Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Microstructural Evolution and the Precipitation Behavior in X90 Linepipe Steel During Isothermal Processing

Thermomechanical controlled processing of 560-MPa (X90) linepipe steel was simulated in the laboratory using a thermomechanical simulator to study the microstructural evolution and precipitation behavior during isothermal holding. The results indicated that martensite was obtained when the steels were isothermally held for 5 s at 700 °C. Subsequently, granular bainite and acicular ferrite transformation occurred with increased holding time. Different amount of polygonal ferrite formed after isothermally holding for 600-3600 s. Pearlite nucleated after isothermally holding for 3600 s. Precipitation occurred after isothermal holding for 5 s and continuous precipitation occurred at grain boundaries after isothermally holding for 600 s. After isothermally holding for 3600 s, large Nb/Ti carbide precipitated. The presence of MX-type precipitates was confirmed by diffraction pattern. The interphase precipitation (IP) occurred between 5 and 30 s. Maximum hardness was obtained after isothermally holding for 600 s when IP occurred and rapidly decreased to a low value, mainly because polygonal ferrite dominated the microstructure after isothermally holding for 3600 s.

36 MATERIALS SCIENCE↗

Strain evolution in Zr-2.5 wt% Nb observed with synchrotron X-ray diffraction

Highlights: • The X-ray diffraction is useful for in-situ monitoring of lattice strain thermal changes in differently oriented grains. • 2D elastic strain evaluation performed for α-matrix and for δ-hydride. • A change in matrix strain considered as a sum of metal thermal expansion, effect of hydrogen, and inter-granular strain. • Differently oriented hydrides have different lattice parameter and start from different strain states. The mechanical behaviour of hydrides in Zr alloy at low hydrogen concentrations continues to be the subject of research due to wide engineering application and highly complex behaviour of the Zr-H system. Significant structural differences between hydrides and α-Zr cause large dilatational strains associated with formation of the hydride precipitates in zirconium. Two hydride populations were observed to form under different strain states in the α-Zr matrix. The hysteresis of the hydrogen solubility is detected both in intensity and in strain curves for measured δ(111), α(00.2) and α{10.0} peaks. A two-dimensional analysis of α-strain was performed for the axial-hoop, hoop-radial, and axial-radial planes of Zr-2.5 wt% Nb pressure tube material. Variations in the hydrostatic and deviatoric strain components of the α-Zr with temperature were examined. In addition, a change in phase strain during a thermal excursion was considered as a sum of three cooperating components: phase thermal expansion (ε{sub T}), strains associated with other phase presenting in material (ε{sub [H]} or ε{sub matrix}), and inter-granular strain within the phase caused by Type II stresses (ε{sub other}). The present study broadens our understanding of strain evolution in a Zr-H system undergoing hydride dissolution and precipitation. An X-ray synchrotron diffraction technique enables the in-situ following of strain variations in differently oriented grain families during the thermal cycle. In contrast to widely reported the average strain value within the α-phase, the diffraction patterns generated with this technique allow the evaluation of the anisotropic directionality of strains in different phases in Zr-H system generated during phase transformation.

36 MATERIALS SCIENCE↗

Brominated carbon black: An EDXD study

An energy dispersive X-Ray study of pure and brominated carbon black was carried out. The analysis of the diffraction patterns reveals that the low bromine load (ca.1% mol) is trapped into the structure, without significantly modifying it. This allows the application of the difference methods, widely tested for electrolyte solutions, inorganic matrices containing metals and isomorphic substitutions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

YbCuBi ARCS + POWGEN data

This dataset contains temperature-dependent powder diffraction patterns collected at POWGEN, SNS (10K - 520K), and inelastic neutron scattering data collected at ARCS, SNS at corresponding temperatures on YbCuBi powder samples.

36 MATERIALS SCIENCE↗

Domain Texture of the Orthorhombic Phase of La 2-x Ba x CuO 4

Bragg Coherent Diffraction Imaging (BCDI) experiments have been carried out at the Advanced Photon Source using a new cryostat system developed to achieve high mechanical stability and low vibrations. Here, we measured the (012) LTO Bragg peak which is unique to the low-temperature orthorhombic (LTO) phase of micron-sized crystals of the High-temperature Superconductor La 2-x Ba x CuO 4 (LBCO) to study the formation of structural domains. Each time the sample was cooled into the orthorhombic phase, the diffraction pattern of domains was different. Finally, this confirms the interpretation of pinning of the lower-temperature Charge Density Wave domains observed in coherent resonant X-ray speckle correlation analysis experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transmission electron microscopy study of precipitates in an artificially aged Al–12.7Si–0.7Mg alloy

An investigation of Al–12.7Si–0.7Mg alloy aged at 160 °C, 180 °C and 200 °C for 3 h was carried out in order to identify the precipitating phases. Regular transmission and high resolution electron microscopy (TEM and HREM) were employed for this purpose. The studies were focused on the dark spots and needle-shaped precipitates lying in (001){sub Al} plane. Based on the HREM observations, dark spots and needle-shaped precipitates have different characteristics. The results revealed that the ellipsoidal and needle-shaped precipitates along <100> direction of the matrix coexist in the alloy by tilting experiments at given aging condition. The ellipsoidal dark spot precipitates viewing along [001]{sub Al} is not cross-sectional image of needle-shaped precipitates along <001>{sub Al}. Needle-shaped precipitate is coherent with the matrix. The diffraction pattern associated with the ellipsoidal precipitates is consistent with β″ reported in literature. - Highlights: • Wrought Al–Si–Mg alloy has been investigated to identify the precipitating phases. • The ellipsoidal and needle-shaped precipitates coexist in wrought Al–Si–Mg alloy. • The needle-shaped and ellipsoidal precipitates exhibit different characteristics.

36 MATERIALS SCIENCE↗

Hollow Atom Production Due to High Intensity X-ray Sources Irradiating Clusters And Its Applications

This paper shows the production of hollow atoms and the proposal of the measurement by using x-ray flux irradiating clusters by continuing work from our previous papers left braceK. Moribayashi, J.Phys.B, 41 085602 (2008)right brace. The x-ray emissions from hollow atoms produced by high intensity x-ray sources are employed for this measurement. This measurement is useful for the application of laser-driven x-ray sources and x-ray free electron lasers to the measurement of diffraction patterns of bio-molecules, which is indispensable for the study of their three-dimensional structure. This paper develops the methods and discussions of our previous paper. Namely, the electron impact ionization processes are added to our calculation model. Further, the size effects of the targets are shown.

74 ATOMIC AND MOLECULAR PHYSICS↗

Time-Resolved Electron Diffraction from Selectively Aligned Molecules

We experimentally demonstrate ultrafast electron diffraction from transiently aligned molecules in the absence of external (aligning) fields. A sample of aligned molecules is generated through photodissociation with femtosecond laser pulses, and the diffraction pattern is captured by probing the sample with picosecond electron pulses shortly after dissociation - before molecular rotation causes the alignment to vanish. In our experiments the alignment decays with a time constant of 2.6{+-}1.2 ps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and resistivity of bismuth nanobelts in situ synthesized on silicon wafer through an ethanol-thermal method

Bismuth nanobelts in situ grown on a silicon wafer were synthesized through an ethanol-thermal method without any capping agent. The structure of the bismuth belt-silicon composite nanostructure was characterized by scanning electron microscope, energy-dispersive X-ray spectroscopy, and high resolution transmission electron microscope. The nanobelt is a multilayered structure 100-800 nm in width and over 50 {mu}m in length. One layer has a thickness of about 50 nm. A unique sword-like nanostructure is observed as the initial structure of the nanobelts. From these observations, a possible growth mechanism of the nanobelt is proposed. Current-voltage property measurements indicate that the resistivity of the nanobelts is slightly larger than that of the bulk bismuth material. - Graphical Abstract: TEM images, EDS, and electron diffraction pattern of bismuth nanobelts. Highlights: Black-Right-Pointing-Pointer Bismuth nanobelts in situ grown on silicon wafer were achieved. Black-Right-Pointing-Pointer Special bismuth-silicon nanostructure. Black-Right-Pointing-Pointer Potential application in sensitive magnetic sensor and other electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A combined Kirkpatrick-Baez mirror and multilayer lens for sub-10 nm x-ray focusing

We have used a combined optical system of a high gain elliptic Kirkpatrick-Baez mirror system (KB) and a multilayer Laue lens (MLL) positioned in the focal plane of the KB for hard x-rays nano-focusing. The two-step focusing scheme is based on a high acceptance and high gain elliptical mirror with moderate focal length and a MLL with ultra-short focal length. Importantly, fabrication constraints, i.e. in mirror polishing and bending, as well as MLL deposition can be significantly relaxed, since (a) the mirror focus in the range of 200-500 nm is sufficient, and (b) the number of layers of the MLL can be correspondingly small. First demonstrations of this setup at the coherence beamline of the PETRA III storage ring yield a highly divergent far-field diffraction pattern, from which the autocorrelation function of the near-field intensity distribution was obtained. The results show that the approach is well suited to reach smallest spot sizes in the sub-10nm range at high flux.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrochemical deposition of iron sulfide thin films and heterojunction diodes with zinc oxide

Iron sulfide thin films were fabricated by the electrochemical deposition method from an aqueous solution containing FeSO{sub 4} and Na{sub 2}S{sub 2}O{sub 3}. The composition ratio obtained was Fe:S:O = 36:56:8. In the photoelectrochemical measurement, a weak negative photo-current was observed for the iron sulfide films, which indicates that its conduction type is p-type. No peaks were observed in X-ray diffraction pattern, and thus the deposited films were considered to be amorphous. For a heterojunction with ZnO, rectification properties were confirmed in the current-voltage characteristics. Moreover, the current was clearly enhanced under AM1.5 illumination.

36 MATERIALS SCIENCE↗

Measurement of coherence length and incoherent source size of hard x-ray undulator beamline at Pohang Light Source-II

We measured the spatial coherence length and incoherent source size of a hard x-ray undulator beamline at Pohang Light Source-II, the stored electron energy of which has been increased from 2.5 GeV to 3 GeV. The coherence length was determined by single-slit measurement of the visibility of the Fresnel diffraction pattern. The correlated incoherent source size was cross-checked for three different optics: the single slit, beryllium parabolic compound refractive lenses, and the Fresnel zone plate. We concluded that the undulator beamline has an effective incoherent source size (FWHM) of 540 μm (horizontal) × 50 μm (vertical)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterising the large coherence length at diamond’s beamline I13L

I13 is a 250 m long hard x-ray beamline (6 keV to 35 keV) at the Diamond Light Source. The beamline comprises of two independent experimental endstations: one for imaging in direct space using x-ray microscopy and one for imaging in reciprocal space using coherent diffraction based imaging techniques [1]. An outstanding feature of the coherence branch, due to its length and a new generation of ultra-stable beamline instrumentation [2], is its capability of delivering a very large coherence length well beyond 200 μm, providing opportunities for unique x-ray optical experiments. In this paper we discuss the challenges of measuring a large coherence length and present quantitative measurement based on analyzing diffraction patterns from a boron fiber [3]. We also discuss the limitations of this classical method in respect to detector performance, very short and long coherence lengths. Furthermore we demonstrate how a Ronchi grating setup [4] can be used to quickly establish if the beam is coherent over a large area.

43 PARTICLE ACCELERATORS↗

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4{sub 1}/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-gel derived PZT films doped with vanadium pentoxide

The present research investigated the sol-gel preparation, dielectric and ferroelectric properties of PZT films doped with 5 mol% vanadium oxide. Stable PZTV sols can be readily formed, and homogeneous, micrometer thick and pinhole-free PZTV films were obtained by using spin coating followed with rapid annealing. The X-ray diffraction patterns revealed that no parasitic or secondary phases were formed in the sol-gel PZT films with the addition of vanadium oxide. The material doped with vanadium pentoxide showed enhanced dielectric constant and remanent polarization with reduced loss tangent and coercive field.

36 MATERIALS SCIENCE↗

Effects of Disodium Phosphate Concentration (Na{sub 2}HPO{sub 4}·2H{sub 2}O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al Alloy

Since the electrolyte composition plays a pivotal role in the microstructure and corrosion behavior of plasma electrolytic oxidation (PEO) coatings, the effects of disodium phosphate (Na{sub 2}HPO{sub 4}·2H{sub 2}O) concentration on the microstructure and corrosion resistance of PEO coatings fabricated on 2024 Al alloy were studied in this investigation. Accordingly, electrolyte with four different concentrations of phosphate ion (5, 10, 15 and 20 g/L) was used. All PEO processes were conducted at constant current density of 15 A/dm{sup 2} for 15 min. The surface and cross-sectional morphologies of the coatings indicated that the coating formed in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O (with 9.14 µm thickness) had the most compact and uniform structure with the lowest and smallest micropores. Furthermore, studying the corrosion behavior of samples in 3.5 wt.% NaCl solutions by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests revealed that the sample coated in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O had the highest corrosion potential, the lowest corrosion current density and, accordingly, the best corrosion resistance. The corrosion resistance of this coating was 4.574 × 10{sup 5} Ω cm{sup 2}, which could increase the corrosion resistance of uncoated 2024 Al alloy substrate 48 times. The x-ray diffraction pattern of this coating proved that the coating was composed of α-Al{sub 2}O{sub 3} and γ-Al{sub 2}O{sub 3} phases.

36 MATERIALS SCIENCE↗