Search NASA⌕ Search

SEARCH · Search NASA

Results for “time-varying systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1961

Analytical Investigation of an Adaptive Flight-Control System Using a Sinusoidal Test Signal

An analytical study was made of an adaptive flight-control system which measures vehicle response to small-amplitude control-surface deflections produced by a sinusoidal test signal. Changes in the response to this signal are related to environmental changes,, and the system is continuously altered to maintain this response equal to a preselected value. The system is suitable for use in high-performance aircraft and missiles and requires only the addition of a signal generator and a logic circuit consisting of a filter-rectifier network and a comparator-integrator network to a basic command-control system. Thus, it presents a relatively simple approach to the problem. The effects on system performance of variation in flight condition, system-gain level, test-signal frequency, and sensor location are included in the analysis. Longitudinal control of a high-performance research aircraft over flight conditions ranging from landing approach to a Mach number of 5.8 at an altitude of 150,000 feet, and longitudinal control of a four-stage solid-fuel missile including the first bending mode over the atmospheric portion of a launch trajectory constituted the basis for the analytical study. Results of an analog-computer study using time-varying coefficients are presented to compare the control obtained with the adaptive system with-that obtained with a fixed-gain system during the atmospheric portion of a missile launch trajectory. The system has demonstrated an ability to maintain satisfactory vehicle control-system stability over wide ranges of environmental change.

Harris, Jack E.↗
NASA NTRS1972

Finite element appendage equations for hybrid coordinate dynamic analysis.

The increasingly common practice of idealizing a spacecraft as a collection of interconnected rigid bodies to some of which are attached linearly elastic flexible appendages leads to equations of motion expressed in terms of a combination of discrete coordinates describing the arbitrary rotational motions of the rigid bodies and distributed or modal coordinates describing the small, time-varying deformations of the appendages: such a formulation is said to employ a hybrid system of coordinates. In the present paper the existing literature is extended to provide hybrid coordinate equations of motion for a finite element model of a flexible appendage attached to a rigid base undergoing unrestricted motions and some of the advantages of the finite element approach are noted. Transformations to the modal coordinates appropriate for the general case are provided.

Likins, P. W.↗
NASA NTRS1973

Marshall system for aerospace system simulation (MARSYAS), user's manual

The capabilities of the Marshall system for aerospace system simulation (MARSYAS) and how to use it are described. MARSYAS is a software system that allows easy setup and control of the simulation of the dynamics of large physical systems on a digital computer. The physical systems are modeled in the form of block diagrams or equations. The blocks can have multiple inputs and multiple outputs, and they can be nested to form hierarchies. The block diagrams can contain transfer functions, nonlinear and logical functions, equations, analog computer elements and FORTRAN programs. The input format of the equations can be combinations of nonlinear, time-varying differential equations and algebraic equations in their original format. MARSYAS could also serve as a storage and retrieval system for models as a basis for a model configuration control system on a central time-shared computer. The outputs of the simulation system can be not only time-responses but also other analysis data such as frequency response, power spectrum and stability parameters. The MARSYAS translator is written in FORTRAN running on the Univac 1108 computer under the EXEC 8 operating system.

Ventre, A.↗
NASA NTRS1966

Launch booster gust alleviation.

Design of gust alleviation controls for boost phase flight of missiles incorporating random winds, time-varying missile dynamics, control problem, etc

WIND EFFECT↗
NASA NTRS1972

The application of optimal control techniques to advanced manned missions, volume 2

The hybrid optimization techique for attitude control design is described in detail. The technque is capable of optimizing an n-dimensional adjustable parameter vector, but a 1-dimensional vector is used as an example to explain the procedure. This permits an easier explanation as opposed to a multidimensional case. The procedure used to derive the perturbation equations of motion describing the 6-DOF shuttle ascent phase is presented. These equations were programmed on the EAI 8800 analog computer to describe the perturbations of the shuttle vehicle from a nominal zero lift trajectory due to wind disturbances. Included are the control system equations, trim equations, and wind angle of attack equations. Analog wiring diagrams, raw data and time-varying coefficients, and state variable responses during shuttle ascent are also considered.

Connor, C. L.↗
NASA NTRS1972

Study of the dynamics of orbital assemblies including interactions with geometrical appendages. Unified flexible spacecraft load program (LOAD): Final report and user's and operation manual

The addition of a dynamic loads computation capability to the Unified Flexible Spacecraft Simulation (UFSS) program is discussed. The added capability provides a means for determining the internal member loads due to the time-varying external loading conditions experienced by an orbiting spacecraft/cluster. The flexible bodies are modeled as a system of joints or nodes which are interconnected by weightless finite element members. All masses are lumped at the joints. The orthogonal functions used to describe the spatial deformation of the bodies are normally taken to be the orthonormal cantilever modes produced by a standard structural dynamics program.

Ness, D. J.↗
NASA NTRS1971

Optimal limited state variable feedback controllers for linear systems.

Optimized static and dynamic linear system compensator designs with a priori fixed dimensions are discussed. Expressions are derived to determine the parameters of these designs, including the fixed-gain output feedback, the time-varying output feedback, and time-invariant compensation. A relevant deterministic off-line optimization problem is formulated, and the properties of a solution to the problem are analyzed. A unified design philosophy for limited state-variable control problems of essentially deterministic systems is developed. The philosophy incorporates design constraints, a careful selection of performance criteria, and interpretation of the results.

Levine, W. S.↗
NASA NTRS1962

Application of Statistical Filter Theory to the Optimal Estimation of Position and Velocity on Board a Circumlunar Vehicle

Statistical filter theory is employed to develop a method for determining the best possible estimate of the position and velocity of a space vehicle in the midcourse phase of flight. Results of a computer simulation are given to illustrate the performance attainable. An on-board system is visualized in which the source of information is an arbitrary sequence of observations of space angles, corrupted by measurement errors. The scheme is in effect a dynamical time-varying filter, implemented by a digital computer, which processes the incoming data to compute an up-to-date optimal estimate of position and velocity.

Smith, Gerald L.↗
NASA NTRS1973

Transient characteristics of simple systems to modulated random noise.

Discussed are the mean-square response exceedance characteristics of a single-tuned system to amplitude modulated noise. The results bear on the accuracy of spectral estimates of nonstationary data, and subsequently, relate directly to the design, analysis, and testing of structural systems in environments as gusts, earthquakes, and ignition transients. For noise correlated as an exponentially damped cosine, the nonstationary response may exceed its stationary value by a factor in excess of two. A time-varying shaping filter explanation is offered for this behavior. For white noise, such exceedances do not occur.

Barnoski, R. L.↗
NASA NTRS1973

A sequence solution to the Fokker-Planck equation.

In this paper a new approach to nonlinear system analysis based on the Fokker-Planck equation is developed. The development begins as a modification of the parametrix method of partial differential equation theory and provides a sequence solution to the multidimensional time-varying Fokker-Planck equation. This sequence is simplified for the case where only a steady-state solution or a solution for the variance of a particular combination of states is desired. Equations are presented in a form suitable for obtaining numerical results using a digital computer.

Mayfield, W. W.↗
NASA NTRS1972

Some theoretical results in variable-rate optical communications.

Review of several variable-rate optical transmission schemes over an earth-to-space link which neutralize the effects of atmospheric turbulence. These adaptive laser communication systems exploit atmospheric reciprocity and the relatively long coherence time of the turbulence to monitor the time-varying state of the earth-to-space channel by using a satellite beacon and making appropriate measurements at the ground terminal. Optimal variable-rate strategy based on this channel-state information results is considerably improved performance in comparison with nonadaptive optical communication systems.

Levitt, B. K.↗
NASA NTRS1962

Application of Statistical Filter Theory to the Optimal Estimation of Position and Velocity on Board a Circumlunar Vehicle

Concepts from statistical filter theory are applied to the problem of in-flight determination of the position and velocity of a space vehicle for the purposes of midcourse guidance. The source of information is assumed to be an arbitrary sequence of measurements of any desired set of "observables" (e.g., space angles), the measurements being corrupted by additive errors so that the position and velocity are never known perfectly. A state transition approach is employed which leads naturally to a computational scheme that is readily implemented by a digital computer. The scheme can be regarded as a dynamical time-varying filter which weights the incoming observations in an optimal sense for use in producing an up-to-date optimal estimate of position and velocity. The advantages of the scheme are (1) it provides the best possible estimate (minimum error) based upon ensemble statistics of injection conditions and measurement errors; (2) it is extremely versatile, not requiring adherence to a predetermined observation schedule or reference trajectory; and (3) the computations are sufficiently simple to be practical in an on-board computer. A digital computer simulation of the proposed system is employed to demonstrate the feasibility of an all on-board system and to illustrate the performance attainable in a hypothetical physical situation.

SPACE VEHICLE↗
NASA NTRS1972

Study of the dynamics of orbital assemblies including interactions with geometrical appendages

The complete equations for the Unified Flexible Spacecraft Simulation (UFSS) program developed for the NASA/MSFC are presented. This general purpose simulation program is based on an algorithm which utilizes the digital computer to synthesize the dynamic and kinematic equations for a topological tree configuration of N interconnected bodies (the interconnected system of bodies forms no closed loops), the terminal members of which may be flexible. Necessary input quantities to the dynamic subroutine include the mass and inertia properties of each body and the flexible characteristics of each terminal member in addition to the specification, for each body, of those bodies to which it connects. This latter description involves the specification of the number of rotational degrees of freedom at each interconnection along with the associated position vectors defining these connections relative to the mass centers of the bodies involved. These position vectors can be input as time-varying functions if desired, thus affording the capability of studying the effects of time-varying hinge locations. Springs and dampers are assumed to act at each interconnection and structural damping in the flexible terminal members is included in the form of equivalent viscous damping.

Ness, D. J.↗
NASA NTRSDate not supplied

Battery Pack Shape Optimization using Transient Heat Conduction Coupled with Cell-Discharge Analysis

Battery electric systems exhibit significant time-dependence, especially when evaluated in the context of an aircraft mission profile with continually changing power demands. Additionally, when evaluating battery-powered aircraft concepts, it is important to accurately compute the temperature of the batteries and properly characterize the thermal response of the system. The temperature of the batteries has a significant impact on cell performance, in addition to safety considerations of maintaining battery temperatures below their operating limit. Because of these considerations, battery models for preliminary design and optimization of aircraft should include the capability to accurately compute the temperature distribution within the battery pack. Furthermore, battery pack designs should be as light-weight as possible to maximize the pack energy density, while also considering battery temperature limits. Here, we demonstrate a simultaneous trajectory and shape optimization of a battery pack concept, using a transient heat transfer finite element model coupled with a time-varying cell-discharge battery model to provide this capability. Including the transient finite element problem in the loop enables accurate temperatures that can be passed back to the cell discharge model, while the cell discharge model can supply the finite element model with time-varying heat boundary conditions to the finite element problem, further benefiting the fidelity of the thermal response of the batteries. We first demonstrate the coupling capability between the battery cell-discharge model and the transient finite-element heat transfer through an optimization which computes the optimal current profile for the battery pack while ensuring the battery temperatures remain below their operational limit. We then build on this optimization by adding shape optimization to the problem, which allows us to consider a composite objective function which also minimizes the mass of the battery pack, while also producing an optimal current discharge profile.

Optimization↗