Search NASA⌕ Search

SEARCH · Search NASA

Results for “Defect modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comments on “Failure analysis of corroded hydrogen-blended natural gas pipelines based on finite element analysis and genetic algorithm-back propagation neural network” [262 (2025) 111174]

This is a brief commentary paper to highlight and discuss the determination of hydrogen concentration in pipeline steel, effect of hydrogen embrittlement (HE) on the mechanical properties of the material, burst strength of corroded pipelines using finite element analysis (FEA) simulations, and curve-fit models for assessing remaining strength of X80 corroded pipelines for transporting hydrogen blended natural gas. Recently, Xie et al. [1] proposed a methodology to quantify the impact of HE on material properties and numerically determined burst pressure of X80 corroded pipelines. However, their HE quantification overestimated the degradation of tensile strength for hydrogen blending ratios beyond the original data range, and their FEA results of burst pressure are nonconservative. This work thus recharacterized the hydrogen concentration in the steel pipeline and the effect of HE on tensile strength, and then redetermined burst pressures for a set of typical corrosion defect cases considered by Xie et al. [1] based on an experimentally validated FEA modelling method. With the new FEA results, two empirical corrosion models were proposed for X80 corroded pipelines for hydrogen service. At zero hydrogen blending ratio, the novel empirical models predict burst pressures to be consistent with the industry-accepted corrosion models. Furthermore, both the numerical simulation method and the novel corrosion models are significant contributions to the pipeline industry and the hydrogen community. Application of these results will enhance the safety, reliability, and integrity of natural gas pipelines when used to transport hydrogen.

Burst pressure prediction↗
DOE OSTI2018

iPSC-derived neurons profiling reveals GABAergic circuit disruption and acetylated α-tubulin defect which improves after iHDAC6 treatment in Rett syndrome

Highlights: • Development of a patient-specific neuronal model for Rett syndrome using iPSCs. • GABAergic circuits up-regulation in Rett iPSC-derived neurons. • Reduction of acetylated α-tubulin in Rett neurons, reverted by selective HDAC6 inhibitors. Mutations in MECP2 gene have been identified in more than 95% of patients with classic Rett syndrome, one of the most common neurodevelopmental disorders in females. Taking advantage of the breakthrough technology of genetic reprogramming, we investigated transcriptome changes in neurons differentiated from induced Pluripotent Stem Cells (iPSCs) derived from patients with different mutations. Profiling by RNA-seq in terminally differentiated neurons revealed a prominent GABAergic circuit disruption along with a perturbation of cytoskeleton dynamics. In particular, in mutated neurons we identified a significant decrease of acetylated α-tubulin which can be reverted by treatment with selective inhibitors of HDAC6, the main α-tubulin deacetylase. These findings contribute to shed light on Rett pathogenic mechanisms and provide hints for the treatment of Rett-associated epileptic behavior as well as for the definition of new therapeutic strategies for Rett syndrome.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Temperature-dependent defect accumulation and evolution in Ni-irradiated NiFe concentrated solid-solution alloy

Temperature significantly affects defect migration and evolution in irradiated materials. However, the effects of temperature on defect evolution in concentrated solid-solution alloys (CSAs), including high entropy alloys, are not well understood, despite their potential as structural materials in advanced nuclear reactors. As an important model system of these CSAs, equiatomic Ni 50 Fe 50 (NiFe) was selected to understand the effects of temperature on defect evolution during irradiation and subsequent thermal annealing. Specifically, defect accumulation and evolution in NiFe alloy under Ni-ion irradiation at 150, 300, and 500 K were studied, and the irradiated specimens were subsequently annealed at higher temperatures. Rutherford backscattering spectrometry along the <100> channeling direction was employed to study damage accumulation and evolution before and after each irradiation and annealing experiment. Here we show that more defects survive and accumulate at 150 K, but more importantly defects can migrate to deeper depths at this low irradiation temperature. Irradiation-induced damage at 150 and 300 K does not recover substantially after post-irradiation annealing at 500 K, but dramatic recovery is observed after post-irradiation annealing at 700 K, indicating an onset temperature of defect recovery between 500 and 700 K. Here, the migration of irradiation-induced defects upon annealing is closely related to the mobility and stress state arising from the surviving defects. With the consideration of five stages of defect recovery in conventional dilute alloys, the underlying mechanisms for temperature-dependent defect accumulation and evolution in NiFe CSA are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Crystal Structure and Atomic Vacancy Optimized Thermoelectric Properties in Gadolinium Selenides

Thermoelectric materials enable the energy conversion of waste heat into electricity, helpful to relieve global energy crisis. Here, we report a systematic investigation on high-temperature thermoelectric gadolinium selenides, cubic Gd 3-x Se 4 (x = 0.16, 0.21 and 0.25) and orthorhombic Gd 2 Se 3-y (y = 0.02, 0.06 and 0.08). High energy synchrotron x-ray diffraction and total scattering have been used to investigate the crystallographic and local structures. Atomic-scale clusters of Gd vacancy in the cubic phase are observed by employing the reverse Monte Carlo simulation. For cubic Gd 3-x Se 4 , adjusting Gd vacancy triggers the effect of multiple conduction bands, confirmed by the increase in effective masses and theoretical calculations. A reasonable peak zT value of 0.27 is achieved at 850 K for Gd 3-x Se 4 (x = 0.16). On the other hand, tuning Se vacancy enables the optimization of electron concentration for the orthorhombic Gd 2 Se 3-y . More significantly, its low deformation potential (Ξ = 12eV) gives rise to enhanced electron mobility and higher peak zT value of 0.54 at 850 K for Gd 2 Se 3-y (y = 0.02). Intriguingly, a higher zT of 1.2 at 1200 K is reasonably predicted by quality factor analysis. Finally, this work extends the scope of high-temperature thermoelectric materials and facilitates the exploration of novel high-temperature thermoelectric materials

36 MATERIALS SCIENCE↗
DOE OSTI2019

Size-Dependent Asymmetric Auger Interactions in Plasma-Produced n- and p-Type-Doped Silicon Nanocrystals

Nonradiative Auger recombination (AR) tends to dominate carrier dynamics in charged, quantum-confined structures. Consequently, it complicates the practical realization of many semiconductor nanocrystal (NC)-based devices such as light-emitting diodes, photovoltaic cells, and single-photon emitters, in which charged exciton states often occur. To this end, extensive experimental studies on direct band gap NCs have investigated the trion components (both positive and negative) that construct the total AR rate. However, such an analysis has remained elusive for indirect band gap Si NCs. In this study, we investigate AR decay of non-thermal plasma-produced n- and p-type-doped Si NCs. We expand the study over a large NC size range (D NC ~ 3-8 nm), in which n- and p-type doping is achieved by either a substitutional or surface doping effect, respectively. First, we monitor the AR of charge-neutral multiexcitons by measuring the biexciton lifetime (t X X) as a function of the NC size and doping configuration. We show that this method can be used to determine the presence of free carriers for any doped NC system, regardless of the presence/absence of defect channels in the carrier dynamics. Second, we develop a photophysical fitting model to determine the Auger lifetime of the simplest charged states in Si NCs: the negative (t X - ) and positive (t X + ) trions. Trion lifetimes shorten with increasing quantum confinement, as expected from (1) closer spatial proximity of the interacting charges and (2) increased relaxation of the momentum conservation rule. While both t X - and t X + are in the nanosecond time regime (and both therefore completely dominate the carrier dynamics), AR with excess holes is faster. This asymmetry is explained by a higher density of valence band states in comparison to the conduction band states, due to effective mass differences between electrons and holes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Topological solitonic macromolecules

Being ubiquitous, solitons have particle-like properties, exhibiting behaviour often associated with atoms. Bound solitons emulate dynamics of molecules, though solitonic analogues of polymeric materials have not been considered yet. Here we experimentally create and model soliton polymers, which we call “polyskyrmionomers”, built of atom-like individual solitons characterized by the topological invariant representing the skyrmion number. With the help of nonlinear optical imaging and numerical modelling based on minimizing the free energy, we reveal how topological point defects bind the solitonic quasi-atoms into polyskyrmionomers, featuring linear, branched, and other macromolecule-resembling architectures, as well as allowing for encoding data by spatial distributions of the skyrmion number. Application of oscillating electric fields activates diverse modes of locomotion and internal vibrations of these self-assembled soliton structures, which depend on symmetry of the solitonic macromolecules. Our findings suggest new designs of soliton meta matter, with a potential for the use in fundamental research and technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Modeling and projecting implosion performance for the National Ignition Facility

Steady progress is being made in inertial confinement fusion experiments at the National Ignition Facility (NIF). Nonetheless, substantial further progress is still needed to reach the ultimate goal of fusion ignition. Closing the remaining gap will require either improving the quality of current implosions, increasing the implosion scale (and correspondingly the energy delivered by NIF), or some combination of the two. But how much of an improvement in implosion quality or energy scale is required to reach ignition? To reliably answer this question, an accurate understanding of current and past experiments is first required. Previous modeling efforts of NIF implosions have shown the need to resolve a wide range of scales (from microns to millimeters) as well as a faithful representation of the genuinely three-dimensional (3D) character of the stagnation process. Modeling NIF implosions is further complicated by the many perturbation sources that have been found to influence integrated implosion performance: flux asymmetries from the surrounding hohlraum, engineering features such as support tents and fill tubes, surface defects and contaminants, and more recently the radiation shadow cast by the fill tube on the capsule. A model including all of these effects, and with adequate resolution, challenges current computing capabilities but has recently become feasible on the largest computers. Here, we review the status of these multi-effect, 3D simulations of NIF implosions, their comparison to experimental data, and preliminary results on scaling these simulations to the threshold of ignition on NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

In-Situ Transmission Electron Microscopy Study of the Evolution of Extended Defects in Oxide Nuclear Fuels

In-situ transmission electron microscopy (TEM) with simulated extreme environments is an effective tool for understanding and tracking microstructural changes down to the atomic scale. The objective of this research is to study the effect of temperature on the evolution of extended defects in ThO2 and UO2. Here, we present in-situ TEM isochronal thermal annealing experiments using a micro-electro-mechanical-system (MEMS)-based heating holder. ThO2 and UO2 single crystal specimens were grown inside an inert silver ampoule using hydrothermal synthesis. Both samples were irradiated using 2 MeV protons at 600oC up to 0.1 dpa at Texas A&M University’s Accelerator Laboratory. Fig. 1a shows a weak-beam dark field TEM image of ThO2 after irradiation, indicating the presence of faulted 1/3 <111> type dislocation loops. This presentation will discuss the effect of annealing temperature (600oC, 800oC, 1000oC, 1100oC, etc.) on dislocation loop density, size and distribution, loop nature (interstitial/vacancies) and Burgers vector, as well as the formation of voids in both ThO2 and UO2. This work will also discuss the interaction between defects during annealing. The in-situ TEM annealing cycle is shown in Fig 1b. This research significantly improves the understanding of defect behavior in oxide nuclear fuels with temperature and will aid computational modeling efforts. This work was supported as part of the Center for Thermal Energy Transport under Irradiation (TETI) Energy Frontier Research Center, funded by the U.S. Department of Energy Office of Science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Deep learning of accurate force field of ferroelectric HfO 2

The discovery of ferroelectricity in HfO 2 -based thin films opens up new opportunities for using this silicon-compatible ferroelectric to realize low-power logic circuits and high-density nonvolatile memories. The functional performances of ferroelectrics are intimately related to their dynamic responses to external stimuli such as electric fields at finite temperatures. Molecular dynamics is an ideal technique for investigating dynamical processes on large length and time scales, though its applications to new materials are often hindered by the limited availability and accuracy of classical force fields. Here we present a deep neural network–based interatomic force field of HfO 2 learned from ab initio data using a concurrent learning procedure. The model potential is able to predict structural properties such as elastic constants, equation of states, phonon dispersion relationships, and phase transition barriers of various hafnia polymorphs with accuracy comparable with density functional theory calculations. Here, the validity of this model potential is further confirmed by the reproduction of experimental sequences of temperature-driven ferroelectric-paraelectric phase transitions of HfO 2 with isobaric-isothermal ensemble molecular dynamics simulations. We suggest a general approach to extend the model potential of HfO 2 to related material systems including dopants and defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Neutron studies of gauge field and charge in Ih heavy-water ice

The distinctive character of water ice results from the partially disordered combination of covalent and hydrogen bonds in the network of hydrogen and oxygen atoms. The nontrivial hydrogen correlations we report in diffuse neutron scattering are analytically fit via a description of this state as a topological system exhibiting an emergent gauge field. This enables the density of correlation-terminating point defects to be decided as one defect per 500 oxygen sites at 30 K. Application of an analytical model of ice paves the way towards a detailed understanding of this ubiquitous solid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Structural properties of plastically deformed SrTiO 3 and KTaO 3

Dislocation engineering has the potential to open new avenues toward the exploration and modification of the properties of quantum materials. Strontium titanate (SrTi⁢O 3 , STO) and potassium tantalate (KTa⁢O 3 , KTO) are incipient ferroelectrics that show metallization and superconductivity at extremely low charge-carrier concentrations and have been the subject of resurgent interest. These materials also exhibit remarkable ambient-temperature ductility, and thus represent exceptional platforms for studies of the effects of deformation-induced dislocation structures on electronic properties. Recent work on plastically deformed STO revealed an enhancement of the superconducting transition temperature and the emergence of local ferroelectricity and magnetism near self-organized dislocation walls. Here, in this work, we present a comprehensive structural analysis of plastically deformed STO and KTO, employing specially designed strain cells, diffuse neutron and x-ray scattering, Raman scattering, and nuclear magnetic resonance (NMR). Diffuse scattering and NMR provide insight into the dislocation configurations and densities and their dependence on strain. As in the prior work on STO, Raman scattering reveals evidence for local ferroelectric order near dislocation walls in plastically deformed KTO. Our findings provide valuable information about the self-organized defect structures in both materials, and they position KTO as a second model system in which to explore the associated emergent physics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantitative measurements of dislocations in metals for advancing predictive simulations

LLNL applications require scientists to predict how materials evolve under various thermomechanical conditions. While this is achieved through physics-based simulations, uncertainty in the predictions of mechanical properties remains a serious challenge that limits the predictive capabilities of models because we lack methods to compare predictions of atomic-scale defects (dislocations) with experimental measurements. High energy X-ray diffraction (HEXRD) is the most relevant technique that can provide the necessary statistical information on dislocations. However, this technique is not yet quantitative because we lack a precise understanding of the relationship between X-ray diffraction patterns and the underlying material dislocation content and arrangements. To address this need, we used our novel computational X-ray diffraction method to simulate the effect of dislocations on the diffraction patterns. We compared virtual and experimental diffraction patterns. Results allowed us to clearly establish the relationship between X-ray diffraction patterns and the underlying dislocation structures, proving that it is feasible to quantitatively measure dislocation statistics with HEXRD. This project delivered a method that can provide the missing piece to LLNL’s mechanical property simulations in advanced metals by obtaining experimentally long-needed quantitative dislocation data, which could fully enable predictive capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

pvcracks: trained VAE model

The resulting model weights for the variational autoencoder for solar cell crack parametrization to be loaded into the python code for other to use

14 SOLAR ENERGY↗
DOE OSTI2022

Listeria monocytogenes requires cellular respiration for NAD+ regeneration and pathogenesis

Cellular respiration is essential for multiple bacterial pathogens and a validated antibiotic target. In addition to driving oxidative phosphorylation, bacterial respiration has a variety of ancillary functions that obscure its contribution to pathogenesis. We find here that the intracellular pathogen Listeria monocytogenes encodes two respiratory pathways which are partially functionally redundant and indispensable for pathogenesis. Loss of respiration decreased NAD + regeneration, but this could be specifically reversed by heterologous expression of a water-forming NADH oxidase (NOX). NOX expression fully rescued intracellular growth defects and increased L. monocytogenes loads >1000-fold in a mouse infection model. Consistent with NAD + regeneration maintaining L. monocytogenes viability and enabling immune evasion, a respiration-deficient strain exhibited elevated bacteriolysis within the host cytosol and NOX expression rescued this phenotype. These studies show that NAD + regeneration represents a major role of L. monocytogenes respiration and highlight the nuanced relationship between bacterial metabolism, physiology, and pathogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Magnetic Fluctuations in Niobium Pentoxide

Using a spin-polarized muon beam we were able to capture magnetic dynamics in an amorphous niobium pentoxide thin film. Muons are used to probe internal magnetic fields produced by defects. Magnetic fluctuations could be described by the dynamical Kubo-Toyabe model considering a time-dependent local magnetic field. We state that observed fluctuations result from the correlated motion of electron spins. We expect that oxygen vacancies play a significant role in these films and lead to a complex magnetic field distribution which is non-stationary. The characteristic average rate of magnetic field change is on the order of 100~MHz. The observed dynamics may provide insight into potential noise sources in Nb-based superconducting devices, while also highlighting the limitations imposed by amorphous oxides.

Krasnikova, Y.↗
DOE OSTI2020

Analysis of tow architecture variability in biaxially braided composite tubes

Spatial deviations in composite braid unit cell dimensions limit mechanical performance and are challenging to model. Full-field measurements of the irregular tow placement in biaxially braided composite tubes were obtained by digital image correlation. Analysis of the reconstructed tow paths showed long-range defects along the hoop direction with short-range defects dominating the biased tow direction. A route toward numerical simulation of the composite response is established by developing a 3D model of the composite using the measured tow trajectories. Finally, a comparison to previously-published triaxial braid results indicates axial tows work to constrain unit cells dimensions along the hoop direction.

3-Dimensional reinforcement↗
DOE OSTI2023

Structure and Site Evolution of Framework Ni Species in MIL-127 MOFs for Propylene Oligomerization Catalysis

A mixed-valence oxotrimer metal–organic framework (MOF), Ni-MIL-127, with a fully coordinated nickel atom and two iron atoms in the inorganic node, generates a missing linker defect upon thermal treatment in helium (>473 K) to engender an open coordination site on nickel which catalyzes propylene oligomerization devoid of any cocatalysts or initiators. This catalyst is stable for ~20 h on stream at 500 kPa and 473 K, unprecedented for this chemistry. The number of missing linkers on synthesized and activated Ni-MIL-127 MOFs is quantified using temperature-programmed oxidation, 1 H nuclear magnetic resonance spectroscopy, and X-ray absorption spectroscopy to be ~0.7 missing linkers per nickel; thus, a majority of Ni species in the MOF framework catalyze propylene oligomerization. In situ NO titrations under reaction conditions enumerate ~62% of the nickel atoms as catalytically relevant to validate the defect density upon thermal treatment. Propylene oligomerization rates on Ni-MIL-127 measured at steady state have activation energies of 55–67 kJ mol –1 from 448 to 493 K and are first-order in propylene pressures from 5 to 550 kPa. Density functional theory calculations on cluster models of Ni-MIL-127 are employed to validate the plausibility of the missing linker defect and the Cossee–Arlman mechanism for propylene oligomerization through comparisons between apparent activation energies from steady-state kinetics and computation. Here this study illustrates how MOF precatalysts engender defective Ni species which exhibit reactivity and stability characteristics that are distinct and can be engineered to improve catalytic activity for olefin oligomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗