Search NASA⌕ Search

SEARCH · Search NASA

Results for “FIRST ROBOTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Ionic Polymer-Metal Composites (IPMCs) as Biomimetic Sensors, Actuators and Artificial Muscles: A Review

This paper presents an introduction to ionic polymer-metal composites and some mathematical modeling pertaining to them. It further discusses a number of recent findings in connection with ion-exchange polymer-metal composites (IPMCS) as biomimetic sensors and actuators. Strips of these composites can undergo large bending and flapping displacement if an electric field is imposed across their thickness. Thus, in this sense they are large motion actuators. Conversely by bending the composite strip, either quasi-statically or dynamically, a voltage is produced across the thickness of the strip. Thus, they are also large motion sensors. The output voltage can be calibrated for a standard size sensor and correlated to the applied loads or stresses. They can be manufactured and cut in any size and shape. In this paper first the sensing capability of these materials is reported. The preliminary results show the existence of a linear relationship between the output voltage and the imposed displacement for almost all cases. Furthermore, the ability of these IPMCs as large motion actuators and robotic manipulators is presented. Several muscle configurations are constructed to demonstrate the capabilities of these IPMC actuators. This paper further identifies key parameters involving the vibrational and resonance characteristics of sensors and actuators made with IPMCS. When the applied signal frequency varies, so does the displacement up to a critical frequency called the resonant frequency where maximum deformation is observed, beyond which the actuator response is diminished. A data acquisition system was used to measure the parameters involved and record the results in real time basis. Also the load characterizations of the IPMCs were measured and it was shown that these actuators exhibit good force to weight characteristics in the presence of low applied voltages. Finally reported are the cryogenic properties of these muscles for potential utilization in an outer space environment of a few Torrs and temperatures of the order of - 140 degrees Celsius. These muscles are shown to work quite well in such harsh cryogenic environments and thus present a great potential as sensors and actuators that can operate at cryogenic temperatures.

Shahinpoor, M.↗

Maximally Informative Statistics for Localization and Mapping

This paper presents an algorithm for localization and mapping for a mobile robot using monocular vision and odometry as its means of sensing. The approach uses the Variable State Dimension filtering (VSDF) framework to combine aspects of Extended Kalman filtering and nonlinear batch optimization. This paper describes two primary improvements to the VSDF. The first is to use an interpolation scheme based on Gaussian quadrature to linearize measurements rather than relying on analytic Jacobians. The second is to replace the inverse covariance matrix in the VSDF with its Cholesky factor to improve the computational complexity. Results of applying the filter to the problem of localization and mapping with omnidirectional vision are presented.

Deans, Matthew C.↗

Demonstration of Navigation Doppler Lidar Capabilities Onboard the First Commercial Lunar Lander

Landing on the Moon safely, softly, and precisely is still an extremely difficult task to achieve. Navigation Doppler Lidar (NDL) was designed to provide a solution to spaceflight landing vehicles in achieving this task. NDL is a high-performance, compact, and cost-effective velocity and altitude measurement instrument that has been developed, tested and improved over many years. Testing has now culminated with NDL’s successful operation on two spaceflight vehicles this year: Astrobotic’s Peregrine lunar lander and Intuitive Machines’ Odysseus lunar lander. Odysseus became the first U.S. vehicle to land successfully on the Moon since Apollo 17. The performance data obtained by NDL during the Intuitive Machines mission is exceptional, and this mission fully demonstrated NDL’s ability to produce critical velocity and altitude data for future robotic and human exploration missions to the Moon and other planetary bodies. This paper will give an overview of NDL briefly describing its history, architecture, and theory of operation. NDL’s system checkout on Astrobotic’s Peregrine lunar lander is then discussed followed by NDL’s performance during the Intuitive Machines Odysseus lunar lander mission. A description of how the data acquired by NDL is then used to perform trajectory reconstruction and animation is then provided. Finally, this paper concludes with potential uses of NDL’s acquired mission data to future applications.

Lunar Landing↗

Demonstration of Navigation Doppler Lidar Capabilities Onboard the First Commercial Lunar Lander

Landing on the Moon safely, softly, and precisely is still an extremely difficult task to achieve. Navigation Doppler Lidar (NDL) was designed to provide a solution to spaceflight landing vehicles in achieving this task. NDL is a high-performance, compact, and cost-effective velocity and altitude measurement instrument that has been developed, tested and improved over many years. Testing has now culminated with NDL’s successful operation on two spaceflight vehicles this year: Astrobotic’s Peregrine lunar lander and Intuitive Machines’ Odysseus lunar lander. Odysseus became the first U.S. vehicle to land successfully on the Moon since Apollo 17. The performance data obtained by NDL during the Intuitive Machines mission is exceptional, and this mission fully demonstrated NDL’s ability to produce critical velocity and altitude data for future robotic and human exploration missions to the Moon and other planetary bodies. This paper will give an overview of NDL briefly describing its history, architecture, and theory of operation. NDL’s system checkout on Astrobotic’s Peregrine lunar lander is then discussed followed by NDL’s performance during the Intuitive Machines Odysseus lunar lander mission. A description of how the data acquired by NDL is then used to perform trajectory reconstruction and animation is then provided. Finally, this paper concludes with potential uses of NDL’s acquired mission data to future applications.

Lunar Landing↗

Power Lander for Support of Long-Term Lunar Presence

Emerging industrial base and the consequent sustained manned Lunar presence will require consistent high power capacities. This paper proposes a first iteration design of a flyable electric power platform which could serve as an enabler of Lunar Development and Exploration. It is intended to support a small facility solo or an emerging industrial base as part of a grid. Lunar Missions, Habitats and Facilities stand to benefit from an expected decade of non-stop operation, the economics of scale, Commercial Off-The-Shelf (COTS) availability, standardization of design, and logistical support for Lunar encampments provided by this architecture. The unattended and unmanned vehicle design is to be man- and robotics-serviceable after delivery by current and proposed heavy-lift boosters. Design continuity within a family of systems will improve reliability through "lessons learned'' in the field. Further, various configurations of the proposed scalable architecture will provide reference platforms for the indigenous construction of similar power plant facilities from in-situ Lunar resources (ISRU). The baseline design should be directed towards those materials available on the Moon and expected to be manufacturable on-site within the first decade of operation.

Joyner, Russ↗

Global time optimal motions of robotic manipulators in the presence of obstacles

A practical method to obtain the global time optimal motions of robotic manipulators is presented. This method takes into account the nonlinear manipulator dynamics, actuator constraints, joint limits, and obstacles. Previously developed methods of optimizing manipulator motions along given paths and a local path optimization are utilized. A set of best paths is obtained first in a global search over the manipulator workspace, using graph search and hierarchical pruning techniques. These paths are used as initial conditions for a continuous path optimization to yield the global optimal motion. Examples of optimized motions of a six-degree-of-freedom manipulator, operating in a three-dimensional space with obstacles, are presented.

Shiller, Zvi↗

HAZBOT - A hazardous materials emergency response mobile robot

The authors describe the progress that has been made towards the development of a mobile robot that can be used by hazardous materials emergency response teams to perform a variety of tasks including incident localization and characterization, hazardous material identification/classification, site surveillance and monitoring, and ultimately incident mitigation. In September of 1991, the HAZBOT II vehicle performed its first end-to-end demonstration involving a scenario in which the vehicle: navigated to the incident location from a distant (150-200 ft.) deployment site; entered a building through a door with thumb latch style handle and door closer; located and navigated to the suspected incident location (a chemical storeroom); unlocked and opened the storeroom's door; climbed over the storeroom's 12 in. high threshold to enter the storeroom; and located and identified a broken container of benzene.

Stone, H. W.↗

NASA's Space Launch System: A Flagship for Exploration Beyond Earth's Orbit

The National Aeronautics and Space Administration s (NASA s) Space Launch System (SLS) Program, managed at the Marshall Space Flight Center, is making measurable progress toward delivering a new capability for human and scientific exploration. To arrive at the current plan, government and industry experts carefully analyzed hundreds of architecture options and selected the one clear solution to stringent requirements for safety, affordability, and sustainability over the decades that the rocket will be in operation. Slated for its maiden voyage in 2017, the SLS will provide a platform for further cooperation in space based on the International Space Station model. This briefing will focus on specific progress that has been made by the SLS team in its first year, as well as provide a framework for evolving the vehicle for far-reaching missions to destinations such as near-Earth asteroids, Lagrange Points, and Mars. As this briefing will show, the SLS will serve as an infrastructure asset for robotic and human scouts of all nations by harnessing business and technological innovations to deliver sustainable solutions for space exploration.

May, Todd A.↗

SpiderFab: Process for On-Orbit Construction of Kilometer-Scale Apertures

The SpiderFab effort has investigated the value proposition and feasibility of radically changing the way we build and deploy spacecraft by enabling space systems to fabricate and integrate key components on-orbit. In this Phase II effort, we have focused on developing and demonstrating tools and processes to enable robotic systems to manufacture and assemble high performance structural elements that will serve as the support structures for components such as antennas and solar arrays. Through testing of these technologies in the laboratory environment,these efforts have established the technical feasibility of the key capabilities required for in-space manufacture of large apertures such as antennas, solar arrays, and optical systems,maturing prototype technical solutions for these capabilities to TRL-4. The SpiderFab effort has resulted in successful post-NIAC transition of the technology, first to SBIR-funded development of a technology for in-space manufacture (ISM) of truss structures, and then to a NASA/STMD Tipping Point Technologies funded effort to prepare a flight demonstration of ISM of a structure for a GEO communications satellite.

Manufacturing↗

Graphic simualtion test bed for robotics applications in a workstation environment

Graphical simulation is a cost-effective solution for developing and testing robots and their control systems. The availability of various high-performance workstations makes these systems feasible. Simulation offers preliminary testing of systems before their actual realizations, and it provides a framework for developing new control and planning algorithms. On the other hand, these simulation systems have to have the capability of incorporating various knowledge-based system components, e.g., task planners, representation formalisms, etc. They also should have an appropriate user interface, which makes possible the creation and control of simulation models. ROBOSIM was developed jointly by MSFC and Vanderbilt University, first in a VAX environment. Recently, the system has been ported to an HP-9000 workstation equipped with an SRX graphics accelerator. The user interface of the system now contains a menu- and icon-based facility, as well as the original ROBOSIM language. The system is also coupled to a symbolic computing system based on Common Lisp, where knowledge-based functionalities are implemented. The knowledge-based layer uses various representation and reasoning facilities for programming and testing the control systems of robots.

Springfield, J.↗

A control approach for robots with flexible links and rigid end-effectors

Multiarm flexible robots with dexterous end effectors are currently being considered in such tasks as satellite retrieval, servicing and repair where a two phase problem can be identified: Phase 1, robot positioning in space; Phase 2, object retrieval. Some issues in Phase 1 regarding modelling and control strategies for a robotic system comprised of along flexible arm and a rigid three-link end effector are presented. The control objective is to maintain the last (rigid) link stationary in space in the presence of an additive disturbance caused by the flexible energy in the first link after a positioning maneuver has been accomplished. Several configuration strategies can be considered, and optimal decentralized servocompensators can be designed. Preliminary computer simulations are included for a simple proportional controller to illustrate the approach.

Barbieri, Enrique↗

Lunar Meteoroid Impact Observations and the Flux of Kilogram-Size Meteoroids

Meteor showers dominate the environment in this size range and explain the evening/morning flux asymmetry of 1.5:1. With sufficient numbers of impacts, this technique can help determine the population index for some showers. Measured flux of meteoroids in the 100g to kilograms range is consistent with other observations. We have a fruitful observing program underway which has significantly increased the number of lunar impacts observed. Over 200 impacts have been recorded in about 4 years. This analysis reports on the 115 impacts taken under photometric conditions during the first 3 full years of operation. We plan to continue for the foreseeable future as follows: 1) Run detailed model to try explain the concentration near the trailing limb; 2) Build up statistics to better understand the meteor shower environment; 3) Provide support for robotic seismometers and dust missions; and 4) Deploy near-infrared and visible cameras with dichroic beamsplitter to 0.5m telescope in New Mexico.

Suggs, Rob↗

Robotics Platforms Incorporating Manipulators Having Common Joint Designs

Manipulators in accordance with various embodiments of the invention can be utilized to implement statically stable robots capable of both dexterous manipulation and versatile mobility. Manipulators in accordance with one embodiment of the invention include: an azimuth actuator; three elbow joints that each include two actuators that are offset to allow greater than 360 degree rotation of each joint; a first connecting structure that connects the azimuth actuator and a first of the three elbow joints; a second connecting structure that connects the first elbow joint and a second of the three elbow joints; a third connecting structure that connects the second elbow joint to a third of the three elbow joints; and an end-effector interface connected to the third of the three elbow joints.

Kennedy, Brett A.↗

Controlling Palm-Object Interactions via Friction for Enhanced In-Hand Manipulation

In-hand manipulation is necessary, yet challenging for robotic hands as robots begin to interact with real-world objects and environments. The intentional incorporation of an active palm can lead to improved dexterity. In this work, we demonstrate how controlling the palm-object interaction enables access to different sets of motion primitives. We first discuss how various properties of the palm affect in-hand manipulation, as well as grasping. Here, we focus on varying the friction force between the object and the palm by either changing the coefficient of friction or the normal load. We explore how these two design factors can be actively controlled to enable 5-degree-of-freedom object motion within the hand. We present variable-friction and variable-preload palms that enable on-the-fly switching between in-plane and out-of-plane manipulation modes. Additionally, we discuss their impact on grasp stability. Finally, we demonstrate how an object can be translated and pivoted within the hand by sequentially performing synchronized palm and finger actions.

Clark B Teeple↗

Safe Operational Envelope for the LSMS Family of Cable-Driven Cranes

The Lightweight Surface Manipulation System, or LSMS, is a family of long-reach cable-actuated robotic cranes. They are designed for planetary surface operations on the Moon and Mars. Their low structural weight and compact packaging reduces the fuel costs associated with space travel. The LSMS can be operated by humans, who can be on site or remotely, or autonomously. The goal of this research is to help human operators and path planning algorithms avoid unsafe states during operation. To this end, this work leverages a geometrical model of the LSMS and formulates a new dynamic model. These are later used to define the safe operational envelope for the LSMS family. The paper classifies the constraints that define the safe operational envelope in three groups: motor constraints, geometric constraints, and cable tension constraints. Keeping the cables under tension is necessary to maintain controllability over the joint angles. Two types of loss of tension events are identified for each of the cables. First, an excessive reel out of the cables can lead to a loss of tension, where the LSMS links behave like a pendulum. Second, an excessive reel in of the cables can lead to a link tip-over. This can cause a violent clash between the links on the LSMS. The paper visualizes these constraints for the LSMS-L35, the smallest robot within the family.

LSMS↗

Robotic pendant drop: containerless liquid for μs-resolved, AI-executable XPCS

Abstract The dynamics and structure of mixed phases in a complex fluid can significantly impact its material properties, such as viscoelasticity. Small-angle X-ray Photon Correlation Spectroscopy (SA-XPCS) can probe the spontaneous spatial fluctuations of the mixed phases under various in situ environments over wide spatiotemporal ranges (10 −6 –10 3 s /10 −10 –10 −6 m). Tailored material design, however, requires searching through a massive number of sample compositions and experimental parameters, which is beyond the bandwidth of the current coherent X-ray beamline. Using 3.7-μs-resolved XPCS synchronized with the clock frequency at the Advanced Photon Source, we demonstrated the consistency between the Brownian dynamics of ~100 nm diameter colloidal silica nanoparticles measured from an enclosed pendant drop and a sealed capillary. The electronic pipette can also be mounted on a robotic arm to access different stock solutions and create complex fluids with highly-repeatable and precisely controlled composition profiles. This closed-loop, AI-executable protocol is applicable to light scattering techniques regardless of the light wavelength and optical coherence, and is a first step towards high-throughput, autonomous material discovery.

36 MATERIALS SCIENCE↗

Advanced Epi Tools for Gallium Nitride Light Emitting Diode Devices

Over the course of this program, Applied Materials, Inc., with generous support from the United States Department of Energy, developed a world-class three chamber III-Nitride epi cluster tool for low-cost, high volume GaN growth for the solid state lighting industry. One of the major achievements of the program was to design, build, and demonstrate the world’s largest wafer capacity HVPE chamber suitable for repeatable high volume III-Nitride template and device manufacturing. Applied Materials’ experience in developing deposition chambers for the silicon chip industry over many decades resulted in many orders of magnitude reductions in the price of transistors. That experience and understanding was used in developing this GaN epi deposition tool. The multi-chamber approach, which continues to be unique in the ability of the each chamber to deposit a section of the full device structure, unlike other cluster tools, allows for extreme flexibility in the manufacturing process. This robust architecture is suitable for not just the LED industry, but GaN power devices as well, both horizontal and vertical designs. The new HVPE technology developed allows GaN to be grown at a rate unheard of with MOCVD, up to 20x the typical MOCVD rates of 3{micro}m per hour, with bulk crystal quality better than the highest-quality commercial GaN films grown by MOCVD at a much cheaper overall cost. This is a unique development as the HVPE process has been known for decades, but never successfully commercially developed for high volume manufacturing. This research shows the potential of the first commercial-grade HVPE chamber, an elusive goal for III-V researchers and those wanting to capitalize on the promise of HVPE. Additionally, in the course of this program, Applied Materials built two MOCVD chambers, in addition to the HVPE chamber, and a robot that moves wafers between them. The MOCVD chambers demonstrated industry-leading wavelength yield for GaN based LED wafers and industry-leading uptime enabled in part by a novel in-situ cleaning process developed in this program.

36 MATERIALS SCIENCE↗

Process development for automated solar cell and module production. Task 4: Automated array assembly

The Unimate robot was programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. Mechanical construction of the Automated Lamination Station and Final Assembly Station were completed on schedule. All final wiring and interconnect cables were also completed and the first operational testing began. The final controlling program was written. A local fabricator was contracted to produce the glass reinforced concrete panels to be used for testing and deliverables. A video tape showing all three stations in operation was produced.

Hagerty, J. J.↗