Search NASASearch

SEARCH · Search NASA

Results for “temporal computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Premixed shock-induced combustion studies in the hypulse facility

Engine performance calculations strongly suggest that the oblique detonation-wave engine can outperform the diffusive-burning scramjet engine in the high hypervelocity flight regime; i.e., at flight Mach numbers exceeding about 14. Research is described that examines and characterizes the behavior of oblique detonation waves (ODW). The effort is both computational and experimental, the latter utilizing the NASA Hypulse expansion tube. The experimental work is hampered by preignition of the hydrogen-oxygen-helium mixtures in either the intermediate or acceleration sections of the facility. The experiments are described and possible causes of this preignition are discussed. Initial results obtained from a parallel computation effort indicate that temporally steady ODW are achievable in the Hypulse facility.

Chinitz, W.

On spurious behavior of CFD simulations

Spurious behavior in underresolved grids and/or semi-implicit temporal discretizations for four computational fluid dynamics (CFD) simulations are studied. The numerical simulations consist of (a) a 1-D chemically relaxed nonequilibrium model, (b) the direct numerical simulation (DNS) of 2-D incompressible flow over a backward facing step, (c) a loosely-coupled approach for a 2-D fluid-structure interaction, and (d) a 3-D compressible unsteady flow simulation of vortex breakdown in delta wings. Using knowledge from dynamical systems theory, various types of spurious behaviors that are numerical artifacts were systematically identified. These studies revealed the various possible dangers of misinterpreting numerical simulation of realistic complex flows that are constrained by the available computing power. In large scale computations underresolved grids, semi-implicit procedures, loosely-coupled implicit procedures, and insufficiently long time integration in DNS are most often unavoidable. Consequently, care must be taken in both computation and in interpretation of the numerical data. The results presented confirm the important role that dynamical systems theory can play in the understanding of the nonlinear behavior of numerical algorithms and in aiding the identification of the sources of numerical uncertainties in CFD.

Numerical Solution

Determining Trends in Impervious Cover for the Mobile Bay, AL Region for 1974-2008, Based on a Landsat Time Series

This presentation will discuss the development and use of Landsat-based impervious cover products in conjunction with land use land cover change products to assess multi-decadal urbanization across the Mobile Bay region at regional and watershed scales. This nationally important coastal region has undergone a variety of ephemeral and permanent land use land cover change since the mid-1970s, including gradual but consequential increases in urban surface cover. This urban sprawl corresponds with increased regional percent impervious cover. The region s coastal zone managers are concerned about the increasing percent impervious cover, since it can negatively influence water quality and is an important consideration for coastal conservation and restoration work. In response, we processed multi-temporal Landsat data to compute maps of percent impervious cover for multiple dates from 1974 through 2008, roughly at 5-year intervals. Each year of product was classified using one single date of leaf-on and leaf-off Landsat data in conjunction with Cubist software. We are assessing Landsat impervious cover product accuracy through comparisons to available reference data, including available NLCD impervious cover products from the USGS, raw Landsat data, plus higher spatial resolution aerial and satellite data. In particular, we are quantitatively comparing the 2008 Landsat impervious cover products to those from QuickBird 2.4-meter multispectral data. Initial visual comparisons with the QuickBird impervious cover product suggest that the 2008 Landsat product tends to underestimate impervious cover for high density urban areas and to overestimate impervious cover in established residential subdivisions mixed with forested cover. Landsat TM and ETM data appears to produce more accurate impervious cover products compared to those using lower resolution Landsat MSS data. Although imperfect, these Landsat impervious cover products have helped the Mobile Bay National Estuary Program visualize basic urbanization trends for multiple HUC-12 watersheds of concern to them and their constituents

Spruce, Joseph P.

Recent Developments in X-Ray Diagnostics for Cryogenic and Optically Dense Coaxial Rocket Sprays

The mixing and atomization of propellants is often characterized by optically dense flow fields and complex breakup dynamics. In the development of propulsion systems, the complexity of relevant physics and the range of spatio-temporal scales often makes computational simulation impractical for full scale injector elements; consequently, continued research into improved systems for experimental flow diagnostics is ongoing. One area of non-invasive flow diagnostics which has seen widespread growth is using synchrotron based x-ray diagostics. Over the past 3 years, a series of water and cryogenic based experiments were performed at the Advanced Photon Source, Argonne National Lab, on a NASA in-house designed swirl co-axial rocket injector, designed for operation using liquid oxygen and liquid methane in support of Project Morpheus. A range of techniques, such as x-ray fluorescence and time-averaged radiography were performed providing qualitative and quantitative mass and phase distributions, and were complemented by investigations using time-resolved radiography and white beam imaging, which provided information on breakup and mixing dynamics. Results of these investigations are presented, and conclusions regarding the viability of x-ray based diagnostics are discussed.

Radke, Christopher D.

3D Radiative MHD Modeling of the Solar Atmospheric Dynamics and Structure

Dramatic dynamical phenomena accompanied by strong thermodynamic and magnetic structuring are the primary drivers of great interest in studying the solar atmosphere with high spatial and temporal resolutions. Using current computational capabilities, it has become possible to model the magnetized solar plasma in different regimes with a high degree of realism. To study the fine structuring of the solar atmosphere and dynamics, we use 3D MHD radiative models covering all layers from the upper convection zone to the corona. Realistic 3D radiative MHD modeling of the solar magnetoconvection and atmosphere allows us to generate synthetic observables that directly link the physical properties of the solar plasma to spectroscopic observables. In the presentation, we discuss qualitative and quantitative changes of the atmospheric structure and dynamics at different layers of the solar atmosphere, properties of acoustic and surface gravity waves, sources of local heating in the chromosphere-corona transition region, formation of shocks, and high-frequency oscillations in the corona, as well as manifestation of these phenomena in the modeled observables.

SMD

A Comparative Study of Contrail Frequency Indices and GOES-16 Contrail Data Set

Contrail formations have been shown to contribute to the greenhouse effect: they are practically transparent to incoming solar radiation and do little to reflect heat away from Earth but are highly effective at trapping heat within Earth’s atmosphere. To understand the impact contrails have on climate change, contrail frequency indices (CFIs) can be used as a method to quantify aircraft-induced persistent contrails. These indices are capable of tracking long-term contrail formation and identify regions of airspace with the highest contrail formation rates. In this aper, an algorithm is proposed which is capable of using NASA Sherlock and Global Forecast System (GFS) datasets and computing CFIs over large geographic regions and long temporal intervals using NASA Ames’ High-End Computing Capability (HECC) supercomputing system. CFIs are computed using nowcast weather data and previously flown flight tracks. This paper calculated the CFIs of all twenty Air Route Traffic Control Centers in the National Airspace System on October 28th, 2019 and compared the distribution of non-zero CFIs with observed contrail data collected from GOES-16 Satellite data in order to assess the accuracy of the CFI system as a contrail prediction model. It was ultimately determined that the computed CFIs were broadly distributed in the same way as the GOES-16 contrail data and that the individual CFIs computed at the latitude/longitude points at which GOES-16 contrail masks were available had high precision and recall (at 0.75 and 0.86 respectively). While these validation results bode well for the accuracy of the CFI method, the number of provided GOES-16 masks was quite small. Future work should aim to increase the size of the GOES-16 dataset in order to perform a more comprehensive comparison between these two datasets.

Contrails

A Comparative Study of Contrail Frequency Indices and GOES-16 Contrail Data Set

Contrail formations have been shown to contribute to the greenhouse effect: they are practically transparent to incoming solar radiation and do little to reflect heat away from Earth but are highly effective at trapping heat within Earth’s atmosphere. To understand the impact contrails have on climate change, contrail frequency indices (CFIs) can be used as a method to quantify aircraft-induced persistent contrails. These indices are capable of tracking long-term contrail formation and identify regions of airspace with the highest contrail formation rates. In this aper, an algorithm is proposed which is capable of using NASA Sherlock and Global Forecast System (GFS) datasets and computing CFIs over large geographic regions and long temporal intervals using NASA Ames’ High-End Computing Capability (HECC) supercomputing system. CFIs are computed using nowcast weather data and previously flown flight tracks. This paper calculated the CFIs of all twenty Air Route Traffic Control Centers in the National Airspace System on October 28th, 2019 and compared the distribution of non-zero CFIs with observed contrail data collected from GOES-16 Satellite data in order to assess the accuracy of the CFI system as a contrail prediction model. It was ultimately determined that the computed CFIs were broadly distributed in the same way as the GOES-16 contrail data and that the individual CFIs computed at the latitude/longitude points at which GOES-16 contrail masks were available had high precision and recall (at 0.75 and 0.86 respectively). While these validation results bode well for the accuracy of the CFI method, the number of provided GOES-16 masks was quite small. Future work should aim to increase the size of the GOES-16 dataset in order to perform a more comprehensive comparison between these two datasets.

Contrails

French Meteor Network for High Precision Orbits of Meteoroids

There is a lack of precise meteoroids orbit from video observations as most of the meteor stations use off-the-shelf CCD cameras. Few meteoroids orbit with precise semi-major axis are available using film photographic method. Precise orbits are necessary to compute the dust flux in the Earth s vicinity, and to estimate the ejection time of the meteoroids accurately by comparing them with the theoretical evolution model. We investigate the use of large CCD sensors to observe multi-station meteors and to compute precise orbit of these meteoroids. An ideal spatial and temporal resolution to get an accuracy to those similar of photographic plates are discussed. Various problems faced due to the use of large CCD, such as increasing the spatial and the temporal resolution at the same time and computational problems in finding the meteor position are illustrated.

Atreya, P.

BASS Code Development

The BASS computational aeroacoustic code solves the fully nonlinear Euler equations in the time domain in two-dimensions. The acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The spatial mode generation, propagation and decay characteristics are predicted by assuming the acoustic field away from the stator can be represented as a uniform flow with small harmonic perturbations superimposed. The computed field is then decomposed using a joint temporal-spatial transform to determine the wave amplitudes as a function of rotor harmonic and spatial mode order. This report details the following technical aspects of the computations and analysis. 1) the BASS computational technique; 2) the application of periodic time shifted boundary conditions; 3) the linear theory aspects unique to rotor-stator interactions; and 4) the joint spatial-temporal transform. The computational results presented herein are twofold. In each case, the acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The fan under consideration here like modern fans is cut-off at +, and propagating acoustic waves are only expected at 2BPF and 3BPF. In the first case, the computations showed excellent agreement with linear theory predictions. The frequency and spatial mode order of acoustic field was computed and found consistent with linear theory. Further, the propagation of the generated modes was also correctly predicted. The upstream going waves propagated from the domain without reflection from the in ow boundary. However, reflections from the out ow boundary were noticed. The amplitude of the reflected wave was approximately 5% of the incident wave. The second set of computations were used to determine the influence of steady loading on the generated noise. Toward this end, the acoustic response was determined with three steady loading conditions: design, low-loading, high-loading. The overall trend showed significant (approximately 10 dB) increases in the generated noise for the highly loaded stator.

Sawyer, Scott

Intercomparison of Recent Anomaly Time-Series of OLR as Observed by CERES and Computed Using AIRS Products

This paper compares recent spatial and temporal anomaly time series of OLR as observed by CERES and computed based on AIRS retrieved surface and atmospheric geophysical parameters over the 7 year time period September 2002 through February 2010. This time period is marked by a substantial decrease of OLR, on the order of +/-0.1 W/sq m/yr, averaged over the globe, and very large spatial variations of changes in OLR in the tropics, with local values ranging from -2.8 W/sq m/yr to +3.1 W/sq m/yr. Global and Tropical OLR both began to decrease significantly at the onset of a strong La Ni a in mid-2007. Late 2009 is characterized by a strong El Ni o, with a corresponding change in sign of both Tropical and Global OLR anomalies. The spatial patterns of the 7 year short term changes in AIRS and CERES OLR have a spatial correlation of 0.97 and slopes of the linear least squares fits of anomaly time series averaged over different spatial regions agree on the order of +/-0.01 W/sq m/yr. This essentially perfect agreement of OLR anomaly time series derived from observations by two different instruments, determined in totally independent and different manners, implies that both sets of results must be highly stable. This agreement also validates the anomaly time series of the AIRS derived products used to compute OLR and furthermore indicates that anomaly time series of AIRS derived products can be used to explain the factors contributing to anomaly time series of OLR.

Susskind, Joel

Numerical simulation of a powered-lift landing, tracking flow features using overset grids, and simulation of high lift devices on a fighter-lift-and-control wing

Attached as appendices to this report are documents describing work performed on the simulation of a landing powered-lift delta wing, the tracking of flow features using overset grids, and the simulation of flaps on the Wright Patterson Lab's fighter-lift-and-control (FLAC) wing. Numerical simulation of a powered-lift landing includes the computation of flow about a delta wing at four fixed heights as well as a simulated landing, in which the delta wing descends toward the ground. Comparison of computed and experimental lift coefficients indicates that the simulations capture the qualitative trends in lift-loss encountered by thrust-vectoring aircraft operating in ground effect. Power spectra of temporal variations of pressure indicate computed vortex shedding frequencies close to the jet exit are in the experimentally observed frequency range; the power spectra of pressure also provide insights into the mechanisms of lift oscillations. Also, a method for using overset grids to track dynamic flow features is described and the method is validated by tracking a moving shock and vortices shed behind a circular cylinder. Finally, Chimera gridding strategies were used to develop pressure coefficient contours for the FLAC wing for a Mach no. of 0.18 and Reynolds no. of 2.5 million.

Chawla, Kalpana

Evaluation and comparison of ERTS measurements of major crops and soil associations for selected sites in the central United States

The author has identified the following significant results. The most significant result was the use of the temporal overlay technique where the computer was used to overlay ERTS-1 data from three different dates (9 Oct., 14 Nov., 2 Dec.). The registration of MSS digital data from different dates was estimated to be accurate within one half resolution element. The temporal overlay capability provides a significant advance in machine-processing of MSS data. It is no longer essential to go through the tedious exercise of locating ground observation sites on the digital data from each ERTS-1 overpass. Once the address of a ground observation site has been located on a digital tape from any ERTS-1 overpass, the overlay technique can be used to locate the same address on a digital tape of MSS data from any other ERTS-1 pass over the same area. The temporal overlay technique also adds a valuable dimension for identifying and mapping changes in vegetation, water, and other dynamic surface features.

Baumgardner, M. F.

Breaking the mold: Overcoming the time constraints of molecular dynamics on general-purpose hardware

The evolution of molecular dynamics (MD) simulations has been intimately linked to that of computing hardware. For decades following the creation of MD, simulations have improved with computing power along the three principal dimensions of accuracy, atom count (spatial scale), and duration (temporal scale). Since the mid-2000s, computer platforms have, however, failed to provide strong scaling for MD, as scale-out central processing unit (CPU) and graphics processing unit (GPU) platforms that provide substantial increases to spatial scale do not lead to proportional increases in temporal scale. Important scientific problems therefore remained inaccessible to direct simulation, prompting the development of increasingly sophisticated algorithms that present significant complexity, accuracy, and efficiency challenges. While bespoke MD-only hardware solutions have provided a path to longer timescales for specific physical systems, their impact on the broader community has been mitigated by their limited adaptability to new methods and potentials. In this work, we show that a novel computing architecture, the Cerebras wafer scale engine, completely alters the scaling path by delivering unprecedentedly high simulation rates up to 1.144 M steps/s for 200 000 atoms whose interactions are described by an embedded atom method potential. This enables direct simulations of the evolution of materials using general-purpose programmable hardware over millisecond timescales, dramatically increasing the space of direct MD simulations that can be carried out. In this paper, we provide an overview of advances in MD over the last 60 years and present our recent result in the context of historical MD performance trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Climate Ocean Modeling on Parallel Computers

Ocean modeling plays an important role in both understanding the current climatic conditions and predicting future climate change. However, modeling the ocean circulation at various spatial and temporal scales is a very challenging computational task.

partition

Implicit finite-difference procedures for the computation of vortex wakes

Implicit finite-difference procedures for the primitive form of the incompressible Navier-Stokes and the compressible Euler equations are used to compute vortex wake flows. The partial differential equations in strong conservation-law form are transformed to cluster grid points in regions with large changes in vorticity. In addition to clustering, fourth-order accurate, spatial difference operators are used to help resolve the flow-field gradients. The use of implicit time-differencing permits large time steps to be taken since temporal variations are typically small. Computational efficiency is achieved by approximate factorization. Both two-dimensional and preliminary three-dimensional calculations are described and qualitatively compared with existing experimental data.

Steger, J. L.

Investigation of oscillations above the acoustic cut-off frequency for a sample of Kepler stars. II. Identifying temporal frequency shifts

ABSTRACT Stellar oscillations with frequencies greater than the acoustic cut-off frequency are not trapped within the star’s interior. Geometric interference between these high-frequency waves produces a peak-like structure in the power spectrum of the star, known as the pseudo-modes. In this study, we aim to analyse 51 stars previously identified (from a sample of 91 Kepler stars) to contain statistically significant evidence for pseudo-modes, to determine if the pseudo-mode frequencies vary in time. We obtained these frequency variations and the uncertainty by the resampled periodogram approach, where periodogram realisations were created from successive, overlapping 90-d time segments, and a cross-correlation function was generated between them. The computed shifts were compared against temporal p-mode frequency shifts and a stellar magnetic activity proxy, $S_{\mathrm{ph}}$. We found that for 16 per cent of the stars pseudo-mode frequency shifts were significantly anticorrelated with p-mode shifts, as is the case for the Sun. However, we also found pseudo-mode and p-mode shifts to be significantly correlated in-phase in 8 per cent of our sample. The remainder showed no significant correlation. We also searched for trends between the maximum variation of pseudo-mode frequency shifts and stellar parameters. Whilst we found no correlation between the maximum variation and stellar photospheric and chromospheric proxies, we found frequency variations to have a greater amplitude for cooler and slower rotating stars, which is in opposition to p-mode frequency shift variation. Temporal changes to pseudo-mode frequencies may be attributable to variations in stellar magnetic activity, and therefore can contribute to our understanding of stellar activity cycles.

Millson, L. J. (ORCID:0009000342542676)

Using LIDAR and Quickbird Data to Model Plant Production and Quantify Uncertainties Associated with Wetland Detection and Land Cover Generalizations

Spatiotemporal data from satellite remote sensing and surface meteorology networks have made it possible to continuously monitor global plant production, and to identify global trends associated with land cover/use and climate change. Gross primary production (GPP) and net primary production (NPP) are routinely derived from the MOderate Resolution Imaging Spectroradiometer (MODIS) onboard satellites Terra and Aqua, and estimates generally agree with independent measurements at validation sites across the globe. However, the accuracy of GPP and NPP estimates in some regions may be limited by the quality of model input variables and heterogeneity at fine spatial scales. We developed new methods for deriving model inputs (i.e., land cover, leaf area, and photosynthetically active radiation absorbed by plant canopies) from airborne laser altimetry (LiDAR) and Quickbird multispectral data at resolutions ranging from about 30 m to 1 km. In addition, LiDAR-derived biomass was used as a means for computing carbon-use efficiency. Spatial variables were used with temporal data from ground-based monitoring stations to compute a six-year GPP and NPP time series for a 3600 ha study site in the Great Lakes region of North America. Model results compared favorably with independent observations from a 400 m flux tower and a process-based ecosystem model (BIOME-BGC), but only after removing vapor pressure deficit as a constraint on photosynthesis from the MODIS global algorithm. Fine resolution inputs captured more of the spatial variability, but estimates were similar to coarse-resolution data when integrated across the entire vegetation structure, composition, and conversion efficiencies were similar to upland plant communities. Plant productivity estimates were noticeably improved using LiDAR-derived variables, while uncertainties associated with land cover generalizations and wetlands in this largely forested landscape were considered less important.

Cook, Bruce D.

Parallel methods for dynamic simulation of multiple manipulator systems

In this paper, efficient dynamic simulation algorithms for a system of m manipulators, cooperating to manipulate a large load, are developed; their performance, using two possible forms of parallelism on a general-purpose parallel computer, is investigated. One form, temporal parallelism, is obtained with the use of parallel numerical integration methods. A speedup of 3.78 on four processors of CRAY Y-MP8 was achieved with a parallel four-point block predictor-corrector method for the simulation of a four manipulator system. These multi-point methods suffer from reduced accuracy, and when comparing these runs with a serial integration method, the speedup can be as low as 1.83 for simulations with the same accuracy. To regain the performance lost due to accuracy problems, a second form of parallelism is employed. Spatial parallelism allows most of the dynamics of each manipulator chain to be computed simultaneously. Used exclusively in the four processor case, this form of parallelism in conjunction with a serial integration method results in a speedup of 3.1 on four processors over the best serial method. In cases where there are either more processors available or fewer chains in the system, the multi-point parallel integration methods are still advantageous despite the reduced accuracy because both forms of parallelism can then combine to generate more parallel tasks and achieve greater effective speedups. This paper also includes results for these cases.

Mcmillan, Scott