Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cost Trends”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Magnetic control systems for large spacecraft with applications to space telescope

Magnetic control systems for large space vehicles offer the advantage of a simple, reliable, low cost augmentation to the primary control system. When used for momentum management, a magnetic torque source offers a long life and noncontaminant environment when compared to a mass expulsion torque source. These qualities make such systems suitable for employment with the Space Telescope, which is a long life, high performance vehicle with optics and scientific instruments which would be degraded by contamination due to mass expulsion products. The various applications of magnetic systems on the Space Telescope are considered. The future trend in magnetic control of large space vehicles lies in providing a known three axis reference for backup operations, such as recovery of the primary control mode.

Dougherty, H.↗

DART Core/Combustor-Noise Initial Test Results

Contributions from the combustor to the overall propulsion noise of civilian transport aircraft are starting to become important due to turbofan design trends and advances in mitigation of other noise sources. Future propulsion systems for ultra-efficient commercial air vehicles are projected to be of increasingly higher bypass ratio from larger fans combined with much smaller cores, with ultra-clean burning fuel-flexible combustors. Unless effective noise-reduction strategies are developed, combustor noise is likely to become a prominent contributor to overall airport community noise in the future. The new NASA DGEN Aero0propulsion Research Turbofan (DART) is a cost-efficient testbed for the study of core-noise physics and mitigation. This presentation gives a brief description of the recently completed DART core combustor-noise baseline test in the NASA GRC Aero-Acoustic Propulsion Laboratory (AAPL). Acoustic data was simultaneously acquired using the AAPL overhead microphone array in the engine aft quadrant far field, a single midfield microphone, and two semi-infinite-tube unsteady pressure sensors at the core-nozzle exit. An initial assessment shows that the data is of high quality and compares well with results from a quick 2014 feasibility test. Combustor noise components of measured total-noise signatures were educed using a two-signal source-separation method an dare found to occur in the expected frequency range. The research described herein is aligned with the NASA Ultra-Efficient Commercial Transport strategic thrust and is supported by the NASA Advanced Air Vehicle Program, Advanced Air Transport Technology Project, under the Aircraft Noise Reduction Subproject.

Aeroacoustics↗

Core/Combustor-Noise Baseline Measurements for the DGEN Aeropropulsion Research Turbofan

Contributions from the combustor to the overall propulsion noise of civilian transport aircraft are starting to become important due to turbofan design trends and advances in mitigation of other noise sources. Future propulsion systems for ultra-efficient commercial air vehicles are projected to be of increasingly higher bypass ratio from larger fans combined with much smaller cores, with ultra-clean burning fuel-flexible combustors. Unless effective noise-reduction strategies are developed, combustor noise is likely to become a prominent contributor to overall airport community noise in the future. The new NASA DGEN Aeropropulsion Research Turbofan (DART) is a cost-efficient testbed for the study of core-noise physics and mitigation. This paper describes the recently completed DART core/combustor-noise baseline test in the NASA GRC Aero-Acoustic Propulsion Laboratory (AAPL). Acoustic data were simultaneously acquired using the AAPL overhead microphone array in the engine aft quadrant farfield, a single midfield microphone, and two semi-infinite-tube unsteady pressure sensors at the core-nozzle exit. Combustor-noise components of measured total-noise signatures were educed using a two-signal source-separation method and are found to occur in the expected frequency range. The acoustic data compare well with results from a limited 2014 feasibility test and will serve as a high-quality baseline for future research using the DART. The research described herein is aligned with the NASA Ultra-Efficient Commercial Transport strategic thrust and is supported by the NASA Advanced Air Vehicle Program, Advanced Air Transport Technology Project, under the Aircraft Noise Reduction Subproject.

Turbomachinery Noise↗

Core/Combustor-Noise Baseline Measurements for the DGEN Aeropropulsion Research Turbofan

Contributions from the combustor to the overall propulsion noise of civilian transport aircraft are starting to become important due to turbofan design trends and advances in mitigation of other noise sources. Future propulsion systems for ultra-efficient commercial air vehicles are projected to be of increasingly higher bypass ratio from larger fans combined with much smaller cores, with ultra-clean burning fuel-flexible combustors. Unless effective noise-eduction strategies are developed, combustor noise is likely to become a prominent contributor to overall airport community noise in the future. The new NASA DGEN Aeropropulsion Research Turbofan (DART) is a cost-efficient testbed for the study of core-noise physics and mitigation. This paper describes the recently completed DART core/combustor-noise baseline test in the NASA GRC Aero-Acoustic Propulsion Laboratory (AAPL). Acoustic data was simultaneously acquired using the AAPL overhead microphone array in the engine aft quadrant far field, a single midfield microphone, and two semi-infinite-tube unsteady pressure sensors at the core-nozzle exit. Combustor-noise components of measured total-noise signatures were educed using a two-signal source-separation method and are found to occur in the expected frequency range. The acoustic data compares well with results from a limited 2014 feasibility test and will serve as a high-quality baseline for future research using the DART. The research described herein is aligned with the NASA Ultra-Efficient Commercial Transport strategic thrust and is supported by the NASA Advanced Air Vehicle Program, Advanced Air Transport Technology Project, under the Aircraft Noise Reduction Subproject.

Aeroacoustics↗

Integrated Transportation-Energy Systems Modeling

Transportation is currently the least-diversified energy demand sector, with over 90% of global transportation energy use coming from petroleum product. After over a century of petroleum dominance, however, many leading experts anticipate major electrification trends that could disrupt the transportation energy demand landscape. These changes in electricity demand complement profound changes happening within electric power supply systems, including integration of variable renewables, distributed generation and storage, and greater participation in power system planning and operations from traditionally passive consumers. This broader context underscores the importance of understanding how transportation electrification will impact electricity demand, including changes in the load shapes that characterize the system and the opportunity to leverage flexible EV charging to more cost-effectively balance demand and supply. This talk provides an overview of recent findings on infrastructure requirements to support EV adoption, integration challenges and the impact of EV on power systems, and opportunities to leverage flexible (or smart) EV charging to support power system planning and operations.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗

Decarbonization Scenarios in the United States: Comparing Biofuels Growth in Two Models - GCAM and BSM

Scenarios for deep decarbonization rely on biomass for biofuels, biopower, and bioproducts, often including negative emissions via carbon capture and storage or utilization. Despite the prominence of biomass in many deep decarbonization pathways, critical questions remain about biomass allocation, effects of transportation electrification, the pace of growth, and implications for agriculture and land use. We address these questions through a unique comparison of carbon pricing effects on the growth of biomass utilization and its effects on land use in the United States by comparing results from a multisectoral integrated assessment model, the Global Change Analysis Model [GCAM], with results from a biomass-to-biofuels system dynamics model, the Biomass Scenario Model [BSM]. We contribute to model comparison efforts by analyzing the biomass deployment needed for a scenario consistent with a "Middle of the Road" Shared Socioeconomic Pathway [SSP2] and a representative concentration pathway of 2.6 W/m2. The GCAM scenarios solve for global equilibrium conditions that are consistent with this pathway, including demands for biomass across all economic sectors and representing bioenergy with carbon capture and storage as a technology option. The BSM scenarios assess those biomass and biofuel results for the United States and identify challenges associated with that pace and amount of expansion. In the scenario analysis, we harmonize key factors such as carbon price trajectory, domestic ethanol fuel demand, ethanol blending, and arable land availability, and vary them in both models. In GCAM, we vary the carbon price, transportation electrification, ethanol blending constraints, and arable land availability inputs and the value of the carbon in land; in BSM, in addition to directly inputting certain GCAM results, we vary the maximum rate of biorefinery construction, flexibility of feedstock types across conversion processes, and policy incentives such as tax credits and renewable identification number payments. The selected carbon price trajectory results in a rapid increase in biofuel production in the United States, reaching about 9.4 EJ/year in 2060 in the highest scenario analyzed in GCAM. Results differ between the two models in timing and ultimate quantity of biomass and biofuel production. GCAM biofuel quantities generally exceed BSM amounts because CCS is applied to biofuel pathways in GCAM, and because of differences in capacity expansion and related dynamics of land allocation, biomass production, and price dynamics. These dynamics include rapid biorefinery capacity expansion in high demand cases. To satisfy this biomass demand, GCAM rapidly equilibrates land allocation, but the BSM limits the rate at which this re-allocation can occur. A further contrast with the equilibrium approach in GCAM is that the BSM represents a delay between planting and harvesting woody biomass resources. As a result of these model contrasts, feedstock costs in BSM increase more than in GCAM, and the absence of CCS in the BSM also reduces the relative economic attractiveness of biofuels production. The bottlenecks, lags, and price increases also lead to potential for volatility in feedstock price and land allocation to biomass in the BSM. GCAM has more biomass production than BSM in all scenarios, partly because of the broader, economy-wide coverage of GCAM, in contrast to BSM's exclusive focus on biofuels. In both models, trends like those of biofuels production were observed for biomass production: minimal growth without a carbon price and policy incentives, and increases with a carbon price, particularly with carbon capture and storage, because the inputs assume that biopower and biofuels decrease greenhouse gas emissions. In high policy scenarios, biomass demand is high, and the consequent high biomass prices due to the land re-allocation bottleneck in the BSM limit biofuel production even if the biorefinery capacity is expanded. However, because biomass prices do not increase as much in the low policy scenario, growth is slower and the land-reallocation bottleneck no longer dominates, such that the effect of increased capacity can be seen. Across both the models, a change in assumptions from less to more land availability increases biofuel production in both GCAM and BSM, as the upward pressure on feedstock price and volatility are both reduced.

biofuels↗

Integrating data types to estimate spatial patterns of avian migration across the Western Hemisphere

For many avian species, spatial migration patterns remain largely undescribed, especially across hemispheric extents. Recent advancements in tracking technologies and high-resolution species distribution models (i.e., eBird Status and Trends products) provide new insights into migratory bird movements and offer a promising opportunity for integrating independent data sources to describe avian migration. Here, we present a three-stage modeling framework for estimating spatial patterns of avian migration. First, we integrate tracking and band re-encounter data to quantify migratory connectivity, defined as the relative proportions of individuals migrating between breeding and nonbreeding regions. Next, we use estimated connectivity proportions along with eBird occurrence probabilities to produce probabilistic least-cost path (LCP) indices. In a final step, we use generalized additive mixed models (GAMMs) both to evaluate the ability of LCP indices to accurately predict (i.e., as a covariate) observed locations derived from tracking and band re-encounter data sets versus pseudo-absence locations during migratory periods and to create a fully integrated (i.e., eBird occurrence, LCP, and tracking/band re-encounter data) spatial prediction index for mapping species-specific seasonal migrations. To illustrate this approach, we apply this framework to describe seasonal migrations of 12 bird species across the Western Hemisphere during pre- and postbreeding migratory periods (i.e., spring and fall, respectively). We found that including LCP indices with eBird occurrence in GAMMs generally improved the ability to accurately predict observed migratory locations compared to models with eBird occurrence alone. Using three performance metrics, the eBird + LCP model demonstrated equivalent or superior fit relative to the eBird-only model for 22 of 24 species–season GAMMs. In particular, the integrated index filled in spatial gaps for species with over-water movements and those that migrated over land where there were few eBird sightings and, thus, low predictive ability of eBird occurrence probabilities (e.g., Amazonian rainforest in South America). This methodology of combining individual-based seasonal movement data with temporally dynamic species distribution models provides a comprehensive approach to integrating multiple data types to describe broad-scale spatial patterns of animal movement. Further development and customization of this approach will continue to advance knowledge about the full annual cycle and conservation of migratory birds.

59 BASIC BIOLOGICAL SCIENCES↗

Status and prospects of lithium iron phosphate manufacturing in the lithium battery industry

Abstract Lithium iron phosphate (LiFePO 4 , LFP) has long been a key player in the lithium battery industry for its exceptional stability, safety, and cost-effectiveness as a cathode material. Major car makers (e.g., Tesla, Volkswagen, Ford, Toyota) have either incorporated or are considering the use of LFP-based batteries in their latest electric vehicle (EV) models. Despite LFP’s well-researched status as a cathode material, it is expected to fulfill additional demands in electric vehicle applications, such as fast-charging capabilities, wide temperature range adaptability, and higher energy density. This perspective examines the LFP supply chain, synthetic approaches, manufacturing processes, market trends, recent advancements, and evolving demands to better understand its future role in the EV market. Graphical abstract

Lu, Yanying↗

Toward on-demand measurements of greenhouse gas emissions using an uncrewed aircraft AirCore system

This paper evaluates the performance of a multirotor uncrewed aircraft and AirCore system (UAAS) for measuring vertical profiles of wind velocity (speed and direction) and the mole fractions of methane (CH 4 ) and carbon dioxide (CO 2 ), and it presents a use case that combines UAAS measurements and dispersion modeling to quantify CH 4 emissions from a dairy farm. To evaluate the atmospheric sensing performance of the UAAS, four field deployments were performed at three locations in the San Joaquin Valley of California where CH 4 hotspots were observed downwind of dairy farms. A comparison of the observations collected on board the UAAS and an 11 m meteorological tower show that the UAAS can measure wind velocity trends with a root mean squared error varying between 0.4 and 1.1 m s -1 when the wind magnitude is less than 3.5 m s -1 . Findings from UAAS flight deployments and a calibration experiment also show that the UAAS can reliably resolve temporal variations in the mole fractions of CH 4 and CO 2 occurring over periods of 10 s or longer. Results from the UAAS and dispersion modeling use case further demonstrate that UAASs have great potential as low-cost tools for detecting and quantifying CH 4 emissions in near real time.

54 ENVIRONMENTAL SCIENCES↗

Deep-Space Optical Communications: Visions, Trends, and Prospects

Current key initiatives in deep-space optical communications are treated in terms of historical context, contemporary trends, and prospects for the future. An architectural perspective focusing on high-level drivers, systems, and related operations concepts is provided. Detailed subsystem and component topics are not addressed. A brief overview of past ideas and architectural concepts sets the stage for current developments. Current requirements that might drive a transition from radio frequencies to optical communications are examined. These drivers include mission demand for data rates and/or data volumes; spectrum to accommodate such data rates; and desired power, mass, and cost benefits. As is typical, benefits come with associated challenges. For optical communications, these include atmospheric effects, link availability, pointing, and background light. The paper describes how NASA's Space Communication and Navigation Office will respond to the drivers, achieve the benefits, and mitigate the challenges, as documented in its Optical Communications Roadmap. Some nontraditional architectures and operations concepts are advanced in an effort to realize benefits and mitigate challenges as quickly as possible. Radio frequency communications is considered as both a competitor to and a partner with optical communications. The paper concludes with some suggestions for two affordable first steps that can yet evolve into capable architectures that will fulfill the vision inherent in optical communications.

space communication↗

Trends in aerospace structures

Recent developments indicate that there may soon be a revolution in aerospace structures. Increases in allowable operational stress levels, utilization of high-strength, high-toughness materials, and new structural concepts will highlight this advancement. Improved titanium and aluminum alloys and high-modulus, high-strength advanced composites, with higher specific properties than aluminum and high-strength nickel alloys, are expected to be the principal materials. Significant advances in computer technology will cause major changes in the preliminary design cycle and permit solutions of otherwise too-complex interactive structural problems and thus the development of vehicles and components of higher performance. The energy crisis will have an impact on material costs and choices and will spur the development of more weight-efficient structures. There will also be significant spinoffs of aerospace structures technology, particularly in composites and design/analysis software.

Card, M. F.↗

Valuation and cost reduction of behind-the-meter hydrogen production in Hawaii

A 250kW hydrogen electrolysis facility was recently installed at the Natural Energy Laboratory of Hawaii Authority's (NELHA's) campus. This facility that will begin operation in 2020 to produce hydrogen for fuel cell buses on the island to demonstrate of the application of hydrogen to decarbonize transportation. Given the size of the electrolysis station, it has the potential to significantly increase electricity costs for the campus, which is subject to energy and peak demand charges from the local utility. In this paper, we analyze the cost of hydrogen production at NELHA given the rate structure options available from the utility. Production costs are estimated using optimal versus constant scheduling of the facility to meet the buses’ demand. A model of the electrolysis station is used to capture changes in production efficiency over the power range in the optimization routine. The effects of combining the station and campus load versus standalone operation and increasing solar generation are also explored. The analyses surrounding this scenario show the importance of multiple factors on the potential profitability of hydrogen production in behind-the-meter applications and show trends that could have implications for other similar installations.

08 HYDROGEN↗

Understanding Discrete Fracture Networks Through Spectral Graph Theory

Discrete Fracture Network models (DFNs) are used to simulate fluid flow and particle transport through fracture networks in low permeability rock. Understanding these processes are essential in many subsurface applications, such as environmental restoration of contaminated fractured media, CO 2 sequestration, detection of low-level nuclear tests, and hydrocarbon extraction. Compared with other models, DFNs allow for incorporation of a wider range of network characteristics but have substantially greater computation cost. These networks can be represented with graphs, allowing the use of graph theory tools to study the networks. I used Python to simulate flow and transport on a range of DFNs and analyzed these networks using methods from network analysis and spectral graph theory. My purpose was to find ways to gain insight about flow and transport on DFNs using these graph representations, bypassing the computationally intensive meshing typically required. My work is still in progress, but I have discovered several interesting trends and patterns that I believe could be useful towards my goal. If I am able to bring these results to fruition, they will aid subsurface geologists in extracting flow and transport information about fracture networks more efficiently.

54 ENVIRONMENTAL SCIENCES↗

An expert system for satellite and instrument data anomaly and fault isolation

A prototype Generic Payload Operations Control System (GPOCC) is being developed at the NASA Jet Propulsion Laboratory to provide a low-cost command and control processing center for science instruments and small payloads. The GPOCC supports the difficult transition from integration and test to flight operations. The prototype will incorporate four expert systems to perform telemetry, command, and mission planning functions as well as telecommunications scheduling. The first of these expert systems to be developed will perform telemetry data analysis and fault isolation, as well as propose corrective action. This Data Analysis Module (DAM) will monitor telemetry data and perform continual data monitoring and trend analysis based on a knowledge base and historic data archived on an optical disk storage device. The system maintains a continuous knowledge database of past system performance characteristics. The goal of the Data Analysis Module is to achieve consistent, dependable and validatable performance, to demonstrate thorough, reliable and fast reasoning, and to reduce the concentration demanded of flight analysis personnel.

Busse, Carl↗

An Experimental Investigation of Students’ Learning Effects When Using a Simplified Nuclear Simulator

Securing enough data has been a main challenge in human reliability analysis (HRA). Many researchers and institutes have made a lot of efforts for collecting HRA data to produce reasonable human error probabilities (HEPs) as well as reduce the uncertainty of HRA quantification. Representatively, U.S. Nuclear Regulatory Commission (U.S. NRC), Korea Atomic Energy Research Institute (KAERI) and Idaho National Laboratory (INL) have led lots of empirical research regarding the HRA data collection. The U.S. NRC and KAERI have mainly carried out full-scope simulator research collecting HRA data through experiments using full-scope simulators with actual operators. In contrast, INL has experimentally collected the data using simplified simulators and student operators. INL has proposed the Simplified Human Error Experimental Program (SHEEP) framework to complement full-scope data collection efforts by suggesting a way to infer full-scope data based on experimental data collected from students operating simplified simulators, specifically the Rancor Microworld Simulator (Rancor) and the Compact Nuclear Simulator (CNS). The aim of the SHEEP framework is to lower the entry point for collecting useful HRA data by securing large sample sizes at a reasonable amount of cost and labor while also guaranteeing a high degree of freedom when designing experiments. The authors’ previous research investigated whether data collected from the SHEEP framework could support a representative full-scope study. Besides, human performance differences between professional and student operators when using Rancor and CNS have been analyzed to understand the lack of fidelity of the simplified simulators and student operators within the SHEEP study. As a follow up research, this study experimentally investigates students’ learning effects and the performance trends over a certain period when using Rancor. This study aims to find out 1) how much training or education is required to collect HRA data from non-experts (i.e., students) when using Rancor and 2) how much differences there are in human performance measures between students and professional operators. In this study, a longitudinal experiment is developed. The four experiment trials with two weeks interval are carried out for sixteen undergraduate students majoring nuclear engineering at Chosun University. Totally four scenarios randomly selected from ten Rancor scenarios are used in each experiment trial. Four human performance measurements (i.e., workload, situation awareness, time and error) are considered in the experiment. Lastly, the trend of students’ performance is compared with operator data having been collected from the previous experiment.

99 GENERAL AND MISCELLANEOUS↗

Replacement of Cobalt in Medical Device Sterilization: Current Trends, Opportunities and Barriers to Adoption of X-ray and E-Beam Within the Medical Device Sterilization Market

Radioactive sources, specifically Co-60, are crucially important to the medical device sterilization industry; however, their benefits must be balanced against the need to ensure that the materials are secure. Accelerator-based sterilization methods, including X-ray and E-Beam, can in many cases sufficiently replace Co-60 and ethylene oxide, the dominant modalities currently in use; however, a lack of hands-on experience with accelerators, regulations, and a lack of capacity have hampered faster adoption of these technologies. The market is likely to change, however, given public pressures against ethylene oxide and concerns over the cost and long-term supply chain robustness of Co-60. This may provide an opportunity for growth for accelerator capabilities. Current research at Sandia National Laboratories and Argonne National Laboratory, on behalf of the Department of Energy’s National Nuclear Security Administration Office of Radiological Security, is focused on developing an understanding of the medical device sterilization marketplace, the different modalities that are used to sterilize goods, and the drivers that affect the actors within it. Research at Pacific Northwest National Laboratory, in conjunction with the medical device sterilization industry, has focused on expanding the industry’s understanding of the capabilities of X-ray sterilization and developing data that can inform the industry’s consideration of a transition towards accelerator-based devices.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Bringing forward the development of battery cells for automotive applications: Perspective of R&D activities in China, Japan, the EU and the USA

The recent development of high-performance Li-ion battery cells has sparked intensive revolutions in our society. After enabling the wireless communication, Li-ion batteries are paving the way towards a full transition to electromobility. However, the search and need for batteries with improved performance and safety at reduced cost is still ongoing. Therefore, substantial economical efforts are put in place. The 12th edition of the annual International Conference on Advanced Lithium Batteries for Automobile Applications (ABAA-12), held in October 2019 in Ulm, Germany, has been an insightful meeting during which policy makers from China, Germany, Japan, the European Commission and the USA provided an in-depth description of their respective visions on how to bring forward this technology. In this paper, we aim to give insights about the presented R&D trends and the current penetration of electric vehicles in the mass market.

25 ENERGY STORAGE↗

Improving Predictions of Spin-Crossover Complex Properties through DFT Calculations with a Local Hybrid Functional

We conducted a study on the performance of the local hybrid exchange-correlation functional PBE0r for a set of 95 experimentally-characterized iron spin crossover (SCO) complexes. The PBE0r functional is a variant of PBE0 where the exchange correction is restricted to on-site terms formulated within the basis of local orbitals. We determine the free parameters of the PBE0r functional against experimental data and other hybrid functionals. With a Hartree-Fock (HF) exchange factor of 4%, the PBE0r functional accurately reproduces the electronic and free energy trends predicted in prior DFT studies for these 95 complexes using the B3LYP functional. Larger values of HF exchange stabilize high-spin states. The PBE0r-predicted bond lengths tend to exceed the experimental bond lengths, and bond lengths are less sensitive to HF exchange. The predicted SCO transition temperatures T 1/2 from PBE0r correlate moderately with the experimental transition temperatures, showing a slight improvement compared to the previous modB3LYP-predicted T 1/2 . Furthermore, this study suggests the PBE0r functional as computationally cost-effective and offers the possibility of simulating larger complexes with accuracy comparable to other global hybrid functionals, provided the HF exchange parameter is carefully optimized.

25 ENERGY STORAGE↗