Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORECAST MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

A study of cloud microphysics and precipitation over the Tibetan Plateau by radar observations and cloud-resolving model simulations

Cloud microphysical properties and precipitation over the Tibetan Plateau (TP) are unique because of the high terrains, clean atmosphere, and sufficient water vapor. With dual-polarization precipitation radar and cloud radar measurements during the Third Tibetan Plateau Atmospheric Scientific Experiment (TIPEX-III), the simulated microphysics and precipitation by the Weather Research and Forecasting model (WRF) with the Chinese Academy of Meteorological Sciences (CAMS) microphysics and other microphysical schemes are investigated through a typical plateau rainfall event on 22 July 2014. Results show that the WRF-CAMS simulation reasonably reproduces the spatial distribution of 24-h accumulated precipitation, but has limitations in simulating time evolution of precipitation rates. Here, the model-calculated polarimetric radar variables have biases as well, suggesting bias in modeled hydrometeor types. The raindrop sizes in convective region are larger than those in stratiform region indicated by the small intercept of raindrop size distribution in the former. The sensitivity experiments show that precipitation processes are sensitive to the changes of warm rain processes in condensation and nucleated droplet size (but less sensitive to evaporation process). Increasing droplet condensation produces the best area-averaged rain rate during weak convection period compared with the observation, suggesting a considerable bias in thermodynamics in the baseline simulation. Increasing the initial cloud droplet size causes the rain rate reduced by half, an opposite effect to that of increasing droplet condensation.

54 ENVIRONMENTAL SCIENCES↗

Identifying Meteorological Drivers for Errors in Modeled Winds along the Northern California Coast

Abstract An accurate wind resource dataset is required for assessing the potential energy yield of floating offshore wind farms that are expected along the California outer continental shelf. The National Renewable Energy Laboratory has developed and disseminated an updated wind resource dataset offshore of California, using the Weather Research and Forecasting Model, referred to as the CA20 dataset. As compared to buoy lidar measurements that have become available recently, the CA20 dataset showed significant positive biases for 100-m wind speeds along Northern California wind energy lease areas. To investigate the meteorological drivers for the model errors, we first consider two 1-yr simulations run with two different planetary boundary layer (PBL) parameterizations: the Mellor–Yamada–Nakanishi–Niino (MYNN) PBL scheme (the chosen configuration in the CA20 dataset) and the Yonsei University PBL scheme (which significantly reduces the bias in modeled winds). By comparing the 1-yr simulations to the concurrent lidar buoy observations, we find that errors are larger with the MYNN PBL scheme in warm seasons. We then dive deeper into the analysis by running simulations for short-term (3-day) case studies to evaluate the sensitivity of initial/boundary condition forcings on model results. By analyzing the short-term simulations, we find that during synoptic-scale northerly flows driven by the North Pacific high and inland thermal low, a coastal warm bias in the MYNN simulation is mainly responsible for the modeled wind speed bias by altering the boundary layer thermodynamics. The results of our analysis will help guide the creation of an updated version of the CA20 dataset.

17 WIND ENERGY↗

Completion Report for Model Evaluation Well ER-11-2: Corrective Action Unit 98: Frenchman Flat

Model Evaluation Well ER-11-2 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in August 2012 as part of a model evaluation program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radionuclide data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to provide data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test PIN STRIPE, conducted in borehole U-11b in 1966. Well ER-11-2 will provide information that can be used to refine the Phase II Frenchman Flat hydrostratigraphic framework model if necessary, as well as to support future groundwater flow and transport modeling. The main 31.1-centimeter (cm) hole was drilled to a total depth of 399.6 meters (m). A completion casing string was not set in Well ER-11-2. However, a piezometer string was installed in the 31.1-cm open hole. The piezometer is composed of 7.3-cm stainless-steel tubing hung on 6.0-cm carbon-steel tubing via a crossover sub. The piezometer string was landed at 394.5 m, for monitoring the lower tuff confining unit. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, water quality (including tritium and other test-related radionuclides) measurements, and water level measurements. The well penetrated 42.7 m of Quaternary and Tertiary alluvium and 356.9 m of Tertiary volcanic rock. The water-level measured in the piezometer string on September 25, 2012, was 353.8 m below ground surface. No tritium above levels detectable by field methods were encountered in this hole. No well development or hydrologic testing was conducted in this well immediately after completion, and future well development, sampling, and hydrologic testing planned for this well will be limited due to the diameter of the piezometer string. The stratigraphy, general lithology, and the water level are as expected, but the section of geology encountered is higher than expected due to faulting. No tritium above the minimum detection limit of the field equipment was detected because the target aquifer (the Topopah Spring aquifer) at Well ER-11-2 is structurally higher than expected and thus unsaturated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Generation of realistic input parameters for simulating atmospheric point-spread functions at astronomical observatories

High-fidelity simulated astronomical images are an important tool in developing and measuring the performance of image-processing algorithms, particularly for high precision measurements of cosmic shear – correlated distortions of images of distant galaxies due to weak gravitational lensing caused by the large-scale mass distribution in the Universe. For unbiased measurements of cosmic shear, all other sources of correlated image distortions must be modeled or removed. One such source is the correlated blurring of images due to optical turbulence in the atmosphere, which dominates the point-spread function (PSF) for ground-based instruments. In this work, we leverage data from weather forecasting models to produce wind speeds and directions, and turbulence parameters, that are realistically correlated with altitude. To study the resulting correlations in the size and shape of the PSF, we generate simulated images of the PSF across a ~10 square-degree field of view – the size of the camera focal plane for the Vera C. Rubin Observatory in Chile – using weather data and historical seeing for a geographic location near the Observatory. We make quantitative predictions for two-point correlation functions (2PCF) that are used in analyses of cosmic shear. We observe a strong anisotropy in the two-dimensional 2PCF, which is expected based on observations in real images, and study the dependence of the orientation of the anisotropy on dominant wind directions near the ground and at higher altitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact Assessment of All-Sky TROPICS Microwave Observations on the NASA GEOS Analyses and Forecasts and Progress to Use the Data in the JEDI-GEOS Analysis System

The NASA Time-Resolved Observations of Precipitation structure and storm Intensity with a Constellation of Smallsats (TROPICS) mission is a constellation of small satellites carrying state-of-art microwave temperature and humidity sounders with 12 channels between 91 GHz and 205 GHz frequency. Including TROPICS-pathfinder, launched on 30 June 2021, five TROPICS CubeSats operate and provide temperature and humidity data to NWP and atmospheric retrieval communities. This study is dedicated to evaluating the impact of the TROPICS satellite constellation microwave observations in numerical weather prediction (NWP) using the NASA Goddard Earth Observing System (GEOS). The TROPICS-01 (TROPICS-Pathfinder), TROPICS-03, TROPICS-05, and TROPICS-06 data in all-sky conditions over the ocean during the period of 25 July 2023 and 6 September 2023 are used for assessing forecast impacts on global NWP analysis and five-day forecasts. A series of experiments are carried out to measure the benefits of assimilating observations from only temperature sounders, water vapor sounders, and both sounders. Statistical analysis of the Observing System Experiments (OSEs) results has shown incremental improvements in global model forecast skills for critical geophysical parameters, including temperature, winds, and geopotential heights. The results demonstrate the potential of the TROPICS-like data to positively impact NWP by adding new information to the current observation and forecast system. In another set of experiments, the TROPICS-03, TROPICS-05, and TROPICS-06 data sets are added to the TROPICS-01 one by one to evaluate the impacts of increasing the revisit rate of TROPICS satellite measurements on NWP analysis for a tropical cyclone’s dynamical and microphysical structures. This study offers important insights into the capabilities of a new generation of small satellite microwave radiometers based on emerging technologies, including their unique measurements at 118 GHz and 205 GHz that are not available in traditional operational microwave sounders. Finally, the efforts to implement these new developments for TROPICS in the JEDI-GEOS atmospheric data assimilation system are in progress, and preliminary results from cycled JEDI-GEOS data assimilation experiments are presented.

Min-Jeong Kim↗

Modeling the Impacts of Urbanization on Summer Thermal Comfort: The Role of Urban Land Use and Anthropogenic Heat

Urban land use and anthropogenic heat (AH) emission can considerably influence the human thermal comfort during extreme heat events. In this study, a spatially heterogeneous AH emission data and updated urban land use data are integrated into the Weather Research and Forecasting model to simulate the physical processes of urban warming during summer. Simulations conducted in the Yangtze River Delta (YRD) of east China suggest that the mean urban heat island intensity reaches 1.49 °C in urbanized areas during summer, with AH emission making a considerable contribution. The warming effect due to urban land use is intensified during extremely hot days, but in contrast, the AH effects are slightly reduced. Urban development increases the total thermal discomfort hours by 27% in the urban areas of YRD, with AH and urban land use contributing nearly equal amount. By limiting the daytime latent heat release, urban land use reduces the daily maximum heat stress particularly during extremely hot days; however, such alleviations can be offset by the AH emission. We conclude strategies for mitigation of urban heat island effect and heat stress in cities should therefore include measures to reduce AH emission.

54 ENVIRONMENTAL SCIENCES↗

Computer Model Calibration with Time Series Data Using Deep Learning and Quantile Regression

Computer models play a key role in many scientific and engineering problems. One major source of uncertainty in computer model experiments is input parameter uncertainty. Computer model calibration is a formal statistical procedure to infer input parameters by combining information from model runs and observational data. The existing standard calibration framework suffers from inferential issues when the model output and observational data are high-dimensional dependent data, such as large time series, due to the difficulty in building an emulator and the nonidentifiability between effects from input parameters and data-model discrepancy. To overcome these challenges, we, in this work, propose a new calibration framework based on a deep neural network (DNN) with long short-term memory layers that directly emulates the inverse relationship between the model output and input parameters. Adopting the “learning with noise” idea, we train our DNN model to filter out the effects from data-model discrepancy on input parameter inference. We also formulate a new way to construct interval predictions for DNN using quantile regression to quantify the uncertainty in input parameter estimates. Through a simulation study and real data application with the Weather Research and Forecasting Model Hydrological modeling system (WRF-Hydro), we show our approach can yield accurate point estimates and well-calibrated interval estimates for input parameters.

97 MATHEMATICS AND COMPUTING↗

Compact Nanoparticle Size Distribution Measurement System for Unmanned Aerial Systems (UAS)

Brechtel Manufacturing Incorporated (BMI) is developing a compact, nanoparticle sizer optimized for use on Unmanned Aerial Vehicles (UAVs) and other applications where space, weight, power and cost are significant barriers to deployment. The instrument will allow observations of size-resolved aerosol number concentration (0.005 < D p < 0.3 μm, D p is particle diameter). The new development helps address the need for reduced uncertainties in atmospheric radiative transfer and weather prediction model sensitivities to ambient aerosol properties by promoting the capability to perform aerosol measurements more often, in more locations, and at reduced cost. Applications of the new technology include vertical atmospheric profiling with UAVs, balloons and other mobile platforms to constrain weather forecast models, long-term air quality measurements, aerosol health effects studies, and routine monitoring of ambient aerosol properties in urban air sheds.

47 OTHER INSTRUMENTATION↗

Continuously Improving Parametric Modeling with Historical Data on the ICESat-2 Mission

This paper delves into the details of the Joint Confidence Level (JCL) process performed for the Ice, Cloud, and Land Elevation Satellite (ICESat)-2 mission and how past performance was incorporated into subsequent JCL models to enable the project to continuously analyze potential slips to their launch readiness date (LRD). One year prior to the mission Preliminary Review (mPDR), the JCL model development process began. The first model was well received at the mPDR, held on October 10, 2012, and the input received by the Standing Review Board was incorporated into the model for the official data drop for key decision point (KDP)-C. The 70% JCL results of the October 2012 mPDR model forecast an LRD of February 2017 and associated cost of $830M. This result in 2012 immediately highlighted potential challenges with the project-planned LRD of July 2016. The year following the mPDR, the project had sustained a oneyear slip in the LRD due to problematic systems engineering requirement issues which impacted all project subsystems. This slip moved the project planned LRD from July 2016 to July 2017, an additional 5 months beyond the 2012 model’s 70% JCL result for the LRD of February 2017. As the project was quickly approaching the mission Critical Design Review (mCDR), the need for reliable JCL results increased significantly. The project held discussions on the JCL modeling process and focused on the input uncertainty distributions. Specifically, to identify the uncertainty distributions that the 2012 mPDR model would have needed to produce a 70% LRD result of July 2017. This led the project to compare multiple uncertainty distributions, and ultimately spurred the project to utilize uncertainty distributions that incorporated project past performance and historical data to forecast potential LRD slips. The revised results, created in 2014 and utilizing the new uncertainty distributions, showed that with 70% confidence, the ICESat-2 mission would launch in August 2018 with a cost of $1,044M. Today, ICESat-2 is scheduled to launch on September 15, 2018 with a project management (PM) agreement value of $1,056M. This illustrates how a JCL model can be continuously improved to produce valuable results for a project, even in cases of LRD delays. The primary reason for the ICESat-2 LRD delay is due to a laser failure on the primary instrument. Laser failure was one of the highest risk and uncertainty drivers within the JCL model. The project placed the most risk in this area of the model, and the model further identified the laser as the top risk driver and contributor to the LRD result. This further illustrates how a JCL can be used to predict and quantify possible issues on new technology missions.

Krygiel, Joseph↗

IM3/HyperFACETS Thermodynamic Global Warming (TGW) Simulation Datasets

Publication For a thorough description of the methods, see the peer-reviewed paper: Jones, A.D., Rastogi, D., Vahmani, P. et al. Continental United States climate projections based on thermodynamic modification of historical weather. Sci Data 10, 664 (2023). https://doi.org/10.1038/s41597-023-02485-5 Overview The IM3 / HyperFACETS climate simulations provide 40-year historical (1980-2019) as well as four 80-year future simulations (2020-2099) over the U.S. The future simulations are split into near (2020-2059) and far future (2060-2099) segments. The future scenarios span a range of plausible changes in future climate (both Global Circulation Model (GCM) and Representative Concentration Pathways/Shared Socioeconomic Pathway (RCP/SSP) dimensions). The simulations provide climate variables with high spatiotemporal resolution (25 hourly variables and 207 3-hourly variables at 12 km2). The datasets are generated using dynamical downscaling with the WRF (Weather Research and Forecasting) model (version 4.2.1) and therefore preserve physical consistency across variables. WRF is a state-of-the-art, fully compressible, non-hydrostatic, mesoscale numerical weather prediction model. WRF is coupled with an urban canopy model (UCM), which resolves urban surfaces. The future scenarios were developed using a thermodynamic global warming approach where past events are replayed under a range of future warming conditions. These scenarios therefore provide a perspective on potential increases in extreme event intensity, geographic scope, and duration, with previously non-extreme conditions potentially crossing new thresholds to be considered extreme by today's standards. This approach is not intended to estimate future changes in extreme event frequency that might result from changes in large-scale atmospheric dynamics. This dataset has NOT been bias corrected. A bias corrected version of selected variables is under development and will be released here when available. Scenarios Files Data for each scenario is provided in weekly NetCDF files. 25 variables are available at hourly resolution, and 207 variables are available at three-hourly resolution. Spatial resolution is 12km and spans the conterminous United States (CONUS), including some areas of Canada and Mexico, resulting in a grid of 424 by 299 cells. The spatial projection is a Lambert Conformal Conic with the following proj-string: "+proj=lcc +lat_0=40.0000076293945 +lon_0=-97 +lat_1=30 +lat_2=45 +x_0=0 +y_0=0 +R=6370000 +units=m +no_defs". The available scenarios and simulation periods are listed below: historical | 1980 - 2019 rcp45cooler | 2020 - 2059 rcp45cooler | 2060 - 2099 rcp45hotter | 2020 - 2059 rcp45hotter | 2060 - 2099 rcp85cooler | 2020 - 2059 rcp85cooler | 2060 - 2099 rcp85hotter | 2020 - 2059 rcp85hotter | 2060 - 2099 * The first year (1979, 2019, and 2059) of data within each scenario represents a model warmup period and should not be used. These are located in the `spinup_files` directory. Historical year 2020 is considered an extra year of data beyond the simulation period and can be found in the `additional_files` directory. For information on specific variables and a more in-depth discussion of methodology, please refer to the data landing page at https://tgw-data.msdlive.org. Delta Warming Files The global and CONUS warming deltas for each scenario are provided in degrees Celsius annually and monthly. Restart Files Yearly restart files are provided for each scenario which can be used to restart the WRF model at a particular point in time. Spinup Files The first year of data within each simulation period represents a model warmup period and should not be used. The files are provided here for the sake of reproducibility. Additional Files Additional years of data are provided as an extension of the historic simulation.

Jones, Andrew D.↗

Analyses for High‐Resolution Projections Through the End of the 21st Century for Precipitation Extremes Over the United States

This study compares an ensemble of dynamically downscaled projections of extreme daily precipitation over the contiguous United States (CONUS). With a grid spacing of 12 km and a domain that encompasses most of North America, we use the Weather Research and Forecast model as a regional climate model. We incorporate initial and boundary conditions from three different Coupled Model Intercomparison Project Phase 5 Earth system models (ESMs). We focus on precipitation extremes in the future climate (2045–2054 and 2085–2094) by comparing a business-as-usual high-emissions scenario to emissions from a historical period (1995–2004). In the historical period, the Weather Research and Forecasting-downscaled simulations result in significant improvements over the ESMs for precipitation extremes. In the analyses of future climate, there is a large increase in the projected frequency of extreme precipitation events over the entire CONUS and a decrease in median precipitation days. Moreover, most regions show an increase in the number of dry days in the future scenarios. The magnitude of extreme precipitation events is projected to increase in the CONUS at all temperatures above freezing. The strongest precipitation events will increase in intensity, primarily because of a shift in precipitation distribution due to the increase in near-surface air temperatures (Clausius-Claperyon relationship). However, these events are also affected by changes in some atmospheric dynamical factors, such as stronger low level jet, especially over the Midwestern United States. In addition, compared to those calculated by the ESMs, the downscaled projections show important regional differences in the frequency and magnitude of extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗

A novel data gaps filling method for solar PV output forecasting

This study proposes a modified gaps filling method, expanding the column mean imputation method and evaluated using randomly generated missing values comprising 5%, 10%, 15%, and 20% of the original data on power output. The XGBoost algorithm was implemented as a forecasting model using the original and processed datasets and two sources of solar radiation data, namely, Shortwave Radiation (SWR) from Advanced Himawari Imager 8 (AHI-8) and Surface Solar Radiation Downward (SSRD) from ERA5 global reanalysis data. Further, the accuracy of the two sets of forecasted power output was evaluated using Root Mean Square Error (RMSE) and Mean Absolute Error (MAE). Results show that by applying the proposed gap filling method and using SWR in forecasting solar photovoltaic (PV) output, the improvement in the RMSE and MAE values range from 12.52% to 24.30% and from 21.10% to 31.31%, respectively. Meanwhile, using SSRD, the improvement in the RMSE values range from 14.01% to 28.54% and MAE values from 22.39% to 35.53%. To further evaluate the accuracy of the proposed gap-filling method, the proposed method could be validated using different datasets and other forecasting methods. Future studies could also consider applying the said method to datasets with data gaps higher than 20%.

Energy & Fuels↗

Applications of estimation theory to numerical weather prediction

Numerical weather prediction (NWP) is an initial value problem for a system of nonlinear partial differential equations in which the initial values are known only incompletely and inaccurately. Data at initial time can be supplemented, however, by observations of the system distributed over a time interval preceding it. Estimation theory was successful in approaching such problems for models governed by systems of ordinary differential equations and of linear PDEs. Estimation-theoretic methods for NWP are developed. A model exhibiting many features of large scale atmospheric flow important in NWP is the one governed by the shallow fluid equations. The estimation problem for a linearized formulation of these equations is studied. A finite difference version of the equations is used as a forecast model to simulate the numerical models used in NWP.

Cohn, S.↗

Integrating Low-Cost Sensor Systems and Networks to Enhance Air Quality Applications

Recent advances in low-cost air quality sensor systems are rapidly increasing the accessibility of air quality information around the world. At the same time, there are many technical challenges to appropriately and effectively using of the information they provide. A key opportunity to increase the applicability and actionability of low-cost sensor data is to use these devices at network scale and combine their information with insights from other air quality data sources such as numerical models and satellite remote sensing. When the limitations of low-cost sensors are understood and acknowledged, and appropriate complementary data are used to overcome these limitations, low cost sensors can support a variety of applications such as improving location-specific air quality forecasting and estimation, quantifying local source impacts, identifying air quality disparities, assessing the benefits of mitigation actions, and promoting community engagement with air quality issues. This presentation will first provide an overview and summarize key findings from a recently released World Meteorological Organization report discussing how networks of low-cost air quality sensor systems can be integrated to effectively support such applications. The presentation will also give a brief overview of an ongoing NASA-funded effort to create accessible tools for integrating multiple sources of air quality information, including global forecasting models, satellite remote sensing data, and in-situ information from both regulatory and low-cost monitors.

Carl Malings↗

Numerical modeling of a historic storm: Simulating the Blizzard of 1888

The National Oceanic and Atmospheric Administration/Cooperative Institute for Research in Environmental Sciences Twentieth Century Reanalysis (20CR) is used to explore the feasibility of high-resolution simulation of a historic extratropical cyclone event: The New England Blizzard of 1888. Using the 20CR as initial and lateral boundary conditions for the Weather Research and Forecasting model, a reasonable depiction of the cyclone is obtained, albeit displaced significantly to the north of the observed cyclone during the later stages of the event. Despite the position error, the simulated storm produces heavy snowfall over parts of New England and intense offshore cyclogenesis.

54 ENVIRONMENTAL SCIENCES↗

A modeling examination of cloud seeding conditions under the warmer climate in Utah, USA

Assessment of how the wintertime cloud seeding conditions over Utah's mountains may change provides essential information for the state to work on increasing its snowpack in the warmer climate. Here in this study, data from the National Center for Atmospheric Research's high-resolution, convection-permitting Weather Research and Forecasting model are used to evaluate suitable conditions for wintertime cloud seeding over Utah's mountains, and to estimate future changes to these conditions under a pseudo-global warming scenario. While previous studies have examined historical cloud seeding conditions, this is the first study that explores the impact of future climate change on these conditions. Based on two atmospheric variables commonly used in cloud-seeding operations, i.e. average temperature from the surface to 1 km above ground level (-20 °C≤T≤-6 °C) and vertically integrated supercooled liquid water (SLW > 0.01 mm), Utah's mountains are suitable for seeding more than 20% of the time during winter. A greater rate of suitability exists in the northern and Uinta Mountains. In the warmer climate under a high-emissions scenario, these seeding conditions may wane as the percentage of precipitating clouds suitable for seeding, about 60% under current conditions, would decline to about 40% across the state with significance. This projected decrease is due to rising temperatures and a decreased frequency of precipitation events. These findings imply that climate warming will narrow the window of opportunity for winter cloud seeding operation in Utah.

54 ENVIRONMENTAL SCIENCES↗

Modeling Arctic boundary layer cloud streets at grey-zone resolutions

To better understand how model resolution affects the formation of Arctic boundary layer clouds, we investigated the influence of grid spacing on simulating cloud streets that occurred near Utqiagvik (formerly Barrow), Alaska on 2 May 2013 and were observed by the Moderate Resolution Imaging Spectroradiometer (MODIS). The Weather Research and Forecasting model was used to simulate the clouds using nested domains with increasingly fine resolution ranging from a horizontal grid spacing of 27 km in the boundary-layer-parameterized mesoscale domain to a grid spacing of 0.111 km in the large-eddy-permitting domain. We investigated the model-simulated mesoscale environment, horizontal and vertical cloud structures, boundary layer stability, and cloud properties, all of which were subsequently used to interpret the observed roll-cloud case. Increasing model resolution led to a transition from a more buoyant boundary layer to a more shear-driven turbulent boundary layer. The clouds were stratiform-like in the mesoscale domain, but as the model resolution increased, roll-like structures, aligned along the wind field, appeared with ever smaller wavelengths. A stronger vertical water vapor gradient occurred above the cloud layers with decreasing grid spacing. With fixed model grid spacing at 0.333 km, changing the model configuration from a boundary layer parameterization to a large-eddy-permitting scheme produced a more shear-driven and less unstable environment, a stronger vertical water vapor gradient below the cloud layers, and the wavelengths of the rolls decreased slightly. In this study, only the large-eddy-permitting simulation with gird spacing of 0.111 km was sufficient to model the observed roll clouds.

Lai, Hui-Wen↗

Evaluation of Skin Temperatures Retrieved from GOES-8

Skin temperatures derived from geostationary satellites have the potential of providing the temporal and spatial resolution needed for model assimilation. To adequately assess the potential improvements in numerical model forecasts that can be made by assimilating satellite data, an estimate of the accuracy of the skin temperature product is necessary. A particular skin temperature algorithm, the Physical Split Window Technique, that uses the longwave infrared channels of the GOES Imager has shown promise in recent model assimilation studies to provide land surface temperatures with reasonable accuracy. A comparison of retrieved GOES-8 skin temperatures from this algorithm with in situ measurements is presented. Various retrieval algorithm issues are addressed including surface emissivity

Suggs, Ronnie, J.↗