Search NASA⌕ Search

SEARCH · Search NASA

Results for “CE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Structural and electrical properties of Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} thick film electrolyte

Graphical abstract: - Highlights: • Effects of Sr doping on electrical properties and structure were investigated. • The samples have higher conductivity and low activation energy. • Cause of increase oxygen vacancy concentration in the grain boundary. - Abstract: The effects of Sr doping on the electrical properties of Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} (x = 0, 0.01, 0.02, 0.03, 0.04, 0.05 mol%) electrolytes thick films were investigated. The samples sintered at 1400 °C for 8 h. X-ray diffraction (XRD) showed typical XRD patterns of a cubic fluorite structure, and the ionic conductivity was examined by AC impedance spectroscopy. From the experimental results, it was observed that Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} (x = 0.04 mol%) electrolytes thick film have higher conductivity and minimum activation energy at 600 °C. This is explained in terms of the increased in the oxygen vacancy concentration at the grain boundary.

36 MATERIALS SCIENCE↗

Structural, magnetic and optical properties of a dilute magnetic semiconductor based on Ce{sub 1−x}Co{sub x}O{sub 2} thin film grown on LaAlO{sub 3}

Highlights: • Co doped CeO{sub 2} was grown on LaAlO{sub 3} (0 0 1) via a modified sol–gel spin-coating technique. • The concentration of the Co ions was varied from 1 to 15 at.%. • The incorporation of 5 at.% of Mn ions was found to provide formation of exceptionally magnetic moment. • This amount demonstrated a giant magnetic moment of 1.09 μ{sub B}/Co. • This amount reduced the optical band gap and enhanced the optical performance. - Abstract: The enhancement of the room temperature ferromagnetism and optical properties of the dilute magnetic metal oxides is a crucial clue to construct spin-based optoelectronic devices. In this work, Ce{sub 1−x}Co{sub x}O{sub 2} (0.01 ≤ x ≤0.15) thin films were prepared via ethylene glycol modified sol–gel spin coating technique on the LaAlO{sub 3} (0 0 1) substrate to enhance their room temperature ferromagnetism and optical properties. The structures, magnetic and optical properties of the prepared films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, SQUID magnetometer, X-ray photoelectron spectroscopy and UV–vis spectrophotometer. The results demonstrated that a single phase cubic structure was formed, implying the substitution of Co ions into the Ce ions sites. The prepared films showed room temperature ferromagnetism with saturation magnetic moment of 1.09 μ{sub B}/Co was achieved for 5 at.% Co-doped CeO{sub 2}. This film exhibited high optical transparency of 85% and low optical band energy gap of 3.39 eV. The improved magnetic and optical properties are argued to the increase of the density of the oxygen vacancies into the cerium oxide crystal structure due to the incorporation of Co ions.

36 MATERIALS SCIENCE↗

Effect of mixing Ce{sup 3+} and Nd{sup 3+} ions in equimolar ratio on structural, optical and dielectric properties on pure cerium orthovanadate and neodymium orthovanadate

Highlights: • CeV, NdV and mixed CeNdV nanoparticle prepared by chemical co precipitation method. • With mixing of Ce{sup 3+} and Nd{sup 3+} morphology is totally changed in mixed CeNdV. • Optical band energy of CeV, NdV and CeNdV shows good photocatalyst under UV light. • Conduction mechanism in CeV due to large polaron and small polaron in CeNdV. - Abstract: Cerium orthovanadate, neodymium orthovanadate and mixed cerium neodymium orthovanadate nanoparticles was prepared by co-precipitation method. Powder X-ray diffraction reveals tetragonal zircon structure. Slight increase in lattice parameter, volume and decrease in X-ray density inferred that Ce{sup 3+} and Nd{sup 3+} ion replaces each other. Transmission electron microscopy suggests change in morphology with the effect of mixing and validates formation of nanocrystalline material. The infrared transmittance spectrum confirmed the presence of various functional groups. Dielectric properties as function of frequency show dielectric constant and loss tangent decreases with increase in frequency which is due to Maxwell–Wagner type interfacial polarization. The variation of AC conductivity measurement with frequency suggests conduction mechanism due to large polaron hopping in CeV whereas small polaron in mixed CeNdV. The activation energy decreases with rising frequency indicates the conduction mechanism is based on polaron hopping between localized states in disordered manner.

36 MATERIALS SCIENCE↗

Sub-nanosecond Half-life Measurement of the Yrast I{sup π}=5{sup −} State in the N=78 Nucleus {sup 136}{sub 58}Ce using Fast-timing Coincident Gamma-ray Spectroscopy

We report on the measurement of the half-life of the yrast I{sup π}=5{sup −} state in the transitional nucleus {sup 136}Ce using a combined HPGe-LaBr3(Ce) scintillator gamma-ray detection array. The measured value for the E1 decay is approximately half a nanosecond, which corresponds to an E1 decay strength of approximately 2×10{sup −6} Wu. This value is in line with single-particle type E1 decays in this mass region and suggests no sign of additional K-hindrance associated with axially symmetric quadrupole deformations observed for lighter cerium isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gamma-ray coincidence and fast-timing measurements using LaBr{sub 3}(Ce) detectors and gammasphere

The performance of new scintillator detectors based on LaBr{sub 3}(Ce) technology was evaluated in conjunction with the Gammasphere spectrometer. Specifically, the lifetimes of states between 50 ps and 1 ns, populated in the decay of the {sup 177m}Lu isomeric state (T{sub 1/2} = 160 d), have been measured. Even though the decay scheme is rather complex, it is possible to perform precise measurements because of the superior energy resolution of the LaBr{sub 3}(Ce) detectors, compared to that of BaF{sub 2} scintillators, when used in combination with the power of the Gammasphere array to isolate a specific {gamma} cascade

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multi-Quasiparticle Gamma-Band Structure in Neutron-Deficient Ce and Nd Isotopes

The newly developed multi-quasiparticle triaxial projected shell-model approach is employed to study the high-spin band structures in neutron-deficient even-even Ce and Nd isotopes. It is observed that gamma bands are built on each intrinsic configuration of the triaxial mean-field deformation. Due to the fact that a triaxial configuration is a superposition of several K states, the projection from these states results in several low-lying bands originating from the same intrinsic configuration. This generalizes the well-known concept of the surface gamma oscillation in deformed nuclei based on the ground state to gamma bands built on multi-quasiparticle configurations. This new feature provides an alternative explanation on the observation of two I=10 aligning states in ^{134}Ce and both exhibiting a neutron character.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coexistence of octupole deformation and beta and gamma vibrational bands in 148 Ce

From γ-γ-γ and γ-γ-γ-γ coincidence studies of spontaneous fission of 252 Cf, new high spin states in 148 Ce were identified. The octupole bands with s = +1 and s = -1 are expanded with spins with 28 + and 18 - , respectively. Importantly, a 1γ vibrational band has been established up to 14 + and a 1β vibrational band up to 6 + . The levels in γ and β bands in 148 Ce are compared systematically to those in neighboring 150 Nd and 152 Sm isotones. Further, this comparison informs the role of deformation and shape transition in this mass region. New 3 - and 5 - members of the s = +1 octupole band were observed.

148Ce↗

Thermal Variation of Ce Valence in Mixed Valence–Kondo Lattice Systems CeT2(Si1-xGex)2 with T= Mn and Ni

The results on the thermal variation of Ce L3-valence in CeT2(Si1-xGex)2 series with 0{le}x{le}1 and T=Mn and Ni are reported. It is observed that for both series, the Ce valence increases with decreasing temperature and has little thermal variation for samples in the nearly trivalent regime. The magnitude of this thermal variation in the T=Mn series is much greater than in the T=Ni series. The results are explained by the degenerate Anderson model and correlated with the specific heat data.

36 MATERIALS SCIENCE↗

Unexpected Hydride: Ce 4 B 2 C 2 H 2.42 , a Stuffed Variant of the Nd 2 BC Structure Type

Ce 4 B 2 C 2 H 2.42 was grown as large crystals from a cerium/copper eutectic flux. The structure was characterized by single-crystal X-ray and neutron diffraction and was found to be a stuffed variant of Nd 2 BC with the addition of two interstitial hydrogen positions. The tetrahedral hydrogen position is fully occupied, while the octahedral position has an occupancy of 42(3)%. Initial synthesis was due to hydrogen contamination of the cerium metal but has been successfully repeated using anthracene as a carbon and hydrogen source. Density of states calculations suggest that the incorporation of hydrogen stabilizes the compound with respect to the nonhydrided model. Magnetic susceptibility data show a complex magnetic ordering at 7.7 K that originates from the localized electron on the Ce 3+ in the structure. The trivalent state is also supported by X-ray photoelectron spectroscopy measurements. Heat capacity and electrical resistivity data show that the phase transition is broad in temperature, which may be due to structural disorder. Furthermore, the large low temperature value of C/T also indicates possible heavy fermion behavior.

36 MATERIALS SCIENCE↗

Kinetics and Mechanism of Ce(IV) Phase Transfer by the Neutral Extractants Tributyl Phosphate and N,N -Di(2-ethylhexyl)isobutyramide

Tributyl phosphate and N,N-di(2-ethylhexyl)isobutyramide (DEHiBA) are uranium-selective extractants that could be used to recover low-enriched uranium from commercial used nuclear fuel. The economic viability of liquid-liquid extraction processes for chemical separations depends on both thermodynamic and kinetic considerations. Here we used microfluidic droplet extraction to measure interfacial phase transfer rate constants for the extraction and stripping of Ce(IV), a non-radioactive actinide surrogate. The Damkohler numbers for each system were calculated and the phase transfer processes were determined to be diffusion-limited under all conditions, contrary to prior studies using constant interface stirred cells and single drop methods. A well-extracted 2:1 DEHiBA/Ce(IV) complex in the organic phase was determined from batch distribution studies, suggesting a different extraction mechanism for Ce(IV) compared with poorly extracted Pu(IV). Finally, phase disengagement rates were found to be rapid in both systems, in agreement with other studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dinuclear Ce(IV) Aryloxides: Highly Active Catalysts for Anhydride/Epoxide Ring-Opening Copolymerization

Here, a library of new dinuclear CeIV complexes of the type [NEt 4 ] 2 [Ce 2 X 6 (TP)(sol) 2 ] (X = Cl, ODipp, OSiMe 3 ; sol = py, THF), where TP represents a family of tetraphenolate ligands that control intermetallic distance, are readily made in good yields. The ligands strongly stabilize the cerium +4 oxidation state and allow the incorporation of alkylammonium cocations in an "ate"complex formulation that enables them to be used as soluble, single-component catalysts for the ring-opening copolymerization (ROCOP) of a variety of anhydrides and epoxides. High turnover frequencies (TOFs) are achieved with high ester linkage selectivity, low dispersities, and rates that are highly tunable by the intermetallic distance enforced by the TP ligand, demonstrating that a closely coupled di-Ce IV unit provides excellent rates of ROCOP catalysis and that, more generally, rare-earth complexes deserve further attention as ROCOP initiators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗

Electro-chemo-mechanically Driven Ni Exsolution from (Pr,Ce,Ni)O 2−δ : Controlled Nucleation Density and Enhanced Electrode Kinetics

In situ exsolution of metal nanoparticles is a promising strategy to prepare electrocatalysts with enhanced activity and resistance to agglomeration for efficient chemical transformations and energy conversion. Achieving a high nucleation density of nanoparticles under mild conditions and understanding how to tailor the process is important for performance of these electrodes in electrochemical cells. In this work, we demonstrate facile exsolution of Ni nanoparticles using fluorite-structured (Pr,Ce)O 2−δ as the support oxide, driven by electrochemical potential and aided by the metastability of Ni in the solid solution (elastic driving force). We prepare single-phase oriented thin films of (Pr,Ce,Ni)O 2−δ (NPCO) on (Zr,Y)O 2−δ (YSZ) substrates by pulsed laser deposition. With the aid of a high-throughput electrochemical cell that provides a lateral gradient in Nernst voltage, we apply in situ near-ambient pressure synchrotron X-ray photoelectron spectroscopy and ex situ atomic force microscopy to investigate the impact of electrochemical potential on Ni nucleation density. We find that metallic Ni can be successfully exsolved at 550 °C upon cathodic biasing in 20 mTorr O 2 , and its nucleation density increases with increasing electrochemical driving force/decreasing oxygen chemical potential. We further evaluate the electrochemical performance under highly reducing (fuel electrode) conditions by electrochemical impedance spectroscopy. With the exsolved Ni nanoparticles, the surface exchange coefficient of the NPCO is found to be ∼4× higher than for PCO without exsolution. This work confirms mixed conducting fluorites as beneficial host lattices for facile transition-metal exsolution and suggests the possibility for constructing an all ceria-based electrochemical cell with PCO serving as both the cathode and the anode.

36 MATERIALS SCIENCE↗

Rapid Microwave Preparation of Highly Efficient Ce[superscript 3+]-Substituted Garnet Phosphors for Solid State White Lighting

Ce{sup 3+}-substituted aluminum garnet compounds of yttrium (Y{sub 3}Al{sub 5}O{sub 12}) and lutetium (Lu{sub 3}Al{sub 5}O{sub 12}) - both important compounds in the generation of (In,Ga)N-based solid state white lighting - have been prepared using a simple microwave heating technique involving the use of a microwave susceptor to provide the initial heat source. Carbon used as the susceptor additionally creates a reducing atmosphere around the sample that helps stabilize the desired luminescent compound. High quality, phase-pure materials are prepared within a fraction of the time and using a fraction of the energy required in a conventional ceramic preparation; the microwave technique allows for a reduction of about 95% in preparation time, making it possible to obtain phase pure, Ce{sup 3+}-substituted garnet compounds in under 20 min of reaction time. It is estimated that the overall reduction in energy compared with ceramic routes as practiced in the lab is close to 99%. Conventionally prepared material is compared with material prepared using microwave heating in terms of structure, morphology, and optical properties, including quantum yield and thermal quenching of luminescence. Finally, the microwave-prepared compounds have been incorporated into light-emitting diode 'caps' to test their performance characteristics in a real device, in terms of their photon efficiency and color coordinates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crystal Growth, Structure, and Physical Properties of LnCu[subscript 2](Al,Si)[subscript 5] (Ln = La and Ce)

LnCu{sub 2}(Al,Si){sub 5} (Ln = La and Ce) were synthesized and characterized. These compounds adopt the SrAu{sub 2}Ga{sub 5} structure type and crystallize in the tetragonal space group P4/mmm with unit cell dimensions of a {approx} 4.2 {angstrom} and c {approx} 7.9 {angstrom}. Herein, we report the structure as obtained from single crystal X-ray diffraction. Additionally, we report the magnetic susceptibility, magnetization, resistivity, and specific heat capacity data obtained for polycrystalline samples of LnCu{sub 2}(Al,Si){sub 5} (Ln = La and Ce).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LnV 3 Te 3 O 15 (OH) 3 · n H 2 O (Ln = Ce, Pr, Nd, Sm, Eu, Gd; n = 1–2): A New Series of Semiconductors with Mixed-Valent Tellurium (IV,VI) Oxoanions

Six new lanthanide tellurium vanadates with the general formula LnV 3 Te 3 O 15 (OH) 3 ·nH 2 O(LnVTeO) (Ln =Ce, Pr, Nd, Sm, Eu, and Gd; n= 2 for Ce and Pr; n= 1 for Nd, Sm, Eu, and Gd) have been prepared hydrothermally via the reactions of lanthanide nitrates, TeO 2 , and V 2 O 5 at 230 °C. LnVTeO adopts a three-dimensional (3D) channel structure with a space group of P6 3 /mmc. Surprisingly, two types of oxoanions: Te IV O 3 2- trigonal pyramids and Te VI O 6 6- octahedra, coexist in these compounds. Solid-state UV-vis-NIRabsorption spectra for LnVTeO show approximate band gaps on the order of 1.9 eV, suggesting the wide band gap semiconducting nature of these materials. Finally, no magnetic phase transition was observed in any of the analogues, but a clear increase in the strength of short-range antiferromagnetic correlations was found with the shortening of distances between magnetically coupled Ln 3+ ions in LnVTeO.

anions↗

Robust upward dispersion of the neutron spin resonance in the heavy fermion superconductor Ce 1−x Yb x CoIn 5

The neutron spin resonance is a collective magnetic excitation that appears in the unconventional copper oxide, iron pnictide and heavy fermion superconductors. Although the resonance is commonly associated with a spin-exciton due to the d(s ± )-wave symmetry of the superconducting order parameter, it has also been proposed to be a magnon-like excitation appearing in the superconducting state. Here we use inelastic neutron scattering to demonstrate that the resonance in the heavy fermion superconductor Ce 1−x Yb x CoIn 5 with x=0, 0.05 and 0.3 has a ring-like upward dispersion that is robust against Yb-doping. By comparing our experimental data with a random phase approximation calculation using the electronic structure and the momentum dependence of the d x 2 -y 2 -wave superconducting gap determined from scanning tunnelling microscopy (STM) for CeCoIn 5 , we conclude that the robust upward-dispersing resonance mode in Ce 1−x Yb x CoIn 5 is inconsistent with the downward dispersion predicted within the spin-exciton scenario.

43 PARTICLE ACCELERATORS↗

Microstructure and properties of additively manufactured Al–Ce–Mg alloys

Additive manufacturing of aluminum alloys is largely dominated by a near-eutectic Al-Si compositions, which are highly weldable, but have mechanical properties that are not competitive with conventional wrought Al alloys. In addition, there is a need for new Al alloys with improved high temperature properties and thermal stability for applications in the automotive and aerospace fields. In this work, we considered laser powder bed fusion additive manufacturing of two alloys in the Al–Ce–Mg system, designed as near-eutectic (Al–11Ce–7Mg) and hyper-eutectic (Al–15Ce–9Mg) compositions with respect to the binary L → Al + Al 11 Ce eutectic reaction. The addition of magnesium is used to promote solid solution strengthening. A custom laser scan pattern was used to reduce the formation of keyhole porosity, which was caused by excessive vaporization due to the high vapor pressure of magnesium. The microstructure and tensile mechanical properties of the alloys were characterized in the as-fabricated condition and following hot isostatic pressing. The two alloys exhibit significant variations in solidification structure morphology. These variations in non-equilibrium solidification structure were rationalized using a combination of thermodynamic and thermal modeling. Both alloys showed higher yield strength than AM Al-10Si-Mg for temperatures up to 350 °C and better strength retention at elevated temperatures than additively manufactured Scalmaloy.

36 MATERIALS SCIENCE↗