Search NASA⌕ Search

SEARCH · Search NASA

Results for “visualization techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Wind Tunnel Visualization of the Flow Over a Full-Scale F/A-18 Aircraft

The proposed paper presents flow visualization performed during experiments conducted on a full-scale F/A-18 aircraft in the 80- by 120-Foot Wind-Tunnel at NASA Ames Research Center. This investigation used both surface and off-surface flow visualization techniques to examine the flow field on the forebody, canopy, leading edge extensions (LEXs), and wings. The various techniques used to visualize the flow field were fluorescent tufts, flow cones treated with reflective material, smoke in combination with a laser light sheet, and a video imaging system. The flow visualization experiments were conducted over an angle of attack range from 20deg to 45deg and over a sideslip range from -10deg to 10deg. The results show regions of attached and separated flow on the forebody, canopy, and wings. Additionally, the vortical flow is clearly visible over the leading-edge extensions, canopy, and wings.

Lanser, Wendy R.↗
NASA NTRS1991

FAST: A multi-processed environment for visualization of computational fluid

Three dimensional, unsteady, multizoned fluid dynamics simulations over full scale aircraft is typical of problems being computed at NASA-Ames on CRAY2 and CRAY-YMP supercomputers. With multiple processor workstations available in the 10 to 30 Mflop range, it is felt that these new developments in scientific computing warrant a new approach to the design and implementation of analysis tools. These large, more complex problems create a need for new visualization techniques not possible with the existing software or systems available as of this time. These visualization techniques will change as the supercomputing environment, and hence the scientific methods used, evolve ever further. Visualization of computational aerodynamics require flexible, extensible, and adaptable software tools for performing analysis tasks. FAST (Flow Analysis Software Toolkit), an implementation of a software system for fluid mechanics analysis that is based on this approach is discussed.

Bancroft, Gordon V.↗
NASA NTRS2019

A Qualitative Review of Selected Infrared Flow Visualization Processing Techniques: Contrast Enhancement and Frequency Domain Analysis

The deployment and integration of high-sensitivity infrared cameras in a transonic wind tunnel test environment has resulted in a unique capability to image aerodynamic phenomena in real-time. Multi-camera infrared flow visualization data systems are now routinely utilized at the NASA Ames Unitary Plan Wind Tunnel. The small flow-induced temperature gradients on the surface of the wind tunnel test article coupled with the high bit-depth of the infrared camera sensor makes the processing of the image data critically important. An image processing routine must enhance features of interest with minimal artifacts. Additionally, the production wind tunnel test environment demands that these processed images are made available in a real-time, automatic fashion. Therefore, any image processing routine must be computationally economical and enhance the image data with minimal input from a human operator. The following seeks to qualitatively explore selected image processing techniques by assessing their effectiveness to resolve flow features on a wind tunnel test article. A multi-scale contrast enhancement technique is introduced as well as a new implementation of a multi-scale, non-interpolated adaptive histogram equalization. Finally, a novel method is introduced that demonstrates the ability to resolve flow features imaged on bare-steel test articles possessing low emissivity. This method merges frequency domain analysis with contrast enhancement and has the potential to extend the application of infrared flow-visualization within the wind tunnel test environment.

Infrared Imaging↗
NASA NTRS1991

FAST: A multi-processed environment for visualization of computational fluid dynamics

Three-dimensional, unsteady, multi-zoned fluid dynamics simulations over full scale aircraft are typical of the problems being investigated at NASA Ames' Numerical Aerodynamic Simulation (NAS) facility on CRAY2 and CRAY-YMP supercomputers. With multiple processor workstations available in the 10-30 Mflop range, we feel that these new developments in scientific computing warrant a new approach to the design and implementation of analysis tools. These larger, more complex problems create a need for new visualization techniques not possible with the existing software or systems available as of this writing. The visualization techniques will change as the supercomputing environment, and hence the scientific methods employed, evolves even further. The Flow Analysis Software Toolkit (FAST), an implementation of a software system for fluid mechanics analysis, is discussed.

Bancroft, Gordon V.↗
NASA NTRSDate not supplied

Self-Aligned Focusing Schlieren and OH Planar Laser-Induced Fluorescence Flow Visualization in a Dual-Mode Scramjet

Ahigh-speed self-aligned focusing schlieren (SAFS) system was used to visualize density gradients in and around the cavity flameholder of the combustor section of the University of Virginia Supersonic Combustion Facility (UVASCF). Images with this system were acquired at a framing rate of 110 kHz with no fuel injection, with fuel injection but no flame, and for fuel injection with combustion corresponding to a global equivalence ratio of 𝜙 = 0.18. Images with an air throttle in operation to modify the shock train location with fuel injection and with flame were also acquired. Simultaneous OH planar laser-induced fluorescence (PLIF) images were also acquired at a framing rate of 20 Hz. Results obtained with both visualization techniques are compared to one another to highlight how SAFS can complement more advanced flow visualization techniques and resolve dynamic behavior that may not otherwise be captured. Both proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD) analysis techniques are applied to the SAFS image sequences to identify coherent periodic structures for the runs with fuel injection and combustion.

Brett F Bathel↗
NASA NTRS1993

Development of visual programming techniques to integrate theoretical modeling into the scientific planning and instrument operations environment of ISTP

The goal of this project is to investigate the use of visualization software based on the visual programming and data-flow paradigms to meet the needs of the SPOF and through it the International Solar Terrestrial Physics (ISTP) science community. Specific needs we address include science planning, data interpretation, comparisons of data with simulation and model results, and data acquisition. Our accomplishments during the twelve month grant period are discussed below.

Goodrich, Charles C.↗
NASA NTRS1986

Multi-spark visualization of typical combustor flowfields

The interaction of a deflected jet with a confined tubular nonexpanded cross flow with swirl is investigated experimentally, applying a multiple-spark photographic visualization technique at jet/cross-flow velocity ratios 2, 4, and 6 and inlet-swirler vane angles 0, 45, and 70 deg in the test facility described by Lilley (1985). The visualization technique is described, and the results are presented graphically and briefly characterized. Phenomena observed include jet mixing and spreading, elevation of the vortex core, and reduction of the swirl strength in the lower part of the test section.

Lilley, D. G.↗
NASA NTRS1976

The interaction of unidirectional winds with an isolated barchan sand dune

Velocity profile measurements are determined on and around a barchan dune model inserted in the roughness layer on the tunnel floor. A theoretical investigation is made into the factors influencing the rate of sand flow around the dune. Flow visualization techniques are employed in the mapping of streamlines of flow on the dune's surface. Maps of erosion and deposition of sand are constructed for the barchan model, utilizing both flow visualization techniques and friction velocities calculated from the measured velocity profiles. The sediment budget found experimentally for the model is compared to predicted and observed results reported. The comparison shows fairly good agreement between the experimentally determined and predicted sediment budgets.

Gad-El-hak, M.↗
NASA NTRS1991

Flow visualization studies of the internal flow characteristics in a simulated mixed flow vectored thrust ASTOVL engine configuration

The characteristics of internal flowfields in a Mixed Flow Vectored Thrust (MFVT) propulsion system for Short Take Off and Vertical Landing (STOVL) fighter aircraft were investigated using flow visualization techniques. A highly parametric 14 percent scale transparent model was used to simulate the MFVT propulsion system. The working medium was water. The mixing between the fan and core flow was studied using flow visualization for a variety of geometrical and flow parameters including three bypass ratio variations. The flow visualization technique involves the use of laser light sheet for illumination and fluorescent dye or air bubbles as tracers. Results indicate the existence of a strong vortex flowfield in the hover mode of operation that is responsible for good mixing between the fan and core flows.

Saripalli, K. R.↗
NASA NTRS1989

The effects of stabilizing and destabilizing longitudinal curvature on the structure of turbulent, two-stream mixing layers

The construction and development of the multi-component traversing system and associated control hardware and software are presented. A hydrogen bubble/laser sheet flow visualization technique was developed to visually study the characteristics of the mixing layers. With this technique large-scale rollers arising from the Taylor-Gortler instability and its interaction with the primary Kelvin-Helmholtz structures can be studied.

Plesniak, Michael W.↗
NASA NTRS1996

Laser Sheet Flow Visualization Developed for Lewis' Icing Research Tunnel

A new flow-visualization technique has been developed for use in the NASA Lewis Research Center's Icing Research Tunnel (IRT). This technique uses a sheet of light shining across the wind tunnel to illuminate a mist of water droplets in the air and display any organized flow patterns. Since the IRT already has the special water spray system required for aircraft icing experiments, no special visualization seeding material is required. The system has been used to visualize the changes in tip and leading edge vortices caused by ice accretion. Because the IRT's icing spray is used as part of the visualization technique, changes in the flow patterns about a wing can be observed and measured during the ice accretion process.

Source record↗
NASA NTRS2001

In-Flight Flow Visualization Results of The F-106B With a Vortex Flap

Surface and off-surface flow visualization techniques were used to visualize the three-dimensional vortex flows on the F-106 aircraft with vortex flaps installed. Results at angles of attack between 9 deg to 18 deg and Mach numbers from 0.3 to 0.9 are presented. A smoke flow vapor screen technique was used to document leading-edge vortex paths and sizes, while an oil flow technique was employed to provide detailed information on reattachment and separation line locations and other flow details. Results were obtained for two vortex flap deflection angles, 30 deg and 40 deg. Flow visualization revealed the existence of a multiple vortex system that had not previously been seen in subscale tests or predicted for this configuration. The vortex flap generated a leading-edge vortex system that reattached near the flap hinge over a wide angle of attack range. In addition to the primary vortex, flow visualization revealed the presence of several distinct vortices which traced a path from the vortex flap and then over the wing.

Brandon, Jay M.↗
NASA NTRS2003

In-Flight Flow Visualization Results of the F-106B with a Vortex Flap

Surface and off-surface flow visualization techniques were used to visualize the three-dimensional vortex flows on the F-106 aircraft with vortex flaps installed. Results at angles of attack between 9 degrees to 18 degrees and Mach numbers from 0.3 to 0.9 are presented. A smoke flow vapor screen technique was used to document leading-edge vortex paths and sizes, while an oil flow technique was employed to provide detailed information on reattachment and separation line locations and other flow details. Results were obtained for two vortex flap deflection angles, 30 degrees and 40 degrees. Flow visualization revealed the existence of a multiple vortex system that had not previously been seen in subscale tests or predicted for this configuration. The vortex flap generated a leading-edge vortex system that reattached near the flap hinge over a wide angle of attack range. In addition to the primary vortex, flow visualization revealed the presence of several distinct vortices which traced a path from the vortex flap and then over the wing.

Brandon, Jay M.↗
NASA NTRS1991

In-flight flow visualization characteristics of the NASA F-18 high alpha research vehicle at high angles of attack

Surface and off-surface flow visualization techniques were used to visualize the 3-D separated flows on the NASA F-18 high alpha research vehicle at high angles of attack. Results near the alpha = 25 to 26 deg and alpha = 45 to 49 deg are presented. Both the forebody and leading edge extension (LEX) vortex cores and breakdown locations were visualized using smoke. Forebody and LEX vortex separation lines on the surface were defined using an emitted fluid technique. A laminar separation bubble was also detected on the nose cone using the emitted fluid technique and was similar to that observed in the wind tunnel test, but not as extensive. Regions of attached, separated, and vortical flow were noted on the wing and the leading edge flap using tufts and flow cones, and compared well with limited wind tunnel results.

Fisher, David F.↗
NASA NTRS1974

Wind tunnel investigation of simulated helicopter engine exhaust interacting with windstream

A wind tunnel investigation of the windstream-engine exhaust flow interaction on a light observation helicopter model has been conducted in the Langley V/STOL tunnel. The investigation utilized flow visualization techniques to determine the cause to determine the cause of exhaust shield overheating during cruise and to find a means of eliminating the problem. Exhaust flow attachment to the exhaust shield during cruise was found to cause the overheating. Several flow-altering devices were evaluated to find a suitable way to correct the problem. A flow deflector located on the model cowling upstream of the exhaust in addition to aerodynamic shield fairings provided the best solution. Also evaluated was heat transfer concept employing pin fins to cool future exhaust hardware. The primary flow visualization technique used in the investigation was a newly developed system employing neutrally buoyant helium-filled bubbles. The resultant flow patterns were recorded on motion picture film and on television magnetic tape.

Shaw, C. S.↗
NASA NTRSDate not supplied

Assessing Performance of Radar and Visual Sensing Techniques for Ground-To-Air Surveillance in Advanced Air Mobility

The safe integration of Unmanned Aircraft Vehicles (UAV) within the civil airspace is of great interest to NASA’s Advanced Air Mobility project, which envisions high density of operations in and around urban areas that include both UAV and AAM aircraft. To enable safe autonomous operations of both platforms, reliable airspace surveillance strategies must be designed and experimentally validated in relevant scenarios, where multiple small UAV operate flying in low altitude conditions. An example of such a scenario is described in this paper which provides performance assessment of various sensing strategies experimentally tested during flight campaigns with four UAV completing simultaneous missions from vertiports. Such campaigns are performed by the High Density Vertiplex subproject which assesses a prototype of Urban Air Mobility ecosystem. For the purposes of this work, the flights are observed from multiple sensing nodes each with radar and camera sensors. The visual detection and tracking algorithms achieved 96.1% to 99.9% average tracking coverage of the UAV above the horizon, reaching detection ranges larger than 1 kilometer for octocopter. Radar-based tracking shows a lower coverage mainly due to ground clutter removal challenges but provides comparable detection ranges and meter-level range accuracy.

Federica Vitiello↗