Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Roughness Reduction of Additively Manufactured Steel by Electropolishing

Improving surface finishing is the critical step in the application of an additively manufactured (AM) component in high fatigue and corrosion-sensitive fields. This paper provides insights into surface properties of electropolished AM component made up of 316 stainless steel with > 6% carbon. We performed surface analysis with profilometer, scanning electron microscope, and AFM to investigate the electropolished and unpolished AM components. The first major discovery of the present work is that our optical profilometry study provided an estimate of the amount of material to be removed to achieve a shiny and smooth surface on 316 stainless steel AM part. One needs to remove more than 200 μm thick layer from the surface to make a mirror-smooth surface. Such estimation can enable researchers to incorporate requisite tolerance during the design stage itself. The second important finding of our work is that ultrasmooth microstructure on the AM surface appeared when preferential material removal occurred along the boundary of the hexagonal microscopic features. Additionally, our optical profilometry studies provided an analysis of several roughness parameters on the electropolished surface. Electropolishing was effective in reducing the surface roughness below ~ 0.1 μm RMS over microscopic regions. Observation of sub-μm RMS roughness was consistently observed with the optical profilometer, SEM, and AFM. SEM study revealed a significant change in the microstructure of the electropolished samples in a medium and highly smooth state. Here, we also conducted a water contact angle study and spectroscopic reflectance study on electropolished and unpolished AM component surfaces. Our study revealed that electropolishing is a highly promising route for improving the surface finishing of AM components.

36 MATERIALS SCIENCE↗

Novel Thin Film Composite Nanofiltration Membrane Using Monoethanolamine (MEA) and Diethanolamine (DEA) with m-Phenylenediamine (MPD)

A novel thin-film composite (TFC) nanofiltration membrane was prepared by interfacial polymerization of polyamide layer on a polyethersulfone support, using monoethanolamine (MEA) and diethanolamine (DEA) with m-phenylenediamine as monomers and trimesoyl chloride (TMC) as crosslink agent. The membrane surface before and after using aminoalcohol monomers (MEA and DEA) was investigated in detail using ATR-FTIR, TGA, AFM and SEM. The AFM and SEM images showed that addition of MEA and DEA had a strong impact on surface morphology. The polyamide layer thickness of control and modified TFC membranes based on MEA and DEA were calculated to be in 180–230 nm range and the mean pore sizes were about 0.35–1.2 nm. The RO performance tests indicated that addition of MEA and DEA can increase the NaCl and Na{sub 2}SO{sub 4} rejection remarkably with little decline in the pure water permeation flux.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ground State Structure of BaFeO{sub 3}: Density Functional Theory Calculations

Using density functional theory calculations, the ground state structure of BaFeO{sub 3} (BFO) is investigated with local spin density approximation (LSDA). Cubic, tetragonal, orthorhombic, and rhombohedral types BFO are considered to calculate the formation enthalpy. The formation enthalpies reveal that cubic is the most stable structure of BFO. Small energy difference between the cubic and tetragonal suggests a possible tetragonal BFO. Ferromagnetic (FM) and anitiferromagnetic (AFM) coupling between the Fe atoms show that all the striochmetric BFO are FM. The energy difference between FM and AFM shows room temperature ferromagnetism in cubic BFO in agreement with the experimental work. The LSDA-calculated electronic structures are metallic in all studied crystallographic phases of BFO. Calculations including the Hubbard potential U, i.e. LSDA + U, show that all phases of BFO are half-metallic consistent with the integer magnetic moments. The presence of half-metallicity is discussed in terms of electronic band structures of BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic and Magnetic Properties of Cubic Fe{sub 4}C from First-Principles

First-principles calculations, based on density functional theory (DFT), are used to study the phase stability, elastic, magnetic, and electronic properties of cubic (c)-Fe{sub 4}C. Our results show that c-Fe{sub 4}C has ferromagnetic (FM) ground state as compared with antiferromagnetic (AFM) and nonmagnetic (NM) states. To study the phase stability of c-Fe{sub 4}C, BCC Fe{sub 4}C, FCC Fe{sub 4}C, and BCC Fe{sub 16}C, where C is considered at tetrahedral and octahedral interstitial sites, are also considered. The formation energy of c-Fe{sub 4}C is smaller than BCC Fe{sub 4}C but the shear moduli of c-Fe{sub 4}C is negative in both the FM and AFM states indicating that c-Fe{sub 4}C is dynamically not stable in the magnetic (FM/AFM) state. NM state has positive shear moduli which illustrates that the instability in c-Fe{sub 4}C is due to magnetism and can lead to soft phonon modes. The calculated formation energy also shows that c-Fe{sub 4}C has higher formation energy than the FCC Fe{sub 4}C indicating no possibility of c-Fe{sub 4}C in low carbon steels at low temperature. The magnetic moment of Fe in c-Fe{sub 4}C is also sensitive to lattice deformation and the electronic structure reveals the itinerant nature of electrons responsible for metallic behavior of c-Fe{sub 4}C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties in Nonmagnetic Metal Atom Adsorption on SiC Monolayer: First-Principles Study

The structural, electronic, and magnetic properties of adsorbed SiC monolayer with a series of nonmagnetic metal atoms, including Al, Ga, Li, Mg, and Na, are systematically investigated using first-principles calculations. Magnetic behavior shows in the Al-, Ga-, Li-, and Na-adsorbed systems, and both nonmagnetic metals and their neighboring Si/C atoms contribute to the magnetism. Meanwhile, due the most stable structure of Al-adsorbed SiC monolayer, we investigated the magnetic interaction between two Al atoms. A long-range antiferromagnetic (AFM) is always observed as the Al-Al distance increases. Our results show that the two-Al-adsorbed 2D SiC exhibits an AFM order due to the p-p hybridization mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Structural, Electronic, and Magnetic Properties of Cubic Perovskite La{sub 1−x}Ba{sub x}MnO{sub 3} (0.125 ≤ x ≤ 0.875) for Spintronic Devices

In this study, La{sub 0.5}Ba{sub 0.5}MnO{sub 3} has been synthesized by hydrothermal method. Crystal structure and morphology are determined by x-ray diffraction and scanning electron microscopy. It is observed that Ba-doped LaMnO{sub 3} (LMO) has the same cubic crystal structure as the host material with space group Pm3̄m. Half of the La atoms are replaced by Ba in the composition. Further, the electronic and magnetic structures are investigated by solving the Kohn-Sham equation with the full-potential linearized augmented plane wave method (FP-LAPW), with GGA+U approximation for exchange and correlation, for Ba concentration from 12.5 to 87.5%. The system is half-metallic ferromagnetic (FM) up to 55% and then converts into anti-ferromagnetic (AFM). This happens due to the onset of super exchange on increasing Ba concentrations. It is suggested that Ba-doped LMO is the best material for the fabrication of an exchange-biased spin valve. The spacer material can be any non-magnetic cubic perovskite such as BaTiO{sub 3} while the FM and AFM layers can be made of Ba-doped LMO with different concentrations of Ba. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proximity Effects of Superconductivity and Antiferromagnetism in a Nanowire

In this paper, we theoretically study the proximity effects of s-wave superconductivity(SC) and antiferromagnetism(AFM) in a nanowire. For the half-filling case, it was found that the Andreev bound states form near the boundary between the AFM and the SC which are accompanied by the strongly localized p-wave pairing. These in-gap states remain when the system is slightly doped. For the electron or hole doped system, they merge into the upper or the lower antiferromagnetic bands gradually with the increase of doping, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physical properties of RF magnetron sputtered GaN/n-Si thin film: impacts of RF power

GaN thin film was successfully produced on n-Si(100) substrate by RF magnetron sputter under different RF power. Experimental measurement techniques such as UV/Vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and Micro-Raman Spectroscopy were used to research effects of Radio Frequency power on physical properties of produced thin film. It has been found that produced thin film was polycrystalline structure with (100) and (110) planes of hexagonal GaN from X-ray diffraction measurement result. It also proved that increasing RF power gives rise to deterioration in crystal quality of GaN thin film. Reason of this deterioration was discussed. It has been achieved that increasing RF power has resulted in decreasing optical band gap energy of GaN thin film. Reasons for these changes in optical band gap energy were explained. It was seen that some thin films were grown as layer-plus-island mode (Stranski–Krastanov growth mode) and others were grown as layer-by-layer growth mode (Frank van der Merwe mode) from AFM analysis. It has been found that increasing RF power has resulted in improvement of surface morphology of thin film from field emission scanning electron microscopy analysis. However, reaching RF power to 125 W leads to start to deteriorate of surface of GaN thin film. The reasons for this have been discussed. E{sub 1}(TO) transverse optical phonon mode of hexagonal GaN with different intensity was detected from Micro-Raman Spectroscopy measurement. The reasons for this difference have been discussed. It was concluded that RF power has played a significant role in growing high quality GaN thin film. Morphological, structural, and optical properties of GaN thin film were enhanced by controlling RF power, making them a potential candidate for LED, solar cell, diode application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and optical properties of ZnO thin films grown by rapid atmospheric mist chemical vapor technique

In this work, the effect of deposition time on the structural and optical properties of ZnO films deposited by Ultrasonic Spray Mist-CVD was studied aiming the application in perovskite solar cells, as holes blocking layer. Crystallinity, surface morphology and optical properties of the ZnO films were investigated by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), conventional and Photoluminescence (PL) spectroscopies, respectively. The XRD measurement proves the existence of the hexagonal wurtzite phase and a high degree of crystallinity with [001] preferential orientation. The SEM study shows that the films possess a compact structure. Smooth and homogenous surface was confirmed also by AFM. The obtained results indicate that ZnO films deposited by a simple, safe and cost-effective method present a great potential for application in perovskite solar cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving Corrosion Resistance of 316L Austenitic Stainless Steel Using ZrO{sub 2} Sol-Gel Coating in Nitric Acid Solution

In this study, thin-film coating of zirconium oxide (ZrO{sub 2}) was prepared by sol-gel method and subsequent heat treatment process. The sol was prepared by controlled hydrolysis of zirconium tetrapropoxide using acetic acid and ethanol/acetylacetone mixture as catalyst and chelating agent, respectively, and finally deposited onto the 316L austenitic stainless steel (316L SS) using dip coating method in order to improve its corrosion resistance in nitric acid medium. The composition, structure, and morphology of the coated surface were investigated by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The obtained results from XRD and FTIR state the formation of tetragonal and monoclinic ZrO{sub 2} phase. Also, the obtained results from surface morphology investigation by SEM and AFM indicate the formation of smooth, homogeneous and uniform coatings on the steel substrate. Then, the corrosion behavior of stainless steel was investigated in a 1 and 10 M nitric acid solutions using electrochemical impedance spectroscopy and linear polarization test. The obtained results from these tests for ZrO{sub 2}-coated specimens indicated a considerable improvement in the corrosion resistance of 316L stainless steel by an increase in corrosion potential and transpassive potential, and a decrease in passive current density and corrosion current density. The decrease in passive current density in both the concentration of solutions was two orders of magnitude from bare to coated specimens.

36 MATERIALS SCIENCE↗

Inhibiting and Remodeling Toxic Amyloid-Beta Oligomer Formation Using a Computationally Designed Drug Molecule That Targets Alzheimer’s Disease

Alzheimer’s disease (AD) is rapidly reaching epidemic status among a burgeoning aging population. Much evidence suggests the toxicity of this amyloid disease is most influenced by the formation of soluble oligomeric forms of amyloid β-protein, particularly the 42-residue alloform (Aβ42). Developing potential therapeutics in a directed, streamlined approach to treating this disease is necessary. Here we utilize the joint pharmacophore space (JPS) model to design a new molecule [AC0107] incorporating structural characteristics of known Aβ inhibitors, blood-brain barrier permeability, and limited toxicity. To test the molecule’s efficacy experimentally, we employed ion mobility mass spectrometry (IM-MS) to discover [AC0107] inhibits the formation of the toxic Aβ42 dodecamer at both high (1:10) and equimolar concentrations of inhibitor. Atomic force microscopy (AFM) experiments reveal that [AC0107] prevents further aggregation of Aβ42, destabilizes preformed fibrils, and reverses Aβ42 aggregation. This trend continues for long-term interaction times of 2 days until only small aggregates remain with virtually no fibrils or higher order oligomers surviving. Pairing JPS with IM-MS and AFM presents a powerful and effective first step for AD drug development. .

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Image Processing Pipeline for Fluoroelastomer Crystallite Detection in Atomic Force Microscopy Images

Phase transformations in materials systems can be tracked using atomic force microscopy (AFM), enabling the examination of surface properties and macroscale morphologies. In situ measurements investigating phase transformations generate large datasets of time-lapse image sequences. The interpretation of the resulting image sequences, guided by domain-knowledge, requires manual image processing using handcrafted masks. Here this approach is time-consuming and restricts the number of images that can be processed. Her in this study, we developed an automated image processing pipeline which integrates image detection and segmentation methods. We examine five time-series AFM videos of various fluoroelastomer phase transformations. The number of image sequences per video ranges from a hundred to a thousand image sequences. The resulting image processing pipeline aims to automatically classify and analyze images to enable batch processing. Using this pipeline, the growth of each individual fluoroelastomer crystallite can be tracked through time. We incorporated statistical analysis into the pipeline to investigate trends in phase transformations between different fluoroelastomer batches. Understanding these phase transformations is crucial, as it can provide valuable insights into manufacturing processes, improve product quality, and possibly lead to the development of more advanced fluoroelastomer formulations.

36 MATERIALS SCIENCE↗

Machine learning-driven descriptions of protein dynamics at solid-liquid interfaces

This chapter has described how ML has enabled quantitative analysis of HS-AFM data to discover the physical phenomena governing protein dynamics and ordering at solid-liquid interfaces. The research detailed in this chapter modeled the rotation models of protein nanorods, the discovery of which would otherwise not be possible. By tracking the trajectories of individual protein rods from frame to frame, it was possible to model Brownian type motion and behaviors and Levy-flight dynamics that had not previously been shown. We also described the application of the Python package AtomAI, which has been developed specifically to analyze and extract physical phenomena, providing exemplar code for training an ensemble of deep neural networks to produce the semantic segmentation of AFM data and functions for encoding and decoding local environments. We last described a combinatorial approach to analyze very noisy data with a densely covered substrate where the emergence of order for the protein liquid crystals could be elucidated. By combining the methods from Case 1 and 2, it was possible to obtain the center of mass and angle for each rod in the images and track the assembly of the rods over time into a 2D liquid crystal array on the surface of mica.

protein dynamics, solid-liquid interfaces, atomic ↗

Effect of proteoglycans at interfaces as related to location, architecture, and mechanical cues

Covalently bound functional GAGs orchestrate tissue mechanics through time-dependent characteristics. The role of specific glycosaminoglycans (GAGs) at the ligament-cementum and cementum-dentin interfaces within a human periodontal complex were examined. Matrix swelling and resistance to compression under health and modeled diseased states was investigated. The presence of keratin sulfate (KS) and chondroitin sulfate (CS) GAGs at the ligament-cementum and cementum-dentin interfaces in human molars (N = 5) was illustrated by using enzymes, atomic force microscopy (AFM), and AFM-based nanoindentation. Furthermore, the change in physical characteristics of modeled diseased states through sequential digestion of keratin sulfate (KS) and chondroitin sulfate (CS) GAGs was investigated. One-way ANOVA tests with P < 0.05 were performed to determine significant differences between groups. Additionally, the presence of mineral within the seemingly hygroscopic interfaces was investigated using transmission electron microscopy. Immunohistochemistry (N = 3) indicated presence of biglycan and fibromodulin small leucine rich proteoglycans at the interfaces. Digestion of matrices with enzymes confirmed the presence of KS and CS GAGs at the interfaces by illustrating a change in ti ssue architecture and mechanics. A significant increase in height (nm), decrease in elastic modulus (GPa), and tissue deformation rate (nm/s) of the PDL-C attachment site (215 ± 63-424 ± 94 nm; 1.5 ± 0.7-0.4 ± 0.2 GPa; 21 ± 7-48 ± 22 nm/s), and cementum-dentin interface (122 ± 69-360 ± 159 nm; 2.9 ± 1.3-0.7 ± 0.3 GPa; 18 ± 4-30 ± 6 nm/s) was observed. The sequential removal of GAGs indicated loss in intricate structural hierarchy of hygroscopic interfaces. From a mechanics perspective, GAGs provide tissue recovery/resilience. Our results provide insights into the role of GAGs toward conserved tooth movement in the socket in response to mechanical loads, and modulation of potentially deleterious strain at tissue interfaces.

59 BASIC BIOLOGICAL SCIENCES↗

Detection of erythrocytes influenced by aging and type 2 diabetes using atomic force microscope

The pathophysiological changes of erythrocytes are detected at the molecular scale, which is important to reveal the onset of diseases. Type 2 diabetes is an age-related metabolic disorder with high prevalence in elderly (or old) people. Up to now, there are no treatments to cure diabetes. Therefore, early detection and the ability to monitor the progression of type 2 diabetes are very important for developing effective therapies. Type 2 diabetes is associated with high blood glucose in the context of insulin resistance and relative insulin deficiency. These abnormalities may disturb the architecture and functions of erythrocytes at molecular scale. In this study, the aging- and diabetes-induced changes in morphological and biomechanical properties of erythrocytes are clearly characterized at nanometer scale using atomic force microscope (AFM). The structural information and mechanical properties of the cell surface membranes of erythrocytes are very important indicators for determining the healthy, diseased or aging status. So, AFM may potentially be developed into a powerful tool in diagnosing diseases.

60 APPLIED LIFE SCIENCES↗

Phosphorylation by Nek1 regulates opening and closing of voltage dependent anion channel 1

VDAC1 is a key component of the mitochondrial permeability transition pore. To initiate apoptosis and certain other forms of cell death, mitochondria become permeable such that cytochrome c and other pre-apoptotic molecules resident inside the mitochondria enter the cytosol and activate apoptotic cascades. We have shown recently that VDAC1 interacts directly with never-in-mitosis A related kinase 1 (Nek1), and that Nek1 phosphorylates VDAC1 on Ser193 to prevent excessive cell death after injury. How this phosphorylation regulates the activity of VDAC1, however, has not yet been reported. Here, we use atomic force microscopy (AFM) and cytochrome c conductance studies to examine the configuration of VDAC1 before and after phosphorylation by Nek1. Wild-type VDAC1 assumes an open configuration, but closes and prevents cytochrome c efflux when phosphorylated by Nek1. A VDAC1-Ser193Ala mutant, which cannot be phosphorylated by Nek1 under identical conditions, remains open and constitutively allows cytochrome c efflux. Conversely, a VDAC1-Ser193Glu mutant, which mimics constitutive phosphorylation by Nek1, remains closed by AFM and prevents cytochrome c leakage in the same liposome assays. Our data provide a mechanism to explain how Nek1 regulates cell death by affecting the opening and closing of VDAC1.

60 APPLIED LIFE SCIENCES↗

Phase separation in lipid bilayers triggered by low pH

Research highlights: {yields} Lipid bilayers have been imaged by atomic force microscopy (AFM). {yields} At pH 5 phase separation occurs in lipid bilayers containing mixed acyl chains. {yields} Phase separation does not occur when lipids have only unsaturated chains. {yields} Phase separation might drive protein clustering during endocytosis. -- Abstract: Endocytosis involves the capture of membrane from the cell surface in the form of vesicles, which become rapidly acidified to about pH 5. Here we show using atomic force microscopy (AFM) imaging that this degree of acidification triggers phase separation in lipid bilayers containing mixed acyl chains (e.g. palmitoyl/oleoyl) or complex mixtures (e.g. total brain extract) but not in bilayers containing only lipids with unsaturated chains (e.g. dioleoyl). Since mixed-chain lipids are major constituents of the outer leaflet of the plasma membrane, the type of phase separation reported here might support protein clustering and signaling during endocytosis.

60 APPLIED LIFE SCIENCES↗