Search NASA⌕ Search

SEARCH · Search NASA

Results for “zone of influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Analysis of surface tension driven flow in floating zone melting

Surface tension driven flow in a cylindrical melt suspended between two rods was investigated by numerical solution of the steady state differential equations for heat and momentum transfer. Radiation heating and electron beam heating were considered approximately. For small values of the driving force, one rotating ring was formed in the top half of the zone, and its mirror image in the bottom half. At larger driving forces, secondary cells form which probably would undergo oscillatory motion. The influence of Prandtl number, zone movement, and buoyancy on the convection was also studied. The primary resistance to mass transfer in the laminar regime was in the center of the zone rather than at the solid-liquid interfaces.

Chang, C. E.↗
NASA NTRS1995

Effect of turbulence models on criticality conditions in swirling flows

The critical state of vortex cores downstream of vortex breakdown has been studied. Base vortical flows were computed using the Reynolds-averaged, axisymmetric Navier-Stokes equations. Standard K - epsilon, RNG and second-order Reynolds stress models were employed. Results indicate that the return to supercriticality is highly dependent on the turbulence model. The K - epsilon model predicted a rapid return of the vortex to supercritical conditions, the location of which showed little sensitivity to changes in the swirl ratio. The Reynolds stress model predicted that the vortex remains subcritical to the end of the domain for each of the swirl ratios employed, and provided results in qualitative agreement with experimental work. The RNG model produced intermediate results, with a downstream movement in the critical location with increasing swirl. Calculations for which area reductions were introduced at the exit in a subcritical flow were also performed using the Reynolds stress model. The structure of the resulting recirculation zone was altered significantly. However, when area reductions were employed within supercritical flows as predicted using the two-equation models, no significant influence on the recirculation zone was noted.

Gatski, Thomas B.↗
DOE OSTI2021

Data From: Influence of Hydrological Perturbations and Riverbed Sediment Characteristics on Hyporheic Zone Respiration of CO2 and N-2, Journal of Geophysical Research-Biogeosciences

This data package contains pumping data (.txt), parameter matrices, and R code (.R, .RData) to perform bootstrapping for parameter selection for the bioclogging model development. The pumping data were collected from the Russian River Riverbank Filtration site located in Sonoma County, California from 2010-2017 from three riverbank collection wells located alongside the study site. The pumping data is directly correlated with water table oscillations, so the code performs these correlations and simulates stochastic versions of water table oscillations. See Metadata Description.pdf for full details on dataset production. This dataset must be used with the R programming language. This dataset and R code is associated with the publication "Influence of Hydrological Perturbations and Riverbed Sediment Characteristics on Hyporheic Zone Respiration of CO2 and N-2"This research was supported by the Jane Lewis Fellowship from the University of California, Berkeley, the Sonoma County Water Agency (SCWA), the Roy G. Post Foundation Scholarship, the U.S. Department of Energy, Office of Science Graduate Student Research (SCGSR) Program, U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research under award DE-AC02-05CH11231, and the UFZ-Helmholtz Centre for Environmental Research, Leipzig, Germany.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1997

The Influence of a Rotating Magnetic Field on Solidification from a Traveling Solvent Zone

Application of a high frequency rotating magnetic field (50-400Hz) (RMF) with a strength of the order of 1 mT can be used to influence the fluid flow in an electrically conductive melt. The advantage of the RMF during the traveling solvent zone method for growth of semiconductor materials will be discussed. Preliminary modeling results for cadmium telluride growth from a tellurium solvent zone will be discussed.

Gillies, Donald C.↗
NASA NTRS1972

Inner-zone energetic-electron repopulation by radial diffusion.

Quantitative study of the intrusion of natural electrons into the inner radiation zone during and after the geomagnetic storm of Sept. 2, 1966. It is shown that the transport is consistent with a radial-diffusion mechanism in which the first two invariants are conserved. Except for the three-day period of the storm main phase when data were missing, the radial-diffusion coefficient is found to have a value which could be produced by a variation of a large-scale electric field across the magnetosphere having an amplitude of 0.28 mV/m and a period of 1600 sec. Electric fields having approximately these characteristics have been inferred from previous observations of the motion of whistler ducts within the plasmapause. If fields of this amplitude and period exist throughout the magnetosphere, the radial diffusion of all geomagnetically trapped particles except the high-energy inner-zone protons is strongly influenced by electric-field variations. A comprehensive review of previously reported radial-diffusion coefficients shows reasonable agreement for L less than about 3.0, but serious discrepancies among reported values exist for determinations made in the outer zone. These discrepancies cannot be explained by the simple theory of radial diffusion due to variation of large-scale electric or magnetic fields.

Tomassian, A. D.↗
DOE OSTI2023

A General Method for Estimating Zonal Transmission Interface Limits from Nodal Network Data: Preprint

Capacity expansion models for the electric power system often employ zonal (rather than nodal) resolution, necessitating estimates of aggregate power transfer limits across the interfaces between model zones. Interface limits between planning areas are sometimes published, but they are not generalizable to arbitrary zone shapes. There is thus a need for a reproducible method for estimating interface transfer limits (ITLs) between user-defined zones directly from nodal transmission system data. Here, we present a simple method for estimating ITLs using a DC power flow approximation via the power transfer distribution factor (PTDF) matrix. Linear optimization is performed to identify the distribution of power flows that maximizes the total flow on interface-crossing lines, subject to individual line ratings, limits on bus injection/withdrawal, and the relationships among flows, injections, and withdrawals imposed by the PTDF matrix. We demonstrate the application of the method on a 134-zone ~65000-bus system, and we explore the influence of flow direction, contingency level, and zone size on the estimated ITLs. There is significant heterogeneity in the ratio of the ITL to the sum of interface-crossing line ratings, which highlights the importance of accounting for the physical constraints on power flows imposed by Kirchhoff's laws when estimating zonal ITLs.

17 WIND ENERGY↗
DOE OSTI2025

Urban morphology from a landscape perspective: How building morphology distribution land models (BMDLM) emulate pattern and process

Urban form (e.g., building morphology such as height or footprint) can be used to predict environmental footprints, such as energy/water consumption and carbon emissions. Although progress has been made in predicting building characteristics to fill gaps in observation or derive 3-D representations, the relationships between morphology and other variables such as land use and population are poorly understood. Understanding these relationships may enable projections for how cities will evolve with landscapes in the future. A suite of random forest models, the Building Morphology Distribution Land Models (BMDLM), was developed to determine how well building morphology for two distinct statistical measures (central tendency and frequency) can be predicted using land use (e.g., zoning) and population at different resolutions. Clark County, Nevada and Los Angeles County, California are explored as case studies. Generally, 1-km models outperformed 30-m models. Frequency distribution models had the best performance, especially in LA County. Frequency models significantly outperformed spatial autocorrelative models using inverse distance weighting (IDW). BMDLM offers a new take on modeling urban form in which generalized landscape patterns are characterized to understand the influence of population and zoning on urban development, as described by urban scaling theory.

Sturtevant, Jillian [Baylor Univ., Waco, TX (Unite↗
DOE OSTI2025

Sediment transport and morphodynamic changes due to upstream variation and sea level rise on the Western Mekong Delta, Vietnam

The hydrological and morphological dynamics across the Vietnam Mekong Delta (VMD) coastline are increasingly shaped by human interventions and climate change, affecting the sustainability of socio-economic environments. This study employs the TELEMAC-MASCARET modeling system (TELEMAC-2D, TOMAWAC, and SISYPHE modules) to simulate hydrodynamics, sediment transport, and morphological changes for a 10-year period under baseline (SC1) and future climate (SC2) scenarios, considering wave climatology of Northeast (NEM) and Southwest monsoons (SWM). The results of sedimentation and erosion were analyzed across five key coastal zones from Ca Mau Cape (KV1) to Ha Tien (KV5). Model results highlight distinct seasonal patterns of sediment redistribution shaped by monsoonal flows, wave action, and seabed morphology. During the NEM, sediment deposition is concentrated near estuarine zones, while the SWM favors offshore sediment accumulation due to perpendicular wave actions, and shallow, gently sloping bathymetry that dissipates wave energy. Coastal erosion predominantly occurs at convex shoreline features subjected to stronger coastal currents, particularly in fine-grained sediment areas. Under future sea level rise and land subsidence scenarios, reduced flow velocities lead to lower bottom shear stress, promoting deposition and mitigating erosion problems despite increased wave energy. Besides that, sediment transport analyses across 14 cross-sections (C-S) reveal a southward trend during the NEM and a northward reversal during the SWM, with upstream sediment reductions primarily influencing near-estuarine zones and exerting minimal impact beyond the mid-coastal regions. Furthermore, these findings advance the understanding of sediment redistribution processes under climate change and seasonal change, and provide a scientific basis for adaptive coastal management and sustainable development.

Climate change↗
DOE OSTI2025

Meshfree simulation and prediction of recrystallized grain size in friction stir processed 316L stainless steel

Friction stir processing (FSP) is a promising solid-phase microstructural modification technique that can repair and enhance damaged stainless steel surfaces exposed to harsh environments. The quality of the repaired material is closely correlated to the recrystallized grain size in the stir zone (SZ), which is influenced by the thermomechanical conditions dictated by FSP process parameters. Thus, establishing a reliable relationship between these parameters and recrystallized grain size in the SZ is crucial for optimizing repair quality. However, existing experimental approaches often rely on indirect temperatures measured far from the SZ, along with rough strain rate estimations, which are imprecise and time-consuming. Meanwhile, existing mesh-based modeling methods usually face numerical challenges when dealing with the large material deformations inherent in FSP. Here, to address these issues, this study introduces a meshfree process model for FSP based on the smoothed particle hydrodynamics (SPH) method, aimed at predicting process conditions under different parameters. The model is validated using experimental data from 11 combinations of tool traverse and rotation speeds on 316 L stainless steel. Correlations between process parameters, material flow, temperature, strain, strain rate, and recrystallized grain size are revealed through SPH simulations and electron backscatter diffraction (EBSD) imaging. The results show that in situ SZ temperatures range from 1071 to 1322°C, which exceed the tool temperature by over 300°C. Furthermore, SZ temperature, strain rate, and grain size increase monotonically with higher tool temperature and faster traverse speed. A relationship is then established between the model-predicted Zener-Hollomon parameter and the recrystallized grain size based on EBSD data, expressed as ln(d) = -0.364 ln(Z) + 14.673. Finally, this relationship exhibits satisfactory accuracy with errors of less than 26.9% in predicting grain sizes at various SZ locations, which offers valuable insights for optimizing FSP repair processes for 316 L stainless steel.

316L stainless steel↗
DOE OSTI2024

Mixing and dilution controls on marine CO 2 removal using alkalinity enhancement

Marine CO 2 removal (CDR) using enhanced-alkalinity seawater discharge was simulated in the estuarine waters of the Salish Sea, Washington, US. The high-alkalinity seawater would be generated using bipolar membrane electrodialysis technology to remove acid and the alkaline stream returned to the sea. Response of the receiving waters was evaluated using a shoreline resolving hydrodynamic model with biogeochemistry, and carbonate chemistry. Two sites, and two deployment scales, each with enhanced TA of 2997 mmol m -3 and a pH of 9 were simulated. The effects on air-sea CO 2 flux and pH in the near-field as well as over the larger estuary wide domain were assessed. The large-scale deployment (addition of 164 Mmoles TA yr -1 ) in a small embayment (Sequim Bay, 12.5 km 2 ) resulted in removal of 2066 T of CO 2 (45% of total simulated) at rate of 3756 mmol m -2 yr -1 , higher than the 63 mmol m -2 yr -1 required globally to remove 1.0 GT CO 2 yr -1 . It also reduced acidity in the bay, ΔpH ≈ +0.1 pH units, an amount comparable to the historic impacts of anthropogenic acidification in the Salish Sea. The mixing and dilution of added TA with distance from the source results in reduced CDR rates such that comparable amount 2176 T CO 2 yr -1 was removed over >1000 fold larger area of the rest of the model domain. There is the potential for more removal occurring beyond the region modeled. The CDR from reduction of outgassing between October and May accounts for as much as 90% of total CDR simulated. Of the total, only 375 T CO 2 yr -1 (8%) was from the open shelf portion of the model domain. With shallow depths limiting vertical mixing, nearshore estuarine waters may provide a more rapid removal of CO 2 using alkalinity enhancement relative to deeper oceanic sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Structural Characterization of Potential Carbon Dioxide Reservoirs and Adjacent Strata within the Llandovery Silurian to Middle Devonian Strata of Ohio

The Midwest Regional Carbon Sequestration Partnership (MRCSP) has incorporated the work of geologic research teams (Geoteams) in its regional characterization, project planning and carbon dioxide (CO 2 ) injection implementation work since the partnership was established by the U.S. Department of Energy (DOE) in 2003. Over this 16-year period, the cohort of Geoteams has grown from five to ten states and has contributed to the characterization of geologic sequestration opportunities, refinement of reservoir and seal data, and supported injection efforts through both predictive and post-injection assessments. This report details the work led by the Ohio Department of Natural Resources, Division of Geological Survey to evaluate the structure of nine formations in the Appalachian Basin of Ohio to assess seal integrity and whether carbon dioxide (CO 2 ) migration pathways could pose a potential risk. As part of Phase II MRCSP work, the Pennsylvania Geological Survey led the characterization of the Llandovery Silurian (“middle Silurian”) to Middle Devonian regional geologic characterization CO 2 utilization and storage. This preliminary assessment included generalized, regional-scale mapping, as well as the development of relatively coarse structure and isochore maps of stratigraphic intervals of interest for the Appalachian Basin. Because this stratigraphic interval offers several enhanced oil recovery targets and secondary targets for CO 2 storage, the Ohio Geological Survey undertook efforts in Phase III to characterize the Ohio’s portion of the Appalachian Basin more precisely and to resolve inconsistencies within Ohio’s formation tops. This study refined the subsurface correlations of the Silurian-through-Devonian stratigraphic section in Ohio. Higher-resolution isochore mapping of the CO 2 storage reservoirs and seals provides greater detail of potential high-porosity zones and potential structural influence on the interval.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1981

Short and long term variations in the solar constant

Short and long term variations in the solar constant are examined theoretically. The variations observed by the Solar Maximum Mission, lasting several days and associated with the passage of sunspot groups, strikingly demonstrates the well known lack of a bright ring effect around sunspots. This suggests that sunspot magnetic fields do not simply block the heat flowing upward into the photosphere. Rather, it is suggested that gravitational draining occurs; this cools sunspots and transports downward the heat that would otherwise flow into the photosphere. A model of sunspot temperature with depth shows modest support when compared with the empirical model of Van't Veer. Secular trends in the solar constant may occur and be associated with the influence of the convection zone magnetic field upon convective heat transport. As a start to understanding this problem, the Schwarzschild criterion has been modified to include the effects of magnetic field.

Schatten, K. H.↗
NASA NTRS1983

The influence of the tropics on the prediction of ultralong waves. I - Tropical wind field

The effects of tropical wind data from the FGGE and tropical latent heating on numerical modeling of ultralong waves are considered in a two-part study. The model studied is the global fourth-order GLAS general circulation model, an energy-conserving format with horizontal differences calculated with fourth-order accuracy. Data assimilation experiments were performed with and without the wind data, with account taken of eastward and northward wind components, the geopotential height, and the relative humidity, all over pressure surfaces. The initial conditions were used to generate six pairs of forecasts, and the tropical wind error decreased after two days of prediction when the initial conditions contained the wind data. The deviations from the measured planetary wave data were attributed to differences in the initial rotational wind field, which varied on a three-day basis. The latent heat initial data had a five-day period and extended its influence beyond the tropical zone. The tropical heat sources sustained the tropical westerlies in the GLAS model, and removal of the tropical heat sources reversed the wind to easterlies.

Baker, W. E.↗
NASA NTRS1992

Environmental fatigue of an Al-Li-Cu alloy. Part 2: Microscopic hydrogen cracking processes

Based on a fractographic analysis of fatigue crack propagation (FCP) in Al-Li-Cu alloy 2090 stressed in a variety of inert and embrittling environments, microscopic crack paths are identified and correlated with intrinsic da/dN-delta K kinetics. FCP rates in 2090 are accelerated by hydrogen producing environments (pure water vapor, moist air, and aqueous NaCl), as defined in Part 1. For these cases, subgrain boundary fatigue cracking (SGC) dominates for delta K values where the crack tip process zone, a significant fraction of the cyclic plastic zone, is sufficiently large to envelop 5 micron subgrains in the unrecrystallized microstructure. SGC may be due to strong hydrogen trapping at T1 precipitates concentrated at sub-boundaries. At low delta K, the plastic zone diameter is smaller than the subgrain size and FCP progresses along (100) planes due to either local lattice decohesion or aluminum-lithium hydride cracking. For inert environments (vacuum, helium, and oxygen), or at high delta K where the hydrogen effect on da/dN is small, FCP is along (111) slip planes; this mode does not transition with increasing delta K and plastic zone size. The SGC and (100) crystallographic cracking modes, and the governing influence of the crack tip process zone volume (delta K), support hydrogen embrittlement rather than a surface film rupture and anodic dissolution mechanism for environmental FCP. Multi-sloped log da/dN-log delta K behavior is produced by changes in process zone hydrogen-microstructure interactions, and not by purely micromechanical-microstructure interactions, in contradiction to microstructural distance-based fatigue models.

Robert S Piascik↗
NASA NTRS1992

East-west ion drifts at mid-latitudes observed by Dynamics Explorer 2

The effects of the dynamo electric fields and the penetration of high-latitude electric fields on zonal ion drifts were investigated by examining east-west ion drifts at mid-latitudes observed during magnetically quiet and disturbed periods by the polar orbiting DE-2 spacecraft. The influences of the electric field sources can be summarized as follows: (1) semidiurnal and terdiurnal tides are most important during quiet times between 25 deg and 55 deg magnetic local time, (2) the influence of the disturbance dynamo and magnetospheric penetration field are seen on average down to 45 deg during quiet times and down to 35 deg during disturbed times, and (3) direct influence of the auroral zone electric field is important on average down to 60 deg during quiet times and down to 50 deg during disturbed times.

Heelis, R. A.↗