Search NASA⌕ Search

SEARCH · Search NASA

Results for “weak interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Microgravity particle research on the Space Station - The gas-grain simulation facility

In the gravitational field on earth, the large settling rate of micron-sized particles and the effects of gravity-induced convection prohibit many interesting studies of phenomena such as coagulation, collisions, and mutual interactions of droplets, dust grains and other particles. Examples of exobiology experiments involving these phenomena are the simulation of organic aerosol formation in Titan's atmosphere, studies of the role of comets in prebiotic chemical evolution, and simulations of carbon grain interactions in various astrophysical environments. The Gas-Grain Simulation Facility (GGSF) is a proposed earth-orbital laboratory that will allow present ground-based experimental programs which study processes involving small particles and weak interactions to be extended to a new domain. Physics issues that scientists wishing to propose GGSF experiments must consider are reviewed in this paper. Specifically, coagulation, motion in gases and vacua, and wall deposition of particles in a microgravity environment are discussed.

Fogleman, G.↗

Dissipating Step Bunches during Crystallization under Transport Control

In studies of crystal formation by the generation and spreading of layers, equidistant step trains are considered unstable---bunches and other spatiotemporal patterns of the growth steps are viewed as ubiquitous. We provide an example to the opposite. We monitor the spatiotemporal dynamics of steps and the resulting step patterns during crystallization of the proteins ferritin and apoferritin using the atomic force microscope. The variations in step velocity and density are not correlated, indicating the lack of a long-range attraction between the steps. We show that (i) because of its coupling to bulk transport, nucleation of new layers is chaotic and occurs at the facet edges, where the interfacial supersaturation is higher; (ii) step bunches self-organize via the competition for supply from the solution; and, (iii) bunches of weakly interacting steps decay as they move along the face. Tests by numerical modeling support the conclusions about the mechanisms underlying our observations. The results from these systems suggest that during crystallization controlled by transport, with weakly or noninteracting growth steps, the stable kinetic state of the surface is an equidistant step train, and step bunches only arise during nucleation of new layers. Since nucleation only occurs at a few sites on the surface, the surface morphology may be controllably patterned or smoothened by locally controlling nucleation.

Lin, Hong↗

Nucleation and Growth According to Lysozyme

How does one take a molecule, strongly asymmetric in both shape and charge distribution, and assemble it into a crystal? We propose a model for the nucleation and crystal growth process for tetragonal lysozyme that may be very germane to other monomeric proteins. The first species formed is postulated to be a dimer. Through repeating associations involving the same intermolecular interactions this becomes the 4(sub 3) helix, that in turn serves as the basic unit for nucleation and crystal growth. High salt attenuates surface charges while promoting hydrophobic interactions. Symmetry facilitates helix self-association. Assembly stability is enhanced when a four helix structure is obtained, with each bound to two neighbors. Only two unique interactions are required. The first are those for helix formation, where the dominant interaction is the intermolecular bridging anion. The second is the anti-parallel side-by-side helix-helix interaction, guided by alternating pairs of symmetry related salt bridges along each side. At this stage all eight unique positions of the P4(sub 3)2(sub 1)2(sub 1) unit cell are filled. From the above, the process is one of a) attenuating the most strongly interacting groups, such that b) the molecules begin to self-associate in defined patterns, so that c) symmetry is obtained, which d) propagates as a growing crystal. Simple and conceptually obvious in hindsight, this tells much about what we are empirically doing when we crystallize macromolecules. By adjusting the solution parameters we are empirically balancing the intermolecular interactions, preferentially attenuating the dominant strong (for lysozyme the charged groups) while strengthening the lesser strong (hydrophobic) interactions. Lysozyme is atypical in the breadth of its crystallization conditions; many proteins only crystallize under narrowly defined conditions, pointing to the criticality of the empirical balancing process. Lack of a singularly defined association pathway leads to formation of multiple species, i.e., amorphous precipitation. Weak interactions, such as hydrogen bonds, are promiscuous, serving to strengthen rather than define specific interactions. Participation in an interaction sequesters that surface from subsequent interactions, and we expect the strongest bonds to form first. When two molecules self associate the resulting species will have an axis of symmetry. Subsequent interactions between two associated species having equivalent interactions will also have symmetry. Only a few unique sets of interactions are required to give any of the commonly found space groups for monomeric proteins. This model and what it suggests will be discussed.

Pusey, Marc L.↗

Direct numerical simulation of isotropic turbulence interacting with a weak shock wave

Direct numerical simulations are used to investigate the interaction of isotropic quasi-incompressible turbulence with a weak shock wave. A linear analysis of the interaction is conducted for comparison with the simulations. Both the simulations and the analysis show that turbulence is enhanced during the interaction. Turbulent kinetic energy and transverse vorticity components are amplified, and turbulent lengthscales are decreased. It is suggested that the amplification mechanism is primarily linear. Simulations also showed a rapid evolution of turbulent kinetic energy just downstream of the shock, a behavior not reproduced by the linear analysis. Analysis of the budget of the turbulent kinetic energy transport equation shows that this behavior can be attributed to the pressure transport term. Multiple compression peaks were found along the mean streamlines at locations where the local shock thickness had increased significantly.

Lee, Sangsan↗

The Spectral and Statistical Properties of Turbulence Generated by a Vortex/Blade-Tip Interaction

The perpendicular interaction of a streamwise vortex with the tip of a lifting blade was studied in incompressible flow to provide information useful to the accurate prediction of helicopter rotor noise and the understanding of vortex dominated turbulent flows. The vortex passed 0.3 chord lengths to the suction side of the blade tip, providing a weak interaction. Single and two-point turbulence measurements were made using sub-miniature four sensor hot-wire probes 15 chord lengths downstream of the blade trailing edge; revealing the mean velocity and Reynolds stress tensor distributions of the turbulence, as well as its spanwise length scales as a function of frequency. The single point measurements show the flow downstream of the blade to be dominated by the interaction of the original tip vortex and the vortex shed by the blade. These vortices rotate about each other under their mutual induction, winding up the turbulent wakes of the blades. This interaction between the vortices appears to be the source of new turbulence in their cores and in the region between them. This turbulence appears to be responsible for some decay in the core of the original vortex, not seen when the blade is removed. The region between the vortices is not only a region of comparatively large stresses, but also one of intense turbulence production. Velocity autospectra measured near its center suggests the presence quasi-periodic large eddies with axes roughly parallel to a line joining the vortex cores. Detailed two-point measurements were made on a series of spanwise cuts through the flow so as to reveal the turbulence scales as they would be seen along the span of an intersecting airfoil. The measurements were made over a range of probe separations that enabled them to be analyzed not only in terms of coherence and phase spectra but also in terms of wave-number frequency (kappa-omega) spectra, computed by transforming the measured cross-spectra with respect to the spanwise separation of the probes. These data clearly show the influence of the coherent eddies in the spiral wake and the turbulent region between the cores. These eddies produce distinct peaks in the upwash velocity kappa-omega spectra, and strong anisotropy manifested both in the decay of the kappa-omega spectrum at larger wave-numbers and in differences between the kappa-omega spectra of different components. None of these features are represented in the von Karman spectrum for isotropic turbulence that is often used in broadband noise computations. Wave-number frequency spectra measured in the cores appear to show some evidence that the turbulence outside sets tip core waves, as has previously been hypothesized. These spectra also provide for the first time a truly objective method for distinguishing velocity fluctuations produced by core wandering from other motions.

Devenport, William J.↗

Iterative PNS method for attached flows with upstream influence

A stable global-iteration procedure is developed by utilizing successive sweeps, from inflow to outflow boundaries, of a parabolized Navier-Stokes code for attached, steady supersonic flow. It is shown that the procedure converges in about ten or fewer iterations, and allows for the upstream influence within the subsonic region of a supersonic boundary layer. An implicit forward difference is employed in the subsonic region to evaluate the pressure-gradient term in the streamwise momentum equation. The pressure-gradient term is normally approximated in standard single-sweep parabolized methods, suppressing the upstream influence. The iterative results obtained demonstrate the validity of the single-sweep method for weak interactions. For hypersonic viscous interaction on a flat plate at a Mach number of 5.8, it is found that the single-sweep method has a small error that vanishes as the Reynolds number of the flow is increased. However, the skin friction has an error of about 10 percent for low Reynolds numbers and for hot wall conditions. The application of this method to laminar two-dimensional flow over weak expansion and compression corners shows that the pressure and skin friction results in the vicinity of the expansion corner compare favorably with a time-dependent Navier-Stokes numerical solution.

Rakich, J. V.↗

Complex formation by the human Rad51B and Rad51C DNA repair proteins and their activities in vitro

The human Rad51 protein is essential for DNA repair by homologous recombination. In addition to Rad51 protein, five paralogs have been identified: Rad51B/Rad51L1, Rad51C/Rad51L2, Rad51D/Rad51L3, XRCC2, and XRCC3. To further characterize a subset of these proteins, recombinant Rad51, Rad51B-(His)(6), and Rad51C proteins were individually expressed employing the baculovirus system, and each was purified from Sf9 insect cells. Evidence from nickel-nitrilotriacetic acid pull-down experiments demonstrates a highly stable Rad51B.Rad51C heterodimer, which interacts weakly with Rad51. Rad51B and Rad51C proteins were found to bind single- and double-stranded DNA and to preferentially bind 3'-end-tailed double-stranded DNA. The ability to bind DNA was elevated with mixed Rad51 and Rad51C, as well as with mixed Rad51B and Rad51C, compared with that of the individual protein. In addition, both Rad51B and Rad51C exhibit DNA-stimulated ATPase activity. Rad51C displays an ATP-independent apparent DNA strand exchange activity, whereas Rad51B shows no such activity; this apparent strand exchange ability results actually from a duplex DNA destabilization capability of Rad51C. By analogy to the yeast Rad55 and Rad57, our results suggest that Rad51B and Rad51C function through interactions with the human Rad51 recombinase and play a crucial role in the homologous recombinational repair pathway.

Non-NASA Center↗

Structures Self-Assembled Through Directional Solidification

Nanotechnology has created a demand for new fabrication methods with an emphasis on simple, low-cost techniques. Directional solidification of eutectics (DSE) is an unconventional approach in comparison to low-temperature biomimetic approaches. A technical challenge for DSE is producing microstructural architectures on the nanometer scale. In both processes, the driving force is the minimization of Gibb's free energy. Selfassembly by biomimetic approaches depends on weak interaction forces between organic molecules to define the architectural structure. The architectural structure for solidification depends on strong chemical bonding between atoms. Constituents partition into atomic-level arrangements at the liquid-solid interface to form polyphase structures, and this atomic-level arrangement at the liquid-solid interface is controlled by atomic diffusion and total undercooling due to composition (diffusion), kinetics, and curvature of the boundary phases. Judicious selection of the materials system and control of the total undercooling are the keys to producing structures on the nanometer scale. The silicon-titanium silicide (Si-TiSi2) eutectic forms a rod structure under isothermal cooling conditions. At the NASA Glenn Research Center, directional solidification was employed along with a thermal gradient to promote uniform rods oriented with the thermal gradient. The preceding photomicrograph shows the typical transverse microstructure of a solidified Si-TiSi2 eutectic composition. The dark and light gray regions are Si and TiSi2, respectively. Preferred rod orientation along the thermal gradient was poor. The ordered TiSi2 rods have a narrow distribution in diameter of 2 to 3 m, as shown. The rod diameter showed a weak dependence on process conditions. Anisotropic etch behavior between different phases provides the opportunity to fabricate structures with high aspect ratios. The photomicrographs show the resulting microstructure after a wet chemical etch and a dry plasma etch. The wet chemical etches the silicon away, exposing the TiSi2 rods, whereas plasma etching preferentially etches the Si-TiSi2 interface to form a crater. The porous architectures are applicable to fabricating microdevices or creating templates for part fabrication. The porous rod structure can serve as a platform for fabricating microplasma devices for propulsion or microheat exchangers and for fabricating microfilters for miniatured chemical reactors. Although more work is required, self-assembly from DSE can have a role in microdevice fabrication.

Dynys, Frederick W.↗

Summary of conference

Strong and weak interactions of elementary particles and particle decay

NUCLEON-NUCLEON SCATTERING↗

On strange leptons.

Criticism of Weiner weak interaction proposal for neutral and charged leptons existence, considering modified scheme with only strange leptons

Beall, E. F.↗

Gamma-neutrino angular correlations in muon capture.

Using a high-resolution Ge(Li) spectrometer, it proved possible to observe several Doppler-broadened gamma-ray transitions in Al-28 excited by muon capture in Si-28. Several of these transitions are shown to be suitable for analysis in terms of angular correlations between the neutrino and a deexcitation nuclear gamma-ray. The observed transitions are interpreted in terms of gamma-neutrino correlation coefficients which are functions of the weak-interaction coupling constants.

Miller, G. H.↗

Neutral and ion-exospheres in the solar wind with applications to Mercury

Construction of a model neutral and ion exosphere for a planet weakly interacting with the solar wind. The model is constructed in general terms and is then specialized to possible neutral and ion exospheres for the planet Mercury. The neutral exosphere model allows for density and temperature variations and for rotation at the exobase. The ion exosphere is produced by ionization of the neutral exosphere in the solar wind, and its density distribution is obtained by solving the continuity equation in the drift approximation. Applying to Mercury a surface temperature distribution inferred from infrared data and a vanishing bound neutral flux at the base, He and He(+) density distributions are found. When the He atmosphere of Mercury is due entirely to the surface bombardment by solar wind He(2+), the resulting He(+) density is found to vary from 0.15 to 0.001 per cu cm over the range from 1.5 to 5 planetocentric radii on the dayside. These densities are found to be detectable by typical solar-wind plasma instruments.

Hartle, R. E.↗

Orbital electron capture by the nucleus

The theory of nuclear electron capture is reviewed in the light of current understanding of weak interactions. Experimental methods and results regarding capture probabilities, capture ratios, and EC/Beta(+) ratios are summarized. Radiative electron capture is discussed, including both theory and experiment. Atomic wave function overlap and electron exchange effects are covered, as are atomic transitions that accompany nuclear electron capture. Tables are provided to assist the reader in determining quantities of interest for specific cases.

Bambynek, W.↗

The neutrino charge form-factor

Mathematical analysis and dispersion relations are used to obtain the general functional form of the neutrino charge form-factor. It is shown that if the scale for weak interactions is given by G, where G is the Fermi coupling constant, then for a large range of momentum transfer values, the form-factor may be approximated by a function that is linear in the square of the momentum transfer.

Mickens, R. E.↗

COMOC 2: Two-dimensional aerodynamics sequence, computer program user's guide

The COMOC finite element fluid mechanics computer program system is applicable to diverse problem classes. The two dimensional aerodynamics sequence was established for solution of the potential and/or viscous and turbulent flowfields associated with subsonic flight of elementary two dimensional isolated airfoils. The sequence is constituted of three specific flowfield options in COMOC for two dimensional flows. These include the potential flow option, the boundary layer option, and the parabolic Navier-Stokes option. By sequencing through these options, it is possible to computationally construct a weak-interaction model of the aerodynamic flowfield. This report is the user's guide to operation of COMOC for the aerodynamics sequence.

Manhardt, P. D.↗

Finite element analysis of low speed viscous and inviscid aerodynamic flows

A weak interaction solution algorithm was established for aerodynamic flow about an isolated airfoil. Finite element numerical methodology was applied to solution of each of differential equations governing potential flow, and viscous and turbulent boundary layer and wake flow downstream of the sharp trailing edge. The algorithm accounts for computed viscous displacement effects on the potential flow. Closure for turbulence was accomplished using both first and second order models. The COMOC finite element fluid mechanics computer program was modified to solve the identified equation systems for two dimensional flows. A numerical program was completed to determine factors affecting solution accuracy, convergence and stability for the combined potential, boundary layer, and parabolic Navier-Stokes equation systems. Good accuracy and convergence are demonstrated. Each solution is obtained within the identical finite element framework of COMOC.

Baker, A. J.↗

Modeling of premixing-prevaporizing fuel-air mixing passages

The development of a computer program for the analytical prediction of the distribution of liquid and vapor fuel in the premixing-prevaporizing passage by the direct injection method is described. The technical approach adopted for this program is to separate the problem into three parts each with its own computer code. These three parts are: calculation of the two-dimensional or axisymmetric air flow; calculation of the three-dimensional fuel droplet evaporation; and calculation of the fuel vapor diffusion. This method of approach is justified because premixing passages operate at lean equivalence ratios. Hence, a weak interaction assumption can be made wherein the airflow can affect the fuel droplet behavior but the fuel droplet behavior does not affect the airflow.

Anderson, O. L.↗