Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The association between vaginal microbiota disorders and early missed abortion: A prospective study

Abstract Introduction The objective of this study was to explore the association between disordered vaginal microbiota and missed abortion to ascertain potential causes of missed abortion related to vaginal microbiology. Material and methods This study was a prospective cohort study with a comparison group (reference group). Vaginal secretions from the posterior fornix of women in the early stages of pregnancy were collected in the Xiangya Third Hospital of Central South University in Changsha, Hunan, China, from November 2018 to November 2019. A total of 54 cases of missed abortion (case group) and 50 cases of normal pregnancy requiring induced abortion (reference group) were analyzed. Bacterial DNA was extracted, hybridized with gene‐specific primers, and then detected using a bacterial chip. The composition and relative abundance of vaginal microbiota in the two groups were compared using α‐diversity analysis, β‐diversity analysis, and the linear discriminant analysis effect size method. Results The α‐diversity analysis showed that the Simpson index of the case group was lower than that of the reference group, whereas the Shannon index in the case group was higher. The relative abundance of Firmicutes in the case group (42.52%) was lower than in the reference group (51.03%, p < 0.05), as was the relative abundance of Lactobacillus (case group 16.51%, reference group 23.00%; p < 0.05). Interestingly, levels of Mycoplasma genitalium and Ureaplasma were lower in the case group ( p < 0.05). The relative abundance of Lactobacillus crispatus , Lactobacillus jensenii , and Lactobacillus gasseri was also significantly lower in the case group than in the reference group ( p < 0.05). The pathways enriched in the case group were predominantly related to metabolism, whereas the genetics‐related pathways were predominantly enriched in the reference group. Conclusions Bacteria are more diverse and unevenly distributed in patients with missed abortion. Decreases in the proportion of vaginal Lactobacillus and changes in Lactobacillus species in these patients may increase the chance of genital tract pathogenic bacterial infection. To our knowledge, our study was the first to observe that a decrease of Firmicutes levels in the vaginal microbiota might impair energy metabolism and have an association with missed abortion.

Sun, Dan↗
DOE OSTI2025

Comparative experimental study of heat transfer processes in accumulation energy recovery exchangers

In this study, an experimental comparison between three different energy accumulating ceramic heat exchangers for energy recovery in ventilation systems was presented. The units were selected to represent three different approaches on the energy recovery process: honeycomb structure with more accumulation mass (more energy can be stored in one unit)- Unit 1.1, honeycomb structure with lower accumulation mass- Unit 1.2, and a rectangular structure with expanded heat transfer surface- Unit 1.3. The achieved results are useful for the future application of such units in ventilation systems. It was established that all evaluated units demonstrated an acceptable effectiveness of thermal energy recovery from the exhaust air. Their average energy recovery efficiency ranged between 70 % and 80 %, aligning with expected performance benchmarks for regenerative heat exchangers employed in contemporary mechanical ventilation systems. It was also established that the factor which has the highest impact on thermal effectiveness is the heat transfer surface available in the tested heat exchangers. Units with the highest number of channels (i.e., with the highest amount of single channel walls, which can be used for heat transfer) achieve the highest thermal effectiveness. However, higher thermal effectiveness can negatively affect the ventilation potential of the units. Unit 1.3, which was characterized by the highest thermal efficiency, was also characterized by the lowest achievable flow rate. It was also found that the important technical aspect that should be taken into account when analyzing accumulation energy recovery units is also the fluctuation of the supply air temperature. The ability to ensure minimal temperature fluctuations is a significant operational advantage, as it ensures a higher level of safety at lower outside temperatures.

Energy recovery↗
NASA NTRS2018

Mineralogical Study of a White Clast from Murchison (CM2): Comparison with R-Chondrites

R-chondrites share some properties with ordinary chondrites (OC) and carbonaceous chondrites (CC). The proportions of the textural types of chondrule from R chondrites and their FeO/(FeO+MgO) ratios are similar to those of OC, but the high matrix abundance in R chondrites more closely resembles that of CC (matrix abundances: OC ~12 vol% vs. CC 34->60 vol%;). In this study, we characteristize the mineralogy of a white clast from Murchison (CM2), which was earlier considered to be a R-chondrite. First, all the petrographic and mineralogical characteristics will be described and compared with those of R-chondrites. Finally, all data will be considered in order to test, whether this clast is a real R-chondrite or a unique recrystallized chondrite?

Kerraouch, I.↗
DOE OSTI2024

Growth of organized flow coherent motions within a single-stream shear layer: 4D-PTV measurements

Abstract This study investigates the evolution of a single-stream shear layer (SSSL) originating from a wall boundary layer past a backward-facing step. Utilizing a time-resolved 3D-Particle Tracking Velocimetry (4D-PTV) technique, we track the trajectories of fluorescent particles to gain insight into the flow characteristics of the SSSL. A compact water tunnel facility ( $$\textrm{Re}_\tau =1\,240$$ Re τ = 1 240 ) is fabricated to obtain an SSSL with a perpendicular slow entrainment stream past the separation edge. A hybrid interpolation approach that combines ensemble binning and Gaussian weighting is implemented to derive minimally filtered mean and instantaneous lower- and higher-order flow field parameters. Spanwise-dominant coherent motion accompanied by finer flow scales is observed to grow due to flow entrainment through “nibbling” actions of small-scale vortices, “engulfing” by large-scale vortices, and vortex pairing events. Furthermore, the non-zero-speed stream edge grows relatively faster than the zero-speed stream edge, showing a strong asymmetry in mixing composition across a mixing layer. The SSSL reaches self-similarity at a streamwise distance of $$\approx 55\,\theta _{0}$$ ≈ 55 θ 0 , where $$\theta _0$$ θ 0 is the initial momentum thickness from the separation edge, i.e., considerably shorter than reported in previous studies. A literature comparison of growth rate parameters raises intriguing questions regarding a potential inclusive growth scaling unifying the free shear layers. A turbulent kinetic energy (TKE) budget analysis reveals a negative production region immediately downstream of the separation edge attributed to a large positive streamwise gradient of streamwise velocity. In the self-similar region, the phase-averaged flow mapping demonstrates a larger concentration of turbulence production rate around the outer edges of spanwise vortices, specifically at the intersection of braids and vortices. Furthermore, a spatial separation exists in the regions of peak production and dissipation rates within the vortex core region favoring dissipation. The braids exhibit a larger concentration of turbulence diffusion rates, indicating their function as a conduit for exchanging turbulence between neighboring coherent motions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Intensification differentially affects the delivery of multiple ecosystem services in subtropical and temperate grasslands

Intensification, the process of intensifying land management to enhance agricultural goods, results in “intensive” pastures that are planted with productive grasses and fertilized. These intensive pastures provide essential ecosystem services, including forage production for livestock. Understanding the synergies and tradeoffs of pasture intensification on the delivery of services across climatic regions is crucial to shape policies and incentives for better management of natural resources. Here, we investigated how grassland intensification affects key components of provisioning (forage productivity and quality), supporting (plant diversity) and regulating services (CO 2 and CH 4 fluxes) by comparing these services between intensive versus extensive pastures in subtropical and temperate pastures in the USDA Long-term Agroecosystem Research (LTAR) Network sites in Florida and Oklahoma, USA over multiple years. Our results suggest that grassland intensification led to a decrease in measured supporting and regulating services, but increased forage productivity in temperate pastures and forage digestibility in subtropical pastures. Intensification decreased the net CO 2 sink of subtropical pastures while it did not affect the sink capacity of temperate pastures; and it also increased environmental CH 4 emissions from subtropical pastures and reduced CH 4 uptake in temperate pastures. Intensification enhanced the global warming potential associated with C fluxes of pastures in both ecoregions. Our study demonstrates that comparisons of agroecosystems in contrasting ecoregions can reveal important drivers of ecosystem services and general or region-specific opportunities and solutions to maintaining agricultural production and reducing environmental footprints. Further LTAR network-scale comparisons of multiple ecosystem services across croplands and grazinglands intensively vs extensively managed are warranted to inform the sustainable intensification of agriculture within US and beyond. Our results highlight that achieving both food security and environmental stewardship will involve the conservation of less intensively managed pastures while adopting sustainable strategies in intensively managed pastures.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Subtle penetrant size effects on separation of carbon molecular sieve membranes derived from $\mathrm{6FDA:BPDA}$-$\mathrm{DAM}$ polyimide

Economically scalable carbon molecular sieve (CMS) hollow fiber membranes rely upon a tunable bimodal pore morphology to separate gas pairs using angstrom-level size discrimination. Freshly formed CMS membranes experience self-retarding physical aging, reflected by permeance losses and selectivity gains that stabilize over short times compared to the lifetime of the membrane. Self-retarding morphology rearrangements are of special interest here due to tightening of the largest size range of ultramicropores, thereby causing aging for polyimide-derived CMS. We report effects of such aging for two A/B penetrant pairs, C 3 H 6 /C 3 H 8 and CO 2 /CH 4 . These two pairs not only have different average sizes, $\overline{d}_{A/B}$, but also different size differences,Δd A/B , between the members in each pair. We focus primarily on the C 3 H 6 /C 3 H 8 pair, which is the most difficult of the two pairs to separate, and use some CO 2 /CH 4 results as a comparison case. We study CMS derived from 6FDA:BPDA-DAM (1:1) polyimide by pyrolysis at 550 °C, 600 °C and 650 °C. Here we suggest conditions and physical causes that expedite, retard or even suppress the aging process within CMS membranes. Finally, we suggest how analysis of CMS derived from other precursors and other penetrant pairs can be generalized by understanding the results for the 6FDA:BPDA-DAM (1:1) polyimide derived CMS.

36 MATERIALS SCIENCE↗
DOE OSTI2021

SOMAFOAM: An OpenFOAM based solver for continuum simulations of low-temperature plasmas

Here, we report the development of SOMAFOAM, a finite volume framework for performing continuum simulations of low-temperature plasmas. The primary goal of this work is to discuss the features of SOMAFOAM along with representative results provided as examples for a range of operating conditions and geometries. This includes plasma and plasma–dielectric systems operating in direct current, radio frequency, and microwave regimes from pressures as low as 100 mTorr to atmospheric pressure. The code has several useful features including the ability to run massively parallel simulations using arbitrary geometries, structured/unstructured meshes, choice of models such as drift–diffusion/full-momentum at runtime, and species-dependent timesteps to name a few. The verification/validation studies presented include comparison with previously published continuum simulations (low-pressure direct current and radio frequency plasma), with experiments (Gaseous Electronics Conference Reference Cell and microwave microplasma ignited in a split ring resonator), and previously published kinetic simulations (low-pressure radio frequency plasma). Other examples provided include a direct current atmospheric pressure microplasma bounded by dielectric sidewalls and a helium–nitrogen plasma ignited using a needle electrode facing a dielectric. The performance of the code is also discussed with serial and distributed memory parallel runs demonstrated up to 512 cores. The design and implementation of the code in a modular object-oriented framework allows for easy extension and seamless coupling with other codes and can be expected to play an important role in both academia and industry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

An improved methodology for modeling short pulse buried layer x-ray emission spectra

Radiation-hydrodynamic and spectroscopic modeling are important aspects of high energy density experimental design. In this paper, we improve the performance and capabilities over those obtainable with a previous methodology used for simulating x-ray emission spectra from buried layer targets heated by short pulse lasers. The improvement incorporates post-processing HYDRA radiation-hydrodynamic output with a non-local thermodynamic equilibrium atomic-kinetics radiation transport code, Cretin. Each code uses an independent radiation field which allows decoupling HYDRA's radiation group structure from Cretin's spectral output to improve the speed and flexibility of the design methodology. The execution time decreases from 2–3 days to a few hours while the flexibility of the improved methodology allows for performing sensitivity studies including a comparison of steady-state and time-dependent atomic kinetics and differences in the radiation group structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Metabolites of organophosphate ester flame retardants in urine from Shanghai, China

Highlights: • Nine organophosphate ester (OPE) metabolites were determined in urine from a population in Shanghai. • Urinary levels of OPE metabolites were lower than those from more developed countries. • Age of donors and age of homes were determinants of diphenyl phosphate (DPHP) and di-n-butyl phosphate (DNBP) exposures. • Urinary DNBP levels were associated with self-reported symptoms of allergy. The metabolites of nine organophosphate ester (OPE) flame retardants were measured in 180 urine samples collected from a population (including adults and children) in western Shanghai, China, using liquid chromatography-tandem spectrometry (LC-MS/MS). The total urinary concentrations of nine OPE metabolites ranged 100–23800 pg/mL, with a geometric mean (GM) value of 1450 pg/mL. The concentrations of alkyl-OPE metabolites (879 pg/mL) were approximately an order of magnitude higher than those of aryl-OPE (53.7 pg/mL) and chlorinated-OPE metabolites (52.7 pg/mL). Diphenyl phosphate (DPHP), diethyl phosphate (DEP), di-n-butyl phosphate (DNBP), bis(2-ethylhexyl) phosphate (BEHP), and bis(2-butoxyethyl) phosphate (BBOEP) were the dominant OPE metabolites found in urine. The results showed that an increase in age was associated with a significant decrease in urinary DPHP (r = −0.278, p < 0.01) and DNBP (r = −0.314, p < 0.01) concentrations. The highest concentrations of DPHP (GM = 80.7 pg/mL) and DNBP (GM = 16.9 pg/mL) were found in urine from people living in homes that were less than 10 years old. The urinary DNBP concentration was significantly associated with self-reported symptoms of allergy. Our result establishes baseline value for OPE exposure in a population in China for comparison in future studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Numerical investigation of vortex tubes with extended vortex chambers

Ranque–Hilsch vortex tubes are often utilized to produce cooling when a compressed air source is readily available. In comparison with traditional cooling technologies, vortex-tube devices are much simpler, since they do not have moving parts. However, their thermal efficiencies are also lower, so they are used primarily for industrial spot cooling. Several options to modify and improve vortex tube performance exist. While a lot of previous research efforts addressed optimization of the inlet and outlet components, the main tube variations have not been thoroughly explored beyond simple tapered tubes. In this paper we numerically investigate augmenting vortex tubes with cyclonic-type extensions of the vortex chambers. The computational fluid dynamics software STAR-CCM+ was utilized to simulate a typical counter-flow vortex tube operating with air. The numerical approach was validated via comparison to experimental studies available in the literature. A reasonably efficient high-capacity vortex tube design was parametrically analyzed. This setup and its several modifications were numerically modeled under selected external conditions. The configuration with an intermediate-size vortex chamber extension demonstrated the highest performance among the studied setups. This variant of the vortex tube was also predicted to perform better than the original system by about 15% in a range of cold-flow fractions.

08 HYDROGEN↗
DOE OSTI2017

First Results of a Phase 2 Trial of Once-Weekly Hypofractionated Breast Irradiation (WHBI) for Early-Stage Breast Cancer

Purpose: To report early outcome analysis of a prospective institutional phase 2 trial of weekly hypofractionated breast irradiation (WHBI) for patients undergoing breast-conserving surgery (BCS). Methods and Materials: Patients who underwent BCS for American Joint Committee on Cancer stage 0, I, or II breast cancer with negative surgical margins received whole-breast radiation therapy to 30 or 28.5 Gy in 5 weekly fractions with or without an additional boost. The eligibility criteria were the same as for NSABP (National Surgical Adjuvant Breast and Bowel Project) B39/RTOG (Radiation Therapy Oncology Group) 0413, and there were no restrictions on age, breast size, tumor grade, receptor status, or the use of cytotoxic chemotherapy for otherwise eligible patients. The primary endpoint was ipsilateral breast tumor recurrence. Patients were also evaluated for acute toxicity (Common Terminology Criteria for Adverse Events version 3.0), cosmesis (Harvard Scale), development of distant metastatic disease, and overall survival. Results: Between January 2011 and October 2015, 158 eligible patients underwent WHBI immediately following BCS. The median age was 60 years (range, 30-84 years), and the median follow-up period was 3 years. Ipsilateral breast tumor recurrence developed in a total of 2 patients (1.3%), 1 in conjunction with widespread metastatic disease. Distant metastatic disease developed in 4 patients (2.5%), and the 3-year disease-free survival and overall survival rates were 97.5% and 96.2%, respectively. The most common grade 1 or 2 acute toxicities were breast pain, radiation dermatitis, and fatigue. There were 2 grade 3 events (1.3%): pain requiring narcotic analgesics (1) and posttreatment infection requiring hospitalization (1). The rate of excellent or good cosmesis versus fair or poor cosmesis was 82.3% versus 17.7%. The rate of significant cosmetic change from baseline to last follow-up (dropping from excellent or good to fair or poor) was 11.6%. Conclusions: Early outcomes after WHBI are favorable and parallel those seen with daily hypofractionated whole-breast irradiation. With broader entry criteria than all previous reports of WHBI, this study will facilitate comparison to the results of NSABP B39/RTOG 0413. With continued follow-up, future reports will assess cosmetic stability and disease-specific outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

A review of energy storage technologies for demand-side management in industrial facilities

Demand-side management (DSM) in industrial facilities provides an opportunity for substantial amounts of energy cost savings, since industrial facilities are the largest energy consuming sectors globally. In this work, energy storage (ES) technologies are critically reviewed and compared with industrial DSM in mind. ES technologies reviewed herein include lithium-ion battery energy storage (BES), sodium-sulfur BES, lead-acid BES, flow BES, supercapacitor ES, superconducting magnetic ES, thermal ES, flywheel ES, pumped hydro ES, and compressed air ES. The fundamentals of these energy storage technologies are reviewed in detail including recent developments, followed by case studies and extensive comparisons. These comparisons include, but are not limited to cost per cycle analyses, levelized cost of energy analyses, and comparisons between performance, transient, and cost characteristics. Here, some key properties analyzed include the rated power, power density, efficiency, lifetime, discharge time, capital costs, and O&M costs.

25 ENERGY STORAGE↗
DOE OSTI2023

SootLib: A soot model library for combustion simulation

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and is available on GitHub. The library includes several models for soot chemistry and coagulation, and it represents the PSD using either a sectional model or the method of moments (MOM). Four closure approaches for the MOM are implemented allowing up to eight moments: monodispersed, an assumed-shape lognormal distribution, the quadrature method of moments, and the method of moments with interpolative closure. SootLib provides an interface for inclusion in other combustion packages including CFD or reacting flow solvers. The range of models allows comparisons and sensitivity studies, and the modularity facilitates extension to other soot models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Compatibility of Fuel System Elastomers and Plastics with a Fast-Pyrolysis Oil (Bio-oil) at Room Temperature

Herein the compatibility of a fast-pyrolysis bio-oil with 17 elastomer and 21 plastic materials common to fuel storage, dispensing, and delivery systems was assessed by measuring volume and hardness. Diesel was used as the baseline for comparison. The elastomer and plastic specimens were exposed to the test fuels at 23 °C. The exposure times were 4 and 16 weeks for the elastomers and plastics, respectively. The elastomers (except for silicone and styrene butadiene) exhibited pronounced swelling in the bio-oil. This was especially true for the fluorocarbons and acrylonitrile rubbers. For the elastomers, a strong correlation between polarity and volume swell was observed. Compositional and structural analysis on one of the fluorocarbon materials showed that the bio-oil was less effective at extracting phthalate additives than the diesel. However, the crystallinity of a fluorocarbon was altered by the bio-oil. Unlike the elastomers, the plastic materials were less impacted by exposure to the bio-oil. This finding is attributed to their denser and more rigid molecular structures (compared to the elastomers). Notable swelling did occur in the nylons, but this swelling was attributed to water absorption rather than polarity. Comparison with previous studies showed that the observed swelling was lower for both the elastomers and the plastics. Solubility (and hence swell) increases with temperature, and because this study was conducted at 23 °C rather than 50 °C, the reduced temperature is responsible for the lower swell levels.

09 BIOMASS FUELS↗
DOE OSTI2022

Molecular Characterization of Organosulfate-Dominated Aerosols over Agricultural Fields from the Southern Great Plains by High-Resolution Mass Spectrometry

The molecular composition of organic aerosols, especially for day/nighttime variations of organosulfates above agricultural fields, is not well understood despite profound impacts on regional climate, crop production, air quality, and human health. Here, nanospray desorption electrospray ionization with high-resolution mass spectrometry (nano-DESI-HRMS) is used to interrogate the molecular composition of organic aerosols collected at the Southern Great Plains, located in an agricultural region of Oklahoma. Identified molecular formulae featured carbon, hydrogen, oxygen (CHO), nitrogen (CHNO), and/or sulfur (CHOS, CHNOS), with higher organosulfate proportions during daytime (41%) compared to nighttime (30%). In this work, nighttime aerosols featured increases in CHO, CHNO, and extremely low volatility organic carbon (ELVOC) species. However, due to high relative humidity, the nighttime aerosols phase state was found to be more liquid-like than daytime aerosols using parametrized glass transition temperatures. Aerosol molecular composition from an anthropogenically influenced plume (southerly winds) showed significant increases in CHOS and ELVOC species. By comparison with chamber studies, CHOS species are suspected to be of mixed biogenic and anthropogenic origin, whereas CHNOS species (not identified in the southerly winds) are suggested to predominately be of biogenic origin. Overall, this study provides key insight into organosulfates above agricultural fields, demonstrating dependence upon day/night cycles and episodic anthropogenic emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Lossy compression of statistical data using quantum annealer

Abstract We present a new lossy compression algorithm for statistical floating-point data through a representation learning with binary variables. The algorithm finds a set of basis vectors and their binary coefficients that precisely reconstruct the original data. The optimization for the basis vectors is performed classically, while binary coefficients are retrieved through both simulated and quantum annealing for comparison. A bias correction procedure is also presented to estimate and eliminate the error and bias introduced from the inexact reconstruction of the lossy compression for statistical data analyses. The compression algorithm is demonstrated on two different datasets of lattice quantum chromodynamics simulations. The results obtained using simulated annealing show 3–3.5 times better compression performance than the algorithm based on neural-network autoencoder. Calculations using quantum annealing also show promising results, but performance is limited by the integrated control error of the quantum processing unit, which yields large uncertainties in the biases and coupling parameters. Hardware comparison is further studied between the previous generation D-Wave 2000Q and the current D-Wave Advantage system. Our study shows that the Advantage system is more likely to obtain low-energy solutions for the problems than the 2000Q.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Elastic anomalies across phase transitions of praseodymium to 12 GPa

The elastic properties of praseodymium (Pr) were investigated at pressures up to 12 GPa at room temperature using ultrasonic interferometry technique. Softening and discontinuities in compressional (P) and shear (S) wave velocities were observed at around 2.5, 6.5 and 10.5 GPa, which are interpreted as indications of the phase transitions from Pr-I (dhcp) to Pr-II (fcc), Pr-II (fcc) to Pr-III (d-fcc) and Pr-III (d-fcc) to Pr-VII (monoclinic or orthorhombic), respectively. Very small discontinuities in compressibility have been observed across the phase transitions of I-II and II-III of Pr, which are unlikely visible in the X-ray diffraction studies. Finally, a comparison with the elastic behaviors of other lanthanide elements (e.g., Ce and La) suggests that the elastic anomalies associated with these phase transitions are likely to be caused by the 6s-5d electron transfer and the softening of acoustic phonon mode facilitated by decreased atomic distances under pressure.

36 MATERIALS SCIENCE↗