Search NASA⌕ Search

SEARCH · Search NASA

Results for “wrapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Mechanistic insights into sulfate and phosphate-mediated hexavalent chromium removal by tea polyphenols wrapped nano-zero-valent iron

Nano zero-valent iron via green synthesis (g-nZVI) has great potential in removing toxic hexavalent Cr(VI) from industrial wastewater. Sulfate and phosphate in wastewater can influence Cr(VI) removal by g-nZVI. Here, in this study, the Cr(VI) removal kinetics by different g-nZVI materials were investigated with the existence of sulfate and/or phosphate, and the corresponding mechanisms were first revealed using multiple characterizations, including X-ray absorption near-edge spectra (XANES) and X-ray photoelectron spectroscopy (XPS). The results showed that Cr(OH) 3 was the dominant species initially formed on the surface of g-nZVI particles before transforming to Cr 2 O 3 during the reaction of g-nZVI with Cr(VI). Sulfate in wastewater can promote the reduction from Cr(VI) to Cr(OH) 3 by g-nZVI, because sulfate triggers the release of Fe(II) and tea polyphenols (from tea extracts) from the g-nZVI surface due to the corrosion of Fe 0 core, which is in line with an obvious increase in pseudo-second-order rate constant (k 2 ) and subtle change in Cr(VI) removal capacity (q e ). However, phosphate impedes the g-nZVI corrosion and inhibits q e because of the inner-sphere complexation of phosphate onto g-nZVI decreasing the released Fe(II) for Cr 2 O 3 production. When sulfate and phosphate coexisted in contaminated water, the inhibition effect of phosphate in Cr(VI) removal by g-nZVI was stronger than the promotion of sulfate. Accordingly, q e value of g-nZVI declined from 93.4 mg g –1 to 77.5 mg g –1 , while k 2 remained constant as the molar ratio of phosphate/sulfate increased from 0.1 to 10 in water. This study provides new insights into applying g-nZVI in efficient Cr(VI) removal from contaminated water with enrichment of sulphates and phosphates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Driving Force Dependent Photoinduced Charge Transfer Dynamics in Polymer-Wrapped Semiconducting Single-Walled Carbon Nanotubes

Here, we investigate the thermodynamic driving-force dependences of photoinduced charge separation (CS) and subsequent charge transfer dynamics in single-walled carbon nanotube (SWNT)–perylenediimide (PDI) donor–acceptor (D–A) superstructures. Pump–probe spectroscopy reveals that [SWNT (•+)n ]-(PDI –• ) n CS states form on an ∼100 fs time scale following photoexcitation; these dynamics are invariant across an ∼400 mV driving force range, indicating that SWNT hole polaron formation time scales are determined by nanotube lattice and solvent relaxation. These CS states feature SWNT hole polarons adjacent to (geminate) and nearby (nongeminate) PDI radical anions. Analysis of the free energy dependence for charge recombination (CR) of [SWNT •+ ] geminate -(PDI –• ) CS states highlights an ∼2 meV value for D–A electronic coupling (HAB) and ∼0.93 eV for the total reorganization energy (λ T ). A corresponding driving force dependence of the CR dynamics for [SWNT •+ ] nongeminate -(PDI –• ) CS states indicates a diminished H AB value (∼0.6 meV) and a larger λ T (∼1.1 eV), consistent with larger transfer distances. SWNT excitons that persist following photoinduced CS drive photooxidation of PDI –• components of [SWNT (•+)n ]-(PDI –• ) n CS states ( 1 SWNT* + PDI •– → PDI + SWNT •– ); this reaction manifests a significantly reduced λ T value (∼0.67 eV) as the initially prepared SWNT reduced state bears the character of a conduction band injected electron ([SWNT •– ] CB ). This reaction thus gives rise to relaxed, nongeminate SWNT electron and hole polarons on the same nanotube; these polarons react on a 10 2 ps time scale independent of the electronic structure of these SWNT-PDI superstructures.

anions↗
DOE OSTI2020

NGC 4869 in the Coma Cluster: Twist, Wrap, Overlap, and Bend

The upgraded Giant Metrewave Radio Telescope (GMRT) has been used to image the head–tail radio galaxy NGC 4869 in the Coma cluster with an angular resolution of 6.″26 at 250–500 MHz and 2.″18 at the 1050–1450 MHz bands. The archival legacy GMRT data have also been used to image the source with angular resolutions from 4.″9 to 21.″8 at 610 MHz, 325 MHz, 240 MHz, and 150 MHz. We find that the ∼200 kpc scale radio morphology consists of five distinct regions with the clear presence of a pinch at ≈1.′4 (=38.8 kpc) and a ridge at ≈3.′4 (=94.2 kpc) from the head. The sharp bend by ∼70° at ∼3.′5 (=97 kpc) from the head is possibly due to projection effects. The radio spectra show progressive spectral steepening as a function of distance from the head and there is possibly re-acceleration of the synchrotron electrons and perhaps also magnetic field regeneration in the 6″–208″ (=2.8–96.1 kpc) region of the jet. We report a steep spectrum sheath layer enveloping a flat spectrum spine, hinting at a transverse velocity structure with a fast-moving spine surrounded by a slow-moving sheath layer. We also derive the lifetimes of the radiating electrons and equipartition parameters. A plausible explanation for the characteristic feature, a ridge of emission perpendicular to the direction of tail is the flaring of a straight, collimated radio jet as it crosses a surface brightness edge due to Kelvin–Helmholtz instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Study of wrap-rib antenna design

The results of a parametric design study conducted to develop the significant characteristics and technology limitations of space deployable antenna systems with aperture sizes ranging from 50 up to 300 m and F/D ratios between 0.5 and 3.0 are presented. Wrap/rib type reflectors of both the prime and offset fed geometry and associated feed support structures were considered. The significant constraints investigated as limitations on achievable aperture were inherent manufacturability, orbit dynamic and thermal stability, antenna weight, and antenna stowed volume. A data base, resulting in the defined maximum achievable aperture size as a function of diameter, frequency and estimated cost, was formed.

Wade, W. D.↗
NASA NTRS1982

Offset wrap rib antenna concept development

The demonstration of 50 to 150 m, STS compatible, offset antenna technology readiness is reported. Fabrication of a ground and flight testable partial 55 m reflector section and feed support structure is discussed. Reduction to practice through ground test verification is presently contained in the program. Key objectives for the program include the design of a compatible feed support structure and the fabrication and testing of critical components.

Woods, A. A., Jr.↗
NASA NTRS1981

Overview: Western Regional applications Program (WRAP) status

Interactions with all 14 of the states in the Western Region over the past three years are reviewed from NASA's perspective. Outreach and training programs using the M mobile analysis and training extension van, the University Program, classes at the Ames Center, demonstration tests with state agencies, and surveying the needs of local governments are highlighted. Planned activities, the continuance of ASVT's, and the impact of the budget cuts on NASA'S technology program are also considered.

Norman, S. M.↗
NASA NTRS1992

Wrap-up session

Listening to the case studies that were presented it became quite evident that the best data management systems were the ones where data managers and research scientists worked as a team developed in the early stages of project planning. Examples that were given included WOCE Data Assembly Centres e.g., Drifters, the Global Temperature Salinity Pilot Project (GTSPP) collaboration with Joint Analyses Centres in the U.S. and Australia, and JGOFS/BOFS development of Topical Centres. While each of these has some elements unique to the project, each had brought together 'teams' of Principal Investigators (PI's) and data management experts at an early stage of project development. Conversely, projects which had considered data management as a totally separate activity with lower priority often failed to provide the service required to meet scientific objectives. Therefore, the following actions should be brought to the attention of relevant groups within the IOC and other international organizations: (1) Publicize, at the national and international level, underway data/scientist collaborations that may be used as models in planning for the future. (2) Reduce adversarial situations where data managers and scientists appear to be in competition. (3) Colocation and other forms of collaboration often results in very high quality data sets and more timely data submission. Improved timeliness of data submissions was a common theme throughout the workshop and must be considered an important element in all future plans. Improvements in timely submission of data were noted. In order to continue this trend the advantages of timely submission of data must be stressed to those planning new ocean science projects.

Holland, Geoffrey↗
NASA NTRS1994

Analysis of cylindrical wrap-around and doubly conformal patch antennas by way of the finite element-artificial absorber method

The goal of this project was to develop analysis codes for computing the scattering and radiation of antennas on cylindrically and doubly conformal platforms. The finite element-boundary integral (FE-BI) method has been shown to accurately model the scattering and radiation of cavity-backed patch antennas. Unfortunately extension of this rigorous technique to coated or doubly curved platforms is cumbersome and inefficient. An alternative approximate approach is to employ an absorbing boundary condition (ABC) for terminating the finite element mesh thus avoiding use of a Green's function. A FE-ABC method is used to calculate the radar cross section (RCS) and radiation pattern of a cavity-backed patch antenna which is recessed within a metallic surface. It is shown that this approach is accurate for RCS and antenna pattern calculations with an ABC surface displaced as little as 0.3 lambda from the cavity aperture. These patch antennas may have a dielectric overlay which may also be modeled with this technique.

Volakis, J. L.↗
NASA NTRS1994

Dirbe evidence for a wrap in the interstellar dust layer and stellar disk of the galaxy

The Diffuse Infrared Background Experiment (DIRBE) of the Cosmic Background Explorer (COBE) has mapped the surface brightness distributions of the Galactic plane at wavelengths from 1.25 to 240 micrometers. In these maps the latitude of peak brightness, as a function of longitude, traces a roughly sinusoidal curve of period approximately 360 deg. In the far-infrared, where emission by interstellar dust dominates the surface brightness, this curve agrees well with that derived from maps of the velocity-integrated H 1, suggesting that the layers of dust and neutral atomic hydrogen are similarly displaced from the Galactic plane. In the near-infrared (lambda less than 5 micrometers), where old disk stars dominate the emission, the brightness crest exhibits the same phase but roughly half the amplitude. The reduced amplitude of the warp in stellar light could result from a lesser warping of the stellar disk, or from a more rapid falloff of the density of stars relative to the density of gas, possibly due to a radial truncation of the disk.

Freudenreich, H. T.↗
NASA NTRS1995

Braiding And Wrapping Tape To Make A Composite Vessel

Braiding and forming combined in one-step process. In process, continuous plus or minus 45 degrees bias braided tape fabricated. Braiding done on site, and braided tape immediately wound on male mandrel in shinglelike configuration to make fabric preform. Subsequently, preform impregnated with matrix resin. Improved process does not produce stitches. Expected to yield consistent quality, to involve less handling of fabric, to produce less scrap, and thus to cost less.

Freitas, Glenn↗
NASA NTRS1997

Scalable Wrap-Around Shuffle Exchange Network with Deflection Routing

The invention in one embodiment is a communication network including plural non-blocking crossbar nodes, first apparatus for connecting the nodes in a first layer of connecting links, and second apparatus for connecting links independent of the first layer, whereby each layer is connected to the other layer at each point of the nodes. Preferably, each one of the layers of connecting links corresponds to one recirculating network topology that closes in on itself.

Monacos, Steve P.↗