Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Low-Rate Cycling Regeneration Sustains NMC811–Graphite Battery Performance through Extreme Ultrafast Charging

Urban air mobility (UAM) systems, such as electric vertical takeoff and landing (eVTOL) aircraft, require batteries capable of extreme ultrafast charging to support high-frequency operations. Here, in this work, we evaluate the electrochemical stability of NMC811–graphite full cells using a complex mixed-modal protocol designed to simulate the aggressive turnaround demands of UAM missions. We demonstrate that incorporating a periodic low-rate (0.3C) “regeneration” cycle enables cells to maintain 96% capacity retention over 900 cycles, despite repeated exposure to ultrafast pulses. To validate the efficacy of this regeneration mechanism, we performed simplified control experiments comparing continuous 10C charging against a 10C–0.3C interleaved protocol. Advanced characterization reveals that while mechanical particle fracture is pervasive at these rates, the regeneration cycles decelerate the electrochemical degradation by resolving spatially heterogeneous Ni oxidation states and relaxing lithium-ion concentration gradients. These findings provide a vital mechanistic framework for battery operation, proving that restorative charging can effectively delay and mitigate failure in demanding UAM applications.

batteries↗

Solution-Grown Rubrene Crystals as Radiation Detecting Devices

There has been increased interest in organic semiconductors over the last decade because of their unique properties. Of these, 5, 6, 11, 12-tetraphenylnaphthacene (rubrene) has generated the most interest because of its high charge carrier mobility. In this paper, large single crystals with a volume of ~1 cm 3 were grown from solution by a temperature reduction technique. The faceted crystals had flat surfaces and cm-scale, visually defect-free areas suitable for physical characterization. X-ray diffraction analysis indicates that solvent does not incorporate into the crystals and photoluminescence spectra are consistent with pristine, high-crystallinity rubrene. Furthermore, the response curve to pulsed optical illumination indicates that the solution grown crystals are of similar quality to those grown by physical vapor transport, albeit larger. The good quality of these crystals in combination with the improvement of electrical contacts by application of conductive polymer on the graphite electrodes have led to the clear observation of alpha particles with these rubrene detectors. Finally, preliminary results with a 252 Cf source generate a small signal with the rubrene detector and may demonstrate that rubrene can also be used for detecting high-energy neutrons.

36 MATERIALS SCIENCE↗

Regulation of electron transfer processes affects phototrophic mat structure and activity

Phototrophic microbial mats are among the most diverse ecosystems in nature. These systems undergo daily cycles in redox potential caused by variations in light energy input and metabolic interactions among the microbial species. In this work, solid electrodes with controlled potentials were placed under mats to study the electron transfer processes between the electrode and the microbial mat. The phototrophic microbial mat was harvested from Hot Lake, a hypersaline, epsomitic lake located near Oroville (Washington, USA). We operated two reactors: graphite electrodes were polarized at potentials of -700 mV Ag/AgCl [cathodic (CAT) mat system] and +300 mV Ag/AgCl [anodic (AN) mat system] and the electron transfer rates between the electrode and mat were monitored. We observed a diel cycle of electron transfer rates for both AN and CAT mat systems. Interestingly, the CAT mats generated the highest reducing current at the same time points that the AN mats showed the highest oxidizing current. To characterize the physicochemical factors influencing electron transfer processes, we measured depth profiles of dissolved oxygen (DO) and sulfide in the mats using microelectrodes. We further demonstrated that the mat-to-electrode and electrode-to-mat electron transfer rates were light- and temperature-dependent. Using nuclear magnetic resonance (NMR) imaging, we determined that the electrode potential regulated the diffusivity and porosity of the microbial mats. Both porosity and diffusivity were higher in the CAT mats than in the AN mats. We also used NMR spectroscopy for high-resolution quantitative metabolite analysis and found that the CAT mats had significantly higher concentrations of osmoprotectants such as betaine and trehalose. Subsequently, we performed amplicon sequencing across the V4 region of the 16S rRNA gene of incubated mats to understand the impact of electrode potential on microbial community structure. In conclusion, these data suggested that variation in the electrochemical conditions under which mats were generated significantly impacted the relative abundances of mat members and mat metabolism.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of inert gases on the reactive high power pulsed magnetron sputtering process of carbon-nitride thin films

The influence of inert gases (Ne, Ar, Kr) on the sputter process of carbon and carbon-nitride (CN{sub x}) thin films was studied using reactive high power pulsed magnetron sputtering (HiPIMS). Thin solid films were synthesized in an industrial deposition chamber from a graphite target. The peak target current during HiPIMS processing was found to decrease with increasing inert gas mass. Time averaged and time resolved ion mass spectroscopy showed that the addition of nitrogen, as reactive gas, resulted in less energetic ion species for processes employing Ne, whereas the opposite was noticed when Ar or Kr were employed as inert gas. Processes in nonreactive ambient showed generally lower total ion fluxes for the three different inert gases. As soon as N{sub 2} was introduced into the process, the deposition rates for Ne and Ar-containing processes increased significantly. The reactive Kr-process, in contrast, showed slightly lower deposition rates than the nonreactive. The resulting thin films were characterized regarding their bonding and microstructure by x-ray photoelectron spectroscopy and transmission electron microscopy. Reactively deposited CN{sub x} thin films in Ar and Kr ambient exhibited an ordering toward a fullerene-like structure, whereas carbon and CN{sub x} films deposited in Ne atmosphere were found to be amorphous. This is attributed to an elevated amount of highly energetic particles observed during ion mass spectrometry and indicated by high peak target currents in Ne-containing processes. These results are discussed with respect to the current understanding of the structural evolution of a-C and CN{sub x} thin films.

36 MATERIALS SCIENCE↗

Morphology of graphene on SiC(0001) surfaces.

Graphene is formed on SiC(000{bar 1}) surfaces (the so-called C-face of the crystal) by annealing in vacuum, with the resulting films characterized by atomic force microscopy, Auger electron spectroscopy, scanning Auger microscopy, and Raman spectroscopy. Morphology of these films is compared with the graphene films grown on SiC(0001) surfaces (the Si-face). Graphene forms a terraced morphology on the C-face, whereas it forms with a flatter morphology on the Si-face. It is argued that this difference occurs because of differing interface structures in the two cases. For certain SiC wafers, nanocrystalline graphite is found to form on top of the graphene.

36 MATERIALS SCIENCE↗

Influence of Austempering Temperature and Time on the Microstructure and Mechanical Properties of Ductile Iron Weldment Using Developed Coated Electrode

Sound welded joints of ductile iron were first made by developing coated electrodes as well as weld procedure. The weldments were then austenitized at 900 °C for 2-h holding time followed by austempering at 300 and 350 °C for three different holding times (1.5, 2 and 2.5 h) at each austempering temperature. The influence of austempering temperature and time on the microstructural and mechanical properties was studied. Microstructural characterization, phase analysis, microhardness and mechanical properties were performed to understand the effect of austempering heat treatment on microstructure, austempering kinetics and mechanical properties of welded joints. In spite of significant variation in microstructures among all the three zones of DI weldment before austempering, the response of both weld metal and HAZ to austempering heat treatment similar to a base metal was noted. However, a significant variation in matrix structures (bainitic ferrite, retained austenite) as well as graphite nodules among the three zones was observed with changing the austempering temperature and holding time. Also, 100% joint efficiency of the welded joints was achieved at both 300 and 350 °C for 2-h holding time. Hardness and charpy impact toughness mostly depended on the volume fraction of retained austenite and carbon content. Based on the results of tensile and charpy impact testing, 350 °C and 2-h holding time could be considered as an optimum austempering condition for ADI weldment.

36 MATERIALS SCIENCE↗

Intrinsic Properties of Individual Constituents of Silicon-Electrolyte Interphase

The stabilization of a solid electrolyte interphase (SEI) is one of the great challenges to utilize superior theoretical capacity (about 3,600 mAh g-1, almost 10 times higher than that of graphite) of a silicon (Si) as an anode in a next-generation advanced lithium-ion battery (LIB). A SEI remains a poorly understood and hardly studied topic relative to the research devoted to battery components due to its intrinsic properties of complexity, reactivity and continuous evolution. However, the SEI plays a key role in prevention of further electrolyte reduction and desolvation of Li+ ions, which is directly related to electrochemical performance, lifetime and safety of batteries. For example, the unstable SEI on a Si anode leads to initial irreversible capacity losses, poor cycling stability and a limited cycle life. 2-4 In this study each 'individual' component of SEI on a Si anode was prepared as a thin film, and the physical, electrochemical, mechanical and structural properties of prepared films were characterized using a variety of analytical equipment including electrochemical impedance spectroscopy, operando X-ray photoelectron spectroscopy, atomic force microscope, Fourier-transform infrared spectroscopy, scanning spreading resistance microscopy and time-of-flight secondary ion mass spectrometry. This study can provide a strong guidance to aid in the development of new electrolytes, additives and binders to stabilize SEI layer on a silicon anode by identifying beneficial components and providing mechanical explanation of a variety of reactions and phenomena in a SEI.

14 SOLAR ENERGY↗

Trends in electrocatalytic activity and stability of transition-metal nitrides

Transition metal nitrides (TMNs) are a class of electrocatalyst support materials similar to transition metal carbides (TMCs) with the advantage of avoiding the issues arising from graphitic carbon surface deposits during synthesis. Inspired by previous studies suggesting that TMCs could be used to reduce Pt loading for the hydrogen evolution reaction (HER), this work explored the feasibility of TMN-supported Pt and Au as HER electrocatalysts. Here this study established a volcano-like trend between electrochemical HER activity and hydrogen-binding energy (HBE) calculated from density functional theory. The Pt/TiN and Au/TiN materials were used to extend knowledge from well-characterized thin films to powder catalysts. In situ X-ray absorption spectroscopy (XAS) measurements provided additional characterization of the Pt/TiN and Au/TiN catalysts under HER conditions. Trends in the electrochemical stability of TMNs were also investigated over a wide range of potentials and pH values, which can be used to guide future studies for TMN-supported electrocatalysts.

58 GEOSCIENCES↗

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

The porous carbon blacks rationally designed by a facile yet efficient NH 3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g -1 at 50 mA g -1 and a superior rate capability of 101 mAh g -1 at 16000 mA g -1 , due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g -1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g -1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. In conclusion, this system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical conductivity in Langmuir-Blodgett films of n-alkyl cyanobiphenyls using current sensing atomic force microscope

We report our studies on the nanoscale electrical conductivity in monolayers of n-alkyl cyanobiphenyl materials deposited on solid surface. Initially, the 8CB, 9CB, and 10CB monolayer films were prepared by the Langmuir technique at air-water interface and characterized by surface manometry and Brewster angle microscopy. The monolayer films were transferred on to solid substrates by the Langmuir-Blodgett (L-B) technique. The 8CB, 9CB, and 10CB monolayer L-B films were deposited on freshly cleaved mica and studied by atomic force microscope (AFM), thereby measuring the film thickness as ∼1.5 nm. The electrical conductivity measurements were carried out on 9CB and 10CB monolayer L-B films deposited onto highly ordered pyrolytic graphite using current sensing AFM. The nanoscale current-voltage (I-V) measurements show a non-linear variation. The nature of the curve indicates electron tunneling to be the mechanism for electrical conduction. Furthermore, analysis of the I-V curve reveals a transition in the electron conduction mechanism from direct tunneling to injection tunneling. From the transition voltage, we have estimated the values of barrier height for 9CB and 10CB to be 0.71 eV and 0.37 eV, respectively. For both 9CB and 10CB, the effective mass of electron was calculated to be 0.021 m{sub e} and 0.065 m{sub e}, respectively. These parameters are important in the design of molecular electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revealing irradiation damage along with the entire damage range in ion-irradiated SiC/SiC composites using Raman spectroscopy

We present that incorporating Raman spectroscopy with transverse lift-out specimens is demonstrated to effectively characterize depth-dependent ion-irradiation damage in nuclear ceramics, such as SiC/SiC composites irradiated up to 1, 10 and 50 displacements per atom (dpa) at 350 °C using 10 MeV Au ions. Raman spectroscopy reveals irradiation-induced structural disorder saturation in both SiC-fiber and SiC-matrix at doses as low as 1 dpa, despite vastly different microstructures, inferred from similar longitudinal optical (LO) and transverse optical (TO) phonon peak shifts. Diamond (D) and graphitic (G) peaks from SiC-fibers disappear under irradiation, revealing irradiation-induced carbon packet loss. The irradiation-induced carbon packet loss is also verified by conducting TEM on same FIB foils used for Raman spectroscopy. In a previous study, the irradiation-induced SiC-fiber shrinkage is known to occur due to carbon packet loss in fibers.

36 MATERIALS SCIENCE↗

Use of a Mylar filter to eliminate vacuum ultraviolet pulse pileup in low-energy x-ray measurements

We describe a method to reduce vacuum ultraviolet (VUV) pulse pileup (PPU) in x-ray pulse-height Silicon Drift Detector (SDD) signals. An Amptek FAST SDD, with C1 (Si 3 N 4 ) window, measures bremsstrahlung emitted from PFRC-2 plasma to extract the electron temperature (T e ) and density (n e ). The C1 window has low transmissivity for photons with energy below 200 eV though will transmit some VUV and soft x-ray photons, which PFRC-2 plasmas abundantly emit. Multi-VUV-photon PPU contaminates the interpretation of x rays with energy > 100 eV, particularly in a low-energy exponential tail. The predicted low transmissivity of ~1 μm thick Mylar [polyethylene terephthalate (PET)] to photons of energy <100 eV led to the selection of Mylar as the candidate filter to reduce VUV PPU. Experiments were conducted on an x-ray tube with a graphite target and on a quasi-Maxwellian tenuous plasma (n e ~ 10 9 cm –3 ) with effective temperatures reaching 1500 eV. A Mylar filter thickness of 850 nm is consistent with the results. The Mylar-filter-equipped SDD was then used on the PFRC-2 plasma, showing a substantial reduction in the low-energy x-ray signal, supporting our hypothesis of the importance of VUV PPU. Here, we describe the modeling and experiments performed to characterize the effect of the Mylar filter on SDD measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A tale of three galaxies: Deciphering THE infrared emission of the spectroscopically anomalous galaxies IRAS F10398+1455, IRAS F21013–0739, and SDSS J0808+3948

The Spitzer/Infrared Spectrograph spectra of three spectroscopically anomalous galaxies (IRAS F10398+1455, IRAS F21013–0739, and SDSS J0808+3948) are modeled in terms of a mixture of warm and cold silicate dust, and warm and cold carbon dust. Their unique infrared (IR) emission spectra are characterized by a steep ∼5–8 μm emission continuum, strong emission bands from polycyclic aromatic hydrocarbon (PAH) molecules, and prominent silicate emission. The steep ∼5–8 μm emission continuum and strong PAH emission features suggest the dominance of starbursts, while the silicate emission is indicative of significant heating from active galactic nuclei (AGNs). With warm and cold silicate dust of various compositions (“astronomical silicate,” amorphous olivine, or amorphous pyroxene) combined with warm and cold carbon dust (amorphous carbon, or graphite), we are able to closely reproduce the observed IR emission of these galaxies. We find that the dust temperature is the primary cause in regulating the steep ∼5–8 μm continuum and silicate emission, insensitive to the exact silicate or carbon dust mineralogy and grain size a as long as a≲1 μm. More specifically, the temperature of the ∼5–8 μm continuum emitter (which is essentially carbon dust) of these galaxies is ∼250–400 K, much lower than that of typical quasars, which is ∼640 K. Moreover, it appears that larger dust grains are preferred in quasars. The lower dust temperature and smaller grain sizes inferred for these three galaxies compared with that of quasars could be due to the fact that they may harbor a young/weak AGNs that is not maturely developed yet.

79 ASTRONOMY AND ASTROPHYSICS↗

Nucleation and growth kinetics for intercalated islands during deposition on layered materials with isolated pointlike surface defects

Theory and stochastic lattice-gas modeling is developed for the formation of intercalated metal islands in the gallery between the top layer and the underlying layer at the surface of layered materials. Our model for this process involves deposition of atoms, some fraction of which then enter the gallery through well-separated pointlike defects in the top layer. Subsequently, these atoms diffuse within the subsurface gallery leading to nucleation and growth of intercalated islands nearby the defect point source. For the case of a single point defect, continuum diffusion equation analysis provides insight into the nucleation kinetics. However, complementary tailored lattice-gas modeling produces a more comprehensive and quantitative characterization. We analyze the large spread in nucleation times and positions relative to the defect for the first nucleated island. We also consider the formation of subsequent islands and the evolution of island growth shapes. The shapes reflect in part our natural adoption of a hexagonal close-packed island structure. As a result, motivation and support for the model is provided by scanning tunneling microscopy observations of the formation of intercalated metal islands in highly-ordered pyrolytic graphite at higher temperatures.

36 MATERIALS SCIENCE↗

High-Performance Low-Cobalt Cathode Materials for Li-ion Batteries

The layer-structured Li[Ni x Co y Mn 1-x-y ]O 2 (NCM) cathode materials have been the best choice for increasing electric vehicle driving distance per charge. The high Ni layered oxide represents successfully commercialized NCM cathodes (such as NCM622 and NCA) in lithium-ion batteries (LIBs) for EV applications due to their high energy density and acceptable cycling stability. However, the price of cobalt, the key element within LIBs for stability, has nearly tripled over the past few years due to increased demand from the cell phone industry. As mentioned in the DOE Funding Opportunity Announcement, the current materials shortage will also cause speculation for a future global shortage. Therefore, to meet the requirement and sustainability of the next-generation long-range and low-cost EVs, developing cathode materials with low-Co content to achieve higher energy density and lower cost is both essential and urgent. The overarching objective of this work is to develop stabilized NCM cathode materials with low Co content (namely LiNi x Co y Mn 1-x-y O 2 , y ≤ 0.04) to meet DOE’s goal of reducing Co loading below 50 mg Wh -1 while maintaining energy density greater than 600 Wh kg -1 based on cathode material. Via various dopings and coatings scalable methods, we explored and enhanced the cycling performance of low-cobalt cathodes. The final obtained NCM cathodes paired with graphite anode aim to deliver batteries with a high initial specific energy density of over 240 Wh kg -1 and a low capacity fading rate of less than 20% in 1000 cycles under a C/3 discharge rate. To accomplish this goal, a multidisciplinary team with several co-investigators has been formed from three organizations: The Pennsylvania State University (PSU), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL). The PI and co-investigators are Dr. Donghai Wang (PI) from PSU with expertise in the synthesis of nanostructured materials and manipulation of interfacial properties of electrochemically active materials, Dr. Jagjit Nanda, with substantial knowledge of and expertise in state-of-the-art cathodes from ORNL, Dr. Chao-Yang Wang with significant experience in advanced cell design and fabrication and cell diagnostics from PSU, and Dr. Chongmin Wang with world-wide known expertise of advance atomic scale characterization of electrode materials from PNNL. Furthermore, this project will leverage and synergistically work with the current DOE-funded programs on battery materials at PSU and ORNL and electrode materials characterization at PNNL. During this funded period, we have accomplished milestones stated as follows: • Scale up production of LiFePO 4 (LFP) coated NCM811 with a production of 300g/batch. Fifteen (≥2 Ah) pouch cells with LFP-coated NCM811 cathode are delivered. Self-evaluated pouch cells in PSU show superior over 80% capacity retention performance even after 1500 cycles at C/3 rate. • Various cations (Al, Ti, Zr, and Mo) substitute cobalt in low-cobalt partially and Co-free cathodes. Their effects on crystal structure and electrochemical behavior are explored. • Phosphate compounds as coating materials represent promising surface protection precursors for low-cobalt cathode materials. Therefore, several metal phosphates were selected for improving the NMC cycling performance and are regarded as effective approaches for a scalable and practical surface protection method. • Production of NCM92, where Nickel content is 92% among transition metals, is scaled up from synthesis to coating and heat treatment procedures. Fifteen 2.7Ah pouch cells with Ti-doped NCM92 cathodes and industrial graphite anode are delivered to Idaho National Lab for testing.

25 ENERGY STORAGE↗

Detrimental Effects of Chemical Crossover from the Lithium Anode to Cathode in Rechargeable Lithium Metal Batteries

The interfacial stability is one of the crucial factors affecting long-term cyclability of lithium (Li) metal batteries (LMBs). While cross contamination (such as Mn+2 crossover from cathode to contaminate graphite anode) phenomena has been well studied in Li ion batteries (LIBs), the similar phenomena has rarely been studied in LMBs. Here, we systematically investigated the cathode failure triggered by the chemical crossover between the electrode pair in rechargeable LMBs. In strong contrast to LIBs, the cathode in LMBs suffers more significant and irreversible capacity fade during cycling and its capacity cannot be fully recovered even when Li metal anode has been replaced in the successive cycling. In-depth characterizations of the cathode surface reveal severe CEI deterioration related to the accumulation of highly resistive polymeric components and lithium fluoride. The soluble decomposition products generated by extensive salt-anion decomposition at Li metal surface can diffuse toward cathode side and result in severe deterioration of cathode as well asseparator surfaces. A polydopamine coated separator with selective Li-ion permeability has been developed to mitigate the detrimental chemical crossover and enhance the cathode stability.

Lee, Hongkyung↗

Metallic 1T Phase, 3d 1 Electronic Configuration and Charge Density Wave Order in Molecular Beam Epitaxy Grown Monolayer Vanadium Ditelluride

We present a combined experimental and theoretical study of monolayer vanadium ditelluride, VTe2, grown on highly oriented pyrolytic graphite by molecular-beam epitaxy. Using various in situ microscopic and spectroscopic techniques, including scanning tunneling microscopy/spectroscopy, synchrotron X-ray and angle-resolved photoemission, and X-ray absorption, together with theoretical analysis by density functional theory calculations, we demonstrate direct evidence of the metallic 1T phase and 3d1 electronic configuration in monolayer VTe2 that also features a (4 × 4) charge density wave order at low temperatures. In contrast to previous theoretical predictions, our element-specific characterization by X-ray magnetic circular dichroism rules out a ferromagnetic order intrinsic to the monolayer. Our findings provide essential knowledge necessary for understanding this interesting yet less explored metallic monolayer in the emerging family of van der Waals magnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Berry phase on nonlinear response of two-dimensional fermions

We develop a theory of nonlinear response to an electric field of two-dimensional (2D) fermions with topologically nontrivial wave functions characterized by the Berry phase Φ n = n π , n = 1 , 2 , ... . In particular, we find that owing to the suppression of backscattering at odd n , Hall field-induced resistance oscillations, which stem from elastic electron transitions between Hall field-tilted Landau levels, are qualitatively distinct from those at even n : Their amplitude decays with the electric field and their extrema are phase shifted by a quarter cycle. The theory unifies the cases of graphene ( n = 1 ) and graphite bilayer ( n = 2 ) with the case of conventional 2D electron gas ( n = 0 ) and suggests another method to probe backscattering in topological 2D systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗