Search NASA⌕ Search

SEARCH · Search NASA

Results for “virtual accelerator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Virtual Engineering: Python framework for engineering process design

Virtual Engineering (VE) is a Python software framework designed to accelerate the research and development of engineering processes that are fundamentally defined by multiple unit operations executed in series. VE supports a wide variety of different multi-physics models and integrates them to simulate a complete end-to-end process. To automate the execution of this model sequence, VE provides (i) a robust method to communicate between models, (ii) a high-level, user-friendly interface to set model parameters and enable optimization, and (iii) an overall model-agnostic approach that allows new computational units to be swapped in and out of workflows. Although the VE framework was developed to support the biochemical conversion of biomass to fuel, we have designed each component to easily accommodate new domains and unit models.

09 BIOMASS FUELS↗
NASA NTRS1975

Individual differences in susceptibility to motion sickness among six Skylab astronauts

Motion sickness was studied in Skylab crewmen. By mission-day 8 (MD 8), astronauts were virtually free of motion sickness symptoms after rotation and linear acceleration tests. None of the Skylab-II astronauts (crewmen 1-3) was motion sick aloft, but astronaut 6 of the Skylab-III crew experienced motion sickness within an hour after transition into orbit. All three astronauts (4-6) of Skylab-III experienced motion sickness in the workshop, where astronaut 6 was most susceptible and astronaut 4 least susceptible. The higher susceptibility of SL-III crewmen in the workshop, as compared with SL-II crewmen, may be attributable to the fact that they were based in the command module (CM) less than one-third as long as were SL-II astronauts. I.e., the unnatural movements permitted in the open spaces of the workshop entrained more complex interactions of unusual vestibular and visual stimuli than did those in the CM. The observed reduced liability to kinetosis relative to earth may be due to absence of the gravity stimulus to the otolith organs.

Graybiel, A.↗
NASA NTRS1988

Measurements and calculations of the Coulomb cross section for the production of direct electron pairs by energetic heavy nuclei in nuclear track emulsion

Measurements and theoretical predictions of the Coulomb cross section for the production of direct electron pairs by heavy ions in emulsion have been performed. Nuclear track emulsions were exposed to the 1.8 GeV/amu Fe-56 beam at the Lawrence Berkeley Laboratory bevalac and to the 60 and 200 GeV/amu O-16 and the 200 GeV/amu S-32 beam at the European Center for Nuclear Research Super Proton Synchrotron modified to accelerate heavy ions. The calculations combine the Weizsacker-Williams virtual quanta method applicable to the low-energy transfers and the Kelner-Kotov relativistic treatment for the high-energy transfers. Comparison of the measured total electron pair yield, the energy transfer distribution, and the emission angle distribution with theoretical predictions revealed a discrepancy in the frequency of occurrence of the low-energy pairs (less than or = 10 MeV). The microscope scanning criteria used to identify the direct electron pairs is described and efforts to improve the calculation of the cross section for pair production are also discussed.

Derrickson, J. H.↗
DOE OSTI2023

Virtual Engineering of Low-Temperature Conversion

In this work, we present the development of an overarching software framework and supporting multiphysics models to simulate the end-to-end process of biomass conversion. This virtual engineering (VE) software is designed with the goal of accelerating research and development and reducing risk for market-relevant biomass conversion processes. We currently support multiple models, computing paradigms, and fidelities representing the steps of feedstock pretreatment, enzymatic hydrolysis, and bioconversion. Although this VE approach was developed to support a biomass workflow, we have designed each component in a way that allows us to easily support new domains, unit models, and feedstocks. We begin by presenting the user-facing aspects of the VE software and highlight how simulated elements are defined and linked by VE functions. We then present an overview of the high-fidelity computational fluid dynamics (CFD) models developed to support our target domain before segueing into our efforts to develop accurate and fast surrogate models, capturing the salient outcomes from the CFD simulations in a significantly less computationally demanding manner. We then present how VE calculations interface with a commercial techno-economic analysis software, Aspen Plus. We conclude by presenting VE case studies that leverage these methods and discuss how our methods can be extended to support a wide variety of accelerated biofuel commercialization pathways in the future.

biofuel↗
DOE OSTI2020

Predictive Models and High-Performance Computing as Tools to Accelerate the Scaling-Up of New Bio-Based Fuels Workshop: Summary Report

This report summarizes the results of a virtual workshop sponsored by the Bioenergy Technologies Office held on June 9–11, 2020. The workshop discussed best practices for utilizing mathematical modeling tools across multiple scales to reduce technology uncertainty and accelerate scaling-up of biorefinery/chemical production equipment and optimize operations.

09 BIOMASS FUELS↗
DOE OSTI2023

Optimal decision-making in high-throughput virtual screening pipelines

Screening large pools of molecular candidates to identify those with specific design criteria or targeted properties is demanding in various science and engineering domains. While a high-throughput virtual screening (HTVS) pipeline can provide efficient means to achieving this goal, its design and operation often rely on experts' intuition, potentially resulting in suboptimal performance. In this paper, we fill this critical gap by presenting a systematic framework that can maximize the return on computational investment (ROCI) of such HTVS campaigns. Based on various scenarios, we empirically validate the proposed framework and demonstrate its potential to accelerate scientific discoveries through optimal computational campaigns, especially in the context of virtual screening.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

A Survey: Handling Irregularities in Neural Network Acceleration with FPGAs

In the last decade, Artificial Intelligence (AI) through Deep Neural Networks (DNNs) has penetrated virtually every aspect of science, technology, and business. Many types of DNNs have been and continue to be developed, including Convolutional Neural Networks (CNNs), Recurrent Neural Net- works (RNNs), and Graph Neural Networks (GNNs). The overall problem for all of these Neural Networks (NNs) is that their target applications generally pose stringent constraints on latency and throughput, while also having strict accuracy requirements. There have been many previous efforts in creating hardware to accelerate NNs. The problem designers face is that optimal NN models typically have significant irregularities, making them hardware-unfriendly. In this paper, we first define the problems in NN acceleration by characterizing common irregularities in NN processing into 4 types; then we summarize the existing works that handle the four types of irregularities efficiently using hardware, especially FPGAs; finally, we provide a new vision of next-generation FPGA-based NN acceleration: that the emerging heterogeneity in the next-generation FPGAs is the key to achieving higher performance.

Geng, Tong↗
DOE OSTI2025

VISIONARY: Virtual Intelligence System for Optimizing Novel Analytical Research Yields

VISIONARY is an AI system that accelerates energy materials discovery by automatically generating hypotheses about structure-property relationships. It analyzes patterns in materials data, identifies promising correlations, and proposes testable scientific hypotheses without human intervention. By streamlining this reasoning process, VISIONARY helps researchers efficiently identify candidate materials with desired properties, significantly speeding up the materials development pipeline for energy applications. During the project, we developed a standalone application. The application uses a combination of papers provided by the user and data collected from FutureHouse’s dataset to build an understanding of the background that the user wants to explore for the hypothesis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Optimization Of Real-time Capacity Allocation

ORCA is a modeling toolset to accelerate real-time control and optimization of digital twins, including virtual models of facilities, physical facilities, and interconnections to allow optimal control of physical facilities using virtual models. ORCA is enabled by INL's RAVEN and DeepLynx software codes.

Talbot, Paul [Idaho National Laboratory] (00000002↗
NASA NTRS1974

Augmented RIGS

The results of the Phase 2 Resonant Infrasonic Gauging System (RIGS) development program are presented. The program consisted of design, fabrication, and testing of an "augmented" RIGS concept. The RIGS is a gauging system capable of measuring propellant quantities in zero-g as well as under accelerated conditions. Except for hydrogen, it can be used to gauge virtually any propellant in liquid form, including cryogenics. The gage consists of a sensor unit which is attached to the propellant tank and an electronic control unit which may be positioned separately from the sensor. The control unit receives signals from the sensor as well as the propellant temperature measurement and the ullage gas pressure, and computes the propellant quantity in the tank.

Kaminskas, R. A.↗
NASA NTRS1973

Time-split finite-volume method for three-dimensional blunt-body flow

An efficient numerical method for calculating plane, axisymmetric, and fully three-dimensional blunt-body flow is presented. It is a second-order-accurate, time-dependent finite-volume procedure that solves the Euler equations in integral conservation-law form. These equations are written with respect to a Cartesian coordinate system in which an embedded mesh adjusts in time to the motion of the bow shock that is automatically captured as part of the weak solution. With such an adjusting mesh, oscillations in flow properties near the shock are shown to be virtually eliminated. The scheme uses a time-splitting concept that accelerates the convergence appreciably. Comparisons are made between computed and experimental results.

Rizzi, A. W.↗
DOE OSTI2020

Physical Sciences Vistas (Issue 3 2020)

In this issue, highlights of our outstanding R&D supporting the Laboratory’s nuclear security mission include the following. 1. The essential nuclear materials science contributions of MST’s Materials Properties Team to a range of Lab missions, operations, and initiatives. 2. Work in the Sigma Complex supporting NNSA’s Advanced Manufacturing Development milestones by members of Sigma Division and colleagues across the Laboratory and other NNSA sites. 3. Greg Dale’s role in the Lab’s molybdenum program and today as a technical lead on the Scorpius project. 4. Measurements that reveal the role thermal interfaces play in dynamic compression experiments. 5. The first-ever synthesis of an actinide framework, which offers opportunities for understanding these structures as potential radioactive waste forms and provides new models of actinide species transport in the environment. This issue also showcases, as part of our commitment to simultaneous excellence in mission operations and community relations, the successful high-hazard repair of the LANSCE accelerator, which resulted in a large team Laboratory Distinguished Performance Award, and a virtual Summer Physics Camp for Young Women that brought together participants from around the world, even as COVID kept them socially distant in their homes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Adaptive autoencoder latent space tuning for more robust machine learning beyond the training set for six-dimensional phase space diagnostics of a time-varying ultrafast electron-diffraction compact accelerator

In this work, we present a general adaptive latent space tuning approach for improving the robustness of machine learning tools with respect to time variation and distribution shift. We demonstrate our approach by developing an encoder-decoder convolutional neural network-based virtual 6D phase space diagnostic of charged particle beams in the HiRES ultrafast electron diffraction (UED) compact particle accelerator with uncertainty quantification. Our method utilizes model-independent adaptive feedback to tune a low dimensional 2D latent space representation of ~1 million dimensional objects which are the 15 unique 2D projections (x, y),...,(z, p z ) of the 6D phase space (x, y, z, p x , p y , p z ) of the charged particle beams. We demonstrate our method with numerical studies of short electron bunches utilizing experimentally measured UED input beam distributions.

43 PARTICLE ACCELERATORS↗
NASA NTRS1995

Dominant takeover regimes for genetic algorithms

The genetic algorithm (GA) is a machine-based optimization routine which connects evolutionary learning to natural genetic laws. The present work addresses the problem of obtaining the dominant takeover regimes in the GA dynamics. Estimated GA run times are computed for slow and fast convergence in the limits of high and low fitness ratios. Using Euler's device for obtaining partial sums in closed forms, the result relaxes the previously held requirements for long time limits. Analytical solution reveal that appropriately accelerated regimes can mark the ascendancy of the most fit solution. In virtually all cases, the weak (logarithmic) dependence of convergence time on problem size demonstrates the potential for the GA to solve large N-P complete problems.

Noever, David↗
DOE OSTI2022

I ntera C hem : Exploring Excited States in Virtual Reality with Ab Initio Interactive Molecular Dynamics

InteraChem is an ab initio interactive molecular dynamics (AI-IMD) visualizer that leverages recent advances in virtual reality hardware and software, as well as the graphical processing unit (GPU)-accelerated TeraChem electronic structure package, in order to render quantum chemistry in real time. We introduce the exploration of electronically excited states via AI-IMD using the floating occupation molecular orbital-complete active space configuration interaction method. The optimization tools in InteraChem enable identification of excited state minima as well as minimum energy conical intersections for further characterization of excited state chemistry in small- to medium-sized systems. We demonstrate that finite-temperature Hartree–Fock theory is an efficient method to perform ground state AI-IMD. InteraChem allows users to track electronic properties such as molecular orbitals and bond order in real time, resulting in an interactive visualization tool that aids in the interpretation of excited state chemistry data and makes quantum chemistry more accessible for both research and educational purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparison of nested geometry treatments within GPU-based Monte Carlo neutron transport simulations of fission reactors

Monte Carlo (MC) neutron transport provides detailed estimates of radiological quantities within fission reactors. This involves tracking individual neutrons through a computational geometry. CPU-based MC codes use multiple polymorphic tracker types with different tracking algorithms to exploit the repeated configurations of reactors, but virtual function calls have high overhead on the GPU. The Shift MC code was modified to support GPU-based tracking with three strategies: dynamic polymorphism with virtual functions, static polymorphism, and a single tracker type with tree-based acceleration. On the Frontier supercomputer these methods achieve 77.8%, 91.2%, and 83.4%, respectively, of the tracking rate obtained using a specialized tracker optimized for rectilinear-grid-based reactors. This indicates that all three methods are suitable for typical reactor problems in which tracking does not dominate runtime. The flexibility of the single tracker method is highlighted with a hexagonal-grid microreactor problem, performed without hexagonal-grid-specific tracking routines, providing a 2.19× speedup over CPU execution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

AlphaBuilding ResCommunity: A multi-agent virtual testbed for community-level load coordination

Training and validating algorithms in a simulation testbed can accelerate research and applications of optimal control of residential loads to improve energy flexibility and grid resilience. We developed an open-source simulation environment, AlphaBuilding ResCommunity, that can be used to train and validate algorithms to control a single thermostatically controlled load (TCL) or coordinate a group of TCLs. We used reduced-order models to simulate the thermodynamics of TCLs, and the parameter values were determined from the connected smart thermostat data of real households. The environment was built upon the standardized OpenAI Gym interface. Ancillary functions, such as retrieving the parameters and weather forecasts, are provided to facilitate control strategies that require predictive information. Compared with existing efforts, AlphaBuilding ResCommunity has three advantages: (1) more realistic model settings because the parameter values are identified from actual household operating data, and modelling and measurement uncertainty are considered; (2) passive thermal storage control; and (3) ease of use due to a simple software dependency and standardized interface. We demonstrated the applications of the environment by implementing a Kalman Filter and Model Predictive Control on a single TCL and a Priority-Stack-Based Control and Alternating Direction Method of Multipliers to coordinate multiple TCLs for load tracking.

Wang, Z↗