Search NASA⌕ Search

SEARCH · Search NASA

Results for “High angle of attack”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Effect of propeller slipstream on the drag and performance of the engine cooling system for a general aviation twin-engine aircraft

The pressure recovery of incoming cooling air and the drag associated with engine cooling of a typical general aviation twin-engine aircraft was investigated experimentally. The semispan model was mounted vertically in the 40- by 80-Foot Wind Tunnel at Ames Research Center. The propeller was driven by an electric motor to provide thrust with low vibration levels for the cold-flow configuration. It was found that the propeller slipstream reduces the frontal air spillage around the blunt nacelle shape. Consequently, this slipstream effect promotes flow reattachment at the rear section of the engine nacelle and improves inlet pressure recovery. These effects are most pronounced at high angles of attack, that is, climb condition. For the cruise condition those improvements were more moderate.

Katz, J.↗
NASA NTRS1980

Linear analysis of poststall gyrations

The poststall gyrations of a high-performance aircraft are investigated by approximating the equations of motion with a linear mathematical model. Equilibrium poststall spin conditions are determined, which are not limited to small angles or spin rates and are used as reference conditions about which the linear model is developed. As a result, complete coupling between lateral and longitudinal motions is retained. Three aerodynamic models are evaluated using this linear analysis. These models include pure rotary derivatives obtained from VPI&SU stability tunnel, forced-oscillation data obtained from NASA tests, and a combination of the two which separates the unsteady and pure rotary derivatives. Results indicate that this last model gives better predictions of aircraft motion during poststall gyrations at high angles of attack and large sideslip angles. Comparisons are made with full-scale flight test results.

Hreha, M. A.↗
NASA NTRS1980

Aerodynamic side-force alleviator means

An apparatus for alleviating high angle of attack side force on slender pointed cylindrical forebodies such as fighter aircraft, missiles and the like is described. A symmetrical pair of helical separation trips was employed to disrupt the leeside vortices normally attained. The symmetrical pair of trips starts at either a common point or at space points on the upper surface of the forebody and extends along separate helical paths along the circumference of the forebody.

Rao, D. M.↗
NASA NTRS1980

Wind tunnel test results of a new leading edge flap design for highly swept wings, a vortex flap

A leading edge flap design for highly swept wings, called a vortex flap, was tested on an arrow wing model in a low speed wind tunnel. A vortex flap differs from a conventional plain flap in that it has a leading edge tab which is counterdeflected from the main portion of the flap. This results in intentional separation at the flap leading edge, causing a vortex to form and lie on the flap. By trapping this vortex, the vortex flap can result in significantly improved wing flow characteristics relative to conventional flaps at moderate to high angles of attack, as demonstrated by the flow visualization results of this tests.

Runyan, L. J.↗
NASA NTRS1980

Flying qualities design criteria applicable to supersonic cruise aircraft

A comprehensive set of flying qualities design criteria was prepared for use in the supersonic cruise research program. The framework for stating the design criteria is established and design criteria are included which address specific failures, approach to dangerous flight conditions, flight at high angle of attack, longitudinal and lateral directional stability and control, the primary flight control system, and secondary flight controls. Examples are given of lateral directional design criteria limiting lateral accelerations at the cockpit, time to roll through 30 deg of bank, and time delay in the pilot's command path. Flight test data from the Concorde certification program are used to substantiate a number of the proposed design criteria.

Chalk, C. R.↗
NASA NTRS1981

Impact of high-alpha aerodynamics on dynamic stability parameters of aircraft and missiles

The aerodynamic phenomena associated with high angles of attack and their effects on the dynamic stability characteristics of airplane and missile configurations are examined. Information on dynamic effects is limited. Steady flow phenomena and their effects on the forces and moments are reviewed. The effects of asymmetric vortices and of vortex bursting on the dynamic response of flight vehicles are reviewed with respect to their influence on: (1) nonlinearity of aerodynamic coefficients with attitude, rates, and accelerations; (2) cross coupling between longitudinal and lateral directional models of motion; (3) time dependence and hysteresis effects; (4) configuration dependencey; and (5) mathematical modeling of the aerodynamics.

Malcolm, G. N.↗
NASA NTRS1981

Curved-flow, rolling-flow, and oscillatory pure-yawing wind-tunnel test methods for determination of dynamic stability derivatives

The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.

Chambers, J. R.↗
NASA NTRS1980

A nonlinear, discrete-vortex-perturbation method for unsteady lifting-surface problems with edge separations

The nonlinear-discrete vortex method is coupled with a perturbation method to solve the problem of a rectangular wing with small oscillation about high angles of attack. The solution of the problem is based on decoupling the steady and unsteady effects. The steady part of the problem is a nonlinear one and is solved by the nonlinear-discrete vortex method. The unsteady part of the problem is a linear one and is solved directly without any iteration. So far, the developed method is restricted to flat rectangular surfaces with pitching oscillations. Total and distributed loads of several rectangular wings are presented as numerical results.

Kandil, O. A.↗
NASA NTRS1980

Numerical prediction of vortex cores of the leading and trailing edges of delta wings

The purpose of the present paper is to predict the roll-up of the vortex sheets emanating from the leading- and trailing-edges of delta wings with emphasis on the interaction of vortex cores beyond the trailing edge. The motivation behind the present work is the recent experimental data published by Hummel. The Nonlinear Discrete-Vortex method (NDV-method) is modified and extended to predict the leading- and trailing-vortex cores beyond the trailing edge. The present model alleviates the problems previously encountered in predicting satisfactory pressure distributions. This is accomplished by lumping the free-vortex lines during the iteration procedure. The leading- and trailing-edge cores and their feeding sheets are obtained as parts of the solution. The numerical results show that the NDV-method is successful in confirming the formation of a trailing-edge core with opposite circulation and opposite roll-up to those of the leading-edge core. This work is a breakthrough in the high angle of attack aerodynamics and moreover, it is the first numerical prediction done on this problem

Kandil, O. A.↗
NASA NTRS1980

Numerical lifting line theory applied to drooped leading-edge wings below and above stall

A numerical iterative solution to the classical Prandtl lifting-line theory, suitably modified for poststall behavior, is used to study the aerodynamic characteristics of straight rectangular finite wings with and without leading-edge droop. This study is prompted by the use of such leading-edge modifications to inhibit stall/spins in light general aviation aircraft. The results indicate that lifting-line solutions at high angle of attack can be obtained that agree with experimental data to within 20%, and much closer for many cases. Therefore, such solutions give reasonable preliminary engineering results for both drooped and undrooped wings in the poststall region. However, as predicted by von Karman, the lifting-line solutions are not unique when sectional negative lift slopes are encountered. In addition, the present numerical results always yield symmetrical lift distributions along the span, in contrast to the asymmetrical solutions observed by Schairer in the late 1930's. Finally, a series of parametric tests at low angle of attack indicate that the effect of drooped leading edges on aircraft cruise performance is minimal.

Anderson, J. D., Jr.↗
NASA NTRS1980

A status report on NASA general aviation stall/spin flight testing

The NASA Langley Research Center has undertaken a comprehensive program involving spin tunnel, static and rotary balance wind tunnel, full-scale wind tunnel, free flight radio control model, flight simulation, and full-scale testing. Work underway includes aerodynamic definition of various configurations at high angles of attack, testing of stall and spin prevention concepts, definition of spin and spin recovery characteristics, and development of test techniques and emergency spin recovery systems. This paper presents some interesting results to date for the first aircraft (low-wing, single-engine) in the program, in the areas of tail design, wing leading edge design, mass distribution, center of gravity location, and small airframe changes, with associated pilot observations. The design philosophy of the spin recovery parachute system is discussed in addition to test techniques.

Patton, J. M., Jr.↗
NASA NTRS1981

Numerical solution of supersonic viscous flow over blunt delta wings

A general parabolized Navier-Stokes code has been developed to compute the steady supersonic viscous flow around arbitrary body shapes at high angles of attack. A nonorthogonal three-dimensional coordinate frame permits the code to march with solution surfaces which are the most appropriate. The code has been used to calculate the laminar flow over a slab delta wing with 70 deg sweep at angles of attack up to 41.5 deg and Mach numbers of 6.8 and 9.6. The computed shock shapes, surface pressures and heat transfer coefficients are compared with experiment and show agreement.

Tannehill, J. C.↗
NASA NTRS1981

A vortex-lattice method for calculating lifting-surface interference

The interference effect of closely coupled lifting surfaces was investigated. A nonsteady vortex-lattice method was applied to calculate the steady-state and nonsteady lift characteristics of configurations having interference effects. The configurations consist of low-aspect-ratio delta wings, at low and high angles of attack. Leading-edge separation and wake roll-up are simulated by a time-dependent wake-shedding procedure. For steady-state flow conditions, this numerical procedure saves a considerable amount of computer time, compared with iterative methods, and yields the same results. A better understanding of the interference effect can be gained by using the method to study the transient behavior. The nonsteady approach also offers the capability of calculating various nonsteady motions, as is demonstrated in the calculation of the longitudinal damping.

Levin, D.↗
NASA NTRS1980

Consolidation of data base for Army generalized missile model

Data from plume interaction tests, nose mounted canard configuration tests, and high angle of attack tests on the Army Generalized Missile model are consolidated in a computer program which makes them readily accessible for plotting, listing, and evaluation. The program is written in FORTRAN and will run on an ordinary minicomputer. It has the capability of retrieving any coefficient from the existing DATAMAN tapes and displaying it in tabular or plotted form. Comparisons of data taken in several wind tunnels and of data with the predictions of Program MISSILE2 are also presented.

Klenke, D. J.↗
NASA NTRS1982

Experimental and analytical results of tangential blowing applied to a subsonic V/STOL inlet

Engine inlets for subsonic V/STOL aircraft must operate over a wide range of conditions without internal flow separation. Experimental and analytical investigations were conducted to evaluate the effectiveness of tangential blowing to maintain attached flow to high angles of attack. The inlet had a relatively thin lip with a blowing slot located either on the lip or in the diffuser. The height and width of these slots was varied. Experimentally determined flow separation boundaries showed that lip blowing achieved higher angle of attack capability than diffuser blowing. This capability was achieved with the largest slot circumferential extent and either of the two slot heights. Predicted (analytical) separation boundaries showed good agreement except at the highest angles of attack.

Burley, R. R.↗
NASA NTRS1982

Three-dimensional separation and reattachment

The separation of three dimensional turbulent boundary layers from the lee of flight vehicles at high angles of attack is investigated. The separation results in dominant, large scale, coiled vortex motions that pass along the body in the general direction of the free stream. In all cases of three dimensional flow separation and reattachment, the assumption of continuous vector fields of skin friction lines and external flow streamlines, coupled with simple laws of topology, provides a flow grammar whose elemental constituents are the singular points: the nodes, spiral nodes (foci), and saddles. The phenomenon of three dimensional separation may be construed as either a local or a global event, depending on whether the skin friction line that becomes a line of separation originates at a node or a saddle point.

Peake, D. J.↗
NASA NTRS1982

F-16E program overview and wind tunnel/flight correlation

Correlation is defined in three different ways: comparisons of wind tunnel and/or theory with flight results; detailed studies of total vehicle drag from wind tunnel and flight tests; and attempts to understand the fundamental mechanisms of fluid flows associated with aircraft components in specific areas of the flight environment. The F-16E configuration is an outgrowth of studies conducted to produce a refined fighter wing design. Several iterations required to arrive at the combination of wing planform, camber, and twist which gives near optimum lift, drag, and high-angle-of-attack stability. Theoretical analyses were backed up by extensive experimental data to validate the design and are presented

Madsen, A. P.↗
NASA NTRS1982

Water tunnel flow visualization and wind tunnel data analysis of the F/A-18

Six degree of freedom studies were utilized to extract a band of yawing and rolling moment coefficients from the F/A-18 aircraft flight records. These were compared with 0.06 scale model data obtained in a 16T wind tunnel facility. The results, indicate the flight test yawing moment data exhibit an improvement over the wind tunnel data to near neutral stability and a significant reduction in lateral stability (again to anear neutral level). These data are consistent with the flight test results since the motion was characterized by a relatively slo departure. Flight tests repeated the slow yaw departure at M 0.3. Only 0.16 scale model wind tunnel data showed levels of lateral stability similar to the flight test results. Accordingly, geometric modifications were investigated on the 0.16 scale model in the 30x60 foot wind tunnel to improve high angle of attack lateral stability.

Erickson, G. E.↗