Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave period”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Chromospheric heating

The solar chromosphere is identified with the atmosphere inside magnetic flux tubes. Between the temperature minimum and the 7000 K level, the chromosphere in the bright points of the quiet sun is heated by large-amplitude, long-period, compressive waves with periods mainly between 2 and 4 minutes. These waves do not observe the cutoff condition according to which acoustic waves with periods longer than 3 minutes do not propagate vertically in the upper solar photosphere. It is concluded that the long-period waves probably supply all the energy required for the heating of the bright points in the quiet solar chromosphere.

Kalkofen, Wolfgang↗

Ionospheric disturbances caused by long period sound waves generated by Saturn-Apollo launches

Wavelike disturbances were observed in the ionosphere following several nuclear explosions in early 1960's. Supersonic shock waves within the atmosphere generated by large rockets can cause ionospheric electron density perturbations. A CW phase path Doppler array in the New York area was operated during the Saturn-Apollo 12 and 13 launches and recorded Doppler frequency fluctuations due to rocket launchings. Cross correlation and power spectral analyses of the phase path-path Doppler frequency variation records showed that the phase velocities of the signal arrivals were from south of the array with 700 - 800 m/sec corresponding to periods in the range of 2 to 4 minutes. Ionograms taken every 60 seconds from Wallops Islands showed clearly ionospheric disturbances due to rockets. The group velocities were estimated to be of the order of 450 m/sec 1 obtained from the earliest visible disturbances seen on CW phase path Doppler records and ionograms together with the rocket trajectory data.

Rao, G. L.↗

Nonlinear theory of electron neutralization waves in ions beams with dissipation

An analytical theory of nonlinear neutralization waves generated by injection of electrons from a grid in the direction of a homogeneous ion beam of uniform velocity and infinite extension is presented. The electrons are assumed to interact with the ions through the self-consistent space charge field and by strong collective interactions, while diffusion in the pressure gradient is disregarded (zero-temperature approximation). The associated nonlinear boundary-value problem is solved in closed form by means of a von Mises transformation. It is shown that the electron gas moves into the ion space in the form of a discontinuous neutralization wave, which exhibits a periodic field structure (incomplete neutralization). This periodic wave structure is damped out by intercomponent momentum transfer - i.e., after a few relaxation lengths a quasi-neutral plasma results.

Wilhelm, H. E.↗

SAR imaging of ocean waves - Theory

A SAR imaging integral for a rough surface is derived. Aspects of distributed target imaging and questions of ocean-wave imaging are considered. A description is presented of the results of analyses which are performed on aircraft and a spacecraft data in order to gain an understanding of the SAR imaging of ocean waves. The analyzed data illustrate the effect of radar resolution on the images of azimuthally traveling waves, the dependence of image distortion on the angle which the waves make with the radar flight path, and the dependence of the focusing parameter of the radar matched filter on the ocean wave period for azimuthally traveling waves. A dependence of ocean-wave modulation on significant wave height is also observed. The observed dependence of the modulations of azimuth waves on radar resolution is in contradiction to the hypothesis that these modulations are caused mainly by velocity bunching.

Jain, A.↗

Finite difference simulations of seismic scattering Implications for the propagation of short-period seismic waves in the crust and models of crustal heterogeneity

Synthetic seismographs that were obtained by the finite difference method are presently applied to the study of elastic and acoustic wave scattering in two-dimensional media with random spatial variations in seismic velocity. The seismograms are analyzed to determine the variation in travel times and waveforms across arrays of receivers. The random media with Gaussian and exponential correlation functions considered differ in the spectral falloff of their velocity fluctuations at wavelengths smaller than 2pi times the correlation distance. It is found that alternative models of crustal heterogeneity can be tested by improved measurements of the frequency dependence of the crustal Q at frequencies greater than about 1 Hz, assuming that scattering is responsible for most of the attenuation at such frequencies.

Frankel, A.↗

Wave attenuation in the marginal ice zone during LIMEX

The effect of ice cover on ocean-wave attenuation is investigated for waves under flexure in the marginal ice zone (MIZ) with SAR image spectra and the results of models. Directional wavenumber spectra are taken from the SAR image data, and the wave-attenuation rate is evaluated with SAR image spectra and by means of the model by Liu and Mollo-Christensen (1988). Eddy viscosity is described by means of dimensional analysis as a function of ice roughness and wave-induced velocity, and comparisons are made with the remotely sensed data. The model corrects the open-water model by introducing the effects of a continuous ice sheet, and turbulent eddy viscosity is shown to depend on ice thickness, floe sizes, significant wave height, and wave period. SAR and wave-buoy data support the trends described in the model results, and a characteristic rollover is noted in the model and experimental wave-attenuation rates at high wavenumbers.

Liu, Antony K.↗

WUS256: An Adjoint Waveform Tomography Model of the Crust and Upper Mantle of the Western United States for Improved Waveform Simulations

Abstract We report a new model (WUS256) of radially anisotropic seismic wavespeeds of the crust and upper mantle of the western United States (WUS) obtained from adjoint waveform tomography for the purpose of improving synthetic waveform fits to observed data. WUS256 is based on inversion of over 94,000 waveforms from 72 earthquakes recorded by nearly 3,400 stations. We started with the SPiRaL global model (Simmons et al., 2021, https://doi.org/10.1093/gji/ggab277 ) and waveforms in the period band of 50–120 s. We followed a conservative multiscale inversion approach with eight stages and 256 total inversion iterations which enabled monotonic misfit reduction to 20‐s minimum‐period waves. WUS256 relied on time‐frequency (TF) phase misfits and a trust region limited memory Broyden–Fletcher–Goldfarb–Shanno (L‐BFGS) optimization. Hessian‐vector products were used to qualitatively assess model resolution. Results indicate that WUS256 has good coverage of the continental regions to depths of about 150 km and is able to resolve features on lateral scales of about 200 km. We quantify waveform fits by the reduction in TF and normalized amplitude difference misfits between WUS256 and the SPiRaL starting model. WUS256 significantly improves waveform fits with misfit reduction 64% for both inversion and validation data sets compared to the SPiRaL starting model and shows even better fits compared to other models. Waveform fits illustrate that WUS256 reproduces body‐waves, fundamental mode surface waves as well as late arriving dispersed and/or scattered short period surface waves. The improvement in waveform fit indicates that WUS256 can be used to reproduce path effects on regional complete waveforms and moment tensor inversions.

58 GEOSCIENCES↗

Hydromagnetic waves and instabilities associated with cometary ion pickup - ICE observations

The hydromagnetic turbulence surrounding comet Giacobini-Zinner is characterized by two dominant components: large amplitude, linearly polarized waves with periods near 100 s and circularly polarized wave packets with periods near 3 s. The latter appear in association with variations in field magnitude produced by the long period waves. A third, commonly observed feature is identified, consisting of a partial rotation of the magnetic field (a hook-like structure) which also appears to be triggered by the long period waves. The possibility that the long period waves are generated by the pickup of freshly ionized cometary neutrals has been investigated. A resonant instability identified by Wu and Davidson (1972) appears able to account for the long period waves in terms of the pickup of cometary ions of the water group. Application of the theory also indicates that the growth rate of proton cyclotron waves, as a consequence of hydrogen ion pickup, is somewhat lower, due to both higher neutral velocities and longer ionization times.

Tsurutani, B. T.↗

Global wave energy resource classification system for regional energy planning and project development

Efforts to streamline and codify wave energy resource characterization and assessment for regional energy planning and wave energy converter (WEC) project development have motivated the recent development of resource classification systems. Given the unique interplay between WEC absorption and resource attributes, viz, available wave power frequency, directionality, and seasonality, various consensus resource classification metrics have been introduced. However, the main international standards body for the wave energy industry has not reached consensus on a wave energy resource classification system designed with clear goals to facilitate resource assessment, regional energy planning, project site selection, project feasibility studies, and selection of WEC concepts or archetypes that are most suitable for a given wave energy climate. In this work, a primary consideration of wave energy generation is the available energy that can be captured by WECs with different resonant frequency and directional bandwidths. Therefore, the proposed classification system considers combinations of three different wave power classifications: the total wave power, the frequency-constrained wave power, and the frequency-directionally constrained wave power. The dominant wave period bands containing the most wave power are sub-classification parameters that provide useful information for designing frequency and directionally constrained WECs. The bulk of the global wave energy resource is divided into just 22 resource classes representing distinct wave energy climates that could serve as a common language and reference framework for wave energy resource assessment if codified within international standards.

16 TIDAL AND WAVE POWER↗

A global ensemble of ocean wave climate projections from CMIP5-driven models

This dataset, produced through the Coordinated Ocean Wave Climate Project (COWCLIP) phase 2, represents the first coordinated multivariate ensemble of 21st Century global wind-wave climate projections available (henceforth COWCLIP2.0). COWCLIP2.0 comprises general and extreme statistics of significant wave height (H S ), mean wave period (T m ), and mean wave direction (θ m ) computed over time-slices 1979–2004 and 2081–2100, at different frequency resolutions (monthly, seasonally and annually). The full ensemble comprising 155 global wave climate simulations is obtained from ten CMIP5-based state-of-the-art wave climate studies and provides data derived from alternative wind-wave downscaling methods, and different climate-model forcing and future emissions scenarios. The data has been produced, and processed, under a specific framework for consistency and quality, and follows CMIP5 Data Reference Syntax, Directory structures, and Metadata requirements. Technical comparison of model skill against 26 years of global satellite measurements of significant wave height has been undertaken at global and regional scales. This new dataset provides support for future broad scale coastal hazard and vulnerability assessments and climate adaptation studies in many offshore and coastal engineering applications.

Science & Technology - Other Topics↗

Chromospheric heating and metal deficiency in cool giants: Theoretical results versus observations

We compute acoustic shock wave-heated chromosphere models for moderately cool giant stars which differ greatly in metallicity. Subsequently, we simulate the emerging Mg II k lines assuming partial redistribution. The initial acoustic energy fluxes and the wave periods are taken from acoustic wave generation calculations based on traditional convection zone models. We find that the Mg II and Ca II core emissions are close to the observed basal flux limits which are common for giants and dwarfs. In addition, we find that the Mg II core emission is independent of the metallicity, in agreement with observations. We argue that these results should be considered as further evidence that the basal flux limits are indeed due to acoustic shock heating. The acoustic heating mechanism seems to be dominant in all nonmagnetic nonpulsating late-type stars.

Cuntz, M.↗

WEC-Sim Modeling of Laminar Scientific's Patented Seesaw Wave Energy Converter: Preprint

Laminar Scientific's patented seesaw wave energy converter was modeled in WEC-Sim to predict performance. The device operates by utilizing ocean surface waves to rotate a truss in pitch about a pivot. The pivot is located at the top of two pylons, which are embedded in the seafloor. The seesaw has a float on either end, and the buoyancy forces from each float cause the system to rise or fall with passing waves. Device performance relies upon seesaw length and ocean wavelength creating an antiphase effect. The seesaw truss has an adjustable length intended to achieve this effect. The operation method enforces a narrow band of wavelengths which induce the largest rotational motion from the device. The hydrodynamic analysis of the device was performed using Capytaine, and the results confirmed that the device operates best in a narrow frequency band. Four float-to-float spacing cases and three pylon radii were examined. The hydrodynamic results indicate a match between the model and the physical expectations for the device, and that varying the pylon radii by 0.1-m increments for three instances creates minimal changes in hydrodynamic properties. Power matrices for three float spacing cases of the device were simulated with Joint North Sea Wave Project spectra waves and optimal power take-off damping in WEC-Sim. The maximum average power production for the 15-m spacing case was 14.1 kW with a 5.0-s peak wave period and 4-m significant wave heights. Plots of capture-width ratios indicated that the device performance was linear and confirmed that the device is optimal in a narrow frequency band. The maximum percentage of the available wave power produced by the 15-m device was approximately 16%. Simulations of the device in regular waves were used to produce plots of average power compared to a ratio of float spacing to wavelength. These plots indicate that the power production is maximized at a ratio of 0.5, and further confirm that the device has a narrow frequency response. The device was simulated at an example field location, where the device produced an annual average power rating of 1.6 kW given an average omnidirectional wave climate of 10.3 kW m-1 and an optimal, linearized power take-off model. While the maximum predicted device performance is reliant upon a narrow band of wave frequencies, the conducted analysis provides an opportunity to improve device design prior to prototyping and testing. Modifying the design to respond to a broader frequency range would improve device performance.

numerical modeling↗

Effects of wave-induced diffusion on thermospheric acoustic-gravity waves

When wave-induced diffusion is included in the equations governing acoustic-gravity wave propagation in an atmosphere in diffusive equilibrium, it is found that phase and amplitude relationships between the density fluctuations of individual atmospheric constituents agree with AE-C satellite observations of wavelike structure only over a narrow range of wave periods. For a 400-km horizotal wavelength, the observations are consistent with internal gravity waves of periods 11.5-22 minutes propagating at phase speeds 300-600 m/sec.

Del Genio, A. D.↗

Study of Ardmore, Oklahoma storm clouds. I - Convective storm cloud initiation and development based on the remote sensing gravity-wave-induced convection. II - Satellite infrared remote sensing and numerical simulation

The role of gravity waves is discussed with respect to the vertical velocity of convection. Specific attention is given to wave-induced convection which contributes to the fractions of formation and the development of severe convective storms. Large-amplitude gravity waves and convective instability were investigated in storm clouds above Ardmore, Oklahoma. Rapid-scan satellite imagery and radar summaries provide evidence of water-vapor condensation related to convection which is introduced by gravity waves. Gravity wave periods of 35 minutes are found to initiate weak convection, which can be intensified by gravity waves with periods of 20 minutes. The convective motion reaches a maximum about one hour before funnel clouds develop. Other mechanisms which contribute to convective motion are considered, but gravity waves are the major contributor to the initiation, formation, and development of mesoscale storm clouds. Cloud modeling based on satellite imagery and sounding data showed that by overshooting cloud tops that penetrated the tropopause, storm clouds mature; that these clouds collapse about 9 minutes before the touchdown of tornadoes; and that cloud tops collapse at a high rate about 6 minutes before tornadoes lift off.

Hung, R. J.↗

Dominant Wave Energy Systems and Conditional Wave Resource Characterization for Coastal Waters of the United States

Opportunities and constraints for wave energy conversion technologies and projects are evaluated by identifying and characterizing the dominant wave energy systems for United States (US) coastal waters using marginal and joint distributions of the wave energy in terms of the peak period, wave direction, and month. These distributions are computed using partitioned wave parameters generated from a 30 year WaveWatch III model hindcast, and regionally averaged to identify the dominant wave systems contributing to the total annual available energy ( A A E ) for eleven distinct US wave energy climate regions. These dominant wave systems are linked to the wind systems driving their generation and propagation. In addition, conditional resource parameters characterizing peak period spread, directional spread, and seasonal variability, which consider dependencies of the peak period, direction, and month, are introduced to augment characterization methods recommended by international standards. These conditional resource parameters reveal information that supports project planning, conceptual design, and operation and maintenance. The present study shows that wave energy resources for the United States are dominated by long-period North Pacific swells (Alaska, West Coast, Hawaii), short-period trade winds and nor’easter swells (East Coast, Puerto Rico), and wind seas (Gulf of Mexico). Seasonality, peak period spread, and directional spread of these dominant wave systems are characterized to assess regional opportunities and constraints for wave energy conversion technologies targeting the dominant wave systems.

16 TIDAL AND WAVE POWER↗

Periodic variations stratospheric temperature from 20-65 km at 80 deg N to 30 deg S

Results for a seasonally varying diurnal tide in temperature at Churchill are presented, and possible significant aliasing of longer period waves by this tide is discussed. A diurnal tide whose amplitude and phase are coherent throughout the year is found to have little effect on periodic amplitudes other than the long-term mean, because most rocketsonde observations are taken near the same local time each day. Errors in periodic components arising from lack of solar radiation corrections are found to be largest for the long-term mean with a small influence noted in the annual wave's amplitude. Spatial variations of the amplitudes and phases of long-period waves are examined through the use of height-latitude sections, 20-65 km, at 80 deg N to 30 deg S. The quasi-biennial oscillation and semiannual waves have tropical maxima of 2 and 3C near 30 and 40 km respectively. The annual wave's maximum is over 22C near 45 km at 70 deg N and the terannual wave's maximum is over 6C near 55 km at 80 deg N. The semiannual wave has to polar maxima: 7C near 75 deg N at 32 km and 3C above 60 km north of 35 deg N.

Nastrom, G. D.↗