SEARCH · Search NASA

Results for “workshop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems

This publication contains the proceedings of the Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems. In this workshop, as in previous workshops, the problems were devised to gauge the technological advancement of computational techniques to calculate all aspects of sound generation and propagation in air directly from the fundamental governing equations. A variety of benchmark problems have been previously solved ranging from simple geometries with idealized acoustic conditions to test the accuracy and effectiveness of computational algorithms and numerical boundary conditions; to sound radiation from a duct; to gust interaction with a cascade of airfoils; to the sound generated by a separating, turbulent viscous flow. By solving these and similar problems, workshop participants have shown the technical progress from the basic challenges to accurate CAA calculations to the solution of CAA problems of increasing complexity and difficulty. The fourth CAA workshop emphasized the application of CAA methods to the solution of realistic problems. The workshop was held at the Ohio Aerospace Institute in Cleveland, Ohio, on October 20 to 22, 2003. At that time, workshop participants presented their solutions to problems in one or more of five categories. Their solutions are presented in this proceedings along with the comparisons of their solutions to the benchmark solutions or experimental data. The five categories for the benchmark problems were as follows: Category 1:Basic Methods. The numerical computation of sound is affected by, among other issues, the choice of grid used and by the boundary conditions. Category 2:Complex Geometry. The ability to compute the sound in the presence of complex geometric surfaces is important in practical applications of CAA. Category 3:Sound Generation by Interacting With a Gust. The practical application of CAA for computing noise generated by turbomachinery involves the modeling of the noise source mechanism as a vortical gust interacting with an airfoil. Category 4:Sound Transmission and Radiation. Category 5:Sound Generation in Viscous Problems. Sound is generated under certain conditions by a viscous flow as the flow passes an object or a cavity.

Dahl, Milo D.↗

NASA NTRS2006

Proceedings of the NASA Laboratory Astrophysics Workshop

This report is a collection of papers presented at the 2006 NASA Workshop on Laboratory Astrophysics held in the University of Nevada, Las Vegas (UNLV) from February 14 to 16, 2006. This workshop brings together producers and users of laboratory astrophysics data so that they can understand each other's needs and limitations in the context of the needs for NASA's missions. The last NASA-sponsored workshop was held in 2002 at Ames Research Center. Recent related meetings include the Topical Session at the AAS meeting and the European workshop at Pillnitz, Germany, both of which were held in June 2005. The former showcased the importance of laboratory astrophysics to the community at large, while the European workshop highlighted a multi-laboratory approach to providing the needed data. The 2006 NASA Workshop on Laboratory Astrophysics, sponsored by the NASA Astrophysics Division, focused on the current status of the field and its relevance to NASA. This workshop attracted 105 participants and 82 papers of which 19 were invited. A White Paper identifying the key issues in laboratory astrophysics during the break-out sessions was prepared by the Scientific Organizing Committee, and has been forwarded to the Universe Working Group (UWG) at NASA Headquarters. This White Paper, which represented the collective inputs and opinions from experts and stakeholders in the field of astrophysics, should serve as the working document for the future development of NASA's R&A program in laboratory astrophysics.

Weck, Phillippe F.↗

NASA NTRS2011

Telemedicine in Space Flight - Summary of a NASA Workshop

The Exploration Medical Capability Element of the Human Research Program at NASA Johnson Space Center hosted the Telemedicine Workshop in January 2011 to discuss the medical operational concept for a crewed mission to a near-Earth asteroid (NEA) and to identify areas for future work and collaboration. With the increased likelihood of a medical incident on a long duration exploration mission to a near-Earth asteroid, as well as the fact that there will likely be limited medical capabilities and resources available to diagnose and treat medical conditions, it is anticipated that a more structured use of telemedicine will become highly desirable. The workshop was convened to solicit expert opinion on current telemedicine practices and on medical care in remote environments. Workshop Objectives: The workshop brought together leaders in telemedicine and remote medicine from The University of Texas Medical Branch, Henry Ford Hospital, Ontario Telemedicine Network, U.S. Army Institute of Surgical Research, University of Miami, American Telemedicine Association, Doctors Without Borders, and the Pan American Health Organization. The primary objectives of the workshop were to document the medical operations concept for a crewed mission to a NEA, to determine gaps between current capabilities and the capabilities outlined in the operations concept, to identify research required to close these gaps, and to discuss potential collaborations with external-to-NASA organizations with similar challenges. Summary of Discussions and Conclusions: The discussions held during the workshop and the conclusions reached by the workshop participants were grouped into seven categories: Crew Medical Officers, Patient Area in Spacecraft, Training, Electronic Medical Records, Intelligent Care Systems, Consultation Protocols, Prophylactic Surgical Procedures, and Data Prioritization. The key points discussed under each category will be presented.

Barsten, K. N.↗

NASA NTRS2011

March 2011 Physical Indicators Workshop Summary Report

The National Climate Assessment (NCA) convened a workshop on Physical Climate Indicators from 29-30 March 2011, as part of a series on Monitoring Climate Change and its Impacts . The overarching goal of this workshop was to identify a few broad categories of potential physical climate indicators using a set of priorities developed by the NCA, and to provide a clear justification for how they would inform the Nation about climate change. Additional goals included providing input on the overall NCA framework for selecting the indicators and suggesting methodologies to construct indicators. Although one of the workshop goals was to address the status of current observational networks to support indicators, this was not a main focus of any single discussion. However, participants agreed with the NCA indicator vision that high quality data were needed to develop indicators, and generally focused on identifying indicator categories that current observation systems could support. The nearly 60 participants, primarily from Federal agencies, received a white paper in advance of the workshop that detailed the NCA vision for a coordinated suite of climate-related physical, ecological, and societal indicators. The intent of these national indicators of change is to develop a way to evaluate and communicate over time both the rate of change in impacts and the capacity to respond to climate drivers. These indicators will be tracked as a part of ongoing, long-term assessment activities, with adjustments as necessary to adapt to changing conditions and understanding. An initial framework was provided to workshop participants to ensure that everyone understood the audience, scope, and purpose of the indicators. A common lexicon was defined since indicator terminology varies widely. In addition, several potential approaches to grouping or categorizing the indicators were presented. Participants spent most of their time in small breakout groups with facilitators, working to address a common set of questions. The workshop was structured to start with the broadest issue and then focus down as the workshop progressed. The first breakout therefore solicited comments on the NCA indicator framework, followed by discussion of the potential approaches to organizing the physical climate indicators. Once several approaches were identified, the groups then worked to define specific measurements, or types of measurements, that could be used to create the indicators.

Roberts, Brent↗

NASA NTRS2009

Proceedings of Minnowbrook Workshops I to VI

This DVD collection includes the complete proceedings of Minnowbrook Workshops I through VI. Titles include Minnowbrook I - 1993 Workshop on End-Stage Boundary Layer Transition (NASA/CP-2007-214667, CASI ID 20070038942), Minnowbrook II - 1997 Workshop on Boundary Layer Transition in Turbomachines (NASA/CP-1998-206958, CASI ID 19980206205), Minnowbrook III - 2000 Workshop on Boundary Layer Transition and Unsteady Aspects of Turbomachinery Flow (NASA/CP-2001-210888, CASI ID 20020067662), Minnowbrook IV - 2003 Workshop on Transition and Unsteady Aspects of Turbomachinery Flows (NASA TM-2004-212913, CASI ID 20040121174), Minnowbrook V - 2006 Workshop on Unsteady Flows in Turbomachinery (NASA/CP-2006-214484, CASI ID 20070024781), and Minnowbrook VI - 2009 Workshop on Flow Physics and Control for Internal and External Aerodynamics (NASA/CP-2010-216112, CASI ID 20100018557).

John E. Lagraff↗

NASA NTRSDate not supplied

FUN3D Analyses in Support of the 1st AIAA Stability and Control Prediction Workshop

The 1st AIAA Stability and Control Prediction Workshop was created to establish best practices for the prediction of stability & control derivatives using computational fluid dynamics and assess the limitations of these computational methods when those best practices are applied. The inaugural workshop considers the ONERA version of the NASA/Boeing Common Research Model(CRM), which includes the wing, body, horizontal tail, and a vertical tail designed by ONERA. Wind tunnel tests have been conducted for this configuration with longitudinal tests having been previously published, in addition to unpublished data at small sideslip angles that will serve as ‘blind’ data for workshop data comparisons. Participants were provided a ‘family’ of unstructured grids for the full-span ONERA CRM model with the wind-tunnel sting included. This family of mixed-element grids consists of 5 levels of refinement (tiny, coarse, medium, fine, and extra fine) with surface and volume mesh scaling, resulting in a size range of 14.6 to 53.4 million nodes. In addition, a medium refinement mesh has been provided for the ONERA CRM configuration without a sting to evaluate the sting’s impact on static longitudinal stability characteristics. In addition to these workshop-provided grids, the present work also considers an equivalent ‘family’ of computational grids generated using Heldenmesh™, a rapid grid generation software by Helden Aerospace Corporation for creating high-quality, three-dimensional, mixed-element unstructured meshes. Because of the authors’ familiarity with this software, these additional grids were generated as a comparison to the workshop-provided grids and to better understand the implications of using volume-mirrored grids for stability and control predictions. The present work will contribute to the workshop with test case data generated using the NASA FUN3D code, a parallelized, unstructured, node-based, finite-volume discretization, Reynolds-averaged Navier-Stokes flow solver. Numerical simulations will be conducted using the Quadratic Constitutive Relationship (QCR) version of the Spalart-Allmaras (SA) turbulence model with negative turbulence variable provisions. Both steady and2nd-order, time-accurate simulation results are to be generated and compared for select test cases, as time permits, to investigate their impact on FUN3D predictions. The present work will consider the three primary workshop test cases: (1) grid convergence study, (2) Mach number effect on static stability, and (3) wind tunnel sting increments. Additionally, data will be provided for the two optional test cases, which include:(1) static stability derivative calculations and (2)sideslip angle sweeps. In each of the test cases, the vehicle is stationary, and the body is assumed to be rigid, where vehicle deformation has been accounted for in the model configuration geometry. For all test cases, longitudinal and lateral force and moment aerodynamic coefficients will be provided for the total configuration, in addition to a component-level breakdown that includes the port wing, starboard wing, fuselage, and tail.

CFD↗

NASA NTRSDate not supplied

Propagation Analysis of the 3rd Sonic Boom Prediction Workshop Cases using sBOOM

The 3rd Sonic Boom Prediction Workshop was held on January 4-5, 2020 in conjunction with the AIAA SciTech conference. The workshop had 23 participants who represented 6 different countries and 18 unique organizations that included government, industry, and academia. The workshop was attended by over 50 individuals. The motivation for the workshop stems from the goal of obtaining supersonic commercial overland flight. In order to replace the current prohibition with a certification standard, an international effort is required to quantify the accuracy and reliability of prediction methods. The workshops also identify deficiencies in existing methods where further research should be focused. The workshop consisted of two days with the first day focused on near-field computational fluid dynamics (CFD) and the second day on propagation techniques. For the atmospheric propagation portion of the workshop, two required cases and one optional case were prescribed for the participants to exercise their propagation implementations. This paper presents and discusses the results that were obtained using the sonic boom propagation code sBOOM. Results show that sonic boom carpets could be much different under arbitrary atmospheric conditions as opposed to standard atmospheric conditions. Additionally, several unique features when using sBOOM are presented.

Sonic Boom↗

NASA NTRSDate not supplied

FUN3D Analyses of the 5th AIAA Propulsion Aerodynamics Workshop Inlet Test Case

This work presents the results of FUN3D analyses that were performed for the 5th AIAA Propulsion Aerodynamics Workshop. The workshop was separated into two sections that focused on inlet and nozzle flows. This paper focuses on the inlet section of the workshop, which considered an axisymmetric inlet in close-proximity to the ground and subjected to a crosswind. Four levels of grid refinement were provided by the workshop committee. Participants were asked to perform simulations for three crosswind velocities on a minimum of three levels of grid refinement, for a total of nine required cases. This work employed an updated set of grids provided by the committee after completion of the workshop based on feedback from participants. The updated grids featured a larger computational domain and increased refinement near the ground vortex region. This work employed the three coarsest grid levels from the updated grid set. Note that an additional extension downstream of the inlet was added to the provided grids for this work to mitigate observed convergence issues. Additionally, a limited turbulence model study was performed for the highest value of crosswind velocity and the finest grid. The results show that grid convergence was only achieved for the case with the lowest value of crosswind velocity. However, the results were generally observed to improve, relative to the experimental data, with increasing grid refinement. The FUN3D predictions were observed to agree qualitatively with the provided experimental data. However, FUN3D exhibited a tendency to underpredict the minimum value of the radially averaged total pressure at the Aerodynamic Interface Plane, which is consistent with the general findings from the workshop. Overall, FUN3D was found to perform well relative to its peers for the PAW5 workshop inlet test case.

PAI↗

NASA NTRSDate not supplied

FUN3D Analyses of the 5th AIAA Propulsion Aerodynamics Workshop Inlet Test Case

PAI↗

NASA NTRS2023

Science Objectives for Human Exploration of Mars Workshop Report

The Science Objectives for Human Exploration of Mars Workshop was held in Denver, Colorado on May 4–6, 2022. The workshop was co-sponsored by NASA’s Science Mission Directorate and the Exploration Systems Development Mission Directorate to actively engage the planetary science community to determine what planetary science should be done by human crews on the martian surface and how those science objectives can be achieved. Sessions at the Science Objectives for Human Exploration of Mars Workshop were organized around specific planetary science objectives and mission architecture concepts that were identified during the workshop as the highest priority for human exploration. The intent of this workshop was to synthesize a notional, integrated concept of operations for each scenario to aid in planning and refining the mission architecture for the first human mission to Mars. Results from the Planetary Decadal Survey Report were released xx days before the workshop and were briefed to workshop participants who incorporated the findings in the discussions. With the Artemis missions, humans will return to the Moon using innovative technologies to explore the lunar surface. We will apply what we learn about exploration architecture, surface infrastructure, and science and exploration operations on and around the Moon to conduct successful missions with the first astronauts to Mars. A human mission to Mars will be a landmark achievement and a golden opportunity to make groundbreaking scientific discoveries on Mars. The potential scope of the science activities and impact of achieving those objectives are extraordinary.

Mars↗

NASA NTRSDate not supplied

Joint AFOSR/ONR/NASA HTP Boundary Layer Transition Workshop Summary for RAeS

A workshop hosted by three US government entities (the Air Force Office of Scientific Research, the Office of Naval Research, and the National Aeronautics and Space Administration Hypersonic Technology Project) was held in June 2023. This workshop focused on high supersonic and hypersonic boundary layer transition. The purpose of the workshop was to gather subject matter experts in the nation to determine the current state of the art in the field, any gaps or areas that require more studies, and the future of the field. Participants of the workshop were drawn from industry, academia, and government agencies. Prior to the workshop they were provided a questionnaire to spark discussion during the workshop. Roadmaps for six different areas were created as one of the final end products of the workshop.

boundary layer transition↗

NASA NTRS2014

The Affording Mars Workshop: Background and Recommendations

A human mission to Mars is the stated "ultimate" goal for NASA and is widely believed by the public to be the most compelling destination for America's space program. However, widely cited enormous costs - perhaps as much as a trillion dollars for a many-decade campaign - seem to be an impossible hurdle, although political and budget instability over many years may be equally challenging. More recently, a handful of increasingly detailed architectures for initial Mars missions have been developed by commercial companies that have estimated costs much less than widely believed and roughly comparable with previous major human space flight programs: the Apollo Program, the International Space Station, and the space shuttle. Several of these studies are listed in the bibliography to the workshop report. As a consequence of these new scenarios, beginning in spring, 2013 a multiinstitutional planning team began developing the content and invitee list for a winter workshop that would critically assess concepts, initiatives, technology priorities, and programmatic options to reduce significantly the costs of human exploration of Mars. The output of the workshop - findings and recommendations - would be presented in a number of forums and discussed with national leaders in human space flight. It would also be made available to potential international partners. This workshop was planned from the start to be the first in a series. Subsequent meetings, conferences, and symposia will concentrate on topics not able to be covered in December. In addition, to make progress in short meeting, a handful of ground rules were adopted by the planning team and agreed to by the participants. Perhaps the two most notable such ground rules were (1) the Space Launch System (SLS) and Orion would be available during the time frame considered by the participants and (2) the International Space Station (ISS) would remain the early linchpin in preparing for Mars exploration over the coming decade. The workshop was organized around three topical breakout sessions: 1. The ISS and the path to Mars: The critical coming decade 2. Affordability and sustainability: what does it mean and what are its implications within guidelines established at the start of the workshop? 3. Notional sequence(s) of cost-achievable missions for the 2020s to 2030s, including capability objectives at each stage and opportunities for coordinated robotic partnerships.

background↗

NASA NTRSDate not supplied

Summary of Propagation Cases of the Third AIAA Sonic Boom Prediction Workshop

A summary is provided for the propagation portion of the Third AIAA Sonic Boom Prediction Workshop held January 5, 2020 in conjunction with the AIAA SciTech 2020 conference. Near-field pressure waveforms for two cases were supplied at multiple azimuthal angles. Ground signatures across the breadth of the sonic boom primary carpet and their corresponding loudness metrics were requested. Each case had some required, as well as some optional, runs. The required cases included atmospheric profiles with measured data including winds. Optional cases included a level-acceleration sonic boom focusing case as well as prediction under standard atmospheric conditions. Participants provided ground signatures along with several loudness metrics using their best sonic boom prediction practices. All the participants' submissions are compared and discussed for each case. Noise or loudness measures are calculated and detailed comparisons and statistical analyses are performed and presented. Compared to previous workshops, the selected cases in the current workshop have much lower boom loudness levels. As was observed in the past workshops, the variation in the loudness measures and spread between participants' submissions increased as the computation proceeded from under-track locations towards the lateral cut-off. Lessons learned during this workshop are discussed and recommendations are made for potential improvements and possible subsequent workshops as we collectively attempt to refine our analysis methods.

SBPW3↗

NASA NTRS1983

Low-level gust gradient program and avialtion workshop effort

The Proceedings of the Workshop on Meteorological and Environmental Inputs to Aviation Systems, hosted by the University of Tennessee Space Institute, October 26-28, 1982, were prepared for publication. The Proceedings were submitted to FAA and will be distributed by August. Also, the proceedings of a one day workshop devoted specifically to wind shear and hosted during the same time frame were prepared and distributed. Plans for the 1983 workshop are proceeding extremely well. The workshop theme was established, the committee topics identified, and all ten committee chairmen contacted have agreed to accept their respective assignments. Additional logistics for the workshop are being carried out. The 1983 workshop is scheduled for October 26-28, 1983. Data gathered with the B-57B during the Joint Airport Weather Studies Project in Denver, Colorado, were analyzed. All runs for Flight 6 on July 16, 1982, were analyzed. Spectra, cross spectra and probability distributions were computed for each run. Also, Runs 10-14 of Flight 7 on July 15, 1982, were analyzed in similar detail.

Frost, W.↗

NASA NTRS1985

Proceedings of the SMRM Degradation Study Workshop

This publication contains the proceedings of the Solar Maximum Repair Mission Degradation Study Workshop, held at the Goddard Space Flight Center in Greenbelt, Maryland on May 9-10, 1985. The main purpose of the workshop was to report on the results of tests and studies of the returned Solar Maximum Mission hardware and materials. Specifically, the workshop was concerned with studies of the effects of four years exposure to a low-earth orbital environment. A summary of the results reported at the workshop is included in this publication. To provide a background for the reported findings, the summary includes a short description of the Solar Maximum Mission and the Solar Maximum Repair Mission. Some of the papers contained in this publication have been submitted by the participating organizations after the presentations were made at the workshop and may not necessarily have the same title and author/presenter as in the workshop agenda.

Satellite Servicing Project↗

NASA NTRS1986

Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)

The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.

Nishioka, Kenji↗

NASA NTRS1990

Report of the workshop on Aviation Safety/Automation Program

As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.

Morello, Samuel A.↗

NASA NTRS1995

Workshop on Physics of Accretion Disks Around Compact and Young Stars

The purpose of the two-day Workshop on Physics of Accretion Disks Around Compact and Young Stars was to bring together workers on accretion disks in the western Gulf region (Texas and Louisiana). Part 2 presents the workshop program, a list of poster presentations, and a list of workshop participants. Accretion disks are believed to surround many stars. Some of these disks form around compact stars, such as white dwarfs, neutron stars, or black holes that are members of binary systems and reveal themselves as a power source, especially in the x-ray and gamma regions of the spectrum. On the other hand, protostellar disks are believed to be accretion disks associated with young, pre-main-sequence stars and manifest themselves mostly in infrared and radio observations. These disks are considered to be a natural outcome of the star formation process. The focus of this workshop included theory and observations relevant to accretion disks around compact objects and newly forming stars, with the primary purpose of bringing the two communities together for intellectual cross-fertilization. The nature of the workshop was exploratory, to see how much interaction is possible between distinct communities and to better realize the local potential in this subject. A critical workshop activity was identification and documentation of key issues that are of mutual interest to both communities.

Liang, E↗