Search NASA⌕ Search

SEARCH · Search NASA

Results for “CATALYSTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Understanding the origin of structure sensitivity in hydrodechlorination of trichloroethylene on a palladium catalyst

Periodic density functional theory (DFT) calculations are employed to understand the origin of structure sensitivity in hydrodechlorination (HDC) of trichloroethylene (TCE) over different facets of a palladium catalyst. The HDC reaction is simulated on the terrace (Pd (111) and Pd (100)) and undercoordinated (Pd (211) and Pd (110)) sites of the Pd catalyst. The most stable binding configuration of TCE on the Pd surfaces is observed to be through the di-σ mode of binding, wherein each carbon atom of the TCE molecule is adsorbed atop of the Pd atom. On comparing TCE adsorption over different facets of Pd, a maximum binding energy of –178 kJ mol –1 is calculated over the Pd (110) surface. TCE, upon adsorption on Pd catalyst, undergoes dechlorination followed by hydrogenation of the hydrocarbon intermediates. The activation energies for C–Cl bond dissociation steps are significantly low when compared to the hydrogenation steps. The chlorine released from dechlorination tends to block the active sites, thereby poisoning the surface with high binding energies (B.E > –160 kJ mol –1 ) on all the surfaces. The trend in chlorine binding energies on Pd facets follows: Pd (110) > Pd (211) > Pd (100) > Pd (111). The removal of surface chlorine is facilitated by its reaction with surface hydrogen to form hydrogen chloride. The activation energy for hydrogen chloride formation is calculated to be 90 kJ mol –1 and 88 kJ mol –1 on Pd (111) and Pd (100) terrace sites, respectively and 109 kJ mol –1 and 118 kJ mol –1 on the step Pd (211) and corrugated Pd (110) facets, respectively. This suggests the ease of removal of Cl as HCl from the terrace sites as compared to the step and corrugated sites. The structure sensitivity in the TCE HDC reaction could possibly arise due to the differences in the energetics of Cl removal on different Pd facets. As a result, this mechanistic understanding could provide a rationale for designing suitable catalysts for the HDC of TCE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Decoupling plasma, catalyst, and gaseous mechanisms for non-oxidative methane conversion

Direct non-oxidative methane (CH 4 ) conversion to value-added hydrogen (H 2 ) and C 2 products remains hindered by fundamental catalytic scaling constraints and rapid surface deactivation at elevated temperatures. Plasma-enabled catalysis offers a promising route to overcome the thermodynamic and kinetic barriers of direct non-oxidative methane upgrading at mild conditions, yet control over C–C product selectivity and catalyst stability remains elusive. Here, we establish a unified mechanistic framework including Langmuir–Hinshelwood (L–H) and Langmuir–Rideal (L–R) mechanisms that disentangles the roles of plasma excitation (including vibrationally activated species and radicals), surface temperature (T sur ), and catalyst binding energy in steering CH 4 conversion to H 2 and C 2 hydrocarbons. Through a combination of density functional theory (DFT) informed microkinetic modeling, in situ and ex situ surface characterization, and product quantification under dielectric barrier discharge conditions, we show that vibrationally excited CH 4 lowers activation barriers selectively for dissociative chemisorption, enabling surface activation across a wide range of transition metal catalysts at low thermal energy input. We find that once CH 4 is dissociatively chemisorbed, the branching between C 2 H 2 , C 2 H 4 , and C 2 H 6 is governed by surface properties (carbon binding energy, T sur , etc), regardless of plasma excitation. The DFT informed microkinetic model decouples the effects of molecular activation from surface properties and indentifies operating windows that maximize target yields while suppressing carbon accumulation and subsequent catalytic inactivation. Experiments on polycrystalline Cu/Al 2 O 3 , Ni/Al 2 O 3 , and Pt/Al 2 O 3 validate these predictions, revealing catalyst-dependent branching toward ethane or ethylene and distinct deactivation profiles. We unify these trends into a generalized three-dimensional plasma-thermal-catalytic design space, from which reduced descriptors such as T vib /T sur in the limit of vibrationally excited L–H pathways emerge as predictive metrics. These results enable rational tuning of methane conversion pathways and unlock selective C 2 formation using earth-abundant metals under mild plasma conditions.

catalyst inactivation↗
DOE OSTI2023

Multielectrode electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

A multielectrode-based electrochemical cell allows the structural characterization of an amorphous thin-film water oxidation catalyst under various electrochemical potentials using high-energy X-ray scattering and atomic pair distribution function (PDF) techniques. A multielectrode with five electrodes provides a sufficiently low background signal to enable high-energy X-ray scattering (HEXS) measurements and amplifies the extremely low HEXS signals from samples for high-resolution PDF analysis of in situ data from thin-film catalysts. Glassy carbon (GC) creates a relatively low intensity HEXS pattern and is used as a working electrode. Instead of a three-dimensional (3D) porous electrode architecture, the flat geometry of the electrode enables various deposition techniques to be used for the preparation of a highly conductive metal oxide layer. PDF analysis demonstrates high spatial resolution for a 230 nm thick amorphous iridium oxide film deposited on two roughened 60 µm thick GC electrodes. The PDF analysis resolves the domain size and distinguishes changes in fine structure which are directly correlated with the structure and function of the catalysts. In conclusion, the results bring the opportunity to analyze the structure of nanometre-scale amorphous thin-film catalysts in an electrolyte-compatible and compact 3D-printed electrochemical cell in a three-electrode configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Impact of Catalyst Layer Properties and Transport Layer Interactions on Rutile Iridium Oxide Anode Durability in Proton Exchange Membrane Electrolysis

The performance and durability of proton exchange membrane electrolyzers are governed by the interplay between catalyst inks and integration, the resulting catalyst layer (CL) structure, and the interface between the CL and porous transport layer (PTL). In this study, we examine the impact of these factors on cell performance and degradation using rutile IrO2 as the anode catalyst. The two commercial rutile IrO2 catalysts differ from each other and from the amorphous benchmark in agglomerate size and ink stability. This has implications for CL morphology and electronic connectivity. In the context of long-term pressurized operation for up to 1000 h, the selection of the PTL has a marginal effect on the durability of CLs with good structural and compositional properties, whereas poorly structured CLs demonstrate evident degradation when used with certain PTLs. Poor CL properties amplify the negative impact of non-ideal CL/PTL interfaces, demonstrating the importance of CL/PTL interface engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bioproduction of cerium-bearing magnetite and application to improve carbon-black supported platinum catalysts

Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III) 2 O 4 ), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L 2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Understanding the cold plasma synthesis of ammonia with model metal catalysts through plasma diagnostics (Final Report)

The industrial synthesis of ammonia, which amounts to over 200 million tons annually, is the most energy-intensive chemical process. Therefore, there is a critical need and increased interest in exploring less energetic routes to produce ammonia. Not only does ammonia have a direct impact on the food market, but also it has the potential as a fuel and hydrogen carrier. Recently, plasma catalysis has emerged as a promising alternative for synthesizing ammonia at mild (pressure, temperature and power) conditions. The key to this catalytic process is the synergy between the plasma and the catalyst, where the non-equilibrium plasma allows the generation of excited species, which recombine at the catalyst surface to form ammonia. However, our current understanding of this process is in its infancy. In this respect, model metals are ideal candidates for gaining a basic understanding of this reaction. Moreover, a major roadblock to rationally designing novel effective catalysts for plasma-assisted ammonia production is the need for fundamental aspects of this process. Through a comprehensive plan that integrates model metals as catalysts and world-class diagnostics, the proposed work aims to provide fundamental knowledge about the nature of reactive processes occurring during plasma-assisted catalysis and to demonstrate the selective production of ammonia, catalyzed by employing selected metals under non-thermal plasma conditions. Toward this goal, the central thrust of this proposal was to demonstrate that the synergy between plasma and rationally selected model metals will boost ammonia yields during plasma-assisted ammonia synthesis by delaying hydrogen recombination. Specifically, we aimed to (1) understand the formation and role of gas-phase active species such as NH, N 2 , N 2 + and Ha during the plasma-enhanced synthesis of ammonia through OES and FTIRAS using different reaction configurations: a) only plasma (non-packed DBD reactor) and b) packed DBD reactor with metal nanoparticles. This proposal was awarded/recommended with a run time on the PCRF facility FY20.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring Catalyst Compositions for Microwave-Assisted Methane Dehydroaromatization

The flaring of natural gas in U.S. shale regions remains a challenge for producers. One alternative to flaring is converting the wasted gas into valuable chemicals. Microwave-based processes offer a promising solution, potentially enabling the development of compact, modular systems for on-site production of chemicals, such as aromatics, from natural gas. This is due to the advantages of microwave heating, including efficient heating of compact volumes, accelerated reaction rates, and electrification of heating. However, developing effective catalysts for microwave-based processes is challenging, as conventional materials often require modification to be effectively heated by microwaves. This study provides an overview of a catalyst development project focused on a molybdenum-supported zeolite catalyst, optimized for the direct conversion of methane into aromatics under microwave irradiation. It details the synthesis, characterization, and the effects of promoters, as well as computational efforts undertaken to understand and enhance the catalyst's performance.

flare gas↗
DOE OSTI2025

Direct Synthesis of Polyester from Biomass Derived 1,6-hexanediol using a Copper-Ceria Catalyst

Biomass derived polyesters are gaining attention due to their increased mechanical and thermal properties, and also because of their biodegradability. These polyesters are typically synthesized from polycondensation reactions between diols with dicarboxylic acids using catalysts. Other methods such as alcoholysis and acidolysis of low molecular weight esters and alcoholysis of acyl chlorides are also well known. Direct conversion of diol to ester without using dicarboxylic acid is not well known, and to our knowledge has not been reported over a solid catalyst. In this study, we report a direct synthesis of polyester from 1,6-hexanediol using a copper-ceria catalyst without using a dicarboxylic acid monomer. The copper-ceria catalysts were synthesized by incipient wetness impregnation method and characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction analysis (XRD), Brunauer-Emmett-Teller (BET), and infrared spectroscopy (IR). Our initial studies show that 1,6-hexanediol can be converted to corresponding polyester at higher temperatures under atmospheric pressures of CO2 or N2. The reaction products were analyzed using nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), high performance liquid chromatography (HPLC), and IR spectroscopy.

Biomass derived diols↗
DOE OSTI2020

Substitution of Co with Ni in Co/Al 2 O 3 Catalysts for Fischer–Tropsch Synthesis

The effect of cobalt substitution with nickel was investigated for the Fischer–Tropsch synthesis reaction. Catalysts having different Ni/Co ratios were prepared by aqueous incipient wetness co-impregnation, characterized, and tested using a continuously stirred tank reactor (CSTR) for more than 200 h. The addition of nickel did not significantly modify the morphological properties measured. XRD, STEM, and TPR-XANES results showed intimate contact between nickel and cobalt, strongly suggesting the formation of a Co-Ni solid oxide solution in each case. Moreover, TPR-XANES indicated that nickel addition improves the cobalt reducibility. This may be due to H 2 dissociation and spillover, but is more likely the results of a chemical effect of intimate contact between Co and Ni resulting in Co-Ni alloying after activation. FTS testing revealed a lower initial activity when nickel was added. However, CO conversion continuously increased with time on-stream until a steady-state value (34%–37% depending on Ni/Co ratio) was achieved, which was very close to the value observed for undoped Co/Al 2 O 3 . This trend suggests nickel can stabilize cobalt nanoparticles even at a lower weight percentage of Co. Currently, the cobalt price is 2.13 times the price of nickel. Thus, comparing the activity/price, the catalyst with a Ni/Co ratio of 25/75 has better performance than the unpromoted catalyst. Finally, nickel-promoted catalysts exhibited slightly higher initial selectivity for light hydrocarbons, but this difference typically diminished with time on-stream; once leveling off in conversion was achieved, the C 5+ selectivities were similar (≈ 80%) for Ni/Co ratios up to 10/90, and only slightly lower (≈ 77%) at Ni/Co of 25/75.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Emissions Merit Function for Evaluating Multifunctional Catalyst Beds

With emission control regulations getting stricter, multi-functional catalyst systems are increasingly important for low-temperature operation. We investigate a wide range of multi-component catalyst systems, as physical mixtures and in multi-bed configurations, while varying the ratios of hydrocarbon traps (HCT), passive NOx adsorbers (PNAs), and diesel oxidation catalysts (DOC). Using industrially guided protocols, we measured the ability of these complex catalyst systems to reduce emissions during a 40 °C/min temperature ramp to simulate cold-start conditions. Using a temperature boundary condition of 250 °C, the average conversion was calculated for each regulated pollutant: CO, NOx, and total hydrocarbons (THC). An emissions merit function was developed to evaluate the effectiveness of each system relative to the relevant emission standards and expected engine exhaust concentrations. This merit function identified that a 1:1:4 ratio of PNA:HCT:DOC was the most effective emissions reduction configuration and had similar reactivity as a physical mixture or as a PNA→HCT→DOC multi-bed reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Organo-Nanocups Assist the Formation of Ultra-Small Palladium Nanoparticle Catalysts for Hydrogen Evolution Reaction

Ultra-small palladium nanoparticles were synthesized and applied as catalysts for a hydrogen evolution reaction. The palladium metal precursor was produced via beta-cyclodextrin as organo-nanocup (ONC) capping agent to produce ultra-small nanoparticles used in this study. The produced ~3 nm nanoparticle catalyst was then characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-Vis), and Fourier transform infrared spectroscopy (FTIR) to confirm the successful synthesis of ~3 nm palladium nanoparticles. The nanoparticles’ catalytic ability was explored via the hydrolysis reaction of sodium borohydride. The palladium nanoparticle catalyst performed best at 303 K at a pH of 7 with 925 μmol of sodium borohydride having an H 2 generation rate of 1.431 mL min -1 mL cat -1 . The activation energy of the palladium catalyst was calculated to be 58.9 kJ/mol.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Boosting the H 2 –D 2 Exchange Activity of Dilute Nanoporous Ti–Cu Catalysts through Oxidation–Reduction Cycle–Induced Restructuring

The use of nanoporous metals as catalysts has attracted significant interest in recent years. Their high-curvature, nanoscale ligaments provide not only high surface area but also a high density of undercoordinated step edge and kink sites. However, their long-term stability, especially at higher temperatures, is often limited by thermal coarsening and the associated loss of surface area. Herein, it is demonstrated that the nanoscale morphology of nanoporous Cu can be regenerated by applying oxidation/reduction cycles at 250 °C. Specifically, the morphological evolution and H 2 dissociation activity of hierarchical nanoporous Cu catalysts doped with Ti during structural rearrangement triggered by oxidative and reductive atmospheres at elevated temperatures are studied. In addition to coarsening of the structure at elevated temperatures, oxidation at 400 °C causes an expansion of the ligaments. Further, subsequent reduction at 400 °C leads to the formation of particles and a drop in the H 2 dissociation activity compared the fresh catalyst. However, performing the redox cycle at 250 °C reverses coarsening and boosts the H 2 dissociation activity for the hydrogen–deuterium (H 2 –D 2 ) reaction. Herein, the possibility to reverse coarsening is demonstrated, thereby mitigating the loss of activity frequently observed in nanoporous catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

MoS 2 Catalysts Selectively Achieve High Yield of Liquid Oxygenate from Direct Conversion of Methane via Hydroxyl Radicals

Directly converting methane (CH 4 ) into liquid oxygenates (e.g., methanol) can circumvent the cost and engineering limits of natural gas transportation and storage. However, oxygenate yields from CH 4 remain low, and sulfur present in natural gas hinders activity in most catalysts. Here, to overcome these barriers, we employ bulk molybdenum disulfide (MoS 2 ), a low-cost, robust catalyst which selectively produces large quantities of liquid oxygenates (>900 µmol/g cat ∙hr) from methane in the presence of hydroxyl (OH • ) radicals produced from dilute hydrogen peroxide (H 2 O 2 ) at 75°C. Under realistic reaction conditions, MoS 2 partially and reversibly adopts a metastable, more electrically conductive phase (1T’) that can only be observed through in situ structural probes. Herein, we elucidate that redox synergy between H 2 O 2 and MoS 2 produces active OH • radical species that selectively transform CH 4 to surface methoxy species at the gas-solid liquid interface, leading to the unitary production of liquid oxygenate at a rate competitive with more costly precious metal catalysts, without additional catalyst preparation steps.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ionic Precursors Transformed Into Vinyl Acetate Synthesis Catalyst via Reaction-Driven Restructuring

Conventional preparation of supported bimetallic catalysts relies on solution-mediated metal salt immobilization and pre-formation of alloy nanoparticles before reaction. Here, we report a fundamentally different synthesis strategy of using a physical mixture of salt precursors to generate an active catalyst during reaction. The catalytic structure is generated in situ from Pd3(OAc)6, Au(OH)3, and KOAc through H2 treatment and reaction-driven restructuring under vinyl acetate monomer (VAM) synthesis conditions. Ascertained from in situ X-ray diffraction and operando infrared spectroscopy analyses, reduction treatment produces segregated Pd and Au domains, and subsequent exposure to a VAM reaction mixture triggers dynamic extraction of Pd from the metal surface. This latter process, mediated by acetate-assisted redox cycles, facilitates Pd migration toward Au domains to form a near-surface localized Pd50Au50 alloy phase. Monometallic Pd domains serve as a reservoir of Pd to the alloy phase, leading to and sustaining a more Pd-enriched active surface and a higher population of accessible Pd sites, compared to a conventionally prepared K-PdAu/SiO2 catalyst. Consequently, this leads to a twofold increase in the VAM formation rate, demonstrating highly active bimetallic catalysts can be generated through the gas-phase treatment of physically mixed ionic precursors.

Cha, Byeong Jun [Rice University]↗
DOE OSTI2020

Direct Characterization of Atomically Dispersed Catalysts: Nitrogen-Coordinated Ni Sites in Carbon-Based Materials for CO 2 Electroreduction

Metal, nitrogen-doped carbon materials have attracted interest as heterogenous catalysts that contain MN x active sites that are analogous to molecular catalysts. Of particular interest is Ni,N-doped carbon, a catalyst that is active for the electrochemical reduction of CO 2 to CO. Critical to the understanding of these materials is proof of single atomic sites and characterization of the environment surrounding the metal atom; however, directly probing this coordination remains challenging. This challenge is addressed in this study by combining scanning transmission electron microscopy (STEM), single atom electron energy loss spectroscopy (EELS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Through STEM imaging, atomic dispersion of Ni in the carbon framework is confirmed and image analyses are utilized to give semiquantitative estimates of neighbor distance distributions and site densities of Ni atoms. Atomic resolution EELS demonstrates that N and Ni are colocated at the single Ni atom sites suggesting Ni–N coordination. ToF-SIMS reveals a distribution of NiN x C y - fragments that reflect the Ni–N bonding environments within Ni,N-doped carbon. The fragmentation from Ni,N-doped carbon is similar to Ni phthalocyanine, suggesting the existence of heterogenized, molecular-like NiN 4 active sites which motivates future studies that leverage insight from molecular catalysis design to develop next-generation heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ultrathin Microporous Transport Layers: Implications for Low Catalyst Loadings, Thin Membranes, and High Current Density Operation for Proton Exchange Membrane Electrolysis

Porous transport layers (PTL) and their surface properties have the potential to improve the performance of proton exchange membrane water electrolyzers (PEMWE), which is imperative to reduce feedstock costs and lead to their widespread implementation. This work introduces a novel generation of titanium microporous layers (MPLs) with ultra-low thicknesses of approx. 20 um which reduces raw material costs. They also feature advanced interfacial properties tailored to maximize catalyst utilization at low Ir-loadings. The bulk morphology and surface properties of the hierarchically structured PTLs are assessed by X-ray tomographic microscopy. The low surface roughness of the MPL allows the use of thinner membranes since it minimizes possible deformations in the membrane. Cells containing the MPLs outperformed those containing state-of-the-art commercially available PTL materials by up to 100 mV at 7 A cm-2 in combination with low-loaded catalyst-coated membranes of 0.4 mgIr cm-2. Hydrogen crossover is also reduced, especially at low current densities, leading to a larger turndown ratio which can enable more cost-effective operating strategies. Finally, these rationally designed MPLs also lead to high catalyst utilization by overcoming the naturally occurring high in-plane resistance of low-loaded catalyst layers.

hydrogen crossover↗
DOE OSTI2026

Hybrid Ionomer-Free Porous Transport Electrodes With Catalyst Coated Membranes for Enhanced Water Electrolysis

To promote industrial uptake of clean hydrogen production technologies such as polymer electrolyte membrane (PEM) water electrolyzers, advancements in catalyst layer (CL) morphology are required. We demonstrate how improved electrochemical performance can be achieved when using an ionomer free porous transport electrode (PTE) coupled with a traditional catalyst coated membrane (CCM) assembly in PEM water electrolyzers. Notably, we reveal that the superior performance achieved when utilizing a hybrid PTE and CCM assembly is due to enhanced ohmic performance caused by optimal contact with both the porous transport layer (PTL) and PEM interfaces. Using operando neutron radiography, we demonstrate that configurations utilizing a CCM resulted in more rapid water replenishment to reaction sites, indicating enhanced membrane hydration beneficial for performance. This enhanced membrane hydration coupled with improved contact area at the PEM-catalyst layer (CL) and PTL-CL interfaces was revealed through the reduced ohmic overpotentials of the hybrid PTE-CCM design, which achieved the lowest ohmic overpotential of 431 mV at 2000 mA cm−2. While the average in-plane water distributions are generally similar between cell configurations, we reveal that utilizing a PTE configuration promotes a more homogenous water distribution near the CL-membrane interface due to enhanced catalyst utilization.

Seip, Tess [ORNL] (ORCID:0000000232740594)↗
DOE OSTI2021

Effects of surface species and homogeneous reactions on rates and selectivity in ethane oxidation on oxide catalysts

Selective alkane oxidations on metal oxide catalysts involve complex mechanisms with multiple reactions in series and parallel, different types of reduced and oxidized surface species, and potential contributions from gas-phase reactions. We report kinetics and thermodynamics of elementary steps involved in C 2 H 6 -O 2 reactions on SiO 2 -supported small vanadium oxide domains are determined using density functional theory. These surface reactions together with gas-phase mechanisms are incorporated in kinetic simulations to determine how surface and gaseous reactions interact and contribute to rates and selectivity. The results show that gas-phase reactions within pore volumes in contact with the catalyst contribute significantly to C 2 H 6 activation rates, even at conditions where gas-phase reactions in empty volumes without catalyst are negligible. The majority of C 2 H 6 activations occur on the surface, via H abstraction by vanadium oxo species present at terminal lattice oxygens. The gas-phase activations via H-abstraction by OH radicals also exhibit significant contributions. The reduced centers formed by reactions at vanadium oxo species are re-oxidized rapidly and, therefore, are present in very small concentrations at reaction conditions. The re-oxidation steps lead to the formation of HO 2 radicals and surface peroxo species that are also rapidly consumed and are present in small concentrations. The peroxo species preferentially convert C 2 H 4 to its epoxide product and influence selectivity even at low concentrations. The gas-phase reactions decrease the concentrations of peroxo species and improve selectivity slightly. The effects of reaction conditions and catalyst site density provide further insights into how factors beyond conversions at lattice oxygens influence rates and selectivity in alkane oxidation reactions of significant industrial importance.

42 ENGINEERING↗