Search NASA⌕ Search

SEARCH · Search NASA

Results for “tile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

ADRIANO2 Calorimeter Performance from 2022 Test Beams

A novel high-granularity dual-readout calorimetric technique was developed as part of the T1604 collaboration. The ADRIANO2 Calorimeter Prototype consists of a pair of optically isolated, small sized tiles made of scintillating plastic and lead glass. Čerenkov light from the lead glass are exploited to for high resolution timing measurements, while high granularity from scintillating plastic can be used to probe the spatial component of the particle shower. This setup works for excellent energy resolution and particle detection for REDTOP as it is crucial for a calorimeter to detect the decay products of eta/eta-prime mesons. Measurements were collected on ADRIANO2 between February to December 2022 to evaluate the detector performance at Fermilab’s Test Beam Facility. The key metrics extracted from my analysis are the detector’s efficiency for various tile configuration and light-yield which will then be used as parameters for an upgraded REDTOP monte-carlo simulation campaign. An in-depth analysis of ADRIANO2 performance are detailed in this presentation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Improving Building Footprint Extraction Using NAIP and 3DEP Lidar Derived Features with Deep Learning

Accurate building footprint extraction is critical for applications ranging from population estimation to disaster management. Although optical imagery provides detailed spectral information, it often struggles with shadows, occlusions, and background clutter in dense urban environments. Lidar data, by contrast, offer precise elevation and structural attributes but face challenges such as variable point density and noise. This study integrates multispectral imagery from the U.S. Department of Agriculture (USDA) National Agriculture Imagery Program (NAIP) with lidar-derived feature height and intensity from the U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) to improve footprint extraction using a U-Net–based deep learning model. A six-band input stack (RGB, near-infrared, height, intensity) was developed, normalized, and tiled for training and evaluation against Microsoft Global Building Footprints (GBF). Results from the Houston, TX test site show that the six-band model achieved a precision of 0.86, recall of 0.88, F1 score of 0.87, and Intersection-over-Union (IoU) of 0.76, consistently outperforming four-band baselines by reducing false positives while maintaining sensitivity. Predictions on withheld Houston tiles confirmed strong within-region generalization, yielded a precision of 0.78, recall of 0.81, F1 score of 0.79, and IoU of 0.66. Qualitative analysis further revealed limitations stemming from both training label quality and vegetation–building confusion. These findings demonstrate the complementary value of integrating spectral and structural information for robust building footprint extraction and how domain adaptation strategies can be used to enhance cross-regional transferability.

Liu, Jung Kuan [United States Geological Survey (U↗
DOE OSTI2024

ADRIANO2 Calorimeter performance from 2022 Prototypes

A novel high-granularity dual-readout calorimetric technique was developed as part of the T1604 collaboration research program. The building block of ADRIANO2 Calorimeter consists of a pair of optically isolated, small sized tiles made of scintillating plastic and lead glass. The two components of the dual-readout energy compensation technique. Furthermore,Cˇerenkovlightfromtheleadglassareexploitedtoforhighresolutiontimingmeasurements,whilehigh granularity from scintillating plastic can be used to probe the spatial component of the particle shower. This setup works for excellent energy resolution and particle identification for REDTOP as it is crucial for a calorimeter to detect and identify the decay products of eta/eta-prime mesons. Measurements were collected on several ADRIANO2 prototypes between February to December 2022 to evaluate the detector performance. The key metrics extracted from the analyses are presented in this paper are the efficiencies and light-yi eld for various tile configurations. The measured values will be used as input parameters for improved REDTOP Montecarlo simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Farm Practice Typologies as a Strategy for Management-Relevant Land Use and Land Cover Mapping in the Great Lakes Region (Version 1) [Dataset]

Dataset overview and development This dataset provides spatially explicit agricultural land-use and land-management typologies developed for the Great Lakes Region (GLR) at the farm-parcel level. The typologies were designed to characterize not only the land-use and land-cover (LULC) associated with individual agricultural farm parcels, but also the land-management practices (LMPs), including irrigation, tile drainage, and conservation easements, occurring within those parcels and how these characteristics change through time. The dataset contains four related typology products: Annual integrated typology – describes the combined LULC and land-management characteristics for each farm parcel for individual years. LULC transition typology – describes the temporal pattern of LULC change for each farm parcel across the study period (2008-2023). LMP trend typology – describes the temporal pattern in the occurrence of LMPs for each farm parcel across the study period. Multi-year integrated typology – combines the LULC transition typology and LMP trend typology to provide an integrated characterization of long-term land-use and management patterns. Purpose of the dataset The purpose of these products is to provide a management-relevant integrated and consistent framework for evaluating the spatial and temporal organization of agricultural landscapes across the GLR. The resulting typologies can: support landscape-scale environmental and land-use analysis; provide spatial information relevant to land-management strategies, conservation planning, policy development, and program evaluation; characterize spatial patterns of agricultural land use and management; examine changes in agricultural landscapes through time; and identify persistent, transitional, and changing agricultural systems. Please refer to the README file provided in Files for more details.

Agriculture↗
DOE OSTI2025

Computer Vision Pipeline for Image Analysis for Freeze‐Fracture Electron Microscopy: Rosette Cellulose Synthase Complexes Case

In materials science, plant biology, agriculture, and environmental research, the automated analysis of high-magnification, complex microscopy images, such as those generated by freeze-fracture electron microscopy (FF-TEM), remains a critical challenge that limits the scalability of data interpretation. We present a deep learning computer vision pipeline for high-throughput detection and morphological characterization analysis of cellulose synthase complexes (CSCs, or rosettes) in FF-TEM images. The pipeline integrates preprocessing, detection, human-in-the-loop verification, and semantic segmentation to quantify features such as rosette diameter and inter-lobe spacing. The approach was trained and tested on a curated dataset of high-resolution FF-TEM micrographs of Physcomitrium patens, expanded via strategic tiling and augmentation to over 650 images. We compare YOLOv8 and YOLOv9 architectures and demonstrate that YOLOv9 achieves superior performance in both localization accuracy (mAP50-95 = 0.854) and inference speed. The resulting distributions revealed biological variability consistent with prior manual studies, validating the approach for high-throughput applications. Our results show that the pipeline achieves human-expert level accuracy while dramatically reducing analysis time, enabling scalable, reproducible structural characterization of intramembrane protein complexes. The pipeline is broadly applicable to other domains requiring precise interpretation of complex microscopy data and establishes a foundation for future artificial intelligence (AI)-assisted workflows in biological imaging.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

MatRIS: Addressing the Challenges for Portability and Heterogeneity Using Tasking for Matrix Decomposition (Cholesky)

The ubiquitous in-node heterogeneity of HPC and cloud computing platforms makes software portability and performance optimization extremely challenging. Described here, the MatRIS multilevel math library abstraction framework employs tasking to alleviate these difficulties. MatRIS includes the IRIS task-based runtime on the bottom level and exposes different layers of abstraction to render algorithms architecturally agnostic. MatRIS ensures the decomposition and creation of tasks that represent the necessary encapsulation of the optimized kernels from both vendor and open-source math libraries. Once built, MatRIS can select different combinations of accelerators at runtime, making it portable even on diverse heterogeneous architectures. By leveraging the IRIS runtime’s features for managing heterogeneity, MatRIS deploys algorithms that remove the need to specify orchestration and data transfer. This study describes how the serial task abstraction of a tiled Cholesky factorization is made portable and scalable in the case of multi-device and multi-vendor heterogeneity on a node with NVIDIA and AMD GPUs by using MatRIS. First, we demonstrate that Cholesky in MatRIS provides multi-GPU scalability that offers competitive performance versus cuSolverMG. Then, we present the challenges and opportunities for heterogeneous execution.

Monil, M. A. H.↗
DOE OSTI2024

Analysis of a Prototype Multi-Detector Fast-Neutron Radiography Panel

A multi-detector fast neutron radiography panel was built using the previous work on scalable neutron radiography using the IDEAS ROSSPAD readout module. A new aluminum housing was built to accommodate a large number of detectors tiled together. Additional changes to startup and processing code were made to operate the detector as one cohesive unit. Spatial resolution of the full panel using Cs-137 gammas was reported to be 0.42 line pairs per centimeter at 90% MTF and 2.09 line pairs per centimeter at 10% MTF. Here, three neutron radiographs generated using a Cf-252 fission neutron source were used to determine the spatial resolution of the panel for neutrons. The experiments had 90% MTF values of 0.24, 0.3, and 0.27 line pairs per centimeter and 10% MTF values of 1.30, 1.46, and 1.40 line pairs per centimeter. An example neutron radiograph was also used to prove that the radiography panel can perform true neutron radiography.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Vacuum commissioning and operation result after the KSTAR PFC upgrade

The first vacuum commissioning after the installation of new tungsten mono-block cassette divertor has been successfully conducted in KSTAR. The tungsten divertor has been installed in the lower divertor region to handle the high divertor heat loads up to 10 MW/m 2 . On the one hand, the plasma facing components except for the tungsten divertor in the KSTAR vacuum vessel still consists of graphite tiles. Thus, it was much more challenging to maintain high-quality vacuum condition mainly because of various possible impurity sources inside the vessel compared with previous experiment campaigns. In this paper, the detailed procedure for securing vacuum condition of the KSTAR tokamak after the installation of the new tungsten divertor is presented. The vacuum condition is also examined regarding the plasma start-up and the long-pulse high-performance quality.

KSTAR↗
DOE OSTI2024

Investigating the effect of B T direction on W source-to-core pathways during the SAS-VW campaign on DIII-D

Experiments using the V-shaped closed slot tungsten (W) coated SAS-VW divertor in DIII-D studied the effects of the BT direction on core contamination of eroded tungsten from a closed slot divertor configuration. Core W content is inferred using soft-X ray tomography (SXR) and vacuum ultraviolet spectroscopy (SPRED), while W divertor erosion is inferred from visible spectroscopy of W emission (400.9 nm) measured by in-slot filterscopes (filtered photo-multipliers). Post-mortem analysis from the campaign discovered tile misalignment leading to suspected pronounced leading-edge erosion in the unfavorable BT direction (ion B ⃗×∇B ⃗ drift away from divertor) likely not captured by diagnostics. However, empirical findings show up to ~2-3x larger core contamination in the favorable BT direction even considering no additional W erosion from leading edges. A “source-to-core efficiency factor” is derived to estimate the effects of leading-edge erosion and compare W contamination for two pairs of H-mode discharges in opposite BT directions. While having differing absolute parameters, similar core impurity density gradients suggest comparable core impurity transport. These results show that favorable BT may have stronger source-to-core pathways for W impurities sourced from the outer divertor region. Possible explanations could include the effects of E ⃗×B ⃗ drifts on W transport in the scrape-off-layer (SOL) as well as previously determined fast SOL inner target directed flows in favorable BT.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Innovative laser-based methods for monitoring fuel retention in ITER

This paper addresses the challenge of tritium inventory management in ITER and future fusion reactors, highlighting the importance of accurate tritium measurement and its spatial distribution within the vacuum vessel. Given ITER’s operational constraints, especially the limit on tritium retention, precise measurement is essential for both safety and regulatory compliance. To tackle these questions, the paper presents the T-monitor diagnostic system developed by Forschungszentrum Jülich, which uses Laser-Induced Desorption (LID) in combination with Diagnostic Residual Gas Analysis (DRGA) to measure hydrogen isotope concentrations on the surface of divertor tiles. The system integrates a high-power laser, advanced optical components, and a Fast Scanning Mirror Unit (FSMU) for accurate laser spot positioning with rapid response. Designed to measure in situ tritium retention, the diagnostic provides high-resolution spatial mapping, vital for evaluating detritiation strategies. The laser heating process increases the divertor surface temperature to 1600 K within the laser spot, promoting hydrogen isotope desorption. Accurate measurements require the precise control of laser parameters, including pulse duration and spot size, with a target relative accuracy of 20%. The optical design includes both in-vessel and ex-vessel components, such as durable high-reflectivity mirrors made of gold and copper, selected not only for their infrared performance but also for their transmission of visible wavelengths for observation purposes. To protect optical components from contamination, a pneumatic shutter is used.

Hydrogen isotopes↗
DOE OSTI2025

Tailoring coherent beam combined laser pulse trains for high peak and average power applications

Laser systems based on coherent beam combination (CBC) that rely on tiled pupil architecture intrinsically carry digital capabilities independently applicable to all three essential characteristics of a laser pulse: amplitude, phase and polarization. Those capabilities allow the far-field energy distribution to be flexibly tailored in real time. Operation in the femtosecond regime at high repetition rates gives access to a wide range of applications requiring both high peak and average powers. We address the task of independent peak versus average power adjustment needed for applications seeking to decouple nonlinear phenomena associated with GW peak power from the thermal load inherent to kW average power operation. The technical solutions proposed are presented in the framework of the Ecole Polytechnique XCAN CBC laser platform (61 independent channels) with an emphasis on thermal management measures implemented to ensure its nominal operation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

A Novel Solid Form of Erlotinib: Synthesis by Heterogeneous Complexation and Characterization by NMR Crystallography

We describe the synthesis of a novel complex of the anticancer "active pharmaceutical ingredient erlotinib (ERL) via heterogeneous nucleation on polished zinc tiles. The resulting product, ERL 2 ·ZnCl 2 , is characterized by single-crystal X-ray diffraction, multinuclear solid-state NMR (ssNMR) spectroscopy, and density functional theory (DFT) calculations. Also characterized are the hydrochloride salt (ERL·HCl) and monohydrate free base (ERL·H 2 O) forms of erlotinib. 13 C ssNMR spectroscopy is useful for site-by-site assignment and rapid fingerprinting, while also providing preliminary structural interpretations, such as the number of molecules in the asymmetric unit. 35 Cl ssNMR can readily differentiate between the chloride ions in ERL·HCl and the covalently bonded chlorine in ERL 2 ·ZnCl 2 . 15 N ssNMR proves to be critical here because of the large isotropic chemical shift differences between ERL·H 2 O, ERL·HCl, and ERL 2 ·ZnCl 2 . The 15 N chemical shift tensors are linked directly to differences in structure and bonding with the aid of DFT calculations. Together, these results demonstrate the utility of multinuclear NMR crystallography for the characterization of solid forms of APIs, especially when other analytical techniques face significant challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Modeling and Molecular Dynamics Simulation of a Packed and Intact Bacterial Microcompartment

Bacterial microcompartments (BMCs) are protein-bound organelles found in some bacteria which encapsulate enzymes for enhanced catalytic activity. These compartments spatially sequester enzymes within semipermeable shell proteins and are packed full of enzyme cargoes and metabolites as they fulfill their function. Coupling together recent SAXS and proteomics work, it is possible to develop molecular models for these microcompartments and interrogate enzyme and metabolite dynamics within. Our primary goal of this study is to quantify the permeability of metabolite glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP) across the BMC shell through classical molecular dynamics simulation. The Haliangium ochraceum model of BMC shell (PDB: 6MZX) was used to model an intact BMC of approximately 10 million atoms. Working at this scale presented its own challenges in managing large data sets, with multiple challenges and hardware advances discussed that facilitated this work. Over approximately 750 ns of aggregate simulation, we see multiple permeation events for these metabolites that were added at high concentration through the pores present within BMC shell tiles. When compared to independent permeability estimates for the same metabolites determined through replica exchange umbrella sampling simulations, the permeabilities varied by approximately 3 orders of magnitude. Regardless, the permeability coefficients for both G3P and DHAP are highly similar and very high, such that only very small concentration gradients can be maintained across the BMC shell between the cytosol and BMC interior. The large simulation systems also facilitated comparisons for molecular diffusivity in the crowded environment within the BMC shell. By our estimates, the viscosity within a packed BMC shell is at least 10-fold higher than it would be in neat solution and is the real driver for varying permeability estimates we obtained through simulation. These findings will be used as design inputs for future bioengineering efforts to make products from BMCs, highlighting how permeable BMC shells can be.

Diffusion↗
DOE OSTI2026

Toward Unified Autonomous Scattering Experiments: A Cross-Facility Case Study at ALS and PETRA III

Autonomous experiments rely on the integration of control, data acquisition, analysis, and decision-making frameworks. While such systems have been demonstrated at individual facilities, adapting them to additional instruments remains challenging due to differences in local infrastructure. We present a modular workflow that connects existing open-source tools for data access (Tiled), workflow orchestration (Prefect), analysis and visualization (pyFAI, Plotly Dash), and Gaussian-process-based adaptive sampling (gpCAM) into a unified framework for autonomous scattering experiments. The same configuration operates across two synchrotron beamlines (ALS 7.3.3 and PETRA III P03) with only minimal facility-specific adjustments, as shown in proof-of-concept demonstrations. This validates that a consistent design emphasizing modularity and shared interfaces can ease deployment across diverse experimental environments. The resulting framework provides a flexible foundation for extending autonomous control and analysis capabilities beyond a single beamline or instrument.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

ORBITaL-Net: A labeled training library for large-scale building feature extraction

Over the course of several years, nearly 1.5 million building outlines have been created from approximately 128,000 training tiles covering roughly 7,000 km 2 of very high-resolution multispectral overhead imagery, primarily dated between 2010 and 2020. This dataset, dubbed the Oak Ridge Building Image and TrAining Label Net (ORBITaL-Net), is designed for machine learning applications and is global in scope, with samples drawn from 72 countries across North America, South America, Africa, Europe, and Asia. ORBITaL-Net captures a great diversity in geographic setting, structural characteristics, land use (urban and rural), terrain, and imagery conditions. While the labeled building outlines are themselves valuable, the dataset’s true strength lies in the pairing of these labels with corresponding reference imagery, which is being released for open source use. Similar to SpaceNet and Replicable AI For Microplanning (ramp), this building outline dataset will allow the larger computer vision community from academia, government, and industry the opportunity to develop robust, scalable, and generalizable geospatial machine learning techniques. Unlike SpaceNet and ramp, which offer high resolution labels and imagery primarily for large urban cities, ORBITaL-Net is not focused on training samples from heavily populated areas but instead aims to capture the innate variability of conditions present in both the physical environment and imagery collections.

Geography↗
DOE OSTI2025

Steerable terahertz beams using surface waves on an active metasurface

The development of dynamic components for controlling wave fronts in the sub-terahertz region of the electromagnetic spectrum has emerged as a frontier research topic for many applications in sensing and communications. One approach which has attracted much attention involves the use of active metasurfaces, tiled arrays of sub-wavelength elements with properties that can be reconfigured via external actuation. In nearly all cases, these metasurfaces are employed as either transmissive or reflective elements, taking advantage of their strong and tunable interaction with free-space electromagnetic waves. These interactions can be significantly enhanced through the use of surface waves propagating parallel to the metasurface array, although very few studies have exploited this option. Here, we integrate a metasurface into the interior of a parallel-plate waveguide in a configuration explicitly designed to exploit this surface-wave geometry. We show that varying the electrical properties of the active metasurface changes the wave vector of the guided mode, and thereby alters the emission angle of radiation out-coupled through a leaky-wave slot aperture. These results, which are consistent with numerical simulations, represent a new approach to broadband beam steering suitable for the sub-terahertz spectral range.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Development of High-Granularity Dual-Readout Calorimetry with psec Timing

Dual-readout and particle flow algorithm (PFA) are technologies proposed for precise jet energy measurement in future colliders. While PFA requires highly granular calorimeters, dual-readout has mainly been used with fiber-based calorimeters that do not have highly segmented capabilities. It is still non-trivial to combine these two technologies in one calorimeter system because of the use of fibers in most of the dualreadout calorimeters, which is not compatible with the high granularity requirement of PFA technologies. The aim of this study is to develop a novel calorimetry that combines dual-readout and PFA by adopting a highly segmented tile-based configuration. This paper compares the improvement of energy resolution using dual-readout approach across several configurations of highly granular hadron calorimeters through simulation. Results indicate that setups with fine sampling and close placement of scintillators and Cherenkov detectors improve dual-readout performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

X-ray imaging and electron temperature evolution in laser-driven magnetic reconnection experiments at the national ignition facility

We present results from x-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated x-ray framing pinhole camera with micro-channel plate detector produces multiple images through various filters of the formation and evolution of both the plumes and current sheet. As the diagnostic integrates plasma self-emission along the line of sight, two-dimensional electron temperature maps ⟨Te⟩Y are constructed by taking the ratio of intensity of these images obtained with different filters. The plumes have a characteristic temperature ⟨Te⟩Y=240 ± 20 eV at 2 ns after the initial laser irradiation and exhibit a slow cooling up to 4 ns. The reconnection layer forms at 3 ns with a temperature ⟨Te⟩Y=280 ± 50 eV as the result of the collision of the plumes. The error bars of the plumes and current sheet temperatures separate at 4 ns, showing the heating of the current sheet from colder inflows. Using a semi-analytical model, we survey various heating mechanisms in the current sheet. We find that reconnection energy conversion would dominate at low density (ne≲7×1018 cm−3) and electron-ion collisional drag at high-density (≳1019 cm−3).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗