SEARCH · Search NASA

Results for “time-dependent scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Direct spectral measurements of midinfrared radiation from a laser wakefield accelerator

The formation of plasma waves during laser wakefield acceleration (LWFA) produces time-dependent frequency shifts in the driving laser pulse, extending its spectral content to the infrared. We present direct spectral measurements of multi-mJ infrared pulses from an LWFA. Experimental beam profile measurements and three-dimensional particle-in-cell simulations suggest high focusability of these pulses. Further, particle-in-cell simulations demonstrate that the measurement of side-scattered infrared radiation may serve as a diagnostic of plasma waves and the efficiency of spectral broadening during LWFA.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Characterizing Ultrafast Intersystem Crossing Pathways in Molecular Pt Dimers Using Time-Resolved Wide-Angle X-ray Scattering

Vibronic coupling between transition metal charge transfer states is a potential mechanism for enhancing the intersystem crossing (ISC) rate. Vibronic coupling-driven ISC has been observed in Pt(II) dimer complexes, where the trajectory across excited-state pathways is tuned by atomic displacements via Pt–Pt stretching vibrations. Time-resolved wide-angle X-ray scattering (TR-WAXS) was utilized to quantify the Pt–Pt contraction following metal–metal-to-ligand charge transfer (MMLCT) excitation in Pt dimers with different bridging ligands. Both complexes exhibit Pt–Pt bond formation with a decrease in Pt–Pt distance of ∼ 0.25 Å and coherent vibrational wavepackets (CVWPs) encoded in the Pt–Pt contraction of both dimers. However, the complexes exhibit different time-dependent evolution of their CVWPs. Analysis of interference patterns between different CVWPs is used to track the trajectory across the excited-state surfaces. Furthermore, this work demonstrates that the interference between CVWPs in ultrafast TR-WAXS encodes indirect information regarding electronic excited-states to reveal the Pt dimer bridge-dependent ISC mechanism.

Computational chemistry↗

DOE OSTI2023

Witnessing light-driven entanglement using time-resolved resonant inelastic X-ray scattering

Abstract Characterizing and controlling entanglement in quantum materials is crucial for the development of next-generation quantum technologies. However, defining a quantifiable figure of merit for entanglement in macroscopic solids is theoretically and experimentally challenging. At equilibrium the presence of entanglement can be diagnosed by extracting entanglement witnesses from spectroscopic observables and a nonequilibrium extension of this method could lead to the discovery of novel dynamical phenomena. Here, we propose a systematic approach to quantify the time-dependent quantum Fisher information and entanglement depth of transient states of quantum materials with time-resolved resonant inelastic x-ray scattering. Using a quarter-filled extended Hubbard model as an example, we benchmark the efficiency of this approach and predict a light-enhanced many-body entanglement due to the proximity to a phase boundary. Our work sets the stage for experimentally witnessing and controlling entanglement in light-driven quantum materials via ultrafast spectroscopic measurements.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Magneto-opto-phononic inverse Faraday effect

Nonlinear frequency conversion processes, such as optical rectification, difference-frequency generation, and sum-frequency generation, are fundamental for producing electromagnetic radiation at diverse frequencies. In this work, we demonstrate that coherently excited infrared-active phonons can act as transducers for generating nonlinear magnetizations through phonon-magnon interactions, analogous to nonlinear optical frequency conversion. We derive analytical solutions for the time-dependent magnetizations arising from the second-order response to the electric field component of an ultrashort laser pulse. These solutions enable us to define second-order nonlinear magneto-electric susceptibilities, which describe rectification, impulsive excitation, and sum-frequency excitation of coherent magnons. Our theoretical framework naturally incorporates the conventional magneto-optic and phonon inverse Faraday effects and predicts a hybrid magneto-opto-phononic inverse Faraday effect involving photon-phonon-magnon scattering. This work highlights nonlinear phononics as a pathway for controlling magnetization in solids.

Landau-Lifschitz-Gilbert equation↗

DOE OSTI2023

Cinematic reflectometry using QIKR, the quite intense kinetics reflectometer

The Quite Intense Kinetics Reflectometer (QIKR) will be a general-purpose, horizontal-sample-surface neutron reflectometer. Reflectometers measure the proportion of an incident probe beam reflected from a surface as a function of wavevector (momentum) transfer to infer the distribution and composition of matter near an interface. The unique scattering properties of neutrons make this technique especially useful in the study of soft matter, biomaterials, and materials used in energy storage. Exploiting the increased brilliance of the Spallation Neutron Source Second Target Station, QIKR will collect specular and off-specular reflectivity data faster than the best existing such machines. It will often be possible to collect complete specular reflectivity curves using a single instrument setting, enabling “cinematic” operation, wherein the user turns on the instrument and “films” the sample. Samples in time-dependent environments (e.g., temperature, electrochemical, or undergoing chemical alteration) will be observed in real time, in favorable cases with frame rates as fast as 1 Hz. Cinematic data acquisition promises to make time-dependent measurements routine, with time resolution specified during post-experiment data analysis. This capability will be deployed to observe such processes as in situ polymer diffusion, battery electrode charge–discharge cycles, hysteresis loops, and membrane protein insertion into lipid layers.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Description of the multinucleon transfer mechanism for Ca 48 + Pu 244 and Kr 86 + Pt 198 reactions in a quantal transport approach

Multinucleon transfer (MNT) reactions involving heavy projectile and target combinations stand as a promising method for synthesizing new neutron-rich exotic nuclei, which may not be possible using hot or cold fusion reactions or fragmentation. Exploring the mechanisms behind MNT reactions is essential and it requires a comprehensive theoretical framework that can explain the physical observables in these reactions. This work aims to show that the quantal diffusion approach based on the stochastic mean-field (SMF) theory is capable of explaining the reaction dynamics observed in MNT reactions. Primary product mass distributions in 48 Ca + 244 Pu reaction at E c.m. = 203.2 MeV and 86 Kr + 198 Pt reaction at E c.m. = 324.2 MeV are calculated and compared with the available experimental data. In this work, we utilize the time-dependent Hartree-Fock (TDHF) calculations to analyze the mean-field reaction dynamics computationally in the reactions 48 Ca + 244 Pu and 86 Kr + 198 Pt for a broad range of initial angular momenta. Quantal transport description based on the SMF approach is used to calculate quantal diffusion coefficients and mass variances in 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary products arising from quasifission reactions are described by joint probability distribution in the SMF approach and those arising from fusion-fission are estimated by using the statistical deexcitation code gemini + +. Mean values of charge and mass numbers, scattering angles of the primary reaction products, and the total kinetic energies after the collision are calculated within the TDHF framework for a broad range of initial angular momenta. Throughout all the collisions, drift toward the mass symmetry and large mass dispersion associated with this drift are observed. Here, the calculated primary fragment and mass distributions using the SMF approach successfully explain experimental observations for the 48 Ca + 244 Pu and 86 Kr + 198 Pt systems. The primary mass distributions, mean values of binary products, and mass dispersions are determined and results are compared with the available experimental data. The observed agreement between the experimental data and SMF results highlights the effectiveness of the quantal diffusion mechanism based on the SMF approach, which does not include any adjustable parameters other than standard parameters of Skyrme energy density functional.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Proton reconstruction with the TOTEM Roman pot detectors for high- β * LHC data

The TOTEM Roman pot detectors are used to reconstruct the transverse momentum of scattered protons and to estimate the transverse location of the primary interaction. This paper presents new methods of track reconstruction, measurements of strip-level detection efficiencies, cross-checks of the LHC beam optics, and detector alignment techniques, along with their application in the selection of signal collision events. The track reconstruction is performed by exploiting hit cluster information through a novel method using a common polygonal area in the intercept-slope plane. The technique is applied in the relative alignment of detector layers with μm precision. A tag-and-probe method is used to extract strip-level detection efficiencies. The alignment of the Roman pot system is performed through time-dependent adjustments, resulting in a position accuracy of 3 μm in the horizontal and 60 μm in the vertical directions. The goal is to provide an optimal reconstruction tool for central exclusive physics analyses based on the high-β* data-taking period at $\sqrt({s})$ = 13 TeV in 2018.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2026

Processing-Dependent Structure and Poroelasticity of Nafion in Liquid Water

Ionomers act as the solid polymer electrolyte membrane in many modern electrochemical devices, yet the role of their nanostructure in modulating the poroelastic response remains poorly understood, especially in liquid water, where few techniques can measure simultaneous transport-mechanical properties. Poroelastic Relaxation Indentation (PRI) is uniquely suited for measuring time-dependent transport-mechanical properties of porous solids, specifically hydraulic diffusivity, elastic modulus, Poisson’s ratio, and intrinsic permeability, for porous solids. While ionomers such as Nafion are not porous in the typical sense, Nafion has a nanophase-segregated structure that, when fully swollen in liquid water, behaves as a poroelastic solid with a coupled mechanical-transport response. Using a poroelastic framework, we investigate how casting and pretreatment of Nafion membranes alter their poroelastic response in liquid environments. We characterize both extruded and dispersion-cast Nafion membranes pretreated in water at 25 or 100 °C and relate the mechanical-transport properties to the ionomer structure via hydrophilic and intercrystalline domain spacing measured using Small-Angle X-ray Scattering (SAXS). At 25 °C, dispersion-cast membranes exhibit distinctly lower hydraulic diffusivity and intrinsic permeability than extruded membranes but with comparable mechanical properties. Pretreatment at 100 °C increases hydrophilic domain spacing, improving transport but at the expense of mechanical stiffness. Dispersion-cast membranes respond more strongly to pretreatment than extruded membranes. Using the Carman-Kozeny pore network model and the hydrophilic domain-spacing, we estimate the pore radius and tortuosity to show how pretreatment reduces structure-related tortuosity differences between dispersion-cast and extruded membranes. Here, in this work, we show that nanophase-segregated materials such as Nafion can be rigorously characterized using poroelasticity, resulting in physically meaningful transport-mechanical properties. Coupling PRI with SAXS provides insights into the nanostructural features that govern the coupled mechanical-transport response. By establishing PRI for a nanophase-segregated material, this approach opens avenues for this technique’s application in other hydrated polymeric materials not typically considered to be poroelastic.

Shen, Margaret [University of California, Berkeley↗

DOE OSTI2023

Kinetics of Shear-Induced Structural Ordering in Dense Colloids

The macroscopic rheological response of a colloidal solution is highly correlated with the local microscopic structure, as revealed by an in situ Rheo-SAXS experiment with a high temporal resolution. Oscillatory shear can induce a strain-controlled ordering-to-disorder transition, resulting in a shear-thickening process that is different from the normal shear-thickening behavior that is driven by hydrodynamics and particle friction. Here, we reveal that there is a complex time-dependent kinetics toward structural ordering under different applied strains. When the strain amplitude reaches a critical value that starts to induce disordering in the system, the pathway toward the dynamic equilibrium can also become highly non-monotonic. Within the same oscillatory cycle, there is a strong correlation of ordering with different phases of the oscillation, with the system oscillating between two dynamic metastable states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Mixed quantum/classical theory for rotational energy exchange in symmetric-top-rotor + linear-rotor collisions and a case study of the ND 3 + D 2 system

The extension of mixed quantum/classical theory (MQCT) to describe collisional energy transfer is developed for a symmetric-top-rotor + linear-rotor system and is applied to ND 3 + D 2 . State-to-state transition cross sections are computed in a broad energy range for all possible processes: when both ND 3 and D 2 molecules are excited or both are quenched, when one is excited while the other is quenched and vice versa, when the ND 3 state changes its parity while D 2 is excited or quenched, and when ND 3 is excited or quenched while D 2 remains in the same state, ground or excited. In all these processes the results of MQCT are found to approximately satisfy the principle of microscopic reversibility. For a set of sixteen state-to-state transitions available from the literature for a collision energy of 800 cm –1 the values of cross sections predicted by MQCT are within 8% of accurate full-quantum results. A useful time-dependent insight is obtained by monitoring the evolution of state populations along MQCT trajectories. It is shown that, if before the collision, D 2 is in its ground state, the excitation of ND 3 rotational states proceeds through a two-step mechanism in which the kinetic energy of molecule–molecule collision is first used to excite D 2 and only then is transferred to the excited rotational states of ND 3 . Finally, it is found that both potential coupling and Coriolis coupling play important roles in ND 3 + D 2 collisions.

inelastic cross-sections↗

DOE OSTI2023

Study of the GeV to TeV morphology of the γ Cygni SNR (G 78.2+2.1) with MAGIC and Fermi-LAT

Context: Diffusive shock acceleration (DSA) is the most promising mechanism that accelerates Galactic cosmic rays (CRs) in the shocks of supernova remnants (SNRs). It is based on particles scattering caused by turbulence ahead and behind the shock. The turbulence upstream is supposedly generated by the CRs, but this process is not well understood. The dominant mechanism may depend on the evolutionary state of the shock and can be studied via the CRs escaping upstream into the interstellar medium (ISM). Aims: Previous observations of the γ Cygni SNR showed a difference in morphology between GeV and TeV energies. Since this SNR has the right age and is at the evolutionary stage for a significant fraction of CRs to escape, our aim is to understand γ-ray emission in the vicinity of the γ Cygni SNR. Methods: We observed the region of the γ Cygni SNR with the MAGIC Imaging Atmospheric Cherenkov telescopes between 2015 May and 2017 September recording 87 h of good-quality data. Additionally, we analysed Fermi-LAT data to study the energy dependence of the morphology as well as the energy spectrum in the GeV to TeV range. The energy spectra and morphology were compared against theoretical predictions, which include a detailed derivation of the CR escape process and their γ-ray generation. Results: The MAGIC and Fermi-LAT data allowed us to identify three emission regions that can be associated with the SNR and that dominate at different energies. Our hadronic emission model accounts well for the morphology and energy spectrum of all source components. It constrains the time-dependence of the maximum energy of the CRs at the shock, the time-dependence of the level of turbulence, and the diffusion coefficient immediately outside the SNR shock. Further, while in agreement with the standard picture of DSA, the time-dependence of the maximum energy was found to be steeper than predicted, and the level of turbulence was found to change over the lifetime of the SNR.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Ultrafast x-ray imaging of coherently controlled molecular dynamics in real space and time

Coherent control aims to manipulate chemical processes on the latent length and timescales of atoms and bonds, scales that are intrinsic to molecular dynamics but not directly resolved by most experimental probes. As a result, existing coherent-control experiments, which overwhelmingly rely on spectroscopic observables, leave a crucial blind spot: the direct, real-space recovery of all atomic and molecular rearrangements in response to coherently controlled excitations. Here, we overcome this limitation by integrating a Tannor-Kosloff-Rice pump-control-probe scheme with ultrafast X-ray scattering to capture snapshots of the wavepacket motion in a benchmark molecular system. We demonstrate this by photoexciting diatomic iodine vapor with a visible pump pulse, selectively steering the wavepacket toward ground-state recombination or dissociative pathways with a time-delayed near-IR control pulse, and recording the dynamics with angstrom and femtosecond precision with an ultrashort hard X-ray probe pulse. By comparing these structural observations with numerical solutions of the time-dependent Schrödinger equation, we reveal how coherent control actively reshapes the molecular charge density distribution. Our results pave the way for leveraging structural feedback as a control handle and provide a fundamental microscopic visualization of quantum decoherence and energy redistribution at the atomic level.

Hopper, Thomas R. [SLAC National Accelerator Labor↗

DOE OSTI2025

𝐴𝑏 initio density-matrix approach to exciton coherence: Phonon scattering, Coulomb interactions, and radiative recombination

Relaxation processes following light excitation in semiconductors are key in materials-based quantum technology applications. These processes are broadly studied in atomically thin transition-metal dichalcogenides, quasi-two-dimensional excitonic semiconductors in which atomistic design allows for tunable excited-state properties, such as relaxation lifetimes and photoinduced coherence. In this work, we present a density-matrix-based approach to compute exciton relaxation within a many-body ab initio perspective. We expand our previously developed Lindblad density-matrix formalism to capture multichannel electron-hole pair relaxation processes, including phonon and Coulomb scattering as well as radiative recombination, and we study their effect on the time-resolved excited-state propagation. Using monolayer MoSe 2 as a prototypical example, we examine many-body effects on the time-dependent dynamics of photoactive excitations, exploring how the electron-hole pair interactions are reflected in variations of the excitation energy, spectral signature, and state coherence. In conclusion, our method supplies a detailed understanding of exciton relaxation mechanisms in realistic materials, offering a previously unexplored pathway to study excited-state dynamics in semiconductors from first principles.

Band structure methods↗

DOE OSTI2022

Role of non-Gaussian quantum fluctuations in neutrino entanglement

The flavor evolution of neutrinos in environments with large neutrino number densities is an open problem at the nexus of astrophysics and neutrino flavor physics. Among the many unanswered questions pertaining to this problem, it remains to be determined whether neutrino-neutrino coherent scattering can give rise to nontrivial quantum entanglement among neutrinos, and whether this can affect the flavor evolution in a meaningful way. To gain further insight into this question, here we study a simple system of two interacting neutrino beams and obtain the exact phase space explored by this system using the Husimi quasiprobability distribution. We observe that the entanglement induced by the coupling leads to strong delocalization in phase-space with largely non-Gaussian quantum fluctuations. The link between the neutrino entanglement and quantum fluctuations is illustrated using the one- and two-neutrino entropy. In addition, we propose an approximate phase-space method to describe the interacting neutrinos problem, where the exact evolution is replaced by a set of independent mean-field evolutions with a statistical sampling of the initial conditions. The phase-space approach provides a simple and accurate method to describe the gross features of the neutrino entanglement problem. Applications are shown using time-independent and time-dependent Hamiltonians in the nonadiabatic regime.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Witnessing Nonequilibrium Entanglement Dynamics in a Strongly Correlated Fermionic Chain

Many-body entanglement in condensed matter systems can be diagnosed from equilibrium response functions through the use of entanglement witnesses and operator-specific quantum bounds. Here, we investigate the applicability of this approach for detecting entangled states in quantum systems driven out of equilibrium. We use a multipartite entanglement witness, the quantum Fisher information, to study the dynamics of a paradigmatic fermion chain undergoing a time-dependent change of the Coulomb interaction. Our results show that the quantum Fisher information is able to witness distinct signatures of multipartite entanglement both near and far from equilibrium that are robust against decoherence. Here, we discuss implications of these findings for probing entanglement in light-driven quantum materials with time-resolved optical and x-ray scattering methods.

1-dimensional spin chains↗

DOE OSTI2025

First observations of solar halo gamma rays over a full solar cycle

We analyze 15 years of Fermi-LAT data and produce a detailed model of the Sun’s inverse-Compton scattering emission (solar halo), which is powered by interactions between ambient cosmic-ray electrons and positrons with sunlight. By developing a novel analysis method to analyze moving sources, we robustly detect the solar halo at energies between 31.6 MeV and 100 GeV, and angular extensions up to 45° from the Sun, providing new insight into spatial regions where there are no direct measurements of the Galactic cosmic-ray flux. The large statistical significance of our signal allows us to subdivide the data and provide the first 𝛾-ray probes into the time variation and azimuthal asymmetry of the solar modulation potential, finding time-dependent changes in solar modulation both parallel and perpendicular to the ecliptic plane. Our results are consistent with (but with independent uncertainties from) local cosmic-ray measurements, unlocking new probes into astrophysical processes near the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Analysis of picosecond coherent anti-Stokes Raman spectra for gas-phase diagnostics

We present a hybrid frequency- and time-domain solution, applicable to the case of picosecond coherent anti-Stokes Raman scattering (CARS), for gas-phase diagnostics. A solution has been derived based on both physical arguments and four-wave mixing equations for picosecond CARS, with pulse durations that are comparable to the dephasing time scale for gas-phase Raman coherence—a regime where commonly employed solutions for impulsive (femtosecond) or cw (nanosecond) pump/Stokes forcing are not strictly valid. We present the ps-CARS spectrum in the form of incoherent sums of CARS intensity spectra, calculated from the fundamental solution for impulsive pump/Stokes Raman preparation. The solution was examined for temperatures from 1000–3000 K, for four plausible experimental configurations, with laser pulse durations of 50–150 ps, and probe pulse delays from −20 to 240 ps. Approximations based on cw and impulsive pump/Stokes preparation to fit picosecond CARS spectra at atmospheric pressure were examined and the relative thermometric accuracy and computational cost of these approximations were quantified for the case of a zero nonresonant CARS contribution, and a nonresonant susceptibility equal to 10% of the Raman-resonant value at the N 2 bandhead. The nanosecond CARS approximation can result in large fitting errors when the probe pulse time delay is less than the probe pulse duration. Errors as large as 10–20% are observed in the fit temperatures for a zero picosecond probe pulse delay, when the nonresonant background is neglected, largely due to an inability of the time-independent cw model to capture transient frequency spread dephasing effects at the Q -branch bandhead. The inclusion of a nonresonant background results in 40–60% thermometry errors with a nanosecond model at a zero-probe delay. Time-dependent impulsive calculations used for femtosecond CARS better approximate the structure of the N 2 bandhead, reducing temperature fitting errors to 5–10% at a short probe pulse delay. The impulsive approximation results in errors up to 10% at intermediate probe pulse delays, where the coherence of the pump and probe pulses leads to multiple terms in the picosecond CARS solution. Both approximations improve as the probe pulse delay exceeds the probe duration. The nanosecond approximation results in a 2–3% error, while the impulsive model results in differences of less than 1% in some cases. Fits to experimental data obtained using short, ∼60ps pulses at a zero probe time delay and longer 100 ps pulses at a substantial 200 ps delay are presented with accuracies of 1–3% in the fit temperature.

Kearney, Sean P.↗

DOE OSTI2025

Time-dependent phenomena in correlated materials

Understanding time-dependent processes and light-matter interaction in strongly correlated materials, and the interplay between electronic, orbital, vibrational, and spin degrees of freedom, is a cornerstone of condensed matter. These mechanisms can be proven by measuring the response of the systems to time-dependent perturbations. The corresponding time scales are dictated by the way light couples to the different excitations, and how these excitations exchange energy and momentum. Our research advances our understanding of these processes, and the interpretation of different equilibrium and time-resolved spectroscopies. Our project encompasses two main themes: (i) developing and refining computational techniques to study non-equilibrium spectroscopies including non-perturbative effects and (ii) applications to non-equilibrium phenomena. We have developed a new computational approach that works directly in the time domain: by including all the degrees of freedom involved in the scattering process (e.g. electrons, photons, neutrons), we solve the time dependent problem: a faithful numerical simulation of the experiment. By measuring the energy and momentum of the outgoing particles, we can extract information about the energy and momentum absorbed by the system. Prior to our work, people attempting to model and calculate non-equilibrium spectral functions relied on a description of the scattering cross section based on a formulation in the frequency domain, a treatment that is extremely cumbersome and complex. Our technique works in and out of equilibrium and can reproduce spectra by several spectroscopic techniques, such as time-resolved photoemission, neutron scattering, Raman, X-ray spectroscopies (RIXS, Auger, XAS, XMCD), and, by not relying on analytical approximations, yields results that reveal novel overlooked transient mechanisms. These tools provide sorely needed intuition for understanding the phenomenology of strongly correlated materials and will help experimentalists in identifying signatures of relevant excitations in pump-probe experiments, such as those conducted in DOE supported facilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗