Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERTILIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Impact of Boron Additions in Marginal Soils for Growth of Corn, Wheat, Soybean, and Switchgrass

Expansion of agricultural production in marginal or poor nutrient status soils would necessitate calibration of the various nutrients to support plant growth. Boron (B) is an important micronutrient required by plants for regulating many functions including seed and fruit development. Few studies have compared the effectiveness of different types (refined vs crushed ore) of B source on the growth of plants. We hypothesize that addition of refined granulated B fertilizer as well as granulated ores will increase plant available Ca and B in the marginal and sandy soils. A greenhouse experiment was carried out to mimic a poor soil condition, using potting media created by mixing 20 % potting mix and 80% sand. Nitrogen was applied at recommended rates. Pots were watered evenly throughout the growing season. Plant tissues were harvested, biomass recorded, dried and ground for analysis. There was no significant difference on biomass yield due to either rate or source. Here, the four B sources showed different rates of availability to corn, soybean, wheat and switchgrass. Highly soluble B source seems to be the effective among B sources. Etigran-21 was found to be toxic to soybean plants, most likely due to its high solubility.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of a low cost humate solution as an in situ amendment to enhance attenuation of uranium in an acidic plume - 15445

A single well injection test was conducted in the acidic portion of a groundwater contamination plume beneath the F-Area Seepage Basins on the U.S. Department of Energy's Savannah River Site to evaluate humate as a viable amendment to enhance attenuation of uranium and other radionuclides. Humate is typically used as an inexpensive organic fertilizer. A solution of humate was injected into a monitoring well in the heart of the F-Area Seepage Basins plume. The geochemical conceptual model suggests humate adsorbs to mineral surfaces creating a subsurface treatment zone in which uranium adsorption is enhanced. Following humate injection, groundwater was sampled from the injection well at regular intervals to determine the composition of groundwater and to evaluate the sorption of contaminants within the treatment zone. Attenuation of uranium, radioiodine and Strontium-90 was determined by comparing concentrations to analytes unaffected by the humate, specifically tritium, nitrate, and specific conductance. The post-injection monitoring data showed enhanced uranium attenuation in the treatment zone as uranium concentrations rebounded to only 68% of the pre-test concentrations. Radioiodine attenuation was complicated by changing speciation during the test. When pH was elevated by the humate injection, iodate dominated and enhanced attenuation was observed. As pH decreased, iodide dominated and enhanced attenuation decreased. Humate did not significantly attenuate Strontium-90. Results of the humate injection test demonstrate that humate strongly adsorbs to the aquifer sediments at acidic pH. Humate desorption curves suggest that a substantial fraction of humate will remain adsorbed to the sediments for long-periods of time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranium mining and norm, a North American perspective - 15545

All soils and rocks contain naturally occurring radioactive materials (NORM). Many ores and raw materials contain relatively elevated levels of natural radionuclides and processing such materials can further increase the concentrations of natural radionuclides, sometimes referred to as technologically enhanced naturally occurring radioactive materials (TENORM). Examples of NORM minerals include uranium ores, monazite (a source of rare earth minerals), and phosphate rock used to produce phosphate fertilizer. Such activities have the potential to result in above background radiation exposure to workers and the public. Following a brief review of the sources and exposure from NORM in these varied industries, this paper will then present an overview of uranium mining and recovery in North America including discussion on the methods currently being used, production of NORM materials and wastes associated with these uranium recovery methods and the radiological composition of the NORM wastes produced by uranium recovery. The paper includes descriptions of the methods and associated NORM produced by both conventional (underground, open pit) and in situ recovery (ISR) mining methods and identifies the responsible government agencies in the US and Canada assigned the authority to regulate and control these NORM materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Concentration, Temperature, and Interelectrode Gap on the Voltage Drop in an Electrochemical System of GdCl{sub 3}-LiCl-KCl

One of the most common conversations for those in the nuclear field and the public when discussing nuclear power is the issue of nuclear waste. When used nuclear fuel (UNF) is removed from a reactor, it contains fission products, some of which are long lived isotopes that will continue to irradiate for hundreds of years. One of several solutions to this issue is reprocessing, a process where minor actinides and other fission products are separated from still fissile and fertile materials. In the United States, there is no reprocessing of UNF at an industrial scale; however, one of the methods that universities and national labs are currently researching is known as pyro-processing. Pyro-processing utilizes electrochemistry in a molten salt environment to treat UNF and remove uranium and plutonium. The heart of the pyro-processing system is an electrorefining process, where most of the U in the UNF is selectively collected on a solid cathode in molten lithium-potassium chloride (LiCl-KCl) at high temperatures (723 K - 773 K). To model the behavior of materials in the electro-refiner, small bench-scale electrochemical experiments are being performed at many research universities and national labs to better understand material behavior. Within the electrochemical cell, there is a small resistance to current between the cathode and anode. This results in a voltage drop, which can affect the results of the experiments. This voltage drop varies based upon concentration of the salt, the temperature, the distance between the anode and cathode, and the scan rate. For this study, cyclic voltammetry will be performed on GdCl{sub 3}-LiCl-KCl at various temperatures (723 K - 798 K), various sample concentrations (1, 5, and 10 wt%), various scan rates (50, 100, 200, and 300 mV/s), and two different electrode spacing configurations. The resulting cyclic voltammograms will be compared for both electrode configurations to see the impact of interelectrode gap on the voltage drop.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Feasibility of a Breed-and-Burn Molten Salt Reactor

This work addresses the feasibility and characteristics of the breed and burn (B and B) cycle for Molten Salt Reactors. In the general B and B cycle, natural Uranium or Thorium is used as fuel for a reactor which breeds a sufficient amount to maintain criticality at equilibrium without reprocessing. Interest in applying this scheme to an MSR has developed recently For the MSR B and B scheme considered here, fresh salt containing fertile material is continually fed into the core while salt with the composition of the homogeneous fuel is expelled without reprocessing. Through an analysis of the equilibrium conditions and startup requirements, the feasibility of such a cycle operating with various salts is assessed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Increased influence of nitrogen limitation on CO 2 emissions from future land use and land use change

Abstract In the latest projections of future greenhouse gas emissions for the Intergovernmental Panel on Climate Change (IPCC), few Earth System Models included the effect of nitrogen limitation, a key process limiting forest regrowth. Few included forest management (wood harvest). We estimate the impacts of nitrogen limitation on the CO 2 emissions from land use and land use change (LULUC), including wood harvest, for the period 1900–2100. We use a land surface model that includes a fully coupled carbon and nitrogen cycle and accounts for forest regrowth processes following agricultural abandonment and wood harvest. Future projections are based on the four Representation Concentration Pathways used in the IPCC Fifth Assessment Report, and we account for uncertainty in future climate for each scenario based on ensembles of climate model outputs. Results show that excluding nitrogen limitation will underestimate global LULUC emissions by 34–52 PgC (20–30%) during the 20th century (range across three different historical LULUC reconstructions) and by 128–187 PgC (90–150%) during the 21st century (range across the four IPCC scenarios). The full range for estimated LULUC emissions during the 21st century including climate model uncertainty is 91 to 227 PgC (with nitrogen limitation included). The underestimation increases with time because (1) projected annual wood harvest rates from forests summed over the 21st century are 380–1080% higher compared to those of the 20th century, resulting in more regrowing secondary forests; (2) nitrogen limitation reduces the CO 2 fertilization effect on net primary production of regrowing secondary forests following wood harvest and agricultural abandonment; and (3) nitrogen limitation effect is aggravated by the gradual loss of soil nitrogen from LULUC disturbance. Our study implies that (1) nitrogen limitation of CO 2 uptake is substantial and sensitive to nitrogen inputs; (2) if LULUC emissions are larger than previously estimated in studies without nitrogen limitation, then meeting the same climate mitigation target would require an equivalent additional reduction of fossil fuel emissions; (3) the effectiveness of land‐based mitigation strategies will critically depend on the interactions between nutrient limitations and secondary forests resulting from LULUC; and (4) it is important for terrestrial biosphere models to consider nitrogen constraint in estimates of the strength of future land carbon uptake.

Meiyappan, Prasanth↗

Representing leaf and root physiological traits in CLM improves global carbon and nitrogen cycling predictions

In many ecosystems, nitrogen is the most limiting nutrient for plant growth and productivity. However, current Earth System Models (ESMs) do not mechanistically represent functional nitrogen allocation for photosynthesis or the linkage between nitrogen uptake and root traits. The current version of CLM (4.5) links nitrogen availability and plant productivity via (1) an instantaneous downregulation of potential photosynthesis rates based on soil mineral nitrogen availability, and (2) apportionment of soil nitrogen between plants and competing nitrogen consumers assumed to be proportional to their relative N demands. However, plants do not photosynthesize at potential rates and then downregulate; instead photosynthesis rates are governed by nitrogen that has been allocated to the physiological processes underpinning photosynthesis. Furthermore, the role of plant roots in nutrient acquisition has also been largely ignored in ESMs. We therefore present a new plant nitrogen model for CLM4.5 with (1) improved representations of linkages between leaf nitrogen and plant productivity based on observed relationships in a global plant trait database and (2) plant nitrogen uptake based on root-scale Michaelis-Menten uptake kinetics. Our model improvements led to a global bias reduction in GPP, LAI, and biomass of 70%, 11%, and 49%, respectively. Furthermore, water use efficiency predictions were improved conceptually, qualitatively, and in magnitude. The new model's GPP responses to nitrogen deposition, CO 2 fertilization, and climate also differed from the baseline model. The mechanistic representation of leaf-level nitrogen allocation and a theoretically consistent treatment of competition with belowground consumers led to overall improvements in global carbon cycling predictions.

54 ENVIRONMENTAL SCIENCES↗

Ecohydrological modeling in agroecosystems: Examples and challenges

We report that human societies are increasingly altering the water and biogeochemical cycles to both improve ecosystem productivity and reduce risks associated with the unpredictable variability of climatic drivers. These alterations, however, often cause large negative environmental consequences, raising the question as to how societies can ensure a sustainable use of natural resources for the future. Here we discuss how ecohydrological modeling may address these broad questions with special attention to agroecosystems. The challenges related to modeling the two-way interaction between society and environment are illustrated by means of a dynamical model in which soil and water quality supports the growth of human society but is also degraded by excessive pressure, leading to critical transitions and sustained societal growth-collapse cycles. We then focus on the coupled dynamics of soil water and solutes (nutrients or contaminants), emphasizing the modeling challenges, presented by the strong nonlinearities in the soil and plant system and the unpredictable hydroclimatic forcing, that need to be overcome to quantitatively analyze problems of soil water sustainability in both natural and agricultural ecosystems. Finally, we discuss applications of this framework to problems of irrigation, soil salinization, and fertilization and emphasize how optimal solutions for large-scale, long-term planning of soil and water resources in agroecosystems under uncertainty could be provided by methods from stochastic control, informed by physically and mathematically sound descriptions of ecohydrological and biogeochemical interactions.

54 ENVIRONMENTAL SCIENCES↗

Is current irrigation sustainable in the United States? An integrated assessment of climate change impact on water resources and irrigated crop yields

While climate change impacts on crop yields has been extensively studied, estimating the impact of water shortages on irrigated crop yields is challenging because the water resources management system is complex. To investigate this issue, we integrate a crop yield reduction module and a water resources model into the MIT Integrated Global System Modeling framework, an integrated assessment model linking a global economic model to an Earth system model. We assess the effects of climate and socioeconomic changes on water availability for irrigation in the U.S. as well as subsequent impacts on crop yields by 2050, while accounting for climate change projection uncertainty. We find that climate and socioeconomic changes will increase water shortages and strongly reduce irrigated yields for specific crops (i.e., cotton and forage), or in specific regions (i.e., the Southwest) where irrigation is not sustainable. Crop modeling studies that do not represent changes in irrigation availability can thus be misleading. Yet, since the most water-stressed basins represent a relatively small share of U.S. irrigated areas, the overall reduction in U.S. crop yields is small. The response of crop yields to climate change and water stress also suggests that some level of adaptation will be feasible, like relocating croplands to regions with sustainable irrigation or switching to less irrigation intensive crops. Finally, additional simulations show that greenhouse gas (GHG) mitigation can alleviate the effect of water stress on irrigated crop yields, enough to offset the reduced CO 2 fertilization effect compared to an unconstrained GHG emission scenario.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Estimating Trends and Variation of Net Biome Productivity in India for 1980–2012 Using a Land Surface Model

In this paper we explore the trend in net biome productivity (NBP) over India for the period 1980–2012 and quantify the impact of different environmental factors, including atmospheric CO 2 concentrations ([CO 2 ]), land use and land cover change, climate, and nitrogen deposition on carbon fluxes using a land surface model, Integrated Science Assessment Model. Results show that terrestrial ecosystems of India have been a carbon sink for this period. Driven by a strong CO 2 fertilization effect, magnitude of NBP increased from 27.17 TgC/yr in the 1980s to 34.39 TgC/yr in the 1990s but decreased to 23.70 TgC/yr in the 2000s due to change in climate. Adoption of forest conservation, management, and reforestation policies in the past decade has promoted carbon sequestration in the ecosystems, but this effect has been offset by loss of carbon from ecosystems due to rising temperatures and decrease in precipitation.

54 ENVIRONMENTAL SCIENCES↗

Material Design Strategies for Recovery of Critical Resources from Water

Population growth, urbanization, and decarbonization efforts are collectively straining the supply of limited resources that are necessary to produce batteries, electronics, chemicals, fertilizers, and other important products. Securing the supply chains of these critical resources via the development of separation technologies for their recovery represents a major global challenge to ensure stability and security. Surface water, groundwater, and wastewater are emerging as potential new sources to bolster these supply chains. Recently, a variety of material-based technologies have been developed and employed for separations and resource recovery in water. Judicious selection and design of these materials to tune their properties for targeting specific solutes is central to realizing the potential of water as a source for critical resources. Here, the materials that are developed for membranes, sorbents, catalysts, electrodes, and interfacial solar steam generators that demonstrate promise for applications in critical resource recovery are reviewed. In addition, a critical perspective is offered on the grand challenges and key research directions that need to be addressed to improve their practical viability.

36 MATERIALS SCIENCE↗

Beyond Conventional Charge Density Wave for Strongly Enhanced 2D Superconductivity in 1H‐TaS 2 Superlattices

Noncentrosymmetric transition metal dichalcogenide (TMD) monolayers offer a fertile platform for exploring unconventional Ising superconductivity (SC) and charge density waves (CDWs). However, the vulnerability of isolated monolayers to structural disorder and environmental oxidation often degrade their electronic coherence. Herein, an alternative approach is reported for fabricating stable and intrinsic monolayers of 1H-TaS2 sandwiched between SnS blocks in a (SnS) 1.15 TaS 2 van der Waals (vdW) superlattice. The SnS block layers not only decouple individual 1H-TaS 2 sublayers to endow them with monolayer-like electronic characteristics, but also protect the 1H-TaS 2 layers from electronic degradation. The results reveal the characteristic 3 × 3 CDW order in 1H-TaS 2 sublayers associated with electronic rearrangement in the low-lying sulfur p band, which uncovers a previously undiscovered CDW mechanism rather than the conventional Fermi surface-related framework. Additionally, the (SnS) 1.15 TaS 2 superlattice exhibits a strongly enhanced Ising-like SC with a layer-independent T c of ≈3.0 K, comparable to that of the isolated monolayer 1H-TaS 2 sample, presumably attributed to their monolayer-like characteristics and retained Fermi states. These results provide new insights into the long-debated CDW order and enhanced SC of monolayer 1H-TaS 2 , establishing bulk vdW superlattices as promising platforms for investigating exotic collective quantum phases in the 2D limit.

2D superconductivity↗

Fully‐Printed Ion Sensor Arrays for Measuring Agricultural Nitrogen and Potassium Concentrations Using Nernstian and AI Models

Abstract The chemical composition of growing media is a key factor for plant growth, impacting agricultural yield and sustainability. However, there is a lack of affordable chemical sensors for ubiquitous nutrient ion monitoring in agricultural applications. This work investigates using fully printed ion‐sensor arrays to measure the concentrations of nitrate, ammonium, and potassium in mixed‐electrolyte media. Ion sensor arrays composed of nitrate, ammonium, and potassium ion‐selective electrodes and a printed silver‐silver chloride (Ag/AgCl) reference electrode are fabricated and characterized in aqueous solutions in a range of concentrations that encompass what is typical for agricultural growing media (0.01 m m –1 m ). The sensors are also tested in mixed‐electrolyte solutions of NaNO 3 , NH 4 Cl, and KCl of varying concentrations, and the recorded potentials are input into Nernstian and artificial neural network models to compare the prediction accuracy of the models against ground truth. The artificial neural network models demonstrated higher accuracy over the Nernstian model, and the model using only ion‐sensor inputs is 7.5% more accurate than the Nernstian model under the same conditions. By enabling more precise and efficient fertilizer application, these sensor arrays coupled to computational models can help increase crop yields, optimize resource use, and reduce environmental impact.

Goodrich, Payton [University of California Berkele↗

Appropriate “marginal” farmlands for second‐generation biofuel crops in North Carolina

Abstract Current research on bioenergy crops shows that perennial grasses can yield substantial amounts of dry biomass with relatively low inputs of water and fertilizer. In order to minimize competition with food production, it has been suggested that bioenergy crops could be directed to land areas less suitable for commodity crops, commonly referred to as “marginal” lands. These are land units with inherent limitations to vegetative growth and production, which may be due to several factors (soil physical and chemical properties, climatic conditions, etc.). However the term “marginal” is an adjective with imprecise meaning, and objective criteria for determining “marginal” lands for siting bioenergy crops are necessary. Here we propose that such criteria may be based on soil survey classifications and realistic yield estimates, and we show an example of its use to justify site selection for bioenergy crops in different regions of North Carolina.

09 BIOMASS FUELS↗

Nitrogen dynamics and physiological N use efficiency in high‐biomass sorghum

Improving nitrogen (N) efficiency is essential for sustainable high-biomass sorghum ( Sorghum bicolor L. Moench) production. This study evaluated leaf and stem N dynamics, canopy N remobilization, and physiological nitrogen use efficiency (pNUE) in two photoperiod-sensitive sorghum hybrids under two N rates (0 and 168 kg-N ha −1 ) across multiple environments in Texas and Illinois. Leaf N concentrations increased with plant height in the canopy with steeper gradients under low-N conditions, indicating enhanced N remobilization when N is limited. Stem tissue showed less variation in N concentration across canopy nodal positions, with within-plant differences ranging from 1.2 to 7.6 g kg −1 , compared to 3.1 to 16.3 g kg −1 in leaves. While pNUE was generally higher under unfertilized conditions, it varied largely by site; however, genotypic differences were minimal within the given year. These results highlight the importance of integrating environmental and management factors into breeding and fertilization strategies to enhance N efficiency in high-biomass sorghum.

60 APPLIED LIFE SCIENCES↗

Enhancement of the Magnetoresistance in the Mobility‐Engineered Compensated Metal Pt 5 P 2

Abstract The magnetoresistance (MR) in nonmagnetic materials continues to be a fertile research area in materials science. The search for giant, positive MR has been limited to a rather small window of materials such as high‐mobility semimetals in single‐crystalline form. Here, the observation of a very large positive MR in metallic Pt 5 P 2 in polycrystalline form is reported. The observations reveal that improvement of the crystallinity results in a significant enhancement of the positive MR, exceeding 10 000% at 9 T, comparable to high‐mobility semimetals. Based on first‐principles calculations combined with magnetotransport and thermoelectric measurements, the Fermi surface of Pt 5 P 2 is found to consist of a collection of multiple electron and hole pockets compensating one another, along with a characteristic pocket continuously connected to the adjacent Brillouin zone, together with possible topologically protected band crossings. This work extends the landscape of high MR candidate materials to polycrystalline metals, which demonstrates the importance of crystallinity and purity of the samples for the optimization of the MR.

36 MATERIALS SCIENCE↗

Decreased land use intensity improves surface soil quality on marginal lands

The Conservation Reserve Program (CRP) has been a major factor in land transitions out of intensive row-crop management on marginally productive lands in the central United States. While CRP can protect these more environmentally sensitive lands against erosion and potential nutrient loss, information on how CRP affects soil quality over time is limited. Using a chronosequence with 0–40 yr of CRP conversion history, we evaluated soil quality under different land use intensities (CRP, pasture, row crop) using the Soil Management Assessment Framework (SMAF). Effects of slope classes (higher [14–25%] and lower [2–14%]) and soil depth (0–120 cm) were also evaluated. Our results show that the soils were functioning at 84 and 78% of their theoretical capacity under CRP and row crop, respectively. Conversion to CRP enhanced overall soil quality by increasing soil biological, physical, and chemical attributes, but soil nutrient availability decreased due to the absence of fertilizer application. Increasing soil organic C (SOC) enhanced overall soil quality because of its impact on soil biological, physical, chemical, and nutrient conditions. Conversion to CRP will likely have greater benefits for more environmentally sensitive soils (i.e., higher slope) as demonstrated by structural equation modeling. Land use effects were also depth dependent, with more prominent effects within the 0-to-5-cm than the 5-to-15-cm depth increment. Overall, our methods focused on key soil quality indicators, confirmed ecological benefits of CRP conversion, and provided guidance for improved and simplified land management recommendations.

54 ENVIRONMENTAL SCIENCES↗

Approximately 15% of Miscanthus yield is lost at current commercial cutting heights in Iowa

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu (mxg) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

60 APPLIED LIFE SCIENCES↗