Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coating processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Crude-Oil-Repellent Membranes by Atomic Layer Deposition: Oxide Interface Engineering

Crude oil fouling on membrane surfaces is a persistent, crippling challenge in oil spill remediation and oilfield wastewater treatment. In this research, we present how a nanosized oxide coating can profoundly affect the anti crude-oil property of membrane materials. Select oxide coatings with a thickness of similar to 10 nm are deposited conformally on common polymer membrane surfaces by atomic layer deposition to significantly mitigate fouling during filtration processes. TiO 2 - and SnO 2 -coated membranes exhibited far greater anti-crude-oil performance than ZnO- and Al 2 O 3 -coated ones. Tightly bound hydration layers play a crucial role in protecting the surface from crude oil adhesion, as revealed by molecular dynamics simulations. Furthermore, this work provides a facile strategy to fabricate crude oil-resistant membranes with negligible impact on membrane structure, and also demonstrates that, contrary to common belief, excellent crude oil resistance can be achieved easily without implementation of sophisticated, hierarchical structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-Like Emission From Highly Scattering ZnO Nanoparticle Films

A convenient and straightforward way to fabricate random lasing films based on ZnO is proposed. Highly scattering films consisting of ZnO nanoparticles are fabricated following a two-stage process that involves a) spin-coating of aqueous ZnO nanoparticle dispersions on rigid (glass) or flexible (polyethylene terephthalate) substrates and b) subsequent surface modification by means of a controlled UV laser annealing processing. Upon excitation with 150 picosecond pulses at 355 nm, the films exhibit intense photoluminescence emission, which upon crossing a threshold pump energy density, develops laser-like characteristics, namely, gain amplification, spectral narrowing and, under optimum pump conditions and sample structure, distinct lasing modes.

36 MATERIALS SCIENCE↗

Polymer precursors for coatings, binder and adhesive applications for solid state electrolytes

We report here efforts to develop polymer precursor electrolytes that offer properties anticipated to be similar or superior to LiPON glasses. Such precursors offer the potential to be used to process LiPON-like thin glass/ceramic coatings for use in ASBs. Here, LiPON glasses provide a design basis for the synthesis of a set of oligomers/polymers by lithiation of OP(NH 2 ) 3-x (NH) x [from OP(NH) 3 ], OP(NH 2 ) 3-x (NHSiMe 3 ) x and [P=N] 3 (NHSiMe 3 ) 6-x (NH) x . The resulting systems have degrees of polymerization ranging from 5-20. Treatment with selected amounts of LiNH 2 provides varying degrees of lithiation and Li + conducting properties commensurate with Li + content. The polymer electrolytes + celgard exhibit Li + conductivities as high as ~1 × 10 -5 S/cm at room temperature. The polymer electrolytes are also thermally stable up to ≈150 °C. A Li-S battery was assembled using a Li 6 SiPON composition polymer electrolyte. This battery exhibits an initial reversible capacity of 1500 mAh/g sulfur and excellent cycle performance at 0.25 and 0.5 C rate over 120 cycles, declining to 750 mAh/g at the end of the 220 h test period.

Temeche, Eleni↗

Corrosion Performance of Composite MAO/TiO{sub 2} Sol–Gel Coatings on Magnesium Alloy AZ91D

In this paper, the composite coatings on the surface of magnesium alloy were successfully prepared by the combination of micro-arc oxidation (MAO) and sol–gel method. Oxide ceramic layers were formed on AZ91D magnesium alloy using MAO process. The sol–gel layers were coated on MAO ceramic layers. The composition of the composite coatings was analyzed by x-ray diffraction and x-ray photoelectron spectroscopy. The microstructure of the composite coatings was analyzed by scanning electron microscope. The results show that the composite coatings can reduce the gap membrane effectively. The polarization curves and electrochemical impedance spectroscopy were used to evaluate the corrosion resistance. The results of corrosion tests show that the sol–gel layer enhances the corrosion resistance of the magnesium alloys significantly.

36 MATERIALS SCIENCE↗

Atomic Layer Deposition for SRF Cavities

We have begun using Atomic Layer Deposition (ALD) to synthesize a variety of surface coatings on coupons and cavities as part of an effort to produce rf structures with significantly better performance and yield than those obtained from bulk niobium, The ALD process offers the possibility of conformally coating complex cavity shapes with precise layered structures with tightly constrained morphology and chemical properties. Our program looks both at the metallurgy and superconducting properties of these coatings, and also their performance in working structures. Initial results include: (1) results from ALD coated cavities and coupons, (2) new evidence from point contact tunneling (PCT) showing magnetic oxides can be a significant limitation to high gradient operation, (3) a study of high pressure rinsing damage on niobium samples.

43 PARTICLE ACCELERATORS↗

Hydrothermal synthesis of Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} nanotubes for enhanced photoluminescence properties

Highlights: • Eu{sup 3+} doped Y{sub 2}O{sub 3} nanotubes. • Hydrothermal synthesis of Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} nanostructures assissted with a further heat treatment. • Tunable coating ratios of Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} nanophosphor. • Enhanced photoluminescence intensity of Y{sub 2}O{sub 3}:Eu{sup 3+} more than 60% by Y{sub 2}O{sub 3} surface coating. - Abstract: Novel Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} nanotubes with different coating ratios were synthesized successfully by a facile two-step process, including hydrothermal synthesis of Y(OH){sub 3} coated Y(OH){sub 3}:Eu{sup 3+} as precursors and then calcination of them at 1000 °C for 2 h. X-ray diffraction patterns and field emission scanning electron microscope images indicated these Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} phosphors possess tubular nanostructures. The photoluminescence properties of Y{sub 2}O{sub 3} coated Y{sub 2}O{sub 3}:Eu{sup 3+} were systematically investigated by photoluminescence spectra, and photoluminescence enhancement was observed after proper coating. In other words, the coating ratio played a crucial role in photoluminescence efficiency. When it was 1/9, the photoluminescence intensity of {sup 5}D{sub 0} → {sup 7}F{sub 2} emission (about 613 nm) was 60% higher than that of Y{sub 2}O{sub 3}: Eu{sup 3+} phosphors under 255 nm excitation. Therefore, surface coating may be an alternative route for enhanced photoluminescence properties of the Y{sub 2}O{sub 3}:Eu{sup 3+} red-emitting phosphor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydriding, Oxidation, and Ductility Evaluation of Cr-Coated Zircaloy-4 Tubing

Accident-tolerant fuel concepts have been developed recently in diverse research programs. Recent research has shown clear advantages of Cr-coated Zr cladding over bare cladding tubes regarding oxidation behavior under the design basis loss-of-coolant accident condition. However, limited data are available about the hydriding behavior of the Cr coating. For that purpose, Cr-coated Zricaloy-4 tubes were tested to investigate the effects of hydriding, oxidation, and postquench ductility behavior on coated Zr cladding. A high-power impulse magnetron sputtering (HiPIMS) process was used to produce a high-density coating on the Zircaloy-4 tube surface. Coated and uncoated Zircaloy-4 tube specimens underwent one-sided hydriding in a tube furnace filled with pure hydrogen gas at 425 °C. The tubing specimen ends were sealed with Swagelok plugs before the hydriding runs. For uncoated specimens, H analysis of the hydrided specimens indicated that the H content increased as the test time and initial pressure increased. However, almost no change was observed for the coated specimens that were hydrided under the same test conditions. After one-sided hydriding, the hydrided coated and uncoated specimens were exposed to steam at high temperatures for two-sided oxidation studies to simulate accident conditions. The coated specimens showed a slower oxidation: oxygen pickup was 50% lower than the uncoated specimens tested under the same conditions. Ring compression testing was performed to evaluate the embrittlement behavior of the Cr-coated specimens after hydriding and oxidation. The results indicated that the HiPIMS coating provides excellent protection from hydriding and oxidation at high temperatures.

36 MATERIALS SCIENCE↗

Corrosion resistant coatings for zirconium-alloy cladding with improved accident tolerance

The Westinghouse-led accident tolerant fuel (ATF) program is evaluating Accident Tolerant Fuel (ATF) coatings of MAX phase (Ti{sub 2}AlC) and multi-layer Ti{sub x}Al{sub 1-x}N/TiN to enhance the oxidation resistance of zirconium alloy fuel cladding in both normal operation and beyond design-based conditions of light water reactors. A variety of coating technologies have been applied to deposit these coating materials onto Zircaloy-4 or Zirlo sheets and tubes, including cold spray and cathodic arc-physical vapor deposition (CA-PVD). Neutronic analysis using the elemental compositions of the coating materials showed that the coating thicknesses should be less than 30 μm for most coating materials to avoid non-negligible economic penalty. The coated samples were autoclave tested in water at 360 Celsius degrees and 150 bar or in steam at 427 Celsius and 103 bar for corrosion resistance evaluation. The initial Ti{sub 2}AlC coating made by using large particle size MAX phase powder and cold spray deposition did not provide the desired corrosion resistance due to un-optimized microstructure and porosity. Subsequent optimization including reduction in particle size and tuning of cold spray deposition parameters resulted in denser coatings less than 30 microns in thickness. Optimization of process conditions resulted in reduced oxidation kinetics and showed that the coating acts as an effective barrier to prevent the zirconium substrate from oxidizing in accident condition temperatures. High purity Ti{sub 2}AlC powder is needed to further improve oxidation resistance of the Ti{sub 2}AlC coating. The oxidation resistance of pure monolithic MAX phase compound was also found to be remarkable, and the weight gain was only 1.85 mg/cm{sup 2} for 96 hours exposure in 1200 C. degrees steam, which is consistent with the literature. The corrosion resistance of the TiAlN/TiN multilayer coating was excellent. The weight gain was negligible and no oxidation was observed on the surface of zirconium-alloy at the coating-substrate interface. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Si 3 N 4 @RGO Hybrids for Epoxy Coatings With Enhanced Anticorrosion Performance

The reduced graphene oxide (RGO)‐encapsulated functionalized silicon nitride hybrids (f‐Si 3 N 4 @RGO) were fabricated from sodium borohydride reduction of electrostatically assembled f‐Si 3 N 4 @GO hybrids with the help of silane coupling agent. The waterborne epoxy coating with 2 wt% f‐Si 3 N 4 @RGO was prepared by a room temperature curing process. The corrosion resistance properties of the coating were investigated. In the f‐Si 3 N 4 @RGO/epoxy coating, the unique structure of f‐Si 3 N 4 particles firmly embedded in the RGO sheets could effectively prevent the agglomeration of graphene in the epoxy and construct shielding barrier at the coating‐tinplate interface. The results showed that the anticorrosive performance of the coating was significantly enhanced by incorporation of f‐Si 3 N 4 @RGO hybrids to epoxy. This superior f‐Si 3 N 4 @RGO structure with its prominent dispersion could make full use of the enhancement effect of the different components and thus endowed the waterborne epoxy coating with good shielding properties. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers

Ge, Heyi↗

Crack mitigation and wear performance of high-strength steel coatings deposited by high-speed laser cladding

This article investigates the fabrication of defect-free Rockit® 606, a high‑carbon, vanadium- and chromium-enriched precipitation-hardening martensitic steel coating, using high-speed laser cladding (HSLC). Compared to conventional laser cladding, HSLC offers higher deposition efficiency, improved coating quality, minimal thermal distortion, and a reduced heat-affected zone. Various HSLC parameters—including laser power, travel speed, powder feed rate, and overlap distance—were optimized to achieve superior coating properties. Microstructural analysis revealed solidification cracks in coatings deposited on carburized steel, regardless of processing parameters. However, preheating the substrate to 250 °C effectively eliminated cracking by reducing thermal gradients. The coatings exhibited a columnar dendritic microstructure, with coarser dendrites near the substrate and finer dendrites towards the surface. Hardness measurements confirmed that all coatings significantly exceeded the industry-specified threshold of 60 HRC, with preheating having minimal effect on overall hardness distribution. Reciprocating sliding wear tests demonstrated a substantial improvement in wear resistance for the defect-free HSLC coatings compared to baseline carburized steel. These findings underscore the potential of HSLC for producing high-performance, wear-resistant coatings suitable for industrial applications.

36 MATERIALS SCIENCE↗

Area 2. Use Of Engineered Nanoparticle-Stabilized CO 2 Foams To Improve Volumetric Sweep Of CO 2 EOR Processes

The goal of this project was to develop a new CO 2 injection enhanced oil recovery (CO 2 -EOR) process using engineered nanoparticles with optimized surface coatings that has better volumetric sweep efficiency and a wider application range than conventional CO 2 -EOR processes. The main objectives of this project were to (1) identify the characteristics of the optimal nanoparticles that generate extremely stable CO 2 foams in situ in reservoir regions without oil; (2) develop a novel method of mobility control using “self-guiding” foams with smart nanoparticles; and (3) extend the applicability of the new method to reservoirs having a wide range of salinity, temperatures, and heterogeneity. Concurrent with our experimental effort to understand the foam generation and transport processes and foam-induced mobility reduction, we also developed mathematical models to explain the underlying processes and mechanisms that govern the fate of nanoparticle-stabilized CO 2 foams in porous media and applied these models to (1) simulate the results of foam generation and transport experiments conducted in beadpack and sandstone core systems, (2) analyze CO 2 injection data received from a field operator, and (3) aid with the design of a foam injection pilot test. Our simulator is applicable to near-injection well field-scale foam injection problems and accounts for the effects due to layered heterogeneity in permeability field, foam stabilizing agents effects, oil presence, and shear-thinning on the generation and transport of nanoparticle-stabilized C/W foams. This report presents the details of our experimental and numerical modeling work and outlines the highlights of our findings.

54 ENVIRONMENTAL SCIENCES↗

Biofabrication methods for the patterned assembly and synthesis of viral nanotemplates

This paper reports on novel methodologies for the patterning and templated synthesis of virus-structured nanomaterials in two- and three-dimensional microfabricated architectures using the Tobacco mosaic virus (TMV). The TMV is a high aspect ratio biological molecule which can be engineered to include amino acids with enhanced binding properties. These modifications facilitate self-assembly of the TMV onto various substrates and enable its use as a template for the synthesis of nanostructured materials. This work focuses on the combination of this bottom-up biologically inspired fabrication method with standard top-down micromachining processes that allow direct integration of the virus-structured materials into batch-fabricated devices. Photolithographic patterning of uncoated as well as nickel-coated TMV nanostructures has been achieved using a lift-off process in both solvent and mild basic solutions and their assembly onto three-dimensional polymer and silicon microstructures is demonstrated. In addition to these patterning techniques, in situ formation of metal oxide TMV coatings in patterned microfabricated environments is shown using atomic layer deposition directly on the nickel-coated viruses. The biofabrication 'process toolbox' presented in this work offers a simple and versatile alternative for the hierarchical patterning and incorporation of biotemplated nanomaterials into micro/nanofabrication schemes.

36 MATERIALS SCIENCE↗

A facile method to synthesize carbon coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} with improved performance

Graphical abstract: Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders are synthesized and then coated by decomposed carbon. The discharge capacity of carbon-coated cathode at 0.1 and 5 C are 246 and 125 mAhg{sup −1}, while those of ball-milled cathode are 222 and 49 mAhg{sup −1}. - Highlights: • A simple method was applied to synthesize carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2}. • The discharge capacities of carbon-coated sample at 0.1 and 5.0 C rates are 246 and 125 mAh/g. • Capacity retention of carbon-coated electrode after 50 cycles is 97.5%. - Abstract: Carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders have been synthesized with Bakelite and heat process in air. The effect of carbon coating on the physical and electrochemical properties have been discussed through the characterizations of X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), discharge and rate tests. The carbon-coated cathode exhibits much improved first discharge capacity and rate capability than the pristine sample. The discharge capacity at 0.1 and 5.0 C rates are 246 and 125 mAhg{sup −1}, while that of pristine are only about 222 and 49 mAhg{sup −1}, respectively. The capacity retention of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode after 50 cycles is improved from 89.8 to 97.5% after carbon coating. EIS results indicate that R{sub ct} of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode is decreased from 62 to 37 Ω after carbon coating.

36 MATERIALS SCIENCE↗

Silica coated magnetic nanoparticles for separation of nuclear acidic waste

Fe{sub 2}O{sub 3} magnetic nanoparticles (MNPs) have been coated with silica, followed by covalent attachment of the actinide specific chelators to separate nuclear waste in acidic conditions. A general model is developed to relate the surface coating to the particle's magnetization change, providing an alternative way to characterize the size-distribution/aggregation of MNPs. The optimized silica coating protects the Fe{sub 2}O{sub 3} MNPs from iron leaching under highly acidic conditions, facilitates the dispersion of MNPs, and dramatically increases the loading capacity of chelator onto the MNPs. Compared with the uncoated counterparts, the silica coated MNPs show enhanced actinide separation efficiency.

36 MATERIALS SCIENCE↗

Anode-supported tubular SOFCs based on BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ electrolyte fabricated by dip coating

Anode-supported tubular solid oxide fuel cells (SOFCs) based on a proton and oxide ion mixed conductor, BaZr0.1Ce0.7Y0.1Yb0.1O3 - δ (BZCYYb), have been fabricated using a dip coating and co-firing process. This new fabrication technique effectively reduced the Ohmic resistances of tubular cells to ~ 0.1 and ~ 0.3 Ω cm2 at 750 and 600 °C, respectively. Typical tubular cells with Ni-BZCYYb anode, BZCYYb electrolyte, and La0.6Sr0.4Co0.2Fe0.8O3 - δ (LSCF)-BZCYYb composite cathode demonstrated much-improved performance, achieving peak power densities of 1.13, 0.81, 0.63, and 0.53 W cm- 2 at 750, 700, 650, and 600 °C, respectively, when humidified (3 v% water vapor) hydrogen was used as fuel and ambient air as oxidant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single particle impact explorations on the role of powder heat treatments in cold spray: Effects of strength and oxide structure

In cold spray, the optimization of the powder feedstock for improving the final properties of the coating and for improving the process itself are two different objectives. This paper explores the latter, studying the relationship between powder pre-heat treatment and the kinetic bonding between the individual particles and the substrate. Using a laser-induced particle impact test (LIPIT), we investigate the effect of different heat treatments on the critical adhesion velocity of Al 6061. Although heat treatments change the strength of the powders as well as the thickness of the native oxide layer each by as much as ∼50 %, the critical adhesion velocity remains constant to within only ∼10 %. A deeper analysis reveals that these two factors change in somewhat complementary ways for the heat treatments explored here, leading to counteracting effects. By quantitatively evaluating these two microstructural factors in tandem, we find that they are roughly equally important in determining the critical adhesion velocity. These observations thus provide insight for the development of new heat treatment regimens that might lower the adhesion velocity.

Al 6061↗

Extreme fast charging characteristics of zirconia modified LiNi 0.5 Mn 1.5 O 4 cathode for lithium ion batteries

LiNi 0.5 Mn 1.5 O 4 is a promising high-voltage cathode for lithium-ion battery fast charging applications. Aware of its electrochemical stability issues, the material's surface is modified with small amounts of zirconia (ZrO 2 ) ranging from 0.5 to 2 wt% using a scalable ball milling process. The advantage of the coating has been demonstrated in electrochemical measurements performed at room temperature and 55 °C, and in cells discharged under high-rate conditions up to 80C. Of significance, the material coated with 1.0 wt% ZrO 2 has been cycled at the 40C rate for over a thousand cycles and retains 86% of its initial capacity. The material with 2.0 wt% ZrO 2 modification preserves 76% of its initial capacity when cycled at the 40C rate and 55 °C. The coated materials have shown excellent cycling stability when subjected to 6C (10-min) fast charging and C/3 discharging for 300 cycles. Compared to the uncoated material, the interfacial resistance of the zirconia modified LiNi 0.5 Mn 1.5 O 4 has been found to be much lower and does not significantly increase with increasing the coating amount. However, the electrochemical performances are still partly limited by both interfacial resistance at the beginning of charge and electrolyte diffusivity, particularly under higher rate cycling conditions. Altogether, the strategy of ZrO 2 surface modification applied to LiNi 0.5 Mn 1.5 O 4 unveils the potential that the material could play in extreme fast charged electric vehicles.

25 ENERGY STORAGE↗

Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating

Here, Lithium-sulfur (Li-S) battery is a promising high energy storage candidate in electric vehicles. However, the commonly employed ether based electrolyte does not enable to realize safe high-temperature Li-S batteries due to the low boiling and flash temperatures. Traditional carbonate based electrolyte obtains safe physical properties at high temperature but does not complete reversible electrochemical reaction for most Li-S batteries. Here we realize safe high temperature Li-S batteries on universal carbon-sulfur electrodes by molecular layer deposited (MLD) alucone coating. Sulfur cathodes with MLD coating complete the reversible electrochemical process in carbonate electrolyte and exhibit a safe and ultrastable cycle life at high temperature, which promise practicable Li-S batteries for electric vehicles and other large-scale energy storage systems.

25 ENERGY STORAGE↗