Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

First Demonstration of Resonant Pitch-Angle Scattering of Relativistic Electrons by Externally Launched Helicon Waves

Helicon waves (a.k.a whistler waves) satisfying the normal wave-particle cyclotron resonance are observed to limit the growth and maximum energy of relativistic electrons (REs) in low-density Ohmic DIII-D tokamak plasmas. Following the application of helicon waves, pitch-angle scattering of high-energy REs causes an increase in both synchrotron and electron-cyclotron emissions. The hard x-ray emission, a proxy for the RE population, ceases to grow. Energy-resolved hard x-ray measurements also show a striking decrease in the number of high-energy REs (above the resonance at approximately 8MeV) to below the noise floor and an increase in low-energy (∼ 4 MeV) REs. This occurs despite the toroidal electric field remaining high enough to drive exponential RE growth in the absence of helicon waves. Furthermore, these results open new directions for limiting the maximum energy of RE populations in laboratory and fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of heteroclinic bifurcations in resistive magnetohydrodynamic simulations of the plasma response to resonant magnetic perturbations

A class of topological magnetic island bifurcations that has not previously been observed in toroidal plasmas is described. Increasing an externally applied three-dimensional magnetic field in resistive magnetohydrodynamic simulations results in the asymmetric elongation of resonant island flux surfaces followed by a sequence of heteroclinic bifurcations. Here, these bifurcations produce new sets of hyperbolic-elliptic fixed points as predicted by the Poincaré-Birkoff fixed point theorem. Field line calculations verify that the new fixed points do not connect to those of the prebifurcated islands as required for heteroclinic bifurcations on a torus with winding numbers composed of common integer factors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spontaneous and explicit parity-time-symmetry breaking in drift-wave instabilities

A method of parity-time- (PT) symmetry analysis is introduced to study the high-dimensional, complicated parameter space of drift-wave instabilities. Here, we show that spontaneous PT-symmetry breaking leads to the ion temperature gradient instability of drift waves, and the collisional instability is the result of explicit PT-symmetry breaking. A new unstable drift wave induced by finite collisionality is identified. It is also found that gradients of ion temperature and density can destabilize the ion cyclotron waves when PT symmetry is explicitly broken by a finite collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient electron cyclotron current drive regime for plasma current start-up in fusion reactors

We report an accessibility enhanced efficient fundamental X-mode electron cyclotron heating (ECH) current start-up regime was identified for a reactorlike toroidal magnetic field range which has more than 100 times higher current drive efficiency compared to more conventional ECH methods for the relevant start-up temperature range. Very high current drive efficiency is possible due to the strong cyclotron interaction only with unidirectional passing electrons constrained by the wave accessibility conditions. This efficient electron cyclotron current drive regime may help facilitate the design of innovative economical solenoid-free tokamak fusion reactor systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of potential vorticity staircase evolution and step mergers in a reduced model of beta-plane turbulence

A two-field model of potential vorticity (PV) staircase structure and dynamics relevant to both beta-plane and drift-wave plasma turbulence is studied numerically and analytically. The model evolves averaged PV whose flux is both driven by and regulates a potential enstrophy field, ε. The model employs a closure using a mixing length model. Its link to bistability, vital to staircase generation, is analyzed and verified by integrating the equations numerically. Long-time staircase evolution consistently manifests a pattern of metastable quasiperiodic configurations, lasting for hundreds of time units, yet interspersed with abrupt ( Δt << 1 ) mergers of adjacent steps in the staircase. The mergers occur at the staircase lattice defects where the pattern has not completely relaxed to a strictly periodic solution that can be obtained analytically. Other types of stationary solutions are solitons and kinks in the PV gradient and ε-profiles. The waiting time between mergers increases strongly as the number of steps in the staircase decreases. This is because of an exponential decrease in interstep coupling strength with growing spacing. The long-time staircase dynamics is shown numerically be determined by local interaction with adjacent steps. In conclusion, mergers reveal themselves through the explosive growth of the turbulent PV flux, which, however, abruptly drops to its global constant value once the merger is completed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of the Drift-Wave Instability at Arbitrary Collisionality

A numerically efficient framework that takes into account the effect of the Coulomb collision operator at arbitrary collisionalities is introduced. Such a model is based on the expansion of the distribution function on a Hermite-Laguerre polynomial basis to study the effects of collisions on magnetized plasma instabilities at arbitrary mean-free path. Focusing on the drift-wave instability, we show that our framework allows retrieving established collisional and collisionless limits. At the intermediate collisionalities relevant for present and future magnetic nuclear fusion devices, deviations with respect to collision operators used in state-of-the-art turbulence simulation codes show the need for retaining the full Coulomb operator in order to obtain both the correct instability growth rate and eigenmode spectrum, which, for example, may significantly impact quantitative predictions of transport. In conclusion, the exponential convergence of the spectral representation that we propose makes the representation of the velocity space dependence, including the full collision operator, more efficient than standard finite difference methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reversal of Simple Hydrogenic Isotope Scaling Laws in Tokamak Edge Turbulence

The role of nonadiabatic electrons in regulating the hydrogenic isotope-mass scaling of gyrokinetic turbulence in tokamak fusion plasmas is assessed in the transition from ion-dominated core transport regimes to electron-dominated edge transport regimes. We propose a new isotope-mass scaling law that describes the electron-to-ion mass-ratio dependence of turbulent ion and electron energy fluxes. Here, the massratio dependence arises from the nonadiabatic response associated with fast electron parallel motion and plays a key role in altering—and in the case of the DIII-D edge, favorably reversing—the naive gyro-Bohm scaling behavior. In the reversed regime hydrogen energy fluxes are larger than deuterium fluxes, which is the opposite of the naive prediction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold Heat-Flux Reduction by Near-Resonant Energy Transfer

Near-resonant energy transfer to large-scale stable modes is shown to reduce transport above the linear critical gradient, contributing to the onset of transport at higher gradients. This is demonstrated for a threshold fluid theory of ion temperature gradient turbulence based on zonal-flow-catalyzed transfer. Furthermore, the heat flux is suppressed above the critical gradient by resonance in the triplet correlation time, a condition enforced by the wave numbers of the interaction of the unstable mode, zonal flow, and stable mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of Magnetic Field Configuration on Heat Transport in Stellarators and Heliotrons

We assess the magnetic field configuration in modern fusion devices by comparing experiments with the same heating power, between a stellarator and a heliotron. The key role of turbulence is evident in the optimized stellarator, while neoclassical processes largely determine the transport in the heliotron device. Gyrokinetic simulations elucidate the underlying mechanisms promoting stronger ion scale turbulence in the stellarator. Similar plasma performances in these experiments suggests that neoclassical and turbulent transport should both be optimized in next step reactor designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visualization of Fast Ion Phase-Space Flow Driven by Alfvén Instabilities

Fast ion phase-space flow, driven by Alfven eigenmodes (AEs), is measured by an imaging neutral particle analyzer in the DIII-D tokamak. The flow firstly appears near the minimum safety factor at the injection energy of neutral beams, and then moves radially inward and outward by gaining and losing energy, respectively. The flow trajectories in phase space align well with the intersection lines of the constant magnetic moment surfaces and constant E – (ω/n)P ζ surfaces, where E, P ζ are energy and toroidal canonical momentum of ions; ω and n are angular frequencies and toroidal mode numbers of AEs. It is found that the flow is so destructive that the thermalization of fast ions is no longer observed in regions of strong interaction. Here, the measured phase-space flow is consistent with nonlinear hybrid kinetic-magnetohydrodynamics simulation. Calculations of the relatively narrow phase-space islands reveal that fast ions must transition between different flow trajectories to experience large-scale phase-space transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Validation of a Kinetic Ballooning Mode in High-Performance High-Bootstrap Current Fraction Fusion Plasmas

We report the observation of a set of coherent high frequency electromagnetic fluctuations that leads to a turbulence induced self-regulating phenomenon in the DIII-D high bootstrap current fraction plasma. The fluctuations have frequency of 130~220kHz, the poloidal wave length and phase velocity are 16~30 m -1 and ~30 km/s, respectively in the outboard midplane with the estimated toroidal mode number n~5- 9. The fluctuations are located in the internal transport barrier (ITB) region at large radius and are experimentally validated to be kinetic ballooning modes (KBM). Furthermore, quasilinear estimation predicts the KBM to be able to drive experimental particle flux and non-negligible thermal flux, suggesting its significant role in regulating the ITB saturation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tokamak Plasmas with Density up to 10 Times the Greenwald Limit

Current-carrying, toroidal laboratory plasmas typically cannot be sustained with an electron density above the empirical Greenwald limit. Presented here are tokamak experiments in the Madison Symmetric Torus with a density up to an unprecedented level about ten times this limit. This is thought to be made possible in part by a thick, stabilizing, conductive wall, and a high-voltage, feedback-controlled power supply driving the plasma current. The radial profile of the toroidal current flattens around twice the limit, without the edge collapse routinely observed in other experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficiency and Physical Limitations of Adiabatic Direct Energy Conversion in Axisymmetric Fields

We describe and analyze a new class of direct energy conversion schemes based on the adiabatic magnetic drift of charged particles in axisymmetric magnetic fields. The efficiency of conversion as well as the geometrical and dynamical limitations of the recoverable power are calculated. The geometries of these axisymmetric field configurations are suited for direct energy conversion in radiating advanced aneutronic reactors and in advanced divertors of deuterium-tritium tokamak reactors. The E × B configurations considered here do not suffer from the classical drawbacks and limitations of thermionic and magnetohydrodynamic high-temperature direct energy conversion devices.

30 DIRECT ENERGY CONVERSION↗

Real-Time and Adaptive Reservoir Computing With Application to Profile Prediction in Fusion Plasma

Nuclear fusion is a promising alternative to address the problem of sustainable energy production. The tokamak is an approach to fusion based on magnetic plasma confinement, constituting a complex physical system with many control challenges. Here we study the characteristics and optimization of reservoir computing (RC) for real-time and adaptive prediction of plasma profiles in the DIII-D tokamak. Our experiments demonstrate that RC achieves comparable results to state-of-the-art (deep) convolutional neural networks (CNNs) and long short-term memory (LSTM) models, with a significantly easier and faster training procedure. This efficient approach allows for fast and frequent adaptation of the model to new situations, such as changing plasma conditions or different fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Developments and Challenges in the Design of the ITER DRGA

We report the ITER Diagnostic Residual Gas Analyzer (DRGA) will measure the distribution of gas species, i.e., deuterium (D), tritium (T), and impurities, in the divertor exhaust stream and in the plasma periphery, with time resolution relevant to fusion plasma–wall particle dynamics. The uniqueness of the DRGA, over previous implementations of plasma dynamics residual gas analysis, is an integrated approach, combining mass and low-temperature plasma-activated optical spectroscopy, in a differentially pumped analysis station. A further unique feature of the ITER divertor-specific DRGA is an ~8-m separation of the analysis station from the sampled pumping duct, while still maintaining a ~1-s response time for hydrogen isotopic concentrations. ITER DRGA final design activities are strongly benefiting from testing of prototypical DRGA components and methods on present fusion devices, most currently on JET and W7-X. DRGA systems are implemented on both these devices and include sensors (and pumping methods) that are directly relevant to the ITER DRGA design. The recent JET-DTE2 campaign has provided the first experience on operating the combined ITER DRGA sensors with D-T plasmas. While enhancing system design for ITER, this experience on operating devices has also revealed additional engineering challenges, which further guide the continuing final design project. Meanwhile, the recent determination that the ITER DRGA, with slight optimization, will resolve the helium isotopes well enough to support an ITER pre-DT, He-3-based heating scheme, has greatly increased ITER Research Program interest in the DRGA and its implementation well ahead of the DT phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A software package for plasma facing component analysis and design: the Heat flux Engineering Analysis Toolkit (HEAT)

The engineering limits of plasma facing components (PFCs) constrain the allowable operational space of tokamaks. Poorly managed heat fluxes that push the PFCs beyond their limits not only degrade core plasma performance via elevated impurities, but can also result in PFC failure due to thermal stresses or melting. Simple axisymmetric assumptions fail to capture the complex interaction between 3D PFC geometry and 2D or 3D plasmas. This results in fusion systems that must either operate with increased risk or reduce PFC loads, potentially through lower core plasma performance, to maintain a nominal safety factor. High precision 3D heat flux predictions are necessary to accurately ascertain the state of a PFC given the evolution of the magnetic equilibrium. A new code, the Heat flux Engineering Analysis Toolkit (HEAT), has been developed to provide high precision 3D predictions and analysis for PFCs. HEAT couples many otherwise disparate computational tools together into a single open source python package. Magnetic equilibrium, engineering CAD, finite volume solvers, scrape off layer plasma physics, visualization, high performace computing, and more, are connected in a single web-based user interface. Linux users may use HEAT without any software prerequisites via an appImage. This manuscript introduces HEAT, discusses the software architecture, presents first HEAT results, and outlines physics modules in development.

divertor physics↗

AE3D

AE3D solves for the shear Alfven eigenmodes and eigenfrequencies in a torodal magnetic fusion confinement device. The configuration can be either 2D (e.g. tokamak, reversed field pinch) or 3D (e.g. stellarator, helical reversed field pinch, tokamak with ripple). The equations solved are based on a reduced MHD model and sound wave coupling effects are not currently included.

Spong, DonaldA↗