Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Compatibility of a Diffractive Pupil and Coronagraphic Imaging

Detection and characterization of exo-earths require direct-imaging techniques that can deliver contrast ratios of 10(exp 10) at 100 milliarc-seconds or smaller angular separation. At the same time, astrometric data is required to measure planet masses and can help detect planets and constrain their orbital parameters. To minimize costs, a single space mission can be designed using a high efficiency coronograph to perform direct imaging and a diffractive pupil to calibrate wide-field distortions to enable high precision astrometric measurements. This paper reports the testing of a diffractive pupil on the high-contrast test bed at the NASA Ames Research Center to assess the compatibility of using a diffractive pupil with coronographic imaging systems. No diffractive contamination was found within our detectability limit of 2x10(exp -7) contrast outside a region of 12lambda/D and 2.5x10(exp -6) within a region spanning from 2 to 12lambda/D. Morphology of the image features suggests that no contamination exists even beyond the detectability limit specified or at smaller working angles. In the case that diffractive contamination is found beyond these stated levels, active wavefront control would be able to mitigate its intensity to 10(exp -7) or better contrast.

Bendek, Eduardo↗

Nanostructure Diffraction Gratings for Integrated Spectroscopy and Sensing

The present disclosure pertains to metal or dielectric nanostructures of the subwavelength scale within the grating lines of optical diffraction gratings. The nanostructures have surface plasmon resonances or non-plasmon optical resonances. A linear photodetector array is used to capture the resonance spectra from one of the diffraction orders. The combined nanostructure super-grating and photodetector array eliminates the use of external optical spectrometers for measuring surface plasmon or optical resonance frequency shift caused by the presence of chemical and biological agents. The nanostructure super-gratings can be used for building integrated surface enhanced Raman scattering (SERS) spectrometers. The nanostructures within the diffraction grating lines enhance Raman scattering signal light while the diffraction grating pattern of the nanostructures diffracts Raman scattering light to different directions of propagation according to their wavelengths. Therefore, the nanostructure super-gratings allows for the use of a photodetector array to capture the surface enhanced Raman scattering spectra.

Guo, Junpeng↗

Scattering and Diffraction of Electromagnetic Radiation: An Effective Probe to Material Structure

Scattered electromagnetic waves from material bodies of different forms contain, in an intricate way, precise information on the intrinsic, geometrical and physical properties of the objects. Scattering theories, ever deepening, aim to provide dependable interpretation and prediction to the complicated interaction of electromagnetic radiation with matter. There are well-established multiple-scattering formulations based on classical electromagnetic theories. An example is the Generalized Multi-particle Mie-solution (GMM), which has recently been extended to a special version ̶ the GMM-PA approach, applicable to finite periodic arrays consisting of a huge number (e.g., >>106) of identical scattering centers [1]. The framework of the GMM-PA is nearly complete. When the size of the constituent unit scatterers becomes considerably small in comparison with incident wavelength, an appropriate array of such small element volumes may well be a satisfactory representation of a material entity having an arbitrary structure. X-ray diffraction is a powerful characterization tool used in a variety of scientific and technical fields, including material science. A diffraction pattern is nothing more than the spatial distribution of scattered intensity, determined by the distribution of scattering matter by way of its Fourier transform [1]. Since all linear dimensions entered into Maxwell's equations are normalized by wavelength, an analogy exists between optical and X-ray diffraction patterns. A large set of optical diffraction patterns experimentally obtained can be found in the literature [e.g., 2,3]. Theoretical results from the GMM-PA have been scrutinized using a large collection of publically accessible, experimentally obtained Fraunhofer diffraction patterns. As far as characteristic structures of the patterns are concerned, theoretical and experimental results are in uniform agreement; no exception has been found so far. Closely connected with the spatial distribution of scattered intensities are cross sections, such as for extinction, scattering, absorption, and radiation pressure, as a critical type of key quantity addressed in most theoretical and experimental studies of radiative scattering. Cross sections predicted from different scattering theories are supposed to be in general agreement. For objects of irregular shape, the GMM-PA solutions can be compared with the highly flexible Discrete Dipole Approximation (DDA) [4,5] when dividing a target to no more than ~106 unit cells. Also, there are different ways to calculate the cross sections in the GMM-PA, providing an additional means to examine the accuracy of the numerical solutions and to unveil potential issues concerning the theoretical formulations and numerical aspects. To solve multiple scattering by an assembly of material volumes through classical theories such as the GMM-PA, the radiative properties of the component scatterers, the complex refractive index in particular, must be provided as input parameters. When using a PA to characterize a material body, this involves the use of an adequate theoretical tool, an effective medium theory, to connect Maxwell's phenomenogical theory with the atomistic theory of matter. In the atomic theory, one regards matter as composed of interacting particles (atoms and molecules) embedded in the vacuum [6]. However, the radiative properties of atomic-scaled particles are known to be substantially different from bulk materials. Intensive research efforts in the fields of cluster science and nanoscience attempt to bridge the gap between bulk and atom and to understand the transition from classical to quantum physics. The GMM-PA calculations, which place virtually no restriction on the component-particle size, might help to gain certain insight into the transition.

Xu, Yu-Lin↗

Nanostructure Diffraction Gratings for Integrated Spectroscopy and Sensing

The present disclosure pertains to metal or dielectric nanostructures of the subwavelength scale within the grating lines of optical diffraction gratings. The nanostructures have surface plasmon resonances or non-plasmon optical resonances. A linear photodetector array is used to capture the resonance spectra from one of the diffraction orders. The combined nanostructure super-grating and photodetector array eliminates the use of external optical spectrometers for measuring surface plasmon or optical resonance frequency shift caused by the presence of chemical and biological agents. The nanostructure super-gratings can be used for building integrated surface enhanced Raman scattering (SERS) spectrometers. The nanostructures within the diffraction grating lines enhance Raman scattering signal light while the diffraction grating pattern of the nanostructures diffracts Raman scattering light to different directions of propagation according to their wavelengths. Therefore, the nanostructure super-gratings allows for the use of a photodetector array to capture the surface enhanced Raman scattering spectra.

Guo, Junpeng↗

Evaluation of X-Ray Reflectors by Optical Diffraction Patterns

Performance of X-ray reflectors affects that of X-ray mirrors. Modern X-ray mirrors have thousands of reflectors to gain large effective area. Evaluation of the reflectors is an important process in production of the mirrors. A diffraction pattern dominates reflector image when the parallel optical beam illuminates the reflector along its optical axis because the reflectors are used at grazing incident angles of around 1 deg and their effective width are 1–10 mm. A diffraction pattern from the entire reflector surface can be acquired at once with the aid of a lens. The diffraction pattern holds information of the surface profiles of the reflectors. To quantitatively evaluate the reflectors with the diffraction pattern, we created a diffraction pattern model by the wave optics with the ideal surface profile and fitted it to data. As a result, a correlation between fitting residual and the normal vector distribution of the surface profile was found. With our method, the reflectors can be evaluated and sorted out more efficiently.

Hayashi, Takayuki↗

Diffraction of waves by a perfect electromagnetic conductor half-plane between isorefractive media

In this study, diffraction of waves by a perfectly electromagnetic conductor half-plane which is lying at the boundary of isorefractive media is investigated. The diffracted field expressions are constructed by using the relation between scattered geometrical optics fields and the transition boundaries. The high frequency asymptotic expressions of diffracted fields reach infinite magnitude values at the transition boundaries. The uniform expressions of fields are obtained by using the uniform theory of diffraction method in order to obtain the finite magnitude values at the transition boundaries and the results are analyzed numerically for different set of parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies

In this work, an experimental platform for multiscale studies of materials subjected to plane stress loads is presented. Specifically, a planar biaxial mechanical load frame with four independent hydraulic actuators capable of applying arbitrary loading paths and ratios of tension and compression was designed and built for in situ diffraction experimentation. The load frame is integrated for use at the Argonne National Laboratory Advanced Photon Source (APS) synchrotron, Sector 1, 1-ID-E endstation and the Los Alamos Neutron Science Center (LANSCE) spallation neutron source, Spectrometer for Materials Research at Temperature and Stress (SMARTS) instrument. Cruciform specimen geometries were designed to experience loading ratios in the gauges commensurate with those applied at the grips, and to minimize interference with diffracted X-rays and neutrons. The finite element models used to design the cruciform specimen geometries were experimentally validated using stereo digital image correlation measurements. This complete planar biaxial in situ diffraction platform provides a new capability for studying multiaxial micromechanics of crystalline materials (e.g., elastic, slip, twinning, phase transformation) and their dependencies on grain size, location, texture, and neighborhood characteristics. The coupling with far-field high energy diffraction microscopy (ff-HEDM) for grain-by-grain measurements provides an additional benefit; provided crystal elastic constants of a material are known, it enables the direct measurement of local and average stress tensors in the gauge sections of cruciform specimens, resolving a long outstanding challenge of planar biaxial mechanical testing.

36 MATERIALS SCIENCE↗

Fatigue-induced Reversible/Irreversible Structural-transformation Study of a Ni-based Superalloy Using Combined In-situ Neutron-Diffraction and Thermal Approaches

Cyclic loading and the subsequent fatigue damage have been investigated with the in-situ neutron-diffraction and thermal characterization for a single-phase, polycrystal nickel-based alloy. The lattice-strain evolution is compared with the bulk parameters, such as the applied stress and the thermal response as a function of the fatigue cycles. The in-situ neutron-diffraction and thermal-evolution results identify the development of the five fatigue-damage stages. Fatigue damage is observed with bulk hardening, softening, and eventual saturation evident in both the diffraction patterns and the thermal-evolution features. An increase in the dislocation density and the formation of the patterned-dislocation structure are responsible for hardening within the early cycles. With further cyclic loading, the rearrangements of the dislocations result in the cyclic softening. The transition to saturation cycles is characterized by the anisotropy of the lattice strain evolution. The nonmonotonic thermal response and the irreversible anisotropy of the lattice-strain evolution are observed in the final saturation fatigue cycles. The fatigue-damage microstructure and dislocation-substructure evolution are studied with diffraction-profile analyses and complemented by the transmission-electron microscopy. The fluctuations of the differential dislocation density and size of the patterned substructure along with the in-situ thermal measurements reveal a second-order-kind structural transition and indicate the development of the irreversible fatigue-induced microstructure.

36 MATERIALS SCIENCE↗

The hydrothermal decomposition of calcium monosulfoaluminate 14-hydrate to katoite hydrogarnet and beta-anhydrite: An in-situ synchrotron X-ray diffraction study

We apply in-situ synchrotron X-ray diffraction to study the transformation of calcium monosulfoaluminate 14-hydrate Ca{sub 4}Al{sub 2}O{sub 6}(SO{sub 4}).14H{sub 2}O [monosulfate-14] to hydrogarnet Ca{sub 3}Al{sub 2}(OH){sub 12} on the saturated water vapor pressure curve up to 250 deg. C. We use an aqueous slurry of synthetic ettringite Ca{sub 6}Al{sub 2}(SO{sub 4}){sub 3}(OH){sub 12}.26H{sub 2}O as the starting material; on heating, this decomposes at about 115 deg. C to form monosulfate-14 and bassanite CaSO{sub 4}.0.5H{sub 2}O. Above 170 deg. C monosulfate-14 diffraction peaks slowly diminish in intensity, perhaps as a result of loss of crystallinity and the formation of an X-ray amorphous meta-monosulfate. Hydrogarnet nucleates only at temperatures above 210 deg. C. Bassanite transforms to beta-anhydrite (insoluble anhydrite) at about 230 deg. C and this transformation is accompanied by a second burst of hydrogarnet growth. The transformation pathway is more complex than previously thought. The mapping of the transformation pathway shows the value of rapid in-situ time-resolved synchrotron diffraction. - Graphical abstract: We use in-situ synchrotron diffraction to observe the decomposition of layer compound calcium monosulfoaluminate 14-hydrate (left) to form hydrogarnet (right)and beta-anhydrite under hydrothermal conditions.

36 MATERIALS SCIENCE↗

Neutron diffraction studies of Gd{sub 2}Zr{sub 2}O{sub 7} pyrochlore

The structure of Gd{sub 2}Zr{sub 2}O{sub 7} pyrochlore over the temperature range 4-300 K has been refined from powder neutron diffraction data. The sample was enriched in {sup 160}Gd to avoid the high neutron absorption of naturally occurring Gd. The diffraction pattern showed well resolved superlattice reflections indicative of the pyrochlore structure and no evidence is found for anion-disorder from the structural refinements. - Graphical abstract: Gd{sub 2}Zr{sub 2}O{sub 7} enriched in {sup 160}Gd prepared. Neutron diffraction reveals ordering of the anions. Precise structure established. Highlights: > A sample of Gd{sub 2}Zr{sub 2}O{sub 7} was prepared using {sup 160}Gd. > Precise structure established from 4 to 300 K using powder neutron diffraction. > No evidence for disorder of the oxygen anions is found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single crystalline and rare earth substituted La{sub 2}RuO{sub 5} investigated by x-ray diffraction and EXAFS spectroscopy

Single crystals of La{sub 2}RuO{sub 5} were obtained from a BaCl{sub 2} flux. The structure was determined by single crystal x-ray diffraction and compared to earlier x-ray and neutron powder diffraction results. The local structures of Ru and La/Ln in pure La{sub 2}RuO{sub 5} and the rare earth substituted La{sub 2-x}Ln{sub x}RuO{sub 5} (Ln=Pr, Nd, Sm, Gd, Dy) polycrystalline samples were determined from the extended x-ray absorption fine structures (EXAFS) of the K- and L{sub III}-edges of Ru, La, and Ln, respectively. A four shell model was developed to reduce the number of refinable parameters in the fit of the EXAFS spectra. The distribution of the Ln-ions in the layered crystal structure was determined by a comparison of the coordination spheres obtained from the Ln-edges with the unsubstituted La{sub 2}RuO{sub 5}. Interatomic distances were compared to the values obtained from the single crystal diffraction and were found to agree very well. - Graphical abstract: The crystal structure of La{sub 2-x}Ln{sub x}RuO{sub 5} (Ln=Pr, Nd, Sm, Gd, Dy) is shown viewed along the c-axis. The alternating stacking of LaRuO{sub 4} and LnO layers leads to the formation of zig-zag layers of corner sharing RuO{sub 6} octahedra. The La sites in the LaRuO{sub 4} layers are represented by light blue spheres, while the La/Ln sites in the LnO layers are colored dark blue. EXAFS investigations reveal a cationic ordering with roughly 65% of the substituting Ln ions occupying the LnO layers. Highlights: Black-Right-Pointing-Pointer Structure determination of La{sub 2}RuO{sub 5} by single crystal x-ray diffraction. Black-Right-Pointing-Pointer Ru-K EXAFS investigations of La{sub 2-x}Ln{sub x}RuO{sub 5} powder samples. Black-Right-Pointing-Pointer EXAFS of La and Ln in La{sub 2-x}Ln{sub x}RuO{sub 5} powder samples using K- and L{sub III}-absorption edges. Black-Right-Pointing-Pointer Good agreement of EXAFS results and crystal structure data despite low symmetry space group. Black-Right-Pointing-Pointer Observed partial cationic ordering of the inserted Ln on the two La sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure resolution by electron diffraction tomography of the complex layered iron-rich Fe-2234-type Sr{sub 5}Fe{sub 6}O{sub 15.4}

The crystal structure of the strontium ferrite Sr{sub 5}Fe{sub 6}O{sub 15.4}, was solved by direct methods on electron diffraction tomography data acquired on a transmission electron microscope. The refined cell parameters are a=27.4047(3) Å, b=5.48590(7) Å and c=42.7442(4) Å in Fm2m symmetry. Its structure is built up from the intergrowth sequence between a quadruple perovskite-type layer with a complex rock-salt (RS)-type block. In the latter iron atoms are found in two different environments : tetragonal pyramid and tetrahedron. The structural model was refined by Rietveld method based on the powder X-ray diffraction pattern. - Highlights: • Complex structure of Sr{sub 5}Fe{sub 6}O{sub 15.4} solved by electron diffraction tomography. • Observed Fourier maps allow determining missing oxygen atoms in the structure. • Structural model refined from powder X-ray diffraction data. • Intergrowth between quadruple perovskite layer with double rock-salt-type layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray diffraction from intact tau aggregates in human brain tissue

We describe an instrument to record X-ray diffraction patterns from diseased regions of human brain tissue by combining an in-line visible light fluorescence microscope with an X-ray diffraction microprobe. We use thiazine red fluorescence to specifically label and detect the filamentous tau protein pathology associated with Pick's disease, as several laboratories have done previously. We demonstrate that thiazine red-enhanced regions within the tissue show periodic structure in X-ray diffraction, which is not observed in healthy tissue. One observed periodicity (4.2 {angstrom}) is characteristic of cross-beta sheet structure, consistent with previous results from powder diffraction studies performed on purified, dried tau protein.

59 BASIC BIOLOGICAL SCIENCES↗

Multibeam Electron Diffraction

One of the primary uses for transmission electron microscopy (TEM) is to measure diffraction pattern images in order to determine a crystal structure and orientation. In nanobeam electron diffraction (NBED), we scan a moderately converged electron probe over the sample to acquire thousands or even millions of sequential diffraction images, a technique that is especially appropriate for polycrystalline samples. However, due to the large Ewald sphere of TEM, excitation of Bragg peaks can be extremely sensitive to sample tilt, varying strongly for even a few degrees of sample tilt for crystalline samples. In this paper, we present multibeam electron diffraction (MBED), where multiple probe-forming apertures are used to create multiple scanning transmission electron microscopy (STEM) probes, all of which interact with the sample simultaneously. We detail designs for MBED experiments, and a method for using a focused ion beam to produce MBED apertures. We show the efficacy of the MBED technique for crystalline orientation mapping using both simulations and proof-of-principle experiments. We also show how the angular information in MBED can be used to perform 3D tomographic reconstruction of samples without needing to tilt or scan the sample multiple times. Finally, we also discuss future opportunities for the MBED method.

47 OTHER INSTRUMENTATION↗

Necessary Experimental Conditions for Single-Shot Diffraction Imaging of DNA-Based Structures with X-ray Free-Electron Lasers

It has been proposed that the radiation damage to biological particles and soft condensed matter can be overcome by ultrafast and ultraintense X-ray free-electron lasers (FELs) with short pulse durations. The successful demonstration of the “diffraction-before-destruction” concept has made single-shot diffraction imaging a promising tool to achieve high resolutions under the native states of samples. However, the resolution is still limited because of the low signal-to-noise ratio, especially for biological specimens such as cells, viruses, and macromolecular particles. Here, we present a demonstration single-shot diffraction imaging experiment of DNA-based structures at SPring-8 Angstrom Compact Free Electron Laser (SACLA), Japan. Through quantitative analysis of the reconstructed images, the scattering abilities of gold and DNA were demonstrated. Suggestions for extracting valid DNA signals from noisy diffraction patterns were also explained and outlined. To sketch out the necessary experimental conditions for the 3D imaging of DNA origami or DNA macromolecular particles, we carried out numerical simulations with practical detector noise and experimental geometry using the Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory, USA. In conclusion, the simulated results demonstrate that it is possible to capture images of DNA-based structures at high resolutions with the technique development of current and next-generation X-ray FEL facilities.

59 BASIC BIOLOGICAL SCIENCES↗

X-ray diffraction study of nanocrystalline and amorphous structure within major and minor ampullate dragline spider silks

Synchrotron X-ray micro-diffraction experiments were carried out on Nephila clavipes (NC) and Argiope aurantia (AA) major (MA) and minor ampullate (MiA) fibers that make up dragline spider silk. The diffraction patterns show a semi-crystalline structure with {beta}-poly(L-alanine) nanocrystallites embedded in a partially oriented amorphous matrix. A superlattice reflection 'S' diffraction ring is observed, which corresponds to a crystalline component larger in size and is poorly oriented, when compared to the {beta}-poly(L-alanine) nanocrystallites that are commonly observed in dragline spider silks. Crystallite size, crystallinity and orientation about the fiber axis have been determined from the wide-angle X-ray diffraction (WAXD) patterns. In both NC and AA, the MiA silks are found to be more highly crystalline, when compared with the corresponding MA silks. Detailed analysis on the amorphous matrix shows considerable differences in the degree of order of the oriented amorphous component between the different silks studied and may play a crucial role in determining the mechanical properties of the silks.

36 MATERIALS SCIENCE↗

Azimuthal reflection high-energy electron diffraction study of MnAs growth on GaAs(001) by molecular beam epitaxy

Azimuthal reflection high-energy electron diffraction (ARHEED) and in situ grazing incidence synchrotron x-ray diffraction techniques are employed to investigate the growth, epitaxial orientation, and interfacial structure of MnAs layers grown on GaAs(001) by molecular beam epitaxy (MBE). We demonstrate the power and reliability of ARHEED scans as a routine tool in characterizing the formation of epitaxial films. The ARHEED scans clearly reveal the formation of the rectangular MnAs unit cell during growth on GaAs(001) for a MnAs layer thickness of 2.1 {+-} 0.2 monolayers with a tensile strain along the MnAs[1120] direction. A periodic coincidence site lattice, which is known to form along the MnAs [0001] direction to release the strain due to the huge lattice mismatch ({approx}30%) also produces periodic satellites of the diffraction spots in the ARHEED scan. The formation of different epitaxial orientations of MnAs during MBE growth can be directly observed using ARHEED scans. ARHEED is demonstrated to have a resolution similar to synchrotron x-ray diffraction with a double crystal monochromator, yielding full width at half maximum values of reflections as small as 0.005 reciprocal lattice units.

36 MATERIALS SCIENCE↗

Oxygen-diffusion limited metal combustions in Zr, Ti, and Fe foils: Time- and angle-resolved x-ray diffraction studies

The transient phase and chemical transformations of diffusion controlled metal combustions in bulk Zr, Ti, and Fe foils have been investigated, in situ, using novel time- and angle-resolved x-ray diffraction (TARXD). The TARXD employs monochromatic synchrotron x-rays and a fast-rotating diffracted beam chopper resolving the diffraction image temporally in time-resolution of {approx}45 {mu}s along the azimuth on a 2D pixel array detector. The metal foil strips (10-25 {mu}m in thickness) are ignited using a pulsed electrical heating with a typical heating rate of {approx}10{sup 6} K/s. The x-ray results indicate that the combustion occurs in molten metals, producing a wide range of stoichiometric solid oxides. It reflects an enhanced oxygen solubility and mobility of molten metals with respect to those of solid metals. However, the initial oxides formed are mainly oxygen-deficient metal oxides of ZrO, TiO, and FeO/Fe{sub 3}O{sub 4} - the lowest suboxides stable at these high temperatures. These transition metal monoxides further react with unreacted molten metals, yielding the secondary products of Zr{sub 3}O, Ti{sub 3}O, and Ti{sub 2}O - but not in FeO/Fe{sub 3}O{sub 4}. On the other hand, the higher stoichiometric oxides of ZrO{sub 2} and TiO{sub 2} are formed in the later time only on the metal surface. These results clearly indicate that the combustion process of metal strips is diffusion limited and strongly depends on the solubility and diffusivity of oxygen into molten metals. The time-resolved diffraction data reveals no evidence for metal oxidation in solids, but a series of temperature-induced polymorphic phase transitions. The dynamic thermal expansibility of Fe measured in the present fast heating experiments is similar to those in static conditions (3.3*10{sup -5}/K vs 3.5*10{sup -5}/K for {alpha}-Fe and 6.5*10{sup -5}/K versus 7.0*10{sup -5}/K for {gamma}-Fe).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗