Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Modulational instability of lower hybrid waves at the magnetopause

The role of lower bybrid waesat the magnetopause is reexamined. It is found that for the maximum observed wave power, the lower hybrid waves are unstable to a modulational instability on the magnetosheath side of the magnetopause. The modulational instabitlity leads to localized field structures oriented predominantly along the magnetic field. Such patchy lower hybrid turbulence has been observed by some spacecraft. As a result of the large T(sub i)/T(sub e) ratio, the waves saturate by ion heating; as a result, unlike other settings (e.g. comets, critical ionization phenomena) energetic electrons are not expected. The stochasitc electron transport in the presence of such turbulence is analyzed and results in strongly anistropic electron diffusion, with the dominant direction across the magnetic field. The diffusion rate exceeds significantly that expected from quasi-linear considerations and, for magnetospause parameters, also exceeds the rate discussed by Sonnerup (1980).

Shapiro, V. D.↗

The Correlation Radiometer - A New Application in MM-Wave Total Power Radiometry

We describe the design and performance of a 180 GHz correlation radiometer suitable for remote sensing. The radiometer provides continuous comparisons between a the observed signal and a reference load to provide stable radiometric baselines. The radiometer was assembled and tested using parts from the GeoSTAR-II instrument and is fully compatible with operation in a synthetic aperture radiometer or as a standalone technology for use in microwave sounding and imaging. This new radiometer was tested over several days easily demonstrating the required 6 hour stability requirement for observations of mean brightness temperature for a geostationary instrument.

Monolithic Microwave Integrated Circuit (MMIC)↗

A 20 kHz power oscillator

Circuit providing stable sine wave power up to 10 W supplies small amounts of power at frequency other than 60 Hz. Circuit has Wien bridge oscillator which uses operational amplifier to feed power amplifier stage. Power amplifier stage uses booster amplifier and two discrete transistors for power output.

Sturman, J. C.↗

Ion Diffusive Transport Across the Separatrix Between the Low-Latitude Mantle and the Plasma Sheet By Kinetic Alfvén Waves: MMS Observation

To understand the entry of the cool low‐latitude mantle ions into the tail plasma sheet near the flanks under persistent interplanetary magnetic field B y , we evaluate the role of the cross‐field diffusive transport by kinetic Alfvén waves (KAWs) by investigating two events observed by multiscale (MMS) spacecraft. Around the separatrix between the open and closed field‐line regions, a two‐component mixing of hot plasma sheet ions of a few keV with cool mantle ions of a few hundred eV was observed, indicating transport across the separatrix. The waves observed between 0.01 and 10 Hz around the separatrix had characteristics consistent with those of KAWs. The consistency allowed us to estimate the wave vectors as a function of frequency by fitting KAW dispersion to the observations. Using the observed wave powers, plasma moments, and the estimated wave vectors, we computed the cross‐field diffusion rates associated with KAWs. The diffusion rates were found to be comparable to or larger than the Bohm diffusion rates during the intervals when the two‐component mixing was observed, indicating that the KAW diffusive transport can play a role in the entry of low‐latitude mantle ions into the plasma sheet.

Kinetic Alfvén waves↗

Waves in the inner magnetosheath - A case study

We study the waves within, and upstream of, the density enhancements in front of the magnetopause using magnetic field and plasma measurements from ISEE 1 and 2. The waves upstream of the density enhancements are most likely to be mirror modes and are convected with the magnetosheath flow. Within the density enhancements there is additional wave power at lower frequencies. These low frequency waves appear to be slow modes propagating sunward and quasi-standing in the flow. These observations lend support to the contention that the outer edge of the density enhancement is a slow mode wave front which marks the greatest distance that slow modes can propagate upstream into the solar wind.

Song, P.↗

Nonlinear evolution of the auroral electron beam

The nonlinear spatial evolution, from the source to the atmosphere, of the auroral electron beam and the beam-generated electrostatic whistler noise was studied, calculating changes in beam parameters from equations for the conservation of total particle and wave energy and momentum flux density. Wave power fluxes were calculated by numerically integrating the wave kinetic equations, and the levels of beam-generated noise were determined by using thermal levels of Cerenkov radiation as a source. It was found that beam parameters evolve on ionospheric scale lengths, and their positive slope feature in velocity space is maintained over altitudes measured in thousands of kilometers of altitude, even though they can generate wave energy density fluxes sufficient to modify the ionospheric density profile.

Maggs, James E.↗

High-power generation in IMPATT devices in the 100-200-GHz range

A silicon double-drift IMPATT diode with high uniform doping levels was simulated. Simulation results show that it is possible for silicon IMPATT diodes to generate extremely high pulsed output power for frequencies above 100 GHz under high current-density operation. The highest output power matched to a 1-ohm load resistance obtained at 150 GHz is 37.7 W, with a dc current density of 200 kA/sq cm, although the calculated power conversion efficiency is low. It is also shown that the low-power conversion efficiency limits the diode's continuous wave power operation.

Chen, Chien-Chung↗

Model-data comparisons of moments of nonbreaking shoaling surface gravity waves

The predictions of linear and nonlinear (Boussinesq) shoaling wave models for nonbreaking unidirectional surface gravity waves are compared to field observations, with particular emphasis on quantities that may be important for cross-shore sediment transport. The extensive data sets were obtained on two natural beaches, span water depths between 1 and 10 m, and include incident wave power spectra with narrow, broad, and bimodal shapes. Significant wave heights varied between approximately 30 and 100 cm, and peak periods between approximately 8 and 18 s. The evolution of total variances of sea surface elevation, cross-shore velocity, and horizontal acceleration is modeled at least qualitatively well by both linear and nonlinear theories. Only the nonlinear theory predicts the increasingly asymmetric sea surface elevations and horizontal velocities (pitched-forward wave shapes) and the weaker variation of skewness (difference between crest and trough profiles) which are observed to occur during shoaling. The nonlinear theory also models qualitatively well the large skewed accelerations which occur during the passage of asymmetric waves.

Elgar, Steve↗

Two-component model of strong Langmuir turbulence - Scalings, spectra, and statistics of Langmuir waves

A simple two-component model of strong turbulence that makes clear predictions for the scalings, spectra, and statistics of Langmuir waves is developed. Scalings of quantities such as energy density, power input, dissipation power wave collapse, and number density of collapsing objects are investigated in detail and found to agree well with model predictions. The nucleation model of wave-packet formation is strongly supported by the results. Nucleation proceeds with energy flowing from background to localized states even in the absence of a driver. Modulational instabilities play little or no role in maintaining the turbulent state when significant density nonuniformities are present.

Robinson, P. A.↗

Unified Models of Turbulence and Nonlinear Wave Evolution in the Extended Solar Corona and Solar Wind

The PI (Cranmer) and Co-I (A. van Ballegooijen) made significant progress toward the goal of building a "unified model" of the dominant physical processes responsible for the acceleration of the solar wind. The approach outlined in the original proposal comprised two complementary pieces: (1) to further investigate individual physical processes under realistic coronal and solar wind conditions, and (2) to extract the dominant physical effects from simulations and apply them to a one-dimensional and time-independent model of plasma heating and acceleration. The accomplishments in the report period are thus divided into these two categories: 1a. Focused Study of Kinetic MHD Turbulence. We have developed a model of magnetohydrodynamic (MHD) turbulence in the extended solar corona that contains the effects of collisionless dissipation and anisotropic particle heating. A turbulent cascade is one possible way of generating small-scale fluctuations (easy to dissipate/heat) from a pre-existing population of low-frequency Alfven waves (difficult to dissipate/heat). We modeled the cascade as a combination of advection and diffusion in wavenumber space. The dominant spectral transfer occurs in the direction perpendicular to the background magnetic field. As expected from earlier models, this leads to a highly anisotropic fluctuation spectrum with a rapidly decaying tail in the parallel wavenumber direction. The wave power that decays to high enough frequencies to become ion cyclotron resonant depends on the relative strengths of advection and diffusion in the cascade. For the most realistic values of these parameters, though, there is insufficient power to heat protons and heavy ions. The dominant oblique waves undergo Landau damping, which implies strong parallel electron heating. We thus investigated the nonlinear evolution of the electron velocity distributions (VDFs) into parallel beams and discrete phase-space holes (similar to those seen in the terrestrial magnetosphere) which are an alternate means of heating protons via stochastic interactions similar to particle-particle collisions. 1b. Focused Study of the Multi-Mode Detailed Balance Formalism. The PI began to explore the feasibility of using the "weak turbulence," or detailed-balance theory of Tsytovich, Melrose, and others to encompass the relevant physics of the solar wind. This study did not go far, however, because if the "strong" MHD turbulence discussed above is a dominant player in the wind's acceleration region, this formalism is inherently not applicable to the corona. We will continue to study the various published approaches to the weak turbulence formalism, especially with an eye on ways to parameterize nonlinear wave reflection rates. 2. Building the Unified Model Code Architecture. We have begun developing the computational model of a time-steady open flux tube in the extended corona. The model will be "unified" in the sense that it will include (simultaneously for the first time) as many of the various proposed physical processes as possible, all on equal footing. To retain this generality, we have formulated the problem in two interconnected parts: a completely kinetic model for the particles, using the Monte Carlo approach, and a finite-difference approach for the self-consistent fluctuation spectra. The two codes are run sequentially and iteratively until complete consistency is achieved. The current version of the Monte Carlo code incorporates gravity, the zero-current electric field, magnetic mirroring, and collisions. The fluctuation code incorporates WKJ3 wave action conservation and the cascade/dissipation processes discussed above. The codes are being run for various test problems with known solutions. Planned additions to the codes include prescriptions for nonlinear wave steepening, kinetic velocity-space diffusion, and multi-mode coupling (including reflection and refraction).

Cranmer, Steven R.↗

The 20 GHz GaAs monolithic power amplifier module development

The development of a 20 GHz GaAs FET monlithic power amplifier module for advanced communication applications is described. Four-way power combing of four 0.6 W amplifier modules is used as the baseline approach. For this purpose, a monolithic four-way traveling-wave power divider/combiner was developed. Over a 20 GHz bandwidth (10 to 30 GHz), an insertion loss of no more than 1.2 dB was measured for a pair of back-to-back connected divider/combiners. Isolation between output ports is better than 20 dB, and VSWRs are better than 21:1. A distributed amplifier with six 300 micron gate width FETs and gate and drain transmission line tapers has been designed, fabricated, and evaluated for use as an 0.6 W module. This amplifier has achieved state-of-the-art results of 0.5 W output power with at least 4 dB gain across the entire 2 to 21 GHz frequency range. An output power of 2 W was achieved at a measurement frequency of 18 GHz when four distributed amplifiers were power-combined using a pair of traveling-wave divider/combiners. Another approach is the direct common-source cascading of three power FET stages. An output power of up to 2W with 12 dB gain and 20% power-added efficiency has been achieved with this approach (at 17 GHz). The linear gain was 14 dB at 1 W output. The first two stages of the three-stage amplifier have achieved an output power of 1.6 W with 9 dB gain and 26% power-added efficiency at 16 GHz.

Source record↗

Resistojet control and power for high frequency ac buses

Resistojets are operational on many geosynchronous communication satellites which all use dc power buses. Multipropellant resistojets were selected for the Initial Operating Capability (IOC) Space Station which will supply 208 V, 20 kHz power. This paper discusses resistojet heater temperature controllers and passive power regulation methods for ac power systems. A simple passive power regulation method suitable for use with regulated sinusoidal or square wave power was designed and tested using the Space Station multipropellant resistojet. The breadboard delivered 20 kHz power to the resistojet heater. Cold start surge current limiting, a power efficiency of 95 percent, and power regulation of better than 2 percent were demonstrated with a two component, 500 W breadboard power controller having a mass of 0.6 kg.

Gruber, Robert P.↗

Resistojet control and power for high frequency ac buses

Resistojets are operational on many geosynchronous communication satellites which all use dc power buses. Multipropellant resistojets were selected for the Initial Operating Capability (IOC) Space Station which will supply 208 V, 20 kHz power. This paper discusses resistojet heater temperature controllers and passive power regulation methods for ac power systems. A simple passive power regulation method suitable for use with regulated sinusoidal or square wave power was designed and tested using the Space Station multipropellant resistojet. The breadboard delivered 20 kHz power to the resistojet heater. Cold start surge current limiting, a power efficiency of 95 percent, and power regulation of better than 2 percent were demonstrated with a two component, 500 W breadboard power controller having a mass of 0.6 kg.

Gruber, Robert P.↗

Advanced secondary power system for transport aircraft

A concept for an advanced aircraft power system was identified that uses 20-kHz, 440-V, sin-wave power distribution. This system was integrated with an electrically powered flight control system and with other aircraft systems requiring secondary power. The resulting all-electric secondary power configuration reduced the empty weight of a modern 200-passenger, twin-engine transport by 10 percent and the mission fuel by 9 percent.

Hoffman, A. C.↗

The Generation of Oblique Magnetosonic Waves

One of the outstanding issues regarding the excitation of magnetosonic waves has been the observational evidence that obliquely propagating waves are dominant at comets and planetary foreshocks despite the predictions of linear theory that maximum growth occurs at parallel propagation. To address this issue, we have conducted a detailed linear theory using a beam-ring distribution function. The results have shown that such distribution functions are associated with four separate instabilities. Two of these instabilities are similar to the right hand resonant ion/ion and the non-resonant instabilities which are also present in the case of a field aligned beam. The other two instabilities are associated with the presence of ring part of the distribution function. One of these instabilities excites magnetosonic waves with maximum growth in the oblique directions. The other excites Alfven waves with maximum growth in the oblique directions. The importance of the former instability is that it may explain the oblique nature of the magnetosonic waves observed at planetary foreshocks and comets. In order to understand the nonlinear properties of these various instabilities, we have also conducted 2-D hybrid (particle ions, fluid electrons) simulations. We have found that when the beam density is sufficiently large so that the non-resonant instability has the largest growth rate, these waves dominate the initial wave power in the system. At later times, however, the obliquely propagating magnetosonic waves become dominant. Another important finding was that when the two instabilities which excite magnetosonic waves have the largest growth rates, the system is dominated by the obliquely propagating magnetosonic waves. This is despite the fact that the largest growth rate for one of the instabilities occurs in the parallel direction. The exact cause of this is not currently understood and is under investigation.

Source record↗