Search NASA⌕ Search

SEARCH · Search NASA

Results for “vacancy diffusion kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Reaction Pathways over ZnZrO 2 -Based Catalysts and Catalytic Sorbents

Reactive capture and conversion (RCC) is a process intensification approach that integrates CO 2 capture and hydrogenation within a single unit, removing the CO 2 purification and storage steps of traditional process flow schemes. This alters the catalytic step from a traditional steady-state (SS) flow process to a transient capture and conversion cycle, which could lead to product distributions distinct from those observed in conventional SS experiments. Such differences are investigated in the combined capture and hydrogenation of carbon dioxide to methanol over a ZnZrO 2 catalyst and a ZnZrO 2 + NaNO 3 /Mg 3 AlO x catalytic sorbent (CS) using fixed-bed kinetic measurements, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady-state isotopic transient kinetic analysis-DRIFTS (SSITKA-DRIFTS). Under SS conditions, ZnZrO 2 produced methanol through sequential hydrogenation of HCOO* and CH 3 O* intermediates. On the contrary, CO was attributed primarily to CO 2 dissociation at oxygen vacancies, as supported by isotopic shifts and measured reaction orders. For the CS, isotopic switching experiments suggested that monodentate carbonate species (CO 3 2− , abbreviated as m-CO 3 2− ) act as active intermediates that can be hydrogenated to HCOO* and subsequently to CH 3 O. Under RCC conditions, in situ DRIFTS and isotopic experiments reveal that m-CO 3 2− species formed during the CO 2 capture step follow two competing routes upon H 2 exposure: (i) direct hydrogenation to methane on the sorbent domain or (ii) migration of m-CO 3 2− to the ZnZrO 2 domain, where they are hydrogenated to methanol through the HCOO pathway. Overall, RCC enables carbonate hydrogenation routes not observed under SS cofeed conditions. Thus, the reaction pathways and rates during RCC can be different from operation under conventional SS conditions, and the product distribution is determined here by competition between carbonate hydrogenation on sorbent sites and migration to ZnZrO 2 for methanol synthesis.

CCUS↗
DOE OSTI2020

Thermodynamic and kinetic properties of layered-CaCo2O4 for the Ca-ion batteries: a systematic first-principles study

One of the more promising directions in multivalent energy storage is systems based on Ca ion intercalation due to the potential for high voltage and capacity. A major challenge for enabling such a battery is to find cathode materials capable of fast ionic diffusion and reversible insertion of Ca ions. Here, on the basis of first-principles calculations, we have demonstrated that layered CaCo 2 O 4 exhibits favorable thermodynamic and kinetic properties that should enable topotactic Ca ion intercalation reactions. The P3-type layered Ca x Co 2 O 4 (0 < x < 1) with either of space groups of P 1 or P 2 1 / m are stable at multiple Ca concentrations and show a smooth voltage plateau higher than 3 V up to X = 0.5. The energy barriers of the single Ca ion migration are as low as 0.36 eV and 0.27 eV at the dilute and high vacancy concentration limits, respectively. Therefore, although varying the vacancy environments of the diffusing atom influences the migration barriers, they do not exceed 0.6 eV. Stochastic analysis of Ca hopping events performed by ab initio molecular dynamics (AIMD) simulation has shown that the migration barriers are lower than 0.32 eV. Therefore, the Ca diffusivity at room temperature extrapolated from the AIMD results is comparable to Li diffusivity (>10 -10 cm 2 s -1 ) in conventional Li cathode materials, suggesting the feasibility of layered Ca x Co 2 O 4 as multivalent cathode materials. Finally, the structural factors that enable fast diffusion are discussed.

25 ENERGY STORAGE↗
DOE OSTI2024

Defect Production and Microstructural Feature Impact for Radiation Damage in Additively Manufactured 316 Stainless Steel

This milestone presents multi-scale modeling research results for additively manufactured 316 stainless steel. A combination of phase field, cluster dynamics, molecular dynamics, and density functional theory with machine learning is used, allowing for predictions of radiation-driven microstructural evolution in additively manufactured 316 stainless steel over a range of temperatures, damage rates, neutron spectra, and microstructures, and supporting the development of combined ion and neutron irradiation for material qualification. Informed by ion irradiation and neutron irradiation results across the Advanced Materials and Manufacturing Technologies program, we investigate the unique aspects of radiation-driven microstructure evolution in additively manufactured 316 stainless steel. In particular, we focus on understanding the impact of carbon concentration (varying, for example, between the 316L and 316H standards) on void formation; radiation-induced segregation at dislocation cells and grain boundaries; and the evolution of dislocation loops and network dislocation populations. We find that the unique characteristics of the additively manufactured microstructures must be accounted for in understanding the evolution of dislocation populations under thermal and irradiation conditions, such as the variation in sink strengths arising due to the variation in dislocation density. We also find that the radiation-induced segregation of Cr and Ni to grain boundaries and cell walls differs due to the differences in their defect sink biases. We also find that increasing the Ni content can slow vacancy diffusion, which may provide a mechanism for the observed reduction in transient swelling rate for austenitic Fe-Cr-Ni alloys with increasing Ni content. In addition, ion irradiations have shown that increasing carbon content in 316 SS results in a larger population of smaller voids, suggesting reduced vacancy diffusion. Our results show that the carbon content of additively manufactured 316 SS has a significant impact on the migration rate of defect clusters. The presence of carbon atoms results in carbon-vacancy trapping, significantly reducing the diffusion rate of vacancies. Carbon atoms may also be trapped near the surface of a void, which may reduce void growth by trapping vacancies that diffuse toward the void.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Dislocation loop evolution in Kr-irradiated ThO 2

Here, the early stage of microstructural evolution of ThO 2 , under krypton irradiation at 600, 800, and 1000°C, was investigated using in situ transmission electron microscopy (TEM). Dislocation loops grew faster, whereas their number density decreased with increasing irradiation temperature. Loop density was found to decrease with ion dose. Interstitial dislocation loops, including Frank loops with Burgers vector of $\textit{a}/3\langle111\rangle$ and perfect loops with Burgers vector of $\textit{a}/2\langle110\rangle$, were determined by traditional TEM and atomic resolution–scanning TEM techniques. Atomistic and mesoscale level modeling are performed to interpret experimental observations. The migration energy barriers of defects in ThO 2 were calculated using density-functional theory. The energetics of different dislocation loop types were studied using molecular dynamics simulations. Loop density and diameter were analyzed using a kinetic rate theory model that considers stoichiometric loop evolution. This analysis reveals that loop growth is governed by the mobility of cation interstitials, whereas loop nucleation is determined by the mobility of anion defects. Lastly, a rate theory model was used to extract the diffusion coefficients of thorium interstitials, oxygen interstitials, and vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Uncovering the predictive pathways of lithium and sodium interchange in layered oxides

Ion exchange is a powerful method to access metastable materials with advanced functionalities for energy storage applications. However, high concentrations and unfavourably large excesses of lithium are always used for synthesizing lithium cathodes from parent sodium material, and the reaction pathways remain elusive. Here, using layered oxides as model materials, we demonstrate that vacancy level and its corresponding lithium preference are critical in determining the accessible and inaccessible ion exchange pathways. Taking advantage of the strong lithium preference at the right vacancy level, we establish predictive compositional and structural evolution at extremely dilute and low excess lithium based on the phase equilibrium between Li 0.94 CoO 2 and Na 0.48 CoO 2 . Such phase separation behaviour is general in both surface reaction-limited and diffusion-limited exchange conditions and is accomplished with the charge redistribution on transition metals. Guided by this understanding, we demonstrate the synthesis of Na y CoO 2 from the parent Li x CoO 2 and the synthesis of Li 0.94 CoO 2 from Na y CoO 2 at 1-1,000 Li/Na (molar ratio) with an electrochemical assisted ion exchange method by mitigating the kinetic barriers. Our study opens new opportunities for ion exchange in predictive synthesis and separation applications. Ion exchange is a powerful method to access metastable materials for energy storage, but identifying lithium and sodium interchange in layered oxides remains challenging. Using such model materials, vacancy level and corresponding lithium preference are shown to be crucial for ion exchange pathway accessibility.

25 ENERGY STORAGE↗
DOE OSTI2023

Reinforcement Learning-Guided Long-Timescale Simulation of Hydrogen Transport in Metals

Diffusion in alloys is an important class of atomic processes. However, atomistic simulations of diffusion in chemically complex solids are confronted with the timescale problem: the accessible simulation time is usually far shorter than that of experimental interest. In this work, long-timescale simulation methods are developed using reinforcement learning (RL) that extends simulation capability to match the duration of experimental interest. Two special limits, RL transition kinetics simulator (TKS) and RL low-energy states sampler (LSS), are implemented and explained in detail, while the meaning of general RL are also discussed. As a testbed, hydrogen diffusivity is computed using RL TKS in pure metals and a medium entropy alloy, CrCoNi, and compared with experiments. The algorithm can produce counter-intuitive hydrogen-vacancy cooperative motion. We also demonstrate that RL LSS can accelerate the sampling of low-energy configurations compared to the Metropolis–Hastings algorithm, using hydrogen migration to copper (111) surface as an example.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Kinetic interplay between chemical short-range order and grain boundaries in NiCoCr alloys under irradiation

Chemical short-range order (CSRO) and grain boundary (GB) engineering are routes to enhance radiation damage tolerance in alloys. Here, we reveal that CSRO and GB interact in a sink-strength-dependent manner under irradiation in NiCoCr. Near a weak sink (Σ3 GB), CSRO reduces defect cluster growth by slowing interstitial diffusion and enhancing vacancy-interstitial recombinations. In contrast, near strong sinks such as Σ5 GBs, CSRO and GB act competitively for interstitial accumulation but synergistically to suppress large stacking-fault tetrahedra growth via enhanced recombination. Such mechanistic duality underscores the need for coordinated control of CSRO stability and GB sink strength to enhance radiation damage tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomistic and cluster dynamics modeling of fission gas (Xe) diffusivity in TRISO fuel kernels

TRISO fuel particles are candidates for use in next generation reactors including gas reactors, fluoride salt-cooled high temperature reactors, and micro-reactors. The UCO fuel kernel consists of a uranium dioxide (UO) and uranium carbide mixture. The addition of UC helps suppress the formation of carbon monoxide gas, which led to failures during initial TRISO development. The addition of uranium carbide alters the chemistry of the UO kernel, which is known to influence performance parameters such as fission gas diffusivity, although the impact has not been quantified and no models exist that take the change in chemistry into account. Therefore, better understanding and more accurate models of the impact of chemistry on fuel performance are of high priority. In this paper, a first-principles density functional theory (DFT) and empirical potential based multi-scale study has been carried out to model the diffusivity of fission gas xenon (Xe) in UCO TRISO fuel kernels. The focus is on the UO component in the UCO fuel kernels, as that represents the largest volume fraction of the fuel kernels. The study relies on DFT and empirical potential calculations to determine Xe and point defect properties, which are then used in thermodynamic and kinetic models to predict diffusion for intrinsic conditions. In addition, the information is utilized in cluster dynamics simulations using the Centipede code to estimate the impact of irradiation on defect transport. Additionally, the presence of UC or UC in the UCO fuel kernels is shown to have a substantial impact on the UO non-stoichiometry by inducing oxygen vacancies and driving UO sub-stoichiometric, which causes much slower Xe diffusion in UCO compared to light water reactor UO fuel. The application of this model in fuel performance simulations using the Bison code is also demonstrated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Heteroatom anchoring to enhance electrochemical reversibility for high-voltage P2-type oxide cathodes of sodium-ion batteries

P2-type cathode has received extensive attention due to its faster Na+ diffusion and a high theoretical capacity in sodium-ion batteries (SIBs). However, undesirable phase transformations have induced dramatic capacity decay of SIBs during the cycling process. In this study, heteroatom anchoring through Cu/Mg dual doping is introduced into P2-type Na 0.67 Ni 0.33 Mn 0.67 O 2 cathode to enhance high-voltage electrochemical reversibility and modulate interfacial Na + kinetics. Further, the as-prepared Na 0.67 Ni 0.23 Mg 0.05 Cu 0.05 Mn 0.67 O 2 exhibits an outstanding capacity retention (83.4% after 2000 cycles at 10C) and rate performance (73 mAh g -1 at 10C, accounting for 58.7% of that at 0.1 C) over the voltage range of 2.5–4.4 V. Intensive explorations further manifest that the modified mechanism of dual-ion doping strategy is attributed to the synergistic coupling effect of a substantial change in Na occupancy distribution and an increase in oxygen vacancy buffer. Thus, the optimized cathode expedites Na + diffusion and reduces detrimental phase transformation, which favors high-rate performance and long-term cycling stability. This study develops a route to rationally design high-voltage cathode materials for SIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Helium bubble size effects on the surface morphological response of plasma-facing tungsten

Abstract We report a simulation study on the effects of helium (He) bubble size on the morphological evolution and pattern formation on the surface of tungsten used as a plasma-facing component (PFC) in nuclear fusion devices. We have carried out a systematic investigation based on self-consistent dynamical simulations of surface morphological evolution according to an atomistically-informed, 3D continuum-scale model that captures well the relevant length and time scales of surface nanostructure formation in PFC tungsten. The model accounts for PFC surface diffusion, driven by the biaxial compressive stress originating from the over-pressurized He bubbles in the near-surface region of PFC tungsten as a result of He plasma exposure, combined with the formation of self-interstitial atoms in tungsten that diffuse toward the PFC surface and the flux of surface adatoms generated as a result of surface vacancy-adatom pair formation upon He implantation; this transport of surface adatoms contributes to the anisotropic growth of surface nanostructural features due to the different rates of adatom diffusion along and across step edges of islands on the tungsten surface. Our detailed analysis reveals that varying the average He bubble size plays an important role in the PFC surface growth kinetics as well as the resulting surface topography. Specifically, we find that an increase in the He bubble size leads to a deceleration in the growth rate of the tungsten nanotendrils that emanate from the PFC surface. We also find that the separation distance between the resulting surface features increases with increasing He bubble size, as well as over time. This coarsening effect is a thermally activated process resulting in an accurate description of the temperature dependence of the average surface feature separation by an Arrhenius relation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-Innocent Role of the Ceria Support in Pd-Catalyzed Halophenol Hydrodehalogenation

The hydrodehalogenation (HDH) of halophenols is efficiently catalyzed by palladium supported on high-surface ceria (Pd/CeO2) under mild conditions (35 °C, 1 atm H2). A combination of NMR, diffuse reflectance infrared Fourier transform spectroscopy, Raman spectroscopy, and XPS studies and HDH kinetics of substituted halobenzenes suggests that the reaction proceeds mainly via a sequence of dissociative adsorption of phenolic hydroxyl onto the support, oxidative addition of the C–halogen bond to Pd, and reductive elimination to give phenol and hydrogen halide. The dissociative adsorption of the -OH group onto oxygen vacancies of the ceria support results in an electron-rich intermediate that facilitates the turnover-limiting reductive elimination step. In contrast, the direct pathway catalyzed by Pd without dissociative adsorption of the reactants on the support takes place at a slower rate. The mechanistic insights gained in this study were used to modify the reaction conditions for enabling HDH of recalcitrant halides such as fluorides and iodides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Measurement of Ehrlich-Schwoebel barrier contribution to the self-organized formation of ordered surface patterns on Ge(001)

Normal-incidence 1-keV Ar + ion bombardment leads to amorphization and ultrasmoothing of Ge at room temperature, but at elevated temperatures the Ge surface remains crystalline and is unstable to the formation of self-organized nanoscale patterns of ordered pyramid-shaped pits. The physical phenomenon distinguishing the high-temperature patterning from room-temperature ultrasmoothing is believed to be a surface instability due to the Ehrlich-Schwoebel barrier for diffusing vacancies and adatoms, which is not present on the amorphous material. This real-time grazing-incidence small-angle x-ray scattering study compares smoothing of a prepatterned Ge sample at room temperature with patterning of an initially flat Ge sample at an elevated temperature. In both experiments, when the nanoscale structures are relatively small in height, the average kinetics can be explained by a linear theory. Furthermore, the linear theory coefficients, indicating surface stability or instability, were extracted for both experiments. A comparison between the two measurements allows estimation of the contribution of the Ehrlich-Schwoebel barrier to the self-organized formation of ordered nanoscale patterns on crystalline Ge surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coupled cluster and dislocation dynamics modeling of microstructure evolution in irradiated materials

We develop here a coupled cluster and dislocation dynamics framework to study the microstructure evolution of irradiated materials. The framework not only accounts for the three dimensional diffusion of radiation-generated clusters, but also their interaction with dislocation networks and the resultant climb motion of discrete dislocations within finite crystals. The framework is solved with a superposition solution scheme, and is applied to investigate the evolution of the irradiation-induced dislocation loops in zirconium (Zr), considering the effects of various bias factors including the diffusion anisotropy difference (DAD) of interstitials and interstitial clusters, the dislocation bias of defects to discrete dislocation segments, and the production bias of defects from the radiation cascade. We find that the DAD is the most critical factor influencing the kinetics of the loop evolution in Zr, while the recombination/interaction of mobile defects can induce a strong spatial dependence of the loop evolution together with the DAD. Here, the method is also adopted to study the evolution of interstitial $\langle$a$\rangle$ and vacancy $\langle$c$\rangle$ dislocation loop ensembles consistent with the microstructure observed during irradiation-induced growth of Zr. Our findings not only reveal the spatial dependence of the size and ellipticity of the dislocation loops, but also suggest a limit on the anisotropy factor of interstitials to reproduce the co-growth of $\langle$a$\rangle$ and $\langle$c$\rangle$ loops in zirconium, in good agreement with experimental observations and other simulation results.

Bias factors↗
DOE OSTI2022

Phase transformation and growth mechanism of RF sputtered ferroelectric lead scandium tantalate (PbSc 0.5 Ta 0.5 O 3 ) films

Lead scandium tantalate (PbSc 0.5 Ta 0.5 O 3 , PST), an order/disorder ferroelectric, is a potential candidate for electrocaloric cooling and pyroelectric infrared (IR) detector. In this work, we report the phase transformation kinetics from two series of samples containing pure amorphous and mixture of amorphous and pyrochlore to desired perovskite phase using postdeposition rapid thermal processing (RTP) as well as growth mechanism of RF sputtered PST thin films using excess lead target on platinized silicon (Pt/Ti/SiO 2 /Si) substrates. We find that small changes in the temperature ramp have a large effect on the degree of perovskite conversion (ferroelectric phase), orientation (crystallographic texture), and long-range order parameter (< S 111 >). Through isothermal annealing, we obtained optimal perovskite phase at ≥700°C temperature. The phase transformation is characterized by spontaneous formation of center-type in-plane radial rosette-like structures revealed by scanning electron microscopy. The PST perovskite crystallites were found to coexist with pyrochlore in RTP annealed films. The volume fractions for perovskite and pyrochlore phase were obtained from the analysis of “rosettes” and respective X-ray diffraction intensities which helped to determine various parameters associated with phase kinetics (n, k, and activation energy, Ea) and accompanying growth. The effective activation energies of perovskite transition and growth were found to be 332 ± 11 kJ/mol (345 ± 11 kJ/mol) and 114 ± 10 kJ/mol (122 ± 10 kJ/mol), respectively, for pure amorphous only (and mixed amorphous and pyrochlore) phase following nucleation-growth controlled Avrami's equation. A linear growth rate (n~1) for the perovskite phase indicates predominant interface-controlled process and diffusion-limited phenomena thus inhibiting rosette size owing to reactant depletion and soft impingement at the grain boundary. However, the growth behavior is isotropic in two-dimension parallel to the plane of the substrates for both sample series. Furthermore, lead loss was severe for in-situ growth and RTP combined with conventional furnace annealing than those of RTP only films, which were closer to stoichiometric albeit with excess lead and marginal oxygen vacancies (V o ).

36 MATERIALS SCIENCE↗
DOE OSTI2026

Irradiation-Induced Grain Growth of gamma-Fe2O3 and Fe3O4 at Cryogenic Temperatures

This work reports the first observations of grain growth under irradiation of Fe oxides, specifically maghemite gamma-Fe2O3 and magnetite Fe3O4. The Fe oxide thin films were grown by Pulsed Laser Deposition and irradiated in-situ in a Transmission Electron Microscope at - 223°C using 1 MeV Kr2+ ions up to 8.75 x 10^19 ions/m^2 to study grain growth kinetics under irradiation. Grain growth at such low temperatures appears to follow kinetics that can be accounted for by the thermal spike model developed for metals in the literature. The corresponding activation energies were calculated and compared with other oxides. The results demonstrate that gamma-Fe2O3, despite its larger initial grain size, exhibits surprisingly fast grain growth in comparison with Fe3O4, likely due to the presence of iron vacancies in the crystal structure that facilitate faster atomic diffusion under irradiation.

Kretov, Dmitrii↗
DOE OSTI2021

Surface and Bulk Oxygen Kinetics of BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ Triple Conducting Electrode Materials

Triple ionic-electronic conductors have received much attention as electrode materials. In this work, the bulk characteristics of oxygen diffusion and surface exchange were determined for the triple-conducting BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ suite of samples. Y substitution increased the overall size of the lattice due to dopant ionic radius and the concomitant formation of oxygen vacancies. Oxygen permeation measurements exhibited a three-fold decrease in oxygen permeation flux with increasing Y substitution. The DC total conductivity exhibited a similar decrease with increasing Y substitution. These relatively small changes are coupled with an order of magnitude increase in surface exchange rates from Zr-doped to Y-doped samples as observed by conductivity relaxation experiments. The results indicate that Y-doping inhibits bulk O 2- conduction while improving the oxygen reduction surface reaction, suggesting better electrode performance for proton-conducting systems with greater Y substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Promotional Effect of ZnO and ZrO 2 in K-Doped Fe Catalysts for CO 2 Hydrogenation to Light Olefins

Promoters play a critical role in tuning the activity and selectivity of Fe catalysts in CO 2 hydrogenation to produce light olefins, which are key building blocks in the petrochemical industry. Herein, by a combined experimental and theoretical approach, we show that high and stable performance of Fe catalysts could be achieved by taking advantage of the promotional effect of both Zn and Zr. Structural characterization indicates that ZnO could improve the dispersion and reducibility of Fe oxides and facilitate the formation of active Fe carbide species, whereas ZrO 2 could stabilize the structure and catalytic performance, especially the selectivity of hydrocarbon products. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments suggest that carbonate, bicarbonate, formate, and methoxy are essential intermediates in the CO 2 hydrogenation to hydrocarbon products, including paraffins and olefins. The conversion kinetics of each intermediate species are dependent on the type of promoters as well as the phase structure of the active Fe species. DFT calculations revealed a strong correlation between the formation energy of surface oxygen vacancies and that of Fe carbide species in promoted Fe oxides, in accordance with experimental results. Moreover, the calculated energy profiles of CO 2 hydrogenation over different catalysts indicate that Zn could promote the activation of CO 2 and its transformation to the oxygenate intermediates, while Zr could facilitate the conversion of oxygenates to hydrocarbon precursors. Finally, the discrepancies in the evolution trend of various intermediate species on promoted Fe catalysts in the transient DRIFTS experiments can be rationalized by the differences in energy barriers of elementary or rate limiting steps.

CO2 conversion↗
DOE OSTI2020

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO 2 , Ce 0.92 Zr 0.08 O 2 , and Ce0.84Zr0.16O2 composed of 5–6 nm crystallites display Tm-CO 2 (the temperature at maximum CO 2 yield) at 383, 355, and 375°C under 10 vol.% O 2 /N 2 , respectively. Additionally, the size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O2- and O-) for soot oxidation. Thus, the activities of Ce 0.92 Zr 0.08 O 2 and Ce 0.84 Zr 0.16 O 2 in soot combustion are better than that of CeO2. Although oxygen vacancies promote the migration of lattice O 2- , the enriched surface Zr also inhibits the mobility of lattice O 2- . Therefore, the Tm-CO 2 of Ce 0.84 Zr 0.16 O 2 is higher than that of Ce 0.92 Zr 0.08 O 2 . Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.

54 ENVIRONMENTAL SCIENCES↗