Search NASA⌕ Search

SEARCH · Search NASA

Results for “weak electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Carboranyl Electrolyte Enabling Highly Reversible Sodium Metal Anodes via a “Fluorine-Free” SEI

Realization of practical sodium metal batteries (SMBs) is hindered due to lack of compatible electrolyte components, dendrite propagation, and poor understanding of anodic interphasial chemistries. Chemically robust liquid electrolytes that facilitate both favorable sodium metal deposition and a stable solid-electrolyte interphase (SEI) are ideal to enable sodium metal and anode-free cells. Herein we present advanced characterization of a novel fluorine-free electrolyte utilizing the [HCB 11 H 11 ] 1- anion. Symmetrical Na cells operated with this electrolyte exhibit a remarkably low overpotential of 0.032 V at a current density of 2.0 mA cm -2 and a high coulombic efficiency of 99.5 % in half-cell configurations. Additionally, surface characterization of electrodes post-operation reveals the absence of dendritic sodium nucleation and a surprisingly stable fluorine-free SEI. Furthermore, weak ion-pairing is identified as key towards the successful development of fluorine-free sodium electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A quantitative figure of merit for battery SEI films and their use as functional solid-state electrolytes

As a key passivation film that governs battery operation, the solid electrolyte interphase (SEI) has long been credited for enabling high-performance batteries or blamed for their eventual death. However, qualitative descriptions of the SEI often found in the literature (e.g., “conductive,” “passivating”) highlight our incomplete understanding of this layer, where even the most basic properties foundational to SEI function remain difficult to measure. Here, we quantify SEI conductivities and SEI transference numbers using a separator-free Cu|SEI|Li architecture that treats the SEI as a functional solid-state electrolyte (SSE). We find that while any SEI property alone (e.g., electronic conductivity) is weakly correlated (R 2 < 0.67) with battery performance (e.g., Coulombic efficiency), a strong correlation (R 2 > 0.99) can be achieved by defining the “SEI cT number” as a product between the SEI transference number (T) and the ratio of SEI conductivities (c). Analogous to the thermoelectric figure of merit (i.e., zT ), SEI cT quantitatively benchmarks the holistic impact of SEI properties on battery performance and underscores the pitfalls of citing such properties in isolation. Perhaps most strikingly, we demonstrate that Li metal deposition and stripping at room temperature is possible in our separator-free Cu|SEI|Li cell, confirming that the SEI can function precisely as an SSE. Together, these results enrich our understanding of the SEI, not just as a passivation layer but as a functional structure that can potentially have important implications for solid-state batteries.

Science & Technology - Other Topics↗
DOE OSTI2020

Influence of Ether Solvent and Anion Coordination on Electrochemical Behavior in Calcium Battery Electrolytes

The emergence of magnesium and calcium batteries as potential beyond Li ion energy storage technologies has generated significant interest into the fundamental aspects of alkaline earth metal cation coordination in multivalent electrolytes and the impact of coordination on application-critical electrolyte properties such as solubility, transport, and electrochemical stability. Understanding these details in calcium electrolytes is of immediate importance due to recent, unprecedented demonstrations of reversible calcium metal electrodeposition in a limited number of ethereal solvent-based systems. In this work, we provide insight connecting Ca 2+ coordination tendencies to important calcium battery electrolyte properties. Our results demonstrate a clear solvent:Ca 2+ coordination strength trend across a series of cyclic ether and linear glyme solvents that controls the extent of ion association in solutions of “weakly” coordinating salts. We apply understanding gained from these results to rationalize relative anion:Ca 2+ coordination tendencies and attendant Ca 2+ coordination structures using two oxidatively stable anions of particular interest for current battery electrolytes. Armed with this understanding of solvent and anion interactions with Ca 2+ , we demonstrate and interpret differences in electrochemical calcium deposition behavior across several electrolyte exemplars with varying solvent and anion coordination strengths. Our findings demonstrate that solvents exhibiting especially strong coordination to Ca 2+ , such as triglyme, can inhibit reversible calcium deposition despite effective elimination of anion:Ca 2+ coordination while solvents exhibiting more modest coordination strength, such as 1,2-dimethoxyethane, may enable deposition provided anion:Ca 2+ coordination is substantially limited. These results reveal that the strength of coordination of both anion and solvent should be considered in the design of electrolytes for calcium batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

What is the Role of Relative Humidity on Conductivity in Polymer Electrolytes?

Ion transport properties in polymer electrolytes have been widely studied under rigorously dry and highly water-swollen conditions. However, the transition between these extremes, i.e., the low hydration regime, is still poorly understood at the molecular level and relevant to applications ranging from battery electrolytes to electrophoretic separations. Here, in this study, we apply atomistic molecular dynamics simulations to probe the role of hydration on ion mobilities and conductivities in LiTFSI-doped polyethers at low water content (less than 10% water by volume), which corresponds to 0−80% relative humidity conditions. With increasing water content, Li + ions exhibit two distinct regimes in their mobilities. At low water content, the majority of the Li + ions are weakly hydrated (two or fewer water molecules per Li + ion), maintaining strong interactions with their polymer solvation cage, and therefore exhibit only a weak increase in mobility relative to dry conditions. As water content increases, Li + ions form complete hydration shells, residing within water-rich domains that promote faster mobilities. Further, Li + mobilities increase more significantly in polymer electrolytes composed of more hydrophilic polymers and higher salt concentrations due to the formation of larger water-rich domains. In contrast, TFSI − has comparatively weak interactions with both the polymer and water, exhibiting a monotonic increase in mobility as a function of water content. Overall, these results help clarify the molecular mechanisms underlying ionic mobilities and conductivities in polymer electrolytes at low water content.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable, Efficient Iron Electrodeposition via Anion-Directed Control of Fe(II) Coordination

Traditional steelmaking processes consume about 7% of the world’s energy supply, with reduction of iron oxides into iron via blast furnaces representing the most energy-demanding and capital-intensive step. To economize and modularize iron reduction processes, we aim to develop an electrodeposition technique to reduce aqueous iron ions to metallic iron. However, the hydrogen reduction reaction (HER) occurs at a more positive standard reduction potential than the iron reduction reaction. In addition, aqueous Fe(II) cations easily precipitate at mildly acidic conditions (pH ≥ 3), which limits the deposition efficiency and degrades deposit quality. To address these challenges, we first search for anions that have intermediate coordination strength with Fe(II) based on the hard-soft acid-base theory, trading a slightly more negative Fe(II) reduction potential for a considerably broader pH stability range. We select citrate with predicted intermediate coordination strength, in combination with more weakly coordinating anions (e.g., SO 4 2- , Cl - ) to control the coordination structure of Fe 2+ for improved electrolyte stability and electrodeposition behavior. We find that citrate coordination stabilizes Fe 2+ -based electrolytes at higher pH conditions (4.8–5.5), significantly extending their shelf life while also suppressing HER during Fe electrodeposition by orders of magnitude. To measure Faradaic efficiencies (FE), we developed a straightforward, titration-based methodology to quantify the amount of deposited iron regardless of the rate of concurrent HER. Although coordination between citrate and Fe 2+ decreases the reduction potential of Fe(II), high FE (≥98%) was achieved at 10 mA cm -2 . FE and achievable deposition rates are tunable by both concentration and the ratio of Fe 2+ to citrate. In all cases, Raman spectroscopy and X-ray diffraction (XRD) reveal that iron deposition in citrate-containing electrolytes suppresses iron oxide/hydroxide precipitation, in contrast to deposits generated in citrate-free electrolytes. Altogether, this work demonstrates that citrate-mediated anion coordination enables high-purity iron electrodeposition with increased FE, high current density, and improved electrolyte stability. This multi-anion coordination strategy provides a versatile framework for designing stable electrolyte and efficient metal electrodeposition.

coordination↗
DOE OSTI2023

Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries

Anion solvation in electrolytes can largely change the electrochemical performance of the electrolytes, yet has been rarely investigated. Herein, three anions of bis(trifluoromethanesulfonyl)imide (TFSI), bis(fluorosulfonyl)imide (FSI), and derived asymmetric (fluorosulfonyl)(trifluoro-methanesulfonyl)imide (FTFSI) are systematically examined in a weakly Li + cation solvating solvent of bis(3-fluoropropyl)ether (BFPE). In-situ liquid secondary ion mass spectrometry demonstrates that FTFSI - and FSI - anions are associated with BFPE solvent, while weak TFSI - /BFPE cluster signals are detected. Molecular modeling further reveals that the anion–solvent interaction is accompanied by the formation of H-bonding-like interactions. Further, anion solvation enhances the Li + cation transfer number and reduces the organic component in solid electrolyte interphase, which enhances the Li plating/stripping Coulombic efficiency at a low temperature of -30 °C from 42.4% in TFSI-based electrolytes to 98.7% in 1.5 m LiFTFSI and 97.9% in LiFSI-BFPE electrolytes. The anion–solvent interactions, especially asymmetric anion solvation also accelerate the Li + desolvation kinetics. The 1.5 m LiFTFSI-BFPE electrolyte with strong anion–solvent interaction enables LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||Li (20 µm) full cell with stable cyclability even under -40 °C, retaining over 92% of initial capacity (115 mAh g -1 , after 100 cycles). The anion–solvent interactions insights allow to rational design the electrolyte for lithium metal batteries and beyond to achieve high performance.

25 ENERGY STORAGE↗
DOE OSTI2020

An Inorganic-Rich Solid Electrolyte Interphase for Advanced Lithium-Metal Batteries in Carbonate Electrolytes

In carbonate electrolytes, the organic-inorganic solid electrolyte interphase (SEI) formed on the lithium (Li) metal anode surface is strongly bonded to Li and experiences the same volume change as Li, thus it undergoes continuous cracking/reformation during plating/stripping cycles. Here we report, an inorganic-rich SEI is designed on a Li metal surface to reduce its bonding energy with Li metal by dissolving 4 M concentrated LiNO 3 in dimethyl sulfoxide (DMSO) as an additive for a fluoroethylene carbonate (FEC) based electrolyte. Due to the aggregate structure of NO 3 - ions and its participation in the primary Li + solvation sheath, abundant Li 2 O, Li 3 N, and LiN x O y grains are formed in the resulting SEI, in addition to the uniform LiF distribution from the reduction of PF 6 - ions. The inorganic-rich SEI’s weak bonding (high interface energy) to Li can effectively promote Li diffusion along the SEI/Li interface and prevent Li dendrite penetration into the SEI. As a result, our designed carbonate electrolyte enables a Li anode to achieve a high Li plating/stripping CE of 99.55% (1 mA cm -2 , 1.0 mAh cm -2 ) and the electrolyte also enables a Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811) full cell (2.5 mAh cm -2 ) to retain 75%of its initial capacity after 200 cycles with an outstanding CE of 99.83%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non-thermal atmospheric pressure plasma–liquid synthesis of organic acids in aqueous solution from carbon monoxide

This work aims at understanding the conversion of CO to organic acids, namely oxalic acid and formic acid, using non-thermal atmospheric pressure plasma over aqueous solutions. CO exhibited significantly higher conversion to organic acids (more than 15×) compared to CO 2 under the same reaction conditions. The result bolsters a proposed two-step process for CO 2 fixation, whereby CO 2 is first converted to CO, and then CO is converted to organic acids. The organic acids produced from CO are intermediates in the water–gas shift (WGS) reaction of CO in the presence of an aqueous solution to dissolved CO 2 and hydrogen gas. Based on a simple thermodynamic analysis, the organic acid yield was increased by lowering the plasma–liquid reaction temperature using an ice bath to cool the reaction flask. The composition of the organic acids could be varied by changing the pH of the solution. Oxalate was formed in higher concentrations with increasing solution pH above the pK a of the radical species (CO 2 )˙ − . Below the pK a value, formate was the exclusive organic acid formed. The production of formate has a rather weak pH dependence but is enhanced slightly at a basic pH above 10. Furthermore, at basic pH, the effect of electrolyte concentration comes into play. Higher electrolyte concentrations, leading to shorter electrolyte Debye lengths, resulted in lowered organic acid yields. The highest yields of organic acids obtained in our system were 122 mg L −1 for oxalate and 77 mg L −1 for formate at an optimum 1 mM NaOH concentration in the starting solution. This work is a successful pioneering example of CO to organic acids conversion using non-thermal plasmas, which opens the pathway for a promising two-step conversion process of CO 2 to organic acids.

Sudagar, Alcina Johnson [Washington University in ↗
DOE OSTI2020

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Abstract In carbonate electrolytes, the organic–inorganic solid electrolyte interphase (SEI) formed on the Li‐metal anode surface is strongly bonded to Li and experiences the same volume change as Li, thus it undergoes continuous cracking/reformation during plating/stripping cycles. Here, an inorganic‐rich SEI is designed on a Li‐metal surface to reduce its bonding energy with Li metal by dissolving 4 m concentrated LiNO 3 in dimethyl sulfoxide (DMSO) as an additive for a fluoroethylene‐carbonate (FEC)‐based electrolyte. Due to the aggregate structure of NO 3 − ions and their participation in the primary Li + solvation sheath, abundant Li 2 O, Li 3 N, and LiN x O y grains are formed in the resulting SEI, in addition to the uniform LiF distribution from the reduction of PF 6 − ions. The weak bonding of the SEI (high interface energy) to Li can effectively promote Li diffusion along the SEI/Li interface and prevent Li dendrite penetration into the SEI. As a result, our designed carbonate electrolyte enables a Li anode to achieve a high Li plating/stripping Coulombic efficiency of 99.55 % (1 mA cm −2 , 1.0 mAh cm −2 ) and the electrolyte also enables a Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811) full cell (2.5 mAh cm −2 ) to retain 75 % of its initial capacity after 200 cycles with an outstanding CE of 99.83 %.

Liu, Sufu↗
DOE OSTI2022

Cation-Dependent Multielectron Kinetics of Metal Oxide Splitting

We report direct electrolytic extraction of metals from metal oxides is a promising process for the sustainable production of metals. In this work, we elucidate the inherent thermodynamic driving forces behind the reduction of metal oxides to metals (M-OER). It is shown that the thermodynamics of M-OER can be systematically tuned via the interactions of oxygen with the participating metal cations as a function of metal–oxygen covalency, oxygen–oxygen covalency, and metal–oxygen ionicity. We screen both group 1 elements and metals that are able to exist in the +2 oxidation state for M-OER thermodynamics. Li, Fe, and Co are identified as having low thermodynamic overpotentials for electrolytic extraction from their metal oxides due to interactions between oxygen and these metals being neither too strong (covalent) nor too weak (ionic). We further show that the bulk formation energies are predictive of M-OER reaction energetics on surfaces by developing unified design principles for tuning the thermodynamics of these reduction reactions both in bulk oxides and on surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influences of Alkali Metal Cation Interactions on N2 Coordination to Iron(I) Beta-Diketiminate Complexes in Electrolyte Solutions

N2 functionalization reactions often use stable, isolable N2-bound complexes and low temperatures or highly activated reagents. However, little work has focused on systems where N2 binds weakly, and the N2 binding equilibrium can be modulated. Here, we describe analysis of surprising trends in alkali metal cation solvation on the formation of an anionic iron(I) beta-diketiminate complex and the subsequent N2 binding equilibrium. Variable temperature UV-vis spectroscopy shows that increased ionic strength in the coordinating solvent tetrahydrofuran promotes N2 coordination. Additionally, less solvated alkali metal cations in noncoordinating 2-methyltetrahydrofuran (MeTHF) stabilize N2 coordination, likely through the formation of contact ion pairs in solution that have enhanced N2 binding. Ionic strength has little effect on the energetics of N2 coordination to these proposed contact ion pairs in MeTHF. When the electrochemical analysis is done at –78 °C, there is an irreversible reduction of iron(II) and an anodically shifted oxidation, which is attributed to the formation of the spectroscopically observed N2 complex. Finally, bulk electrolysis is used to verify the electrochemical formation of the N2-bound anionic iron(I) complex. These studies demonstrate a new strategy for promoting N2 coordination by changing solution properties, which is relevant to homogeneous electrochemical N2 reduction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Design Principles and Routes for Calcium Alkoxyaluminate Electrolytes

Multivalent-ion battery technologies are increasingly attractive options for meeting diverse energy storage needs. Calcium ion batteries (CIB) are particularly appealing candidates for their earthly abundance, high theoretical volumetric energy density, and relative safety advantages. Here, at present, only a few Ca-ion electrolyte systems are reported to reversibly plate at room temperature: for example, aluminates and borates, including Ca[TPFA] 2 , where [TPFA] - = [Al(OC(CF 3 ) 3 ) 4 ] - and Ca[B(hfip) 4 ] 2 , [B(hfip) 4 ] 2 – = [B(OCH(CF 3 ) 2 ) 4 ] - . Analyzing the structure of these salts reveals a common theme: the prevalent use of a weakly coordinating anion (WCA) consisting of a tetracoordinate aluminum/boron (Al/B) center with fluorinated alkoxides. Leveraging the concept of theory-aided design, we report an innovative, one-pot synthesis of two new calcium-ion electrolyte salts (Ca[Al(tftb) 4 ] 2 , Ca[Al(hftb) 4 ] 2 ) and two reported salts (Ca[Al(hfip) 4 ] 2 and Ca[TPFA] 2 ) where hfip = (-OCH(CF 3 ) 2 ), tftb = (-OC(CF 3 )(Me) 2 ), hftb = (-OC(CF 3 ) 2 (Me)), [TPFA] - = [Al(OC(CF 3 ) 3 ) 4 ] - . We also reveal the dependence of Coulombic efficiency on their inherent propensity for cation–anion coordination.

25 ENERGY STORAGE↗
DOE OSTI2024

Interfacial solvation-structure regulation for stable Li metal anode by a desolvation coating technique

Rechargeable lithium (Li) metal batteries face challenges in achieving stable cycling due to the instability of the solid electrolyte interphase (SEI). The Li-ion solvation structure and its desolvation process are crucial for the formation of a stable SEI on Li metal anodes and improving Li plating/stripping kinetics. This research introduces an interfacial desolvation coating technique to actively modulate the Li-ion solvation structure at the Li metal interface and regulate the participation of the electrolyte solvent in SEI formation. Through experimental investigations conducted using a carbonate electrolyte with limited compatibility to Li metal, the optimized desolvation coating layer, composed of 12-crown-4 ether-modified silica materials, selectively displaces strongly coordinating solvents while simultaneously enriching weakly coordinating fluorinated solvents at the Li metal/electrolyte interface. This selective desolvation and enrichment effect reduce solvent participation to SEI and thus facilitate the formation of a LiF-dominant SEI with greatly reduced organic species on the Li metal surface, as conclusively verified through various characterization techniques including XPS, quantitative NMR, operando NMR, cryo-TEM, EELS, and EDS. The interfacial desolvation coating technique enables excellent rate cycling stability (i.e., 1C) of the Li metal anode and prolonged cycling life of the Li||LiCoO 2 pouch cell in the conventional carbonate electrolyte (E/C 2.6 g/Ah), with 80% capacity retention after 333 cycles.

42 ENGINEERING↗
DOE OSTI2026

Lithium–Sulfur Batteries Enabled by Fluorine-Free Electrolytes with a Compressed Solvation Structure

In this paper, a fluorine-free aromatic cosolvent strategy is presented to regulate electrolyte solvation chemistry in Li-S batteries with sulfurized polyacrylonitrile (SPAN) cathodes. Assisted by the Uni-ELF AI tool and experimental validation, toluene is identified as an optimal weakly solvating cosolvent. Its incorporation compresses the Li⁺ solvation sheath and induces an anion-dominated solvation structure, thereby enhancing interfacial ion transport and sulfur redox kinetics through controlled π-π interactions with polysulfides. Consequently, Li || Li symmetric cells exhibit stable cycling for over 1,000 cycles at a current density of 1 mA cm⁻². Meanwhile, Li-S cells employing high-loading SPAN cathodes retain more than 75% of their initial capacity after 250 cycles at -10 °C. Additionally, a practical pouch cell with high SPAN loading and a low electrolyte-to-SPAN ratio of 3 µL mg⁻¹ delivers an initial capacity of around 600 mAh gSPAN⁻¹, underscoring the potential of fluorine-free electrolytes for practical metal-sulfur batteries.

25 ENERGY STORAGE↗
NASA NTRS2018

Li-ion 18650 Thermal Runaway Particulate Analysis

Three types of atmospheres were tested for their effects on the particulates generated in a lithium ion (Li-ion) battery thermal runaway. Normal laboratory air (Ambient), a mixture of 23.5% O2/76.5% N2 meant to simulate the atmosphere on the International Space Station (ISS), and Vacuum environments were tested. Samsung 26F 18650 cells were driven to thermal runaway using heater tape, and the resultant particulates were collected analyzed using SEM/EDX, FTIR, GCMS, as well as conductivity and magnetic probes. All three conditions generated dense black particulate films composed of very fine carbon and metal particles. These films, however, were not very conductive, though individual particulates would be, and the particles demonstrated weak paramagnetism. FTIR and GCMS identified a substantial amount of volatile components in the particulate films, both organic partial combustion products, but also electrolyte salt products.

Nemanick, E. Joseph↗
DOE OSTI2022

Correlation between Redox Potential and Solvation Structure in Biphasic Electrolytes for Li Metal Batteries

The activity of lithium ions in electrolytes depends on their solvation structures. However, the understanding of changes in Li + activity is still elusive in terms of interactions between lithium ions and solvent molecules. Herein, the chelating effect of lithium ion by forming [Li(15C5)] + gives rise to a decrease in Li + activity, leading to the negative potential shift of Li metal anode. Moreover, weakly solvating lithium ions in ionic liquids, such as [Li(TFSI) 2 ] - (TFSI = bis(trifluoromethanesulfonyl)imide), increase in Li + activity, resulting in the positive potential shift of LiFePO 4 cathode. This allows the development of innovative high energy density Li metal batteries, such as 3.8 V class Li | LiFePO 4 cells, along with introducing stable biphasic electrolytes. In addition, correlation between Li + activity, cell potential shift, and Li + solvation structure is investigated by comparing solvated Li + ions with carbonate solvents, chelated Li + ions with cyclic and linear ethers, and weakly solvating Li + ions in ionic liquids. These findings elucidate a broader understanding of the complex origin of Li + activity and provide an opportunity to achieve high energy density lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Identification of efficient and stable solid-solid electrochemical interfaces for Li-S batteries. Final Report

The objective of this work is to develop a better understanding of the interactions between battery components that drive the observed battery performance. Using computational tools at the atomistic level, we elucidate molecular, crystal, and amorphous structures, interfacial structures and reactions, and electrochemical behavior. We focus on Li metal anodes, liquid electrolytes, solid electrolytes, S cathodes, and metal-oxide cathodes, and their corresponding interfaces. Within liquid electrolytes, we study their bulk structure and dynamics, as a function of salt concentration. The analysis allows to understand the formation of localized high concentrated regions as the solvent is substituted by a weakly interacting diluent species. Analysis of the electron distribution yields the reactive behavior at interfaces. Moreover, we employ tools that allow the characterization of ion and electron transport at interfaces, during the processes of solvation and desolvation occurring while cycling. For Sulfur cathodes we elucidate synthesis processes and the role of carbon-sulfur and nitrogen-sulfur interactions not only to provide electronic conductivity but also to define alternative reaction pathways during discharge of Li-S batteries. Full-cell simulations offer new insights regarding the integration of all the battery components. Our studies also include solid electrolytes and their interfaces with Li metal, S-C, and metal-oxide electrodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Binding of Li + to Negatively Charged and Neutral Ligands in Polymer Electrolytes

Conceptually, single-ion polymer electrolytes (SIPE) with the anion bound to the polymer could solve major issues in Li-ion batteries, but their conductivity is too low. Experimentally, weakly interacting anionic groups have the best conductivity. To provide a theoretical basis for this result, density functional theory calculations of the optimized geometries and energies are performed for charged ligands used in SIPE. Comparison is made to neutral ligands found in dual-ion conductors, which demonstrate higher conductivity. Further, the free energy differences between adding and subtracting a ligand are small enough for the neutral ligands to have the conductivity seen experimentally. However, charged ligands have large barriers, implying that lithium transport will coincide with the slow polymer diffusion, as observed in experiments. Overall, SIPE will require additional solvent to achieve a sufficiently high conductivity. Additionally, the binding of mono- and bidentate geometries varies, providing a simple and clear reason that polarizable force fields are required for detailed interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗