Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Measurement of an inverse Compton scattering source local spectrum using k-edge filters

X-ray sources based on the inverse Compton scattering process are attracting a growing interest among scientists, due to their extremely fast pulse, quasi-monochromatic spectrum, and relatively high intensity. The energy spectrum of the x-ray beam produced by inverse Compton scattering sources in a fixed observation direction is a quasi-monochromatic approximately Gaussian distribution. The mean value of this distribution varies with the scattering polar angle between the electron beam direction and the x-ray beam observation direction. Previous works reported experimental measurements of the mean energy as a function of the polar angle. This work introduces a method for the measurement of the whole local energy spectrum (i.e., the spectrum in a fixed observation direction) of the x-ray beam yielded by inverse Compton scattering sources, based on a k-edge filtering technique.

07 ISOTOPE AND RADIATION SOURCES↗

High multi-photon visible upconversion emissions of Er{sup 3+} singly doped BiOCl microcrystals: A photon avalanche of Er{sup 3+} induced by 980 nm excitation

Under 980 nm excitation, high multi-photon upconversion (UC) emission from the {sup 2}H{sub 11/2}/{sup 4}S{sub 3/2} (green) and {sup 4}F{sub 9/2} (red) levels of Er{sup 3+} ions were observed from Er{sup 3+} singly doped BiOCl microcrystals. These high-energy excited states were populated by a three to ten photon UC process conditionally, which depended on the pump power density and the Er{sup 3+} ion doping concentration, characterizing as a hetero-looping enhanced energy transfer avalanche UC process. UC emission lifetime and Raman analysis suggest that the unusual UC phenomena are initiated by the new and intense phonon vibration modes of BiOCl lattices due to Er{sup 3+} ions doping.

36 MATERIALS SCIENCE↗

Controlling two plasmon decay instability in intense femtosecond laser driven plasmas

We investigate the onset of the two-plasmon-decay (TPD) instability in intense femtosecond laser-solid interaction. In particular, this instability, originating at the quarter critical electron density surface in the inhomogeneous plasma, is explored for a wide range of laser parameters-energy, pulse duration, and intensity contrast. By varying these laser parameters, we demonstrate ways to excite and control the growth of the TPD process. The pulse duration scan carried out under a constant laser fluence reveals the pulse width dependent nature of TPD growth. The spectral splitting of the TPD induced three-halves harmonic emission is used to infer the electron temperature near the quarter critical density surface. Moreover, by varying the laser contrast over four orders of magnitude, we find that the intensity threshold of three-halves harmonic emission increases by nearly two orders of magnitude. This contrast dependent intensity threshold for the emission of three-halves harmonic can be a useful diagnostic of the laser contrast.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence of the 2s2p({sup 1}P) doubly excited state in the harmonic generation spectrum of helium

By solving the two-active-electron time-dependent Schroedinger equation in an intense, ultrashort laser field, we investigate evidence of electron correlations in the high-order harmonic generation spectrum of helium. As the frequency of the driving laser pulse varies from 4.6 to 6.6 eV, the 13th, 11th, and 9th harmonics sequentially become resonant with the transition between the ground state and the isolated 2s2p({sup 1}P) autoionizing state of helium, which dramatically enhances these harmonics and changes their profiles. When each of the 9th and 13th harmonics are in resonance with this autoionizing state, there is also a low-order multiphoton resonance with a Rydberg state, resulting in a particularly large enhancement of these harmonics relative to neighboring harmonics. When the 11th harmonic is in resonance with the 2s2p({sup 1}P) autoionizing state, the 13th harmonic is simultaneously in resonance with numerous higher-energy autoionizing states, resulting in a competition between these two harmonics for intensity. These results demonstrate that even electron correlations occurring over a narrow energy interval can have a significant effect on strong-field processes such as harmonic generation.

74 ATOMIC AND MOLECULAR PHYSICS↗

SU-G-BRB-04: Automated Output Factor Measurements Using Continuous Data Logging for Linac Commissioning

Purpose: Linac commissioning is a time consuming and labor intensive process, the streamline of which is highly desirable. In particular, manual measurement of output factors for a variety of field sizes and energy greatly hinders the commissioning efficiency. In this study, automated measurement of output factors was demonstrated as ‘one-click’ using data logging of an electrometer. Methods: Beams to be measured were created in the recording and verifying (R&V) system and configured for continuous delivery. An electrometer with an automatic data logging feature enabled continuous data collection for all fields without human intervention. The electrometer saved data into a spreadsheet every 0.5 seconds. A Matlab program was developed to analyze the excel data to monitor and check the data quality. Results: For each photon energy, output factors were measured for five configurations, including open field and four wedges. Each configuration includes 72 fields sizes, ranging from 4×4 to 20×30 cm{sup 2}. Using automation, it took 50 minutes to complete the measurement of 72 field sizes, in contrast to 80 minutes when using the manual approach. The automation avoided the necessity of redundant Linac status checks between fields as in the manual approach. In fact, the only limiting factor in such automation is Linac overheating. The data collection beams in the R&V system are reusable, and the simplified process is less error-prone. In addition, our Matlab program extracted the output factors faithfully from data logging, and the discrepancy between the automatic and manual measurement is within ±0.3%. For two separate automated measurements 30 days apart, consistency check shows a discrepancy within ±1% for 6MV photon with a 60 degree wedge. Conclusion: Automated output factor measurements can save time by 40% when compared with conventional manual approach. This work laid ground for further improvement for the automation of Linac commissioning.

43 PARTICLE ACCELERATORS↗

Linking ecosystem scale vegetation change to shifts in carbon and water cycling: the consequences of widespread piñon mortality in the Southwest

The southwestern United States experienced an extended drought from 1999-2002 which led to widespread coniferous tree mortality. Piñon-juniper (PJ) woodlands, which occupy 24 million ha throughout the Southwest, were extremely vulnerable to this drought. An abrupt die-off of 40 to 95% of piñon pine (Pinus edulis) and 2-25% of juniper (Juniperus monosperma) across 1.5 million ha triggered rapid and extensive changes in the structure of PJ woodlands with potentially large, yet unknown, consequences for ecosystem services and feedbacks between the carbon cycle and climate system. Given the spatial extent of PJ woodlands (3rd largest biome in the US) and climatic predictions of increased frequency and intensity of drought in the region, it is crucial to understand the consequences of these disturbances on regional carbon and energy dynamics, biogeochemical processes and atmospheric CO2. The overall objective of our research was to quantify what impact widespread mortality of piñon trees has for carbon and water cycling in PJ woodlands. Our specific objectives for this proposal were: 1) Quantify the carbon, water and energy exchange trajectory after mortality in PJ woodlands; 2) Determine the mechanisms controlling the response and recovery of ecosystem production and respiration processes following large-scale piñon mortality; 3) Use the relationships we measure between ecosystem structure and function PJ woodlands recover from mortality to scale the results of our study up to the regional scale.

09 BIOMASS FUELS↗

Scaleable production and separation of fermentation-derived acetic acid. Final CRADA report.

Half of U.S. acetic acid production is used in manufacturing vinyl acetate monomer (VAM) and is economical only in very large production plants. Nearly 80% of the VAM is produced by methanol carbonylation, which requires high temperatures and exotic construction materials and is energy intensive. Fermentation-derived acetic acid production allows for small-scale production at low temperatures, significantly reducing the energy requirement of the process. The goal of the project is to develop a scaleable production and separation process for fermentation-derived acetic acid. Synthesis gas (syngas) will be fermented to acetic acid, and the fermentation broth will be continuously neutralized with ammonia. The acetic acid product will be recovered from the ammonium acid broth using vapor-based membrane separation technology. The process is summarized in Figure 1. The two technical challenges to success are selecting and developing (1) microbial strains that efficiently ferment syngas to acetic acid in high salt environments and (2) membranes that efficiently separate ammonia from the acetic acid/water mixture and are stable at high enough temperature to facilitate high thermal cracking of the ammonium acetate salt. Fermentation - Microbial strains were procured from a variety of public culture collections (Table 1). Strains were incubated and grown in the presence of the ammonium acetate product and the fastest growing cultures were selected and incubated at higher product concentrations. An example of the performance of a selected culture is shown in Figure 2. Separations - Several membranes were considered. Testing was performed on a new product line produced by Sulzer Chemtech (Germany). These are tubular ceramic membranes with weak acid functionality (see Figure 3). The following results were observed: (1) The membranes were relatively fragile in a laboratory setting; (2) Thermally stable {at} 130 C in hot organic acids; (3) Acetic acid rejection > 99%; and (4) Moderate ammonia flux. The advantages of producing acetic acid by fermentation include its appropriateness for small-scale production, lower cost feedstocks, low energy membrane-based purification, and lower temperature and pressure requirements. Potential energy savings of using fermentation are estimated to be approximately 14 trillion Btu by 2020 from a reduction in natural gas use. Decreased transportation needs with regional plants will eliminate approximately 200 million gallons of diesel consumption, for combined savings of 45 trillion Btu. If the fermentation process captures new acetic acid production, savings could include an additional 5 trillion Btu from production and 7 trillion Btu from transportation energy.

03 NATURAL GAS↗

Spatial and temporal variations of the fluxes of carbon dioxide and sensible and latent heat over the FIFE site

Airborne measurements of flux densities of carbon dioxide CO2, sensible heat, and latent heat (H2O) obtained over the First ISLSCP Field Experiment (FIFE) site during three intensive field campaigns in 1987 and one in 1989 are examined to characterize the spatial and temporal variations of CO2 and energy transfer processes. These data were collected by the National Research Council Twin Otter using low-level flight patterns, all flown at constant pressure altitude during relatively clear days. The spatial variations are larger in 1989 than in 1987 and a higher correlation is observed between the fluxes and the surface features. The temporal patterns are easier to characterize with the relatively homogeneous situation of 1987. Functional relationships obtained between fluxes of CO2 and latent heat, CO2 fluxes and greenness index, latent heat fluxes and greenness index, and between sensible heat fluxes and surface air temperature differences are presented for one day in 1987 and one in 1989 as an example of the kind of information that can be obtained from grid flights at constant pressure altitude.

Desjardins, R. L.↗

The participation of nuclei in type-III-related electron streams

We study 27 increases of the flux of 300-800 keV electrons on board HELIOS A or B, associated with intense type III radio bursts close to perihelion passages of the two spacecraft, during the solar minimum. Electrons can be detected inside cones with an angular width between 30 deg and 60 deg. Though only intense type III bursts are associated with recognizable electron events in space, such an association does not exist for all of them; this fact and great differences in fluxes of the individual events indicate that, apart from the intensity, also some other characteristic of the type III burst acceleration or propagation process determines the resulting flux of electrons in space; the energy spectrum of the accelerated electrons is one of the likely candidates. A comparison of the electron flux in these events with the flux of 1.7-3.7 MeV/nucl helium reveals very large variations of the helium/electron flux ratio, by a factor of at least 15 and possibly much higher. We demonstrate that these variations are not caused by propagation effects in interplanetary space. Therefore, they must be due either to propagation effects in the solar corona, or more likely, to intrinsic variations in the relative production of electrons and nuclei in the type III burst process. An extrapolation of the observed fluxes to 1 AU shows that in only 7 of the 27 electron events studied might a marginal greater than 1.7 MeV helium flux be recognized at the Earth distance.

Kallenrode, May-Britt↗

Polarized Electron - Polarized Deuteron Deep-Inelastic Scattering in Electron-Ion Collider with Tagging

For the past several years there have been an intensive research and development for the possible electron-ion collider that will be able to probe deep inelastic processes at unprecedentedly high energies in eA channel. One of the important advantages of the collider kinematics in DIS processes is the possibility for an unambiguous separation of hadrons emerging from DIS and hadrons fragmenting from the target nucleus. This creates a unique possibility for tagging the interacting nucleon with the recoil slow fragments in the DIS process. The situation is most clean for the deuteron target in which case the recoil particle is a nucleon. In addition, the possibility of having polarized deuteron beams will create unprecedented opportunities in probing polarization degrees of freedom for parton distributions in the interacting bound nucleon. In this work we develop a theoretical framework for the polarized electron-polarized deuteron deep inelastic scattering in which the recoil nucleon is detected in the target fragmentation region. Two main contributions for which theoretical models are developed are the plane-wave impulse approximation, in which no reinteractions are taking place between the final state products of DIS and the recoil nucleon.

Sargsian, Misak↗

Interpretation of the Si K{alpha} x-ray spectra accompanying the stopping of swift Ca ions in low-density SiO{sub 2} aerogel

This article presents a detailed analysis of the K{alpha} x-ray spectra of Si induced by 11.4 MeV/u Ca projectiles penetrating a low-density SiO{sub 2} aerogel target measured with high spectral and spatial resolution at the UNILAC accelerator at GSI-Darmstadt. The low-density material used in the experiment was crucial for the space-resolved studies of the Si x-ray radiation (for different energies of stopping Ca ions). The stopping length of the 11 MeV/u Ca ions reaches up to 10 mm in the low-density SiO{sub 2} aerogel, whereas in regular quartz solid targets it is about 100 times shorter. The analysis of the x-ray spectra emitted by the stopping medium has shown a high level of the L-shell ionization, especially in the later considered phase (E{sub p{approx}}5 MeV/u) of the stopping process. It has been further demonstrated that the population of the highly ionized states produced in the ion-atom collisions can be substantially reduced in the time between the collision and the x-ray emission due to the very intense rearrangement processes occurring in Si situated in the chemical environment of oxygen atoms. Moreover, comparison of the experimental values of the K{alpha} L-shell satellite energy shifts with the results of the multiconfiguration Dirac-Fock calculations allows us to find that Si valence electron configuration is enriched due to electron transfer from valence-electron-rich oxygen atoms into highly ionized silicon atoms. Our results indicate that the Coulomb explosion in a highly ionized track core is prevented by rapid neutralization in the femtosecond time scale.

74 ATOMIC AND MOLECULAR PHYSICS↗

Resonant Auger decay of the core-excited C{sup *}O molecule in intense x-ray laser fields

The dynamics of the resonant Auger (RA) process of the core-excited C*O(1s{sup -1}{pi}*,v{sub r}=0) molecule in an intense x-ray laser field is studied theoretically. The theoretical approach includes the analog of the conical intersections of the complex potential energy surfaces of the ground and 'dressed' resonant states due to intense x-ray pulses, taking into account the decay of the resonance and the direct photoionization of the ground state, both populating the same final ionic states coherently, as well as the direct photoionization of the resonance state itself. The light-induced nonadiabatic effect of the analog of the conical intersections of the resulting complex potential energy surfaces gives rise to strong coupling between the electronic, vibrational, and rotational degrees of freedom of the diatomic CO molecule. The interplay of the direct photoionization of the ground state and of the decay of the resonance increases dramatically with the field intensity. The coherent population of a final ionic state via both the direct photoionization and the resonant Auger decay channels induces strong interference effects with distinct patterns in the RA electron spectra. The individual impact of these physical processes on the total electron yield and on the CO{sup +}(A {sup 2}{Pi}) electron spectrum are demonstrated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy upconversion in holmium doped lead-germano-tellurite glass

Holmium doped lead-germano-tellurite glass was prepared by the melt quenching technique. The Judd-Ofelt intensity parameters were estimated as {Omega}{sub 2}=7.6x10{sup -20}, {Omega}{sub 4}=12.9x10{sup -20}, and {Omega}{sub 6}=2.5x10{sup -20} cm{sup 2}. Radiative transition probabilities and lifetimes were also determined for some of the levels. Room temperature upconversion emissions have been observed from Ho{sup 3+} at 497 nm under 532 nm laser excitation, and at 557 and 668 nm under 762 nm laser excitation. The upconversion emission mechanisms were found to be due to a step wise excitation process. Upconversion emission intensity enhanced in a heat treated glass.

36 MATERIALS SCIENCE↗

The Role of Convective Gustiness in Reducing Seasonal Precipitation Biases in the Tropical West Pacific

Abstract Precipitation is an important climate quantity that is critically relevant to society. In spite of intense efforts, significant precipitation biases remain in most climate models. One pervasive and persistent bias found in many general circulation models occurs in the Tropical West Pacific where northern hemisphere summer‐time precipitation is often underestimated compared to observations. Using the DOE‐E3SM model, the inclusion of a missing process, convective gustiness, is shown to reduce those biases through a net increase in surface evaporation. Gustiness in surface wind fields is assumed to arise empirically in proportion to the intensity of convective precipitation. The increased evaporation can be treated as an increase in the moist static energy forcing into the atmosphere. A Normalized Gross Moist Stability (NGMS) framework (which characterizes the relationship between convective forcing and convective response) is used to explore the processes responsible for the precipitation bias, and the impact of the gustiness parameterization in reducing that bias. Because the NGMS of the Tropical West Pacific is less than unity in the E3SMv1 model, the increase in energy forcing amplifies the increase in precipitation to exceed that of the evaporative flux. Convective gustiness favors increased precipitation in regions where the resolved surface winds are weak and convection is present.

54 ENVIRONMENTAL SCIENCES↗

Origin of 2.7 {mu}m luminescence and energy transfer process of Er{sup 3+}: {sup 4}I{sub 11/2}{yields}{sup 4}I{sub 13/2} transition in Er{sup 3+}/Yb{sup 3+} doped germanate glasses

An investigation of spectroscopic property and energy transfer process of Er{sup 3+} doped and Er{sup 3+}/Yb{sup 3+} co-doped germanate glasses is presented. The emission cross section of the {sup 4}I{sub 11/2}{yields}{sup 4}I{sub 13/2} transition of Er{sup 3+} doped germanate glass is calculated to be 1.2 x 10{sup -20} cm{sup 2}. The microparameter of energy transfer from Yb{sup 3+}:{sup 2} F{sub 5/2} to Er{sup 3+}:{sup 4}I{sub 11/2} is calculated to be 2.74 x 10{sup -39} cm{sup 6}/s, and that is not phonon dependent in the quasiresonant process. The intensity of the emission around 2.7 {mu}m is enhanced obviously when Er{sup 3+} co-doped with Yb{sup 3+}. The excited-state relaxation process of Er{sup 3+} is adequately described by a combination of the Judd-Ofelt model and the energy-gap law. With the exception of {sup 4}I{sub 13/2} and {sup 4}I{sub 11/2} levels, multiphonon relaxation is dominant for all excited states, making it possible to efficiently pump the 1.55 {mu}m {sup 4}I{sub 13/2}{yields}{sup 4}I{sub 15/2} and 2.7 {mu}m {sup 4}I{sub 13/2}{yields}{sup 4}I{sub 11/2} emission by excitation of Yb{sup 3+}:{sup 2}F{sub 5/2} and Er{sup 3+}:{sup 4}I{sub 11/2} at 980 nm.

36 MATERIALS SCIENCE↗

Describing Point Defect Topology in 2D Energy Materials Through Computer Vision

Point defects such as vacancies and impurity atoms strongly impact the performance of 2D materials. Traditional efforts often rely on manual detection, a process that is time-intensive, prone to human error, and challenging to scale. Here we leverage machine learning (ML) methods to identify and quantify vacancies within 2D transition metal carbides (Ti3C2, MXenes), aiming to expedite detection while improving accuracy. MXenes exhibit valuable defect-defined electrochemical properties, but we currently lack statistical understanding of defect topology needed to fully harness these materials. We employ a convolutional neural network for semantic segmentation of experimental MXene images, opening an opportunity to conduct a rigorous statistical study on defect hierarchy while investigating local relaxation in the lattice. We show how the integration of ML can yield fundamental insight into point defects, providing a powerful tool that will play an increasingly crucial role in the future of materials science.

2D materials↗

An Assessment of Global Ocean Thermal Energy Conversion Resources With a High-Resolution Ocean General Circulation Model

Global rates of ocean thermal energy conversion (OTEC) are assessed with a high-resolution (1 deg × 1 deg) ocean general circulation model (OGCM). In numerically intensive simulations, the OTEC process is represented by a pair of sinks and a source of specified strengths placed at selected water depths across the oceanic region favorable for OTEC. Results broadly confirm earlier estimates obtained with a coarse (4 deg × 4 deg) OGCM, but with the greater resolution and more elaborate description of key physical oceanic mechanisms in the present case, the massive deployment of OTEC systems appears to affect the global environment to a relatively greater extent. The maximum global OTEC power production drops to 14 TW, or about half of previously estimated levels, but it would be achieved with only one-third as many OTEC systems. Environmental effects at maximum OTEC power production are generally similar in both sets of simulations. The oceanic surface layer would cool down in tropical OTEC regions with a compensating warming trend elsewhere. Some heat would penetrate the ocean interior until the environment reaches a new steady state. A significant boost of the oceanic thermohaline circulation (THC) would occur. Although all simulations with given OTEC flow singularities were run for 1000 years to ensure stabilization of the system, convergence to a new equilibrium was generally achieved much faster, i.e., roughly within a century. Here, with more limited OTEC scenarios, a global OTEC power production of the order of 7 TW could still be achieved without much effect on ocean temperatures.

13 HYDRO ENERGY↗

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud-Resolving Model

The Goddard Cumulus Ensemble (GCE) model is used to examine the impact of various microphysical schemes, and vertical and horizontal resolution on the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing ratios of all water phases (vapor, liquid, and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes, and with surface processes. For idealized hurricane, an axisymmetric version of the GCE model was developed and used successfully to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was used to simulate squall lines that developed in the western Pacific, eastern Atlantic and central US. For the cloud ensemble, the GCE model was integrated for several days in order to have good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolution will be examined.

Tao, Wei-Kuo↗