused to operate at or near maximum power output over a wide range of environmental conditions. The output of an array temperature sensor is used to vary the duty cycle of a pulse-width-modulated impedance regulator so that the array operates at the voltage of maximum power. A resistance-type temperature sensor was found to be applicable for most spacecraft missions. However, a solar cell used as a temperature sensor has the advantage of negligible transient errors on lightweight arrays for orbiting spacecraft.

Sussman, M.↗
NASA NTRS1977

Application of statistical inversion to ground-based microwave remote sensing of temperature and water vapor profiles

Surface-based observations of downwelling microwave thermal emission are related to temperature and humidity profiles via a standard integral equation of radiative transfer. Both in clear and in cloudy atmospheres, statistical inversion techniques are used to retrieve profiles from a data vector of brightness observations and surface meteorological constraints. For the clear case, accuracy predictions and profile retrievals are illustrated for: (1) single frequency angular scanned data; (2) multi-frequency angular scanned data; and (3) multi-frequency zenith data. For the last case predicted and achieved accuracies were compared in a recently conducted radiometric experiment. Retrievals of cloud contaminated radiometric data are elaborated.

Westwater, E. R.↗
NASA NTRS1982

Remote sensing of temperature profiles in the atmosphere

Methods of regularized and generalized cross validation can be used to estimate the atmosphere's temperature, moisture, and wind structure from a finite number m noisy measurements by meteorological satellites on the intensity of upwelling radiation in selected channel frequencies. The inversion of the equation of radiative transfer is discussed for data obtained by TIROS N satellite.

Osullivan, F.↗
NASA NTRS1990

The use of remotely sensed surface temperature and a spectral vegetation index for evaluating heat fluxes over the Konza Prairie

The relationship between surface temperature T(s) and the normalized difference vegetation index (NDVI) is examined to determine whether it can be used to characterize latent heat fluxes (LEs). The regression of T(s) on NDVI is studied in the context of surface heat fluxes over the prairie with a limited data set for four flux-measurement sites. The 17 flux-measurement stations at the sites provided data that are consistently significant at the 99-percent confidence level for the regression of T(s) on NDVI. Variations in the regression slopes are found to correlate with variations in the ground heat flux but not with LE. Important components of the regression of T(s) on NDVI include fractional vegetation cover and surface-soil moisture conditions. The relationship is important for determining the relative contributions of the soil and vegetation components of an area's total evaporative flux.

Hope, A. S.↗
NASA NTRS1992

Estimation of sensible heat flux from remotely sensed canopy temperatures

Temperatures of tallgrass priarie vegetation were measured with infrared thermometers (IRT) at different view zenith and azimuth angles. The optimum IRT view zenith angle for estimating sensible heat fluxes (H) was determined by comparing H estimated with eddy correlation and/or Bowen ratio techniques to H calculated by a method suggested by Hatfield et al. (1984). For wind speeds of 5 m/s or greater, H estimated with surface temperatures measured at a 0 deg or 20 deg view zenith angle gave the best agreement, but for wind speeds of less than 4 m/s the best estimate of H was made with surface temperatures measured at a 40 deg or 60 deg view zenith angle.

Vining, R. C.↗
NASA NTRS1979

Analysis and preliminary design of optical sensors for propulsion control

A fiber-optic sensor concept screening study was performed. Twenty sensor subsystems were identified and evaluated. Two concepts selected for further study were the Fabry-Perot fiber-optic temperature sensor and the pulse-width-modulated phosphorescent temperature sensor. Various designs suitable for a Fabry-Perot temperature sensor to be used as a remote fiber-optic transducer were investigated. As a result, a particular design was selected and constructed. Tests on this device show that spectral peaks are produced from visible white light, and the change in wavelength of the spectral peaks produced by a change in temperature is consistent with theory and is 36 nm/C for the first order peak. A literature search to determine a suitable phosphor for implementing the pulse-width-modulated fiber optic temperature sensor was conducted. This search indicated that such a device could be made to function for temperatures up to approximately 200 C. Materials like ZnCdS and ZnSe activated with copper will be particularly applicable to temperature sensing in the cryogenic to room temperature region. While this sensing concept is probably not applicable to jet engines, the simplicity and potential reliability make the concept highly desirable for other applications.

James, K. A.↗
NASA NTRS1979

Assessment of the urban heat island effect through the use of satellite data

A recent NASA satellite is obtaining high spatial resolution thermal infrared data at times of day appropriate for the study of the urban heat island effect. Quantitative estimates of the extent and intensity of urban surface heating are obtained by analysis of digital data acquired over the New York City-New England area. In many large cities satellite sensed temperatures are 10-15 C warmer than in surrounding rural areas. A thorough interpretation of the elevated urban surface temperature will require studies of (1) the relationship between remotely sensed surface temperatures and air temperatures, and (2) compensation for observed very localized heating due to industry and/or power plants.

Price, J. C.↗
NASA NTRS2004

Passive Measurement of CO2 Column from an Airborne Platform

We are in the third and final year of our IIP funding to develop a sensor for very precise determination of the CO2 Column. Global measurements of this sort from a satellite platform are needed to improve our understanding of the global carbon budget. In previous reports to this meeting we have described the method by which this system operates and presented data taken during ground based tests of the instrument. Work in the final year has concentrated on building the flight hardened version of the instrument that will be used in our field trials on the Dryden DC-8. The flight unit represents an integration of three channels into a single instrument. These three channels are the CO2 channel, the oxygen pressure sensing channel, and the oxygen temperature sensing channel. Integration of the three channels into a single unit significantly decreases the size of the instrument. The flight unit also employs more rugged optical mounts and integrated optical shielding. Light enters the instrument from below first striking the right angled mirror shown extending over the edge of the platform. The light is then focused through a pinhole to define the instrument field of view, chopped and recollimated. Dichroic mirrors are used to separate the CO2 wavelength from the O2 wavelength and that light is further divided by a 50-50 beamsplitter between the 2 oxygen channels - the pressure channel and the temperature channel. The six white boxes contain the detectors for each of the three channels. The detectors on the left in the photo serve the reference channels and the detectors on the right are for the Fabry-Perots. CO2 is measured by the pair of detectors farthest from the viewer. Pressure via O2 is detected by the central pair of detectors. The closest pair is used to determine temperature via O2.

Heaps, William S.↗
NASA NTRS1994

Thermal feedback in virtual reality and telerobotic systems

A new concept has been developed that allows temperature to be part of the virtual world. The Displaced Temperature Sensing System (DTSS) can 'display' temperature in a virtual reality system.The DTSS can also serve as a feedback device for telerobotics. For virtual reality applications the virtual world software would be required to have a temperature map of its world. By whatever means (magnetic tracker, ultrasound tracker, etc.) the hand and fingers, which have been instrumented with thermodes, would be tracked. The temperature associated with the current position would be transmitted to the DRSS via a serial data link. The DTSS would provide that temperature to the fingers. For telerobotic operation the function of the DTSS is to transmit a temperature from a remote location to the fingers where the temperature can be felt.

Zerkus, Mike↗
NASA NTRS1987

Controller for Fast-Acting Furnaces

Circuit slows responses of certain furnace types. Circuit output actuates external power supply, which furnishes heater power to furnace in response to furnace temperature sensed by thermocouple. Temperaturecontrol circuit suppresses temperature oscillations in rapidly responding laboratory furnaces. Ordinarily, such furnaces difficult to control because temperatures change very rapidly with changes in delivered electric power. Ordinary commercial controllers not designed to handle this kind of response.

Williams, R. J.↗
NASA NTRSDate not supplied

Air Data Probe Anomalies in Flight through Measured High Ice Water Content Conditions

High concentrations of ice crystals in convective storms have caused anomalous air temperature and airspeed readings during commercial and research flight operations. These anomalies occur when ice crystals are ingested in the heated probe inlet, melt or partially melt to liquid water, and then refreeze or remain in a liquid state depending on the probe heat and cloud conditions. In pitot probes, the refreezing may cause complete blockage of the total pressure, which causes airspeed anomalies. In total air temperature probes, the melted ice water may flow near the temperature sensing element and cause the total air temperature reading to approach 0 degree Celsius. During the High Ice Water Content (HIWC) RADAR and HIWC-2022 flight campaigns and the Convective Process Experiment (CPEX-CV) flight campaign, a total of 71 anomalies were recorded on the NASA DC-8 pitot probes when subjected to specific flight and cloud conditions. Similarly, a research TAT probe mounted near the pitot probes had 19 anomalies. This paper presents analyses of the measured natural conditions that led to these TAT and pitot anomalies, identifies two types of pitot probe anomalies, applies a concentration factor to estimate local TWC conditions near the TAT and pitot probes, and identifies the static air temperature and pressure altitude where the anomalies occurred on the Part 33 Appendix D envelope.

Aircraft Icing↗
NASA NTRSDate not supplied

Air Data Probe Anomalies in Flight through Measured High Ice Water Content Conditions

High concentrations of ice crystals in convective storms have caused anomalous air temperature and airspeed readings during commercial and research flight operations. These anomalies occur when ice crystals are ingested in the heated probe inlet, melt or partially melt to liquid water, and then refreeze or remain in a liquid state depending on the probe heat and cloud conditions. In pitot probes, the refreezing may cause complete blockage of the total pressure, which causes airspeed anomalies. In total air temperature probes, the melted ice water may flow near the temperature sensing element and cause the total air temperature reading to approach 0 degree Celsius. During the High Ice Water Content (HIWC) RADAR and HIWC-2022 flight campaigns and the Convective Process Experiment (CPEX-CV) flight campaign, a total of 71 anomalies were recorded on the NASA DC-8 pitot probes when subjected to specific flight and cloud conditions. Similarly, a research TAT probe mounted near the pitot probes had 19 anomalies. This paper presents analyses of the measured natural conditions that led to these TAT and pitot anomalies, identifies two types of pitot probe anomalies, applies a concentration factor to estimate local TWC conditions near the TAT and pitot probes, and identifies the static air temperature and pressure altitude where the anomalies occurred on the Part 33 Appendix D envelope.

Aircraft Icing↗
NASA NTRS2017

Wide-Field Imaging Using Nitrogen Vacancies

Nitrogen vacancies in bulk diamonds and nanodiamonds can be used to sense temperature, pressure, electromagnetic fields, and pH. Unfortunately, conventional sensing techniques use gated detection and confocal imaging, limiting the measurement sensitivity and precluding wide-field imaging. Conversely, the present sensing techniques do not require gated detection or confocal imaging and can therefore be used to image temperature, pressure, electromagnetic fields, and pH over wide fields of view. In some cases, wide-field imaging supports spatial localization of the NVs to precisions at or below the diffraction limit. Moreover, the measurement range can extend over extremely wide dynamic range at very high sensitivity.

Englund, Dirk Robert↗