Search NASA⌕ Search

SEARCH · Search NASA

Results for “MICROMETEOROID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Signatures of the Impact Histories of Comets and Asteroids within Shocked Phyllosilicates, Enstatite, and Forsterite Minerals

Throughout the lifetime of the solar system, collisions between small bodies and impacts on the surfaces of small bodies in the Kuiper Belt have occured at speeds of 1.5 - 3 km s-1 (Stern, Astron J 124, 2002), typically at 1-10 km s-1 between Trojan asteroids (Marzari et al. Icarus 119, 1996), and at ~4-8 km s-1 in the asteroid belt (Farinella and Davis, Icarus 97, 1992). Shock effects recorded by minerals composing these bodies are one observable legacy of this evolutionary process, whether they were generated through large collisions, micrometeoroid impacts, or processing during the formation of the solar system. Shock metamorphism has been observed in cometary samples such as those from Comet Wild 2 (Keller et al. Geochim. Cosmochim. Acta 72, 2008; Tomeoka et al. MAPS 43, 2008; Jacobs et al. MAPS 44, 2009) as well as in forsterites and enstatites found in meteorites (McCausland et al. AGU, 2010). To investigate the observable signatures of these processes, we have conducted a suite of impact experiments at NASA Johnson Space Center's Experimental Impact Laboratory (EIL). Target materials included Mg-rich forsterite (olivine), Mg-rich enstatite (orthopyroxene), and antigorite and lizardite (both in the serpentine group of phyllosilicates). Alumina-ceramic spheres were launched at speeds ranging from ~2.0 - 2.6 km s-1 into targets at temperatures from 25degC to -100degC. Recent advancements have been made in cooling targets in the EIL's vertical gun. Liquid nitrogen (LN2) is fed through a unique jacket surrounding the metallic sample container to chill the samples. Real-time values from temperature sensors attached to the sample holder are converted to target temperature through predetermined regression relationships, providing the target temperature at the time of impact with sub-degree accuracy. Fourier Transform Infrared Spectrometer (FTIR) data in the near to mid-IR will be presented, along with trends relating temperature and velocity with impact speeds, and thereby peak shock stresses experienced by the impacted minerals.

Lederer, Susan M.↗

Atomic Oxygen Interactions and the Design of MISSE-9 and MISSE-10 Experiments

Spacecraft in low Earth orbit (LEO) are subjected to harsh environmental conditions, including radiation (cosmic rays, ultraviolet, x-ray, and charged particle radiation), micrometeoroids and orbital debris, temperature extremes, thermal cycling, and atomic oxygen (AO). These environmental exposures can result in erosion, embrittlement and optical property degradation, threatening spacecraft performance and durability. While all of these environmental exposures can cause degradation to spacecraft components, AO is a particularly serious structural, thermal, and optical threat, to exterior oxidizable spacecraft components.

Atomic Oxygen↗

Review of Habitable Softgoods Inflatable Design, Analysis, Testing, and Potential Space Applications

Inflatable space structures have the potential to significantly reduce the required launch volume of large crewed pressure vessels for space exploration missions. Mass savings can also be achieved via the use of high specific strength softgoods materials, and the reduced design penalty from launching the structure in a densely packaged state. Inflatable softgoods structures have been investigated since the late 1950's, and several major development programs at NASA and in industry have helped advance the state-of-the-art in this technology area. This paper discusses the design, analysis, structural testing, and potential applications for inflatable softgoods structures. In particular, this paper will discuss the design of the multi-layer softgoods shell (inner layer, bladder, structural restraint layer, micrometeoroid orbital debris protection layers, thermal insulation layers, and atomic oxygen layer (for low earth orbit) and the results of material and module-level testing that has been conducted over the past two decades at NASA. Finally, the current utilization of expandable spacecraft structures is discussed, as well as potential future applications including airlocks and habitats on the Lunar Orbital Platform-Gateway, and the surface of the Moon and Mars.

Valle, Gerard↗

A Preliminary Look at Space Weathering on 101955 Bennu: A Radiative Tranfer Modeling Perspective

The surfaces of airless bodies, such as 101955 Bennu, are vulnerable to micrometeoroids, high-energy particles, and solar wind particles. As a result, material on the surface of these bodies experience physical and chemical changes that are collectively known as space weathering. Space weathering processes result in the production of sub-micronsized particles called submicroscopic particles. There are two types of submicroscopic particles, nanophase (<33 nm in size) and microphase particles (>33 nm in size). Studies of lunar samples show that nanophase particles occur within the glassy rims that surround grains and agglutinates. In contrast, microphase iron particles occur only within agglutinates. Another important difference between these two particles is that nanophase and microphase particles affect visible to near-infrared reflectance spectra differently. From lunar samples, the presence of nanophase particles in a regolith causes the regolith’s reflectance spectrum to darken and redden, whereas the presence of microphase particles in a regolith causes it to only darken. In addition, the reflectance spectra of submicroscopic particle-bearing regolith exhibit weakened absorptions and spectral features. Lantz et al. (2018) found that these particles also affect spectral curvature [8]. By taking advantage of these spectral characteristics, with global spectral data, it is possible to model the nanophase and microphase particle abundances across a planetary surface resulting in the production of global space weathering maps.

Trang, D.↗

Consequences of MMOD Penetrations on the International Space Station

Risk from micrometeoroid and orbital debris (MMOD) impacts on space vehicles is often quantified in terms of the probability of no penetration (PNP). However, for large spacecraft, especially those with multiple compartments, a penetration may have a number of possible outcomes. The extent of the damage (diameter of hole, crack length or penetration depth), the location of the damage relative to critical equipment or crew, crew response, and even the time of day of the penetration are among the many factors that can affect the outcome. For the International Space Station (ISS), a Monte-Carlo style software code called Manned Spacecraft Crew Survivability (MSCSurv) is used to predict the probability of several outcomes of an MMOD penetration—broadly classified as loss of crew (LOC), crew evacuation (Evac), loss of escape vehicle (LEV), and nominal end of mission (NEOM). By generating large numbers of MMOD impacts (typically in the billions) and tracking the consequences, MSCSurv allows for the inclusion of a large number of parameters and models as well as enabling the consideration of uncertainties in the models and parameters. MSCSurv builds upon the results from NASA’s Bumper software (which provides the probability of penetration and critical input data to MSCSurv) to allow analysts to estimate the probability of LOC, Evac, LEV, and NEOM. This paper provides an overview of the methodology used by NASA to quantify LOC, Evac, LEV, and NEOM with particular emphasis on describing in broad terms how MSCSurv works and its capabilities and most significant models.

Evans, Hilary J.↗

Extravehicular Activity Micormeteoroid and Orbital Debris Risk Assessment Methodology

A well-known hazard associated with exposure to the space environment is the risk of vehicle failure due to an impact from an micrometeoroid and orbital debris (MMOD) particle. Among the vehicles of importance to NASA is the extravehicular mobility unit (EMU) “spacesuit” used while performing a US extravehicular activity (EVA). An EMU impact is of great concern as a large leak could prevent an astronaut from safely reaching the airlock in time resulting in a loss of life. For this reason, a risk assessment is provided to the EVA office at the Johnson Space Center (JSC) prior to certification of readiness for each US EVA. To assess the risk of failure, a detailed finite element model (FEM) of the EMU has been created which has regions for the various shielding configurations. Each shielding configuration is based on the layers and materials over the innermost bladder layer that maintains the acceptable atmospheric environment for the astronaut. Ballistic limit equations (BLE) for each shielding configuration have been determined from hypervelocity impact testing of samples of the EMU layup.

Hoffman, K. D.↗

Modular Damage Detection for Expandable and Inflatable Structures

NASA has identified potential damage from micrometeoroid and orbital debris (MMOD) impacts as a primary threat to Commercial Crew Program vehicles. The International Space Station (ISS) and extraterrestrial habitats also exhibit the risk of damage caused by MMODs. Currently no integrated in-situ or real-time health monitoring damage detection system is being used for expandable and inflatable structures. A novel, modular damage detection system design that incorporates interchangeable and replaceable sensory panels in a foldable architecture is described. The design implements technologies that provide for situational awareness, self-configuration, and damage detection and localization. The system is applicable for the new Gateway and surface and ground support infrastructure

Lewis, Mark E.↗

Durability of Polymers in the Space Environment

Spacecraft in low Earth orbit (LEO) are subjected to harsh environmental conditions, including radiation (cosmic rays, ultraviolet, x-ray, and charged particle radiation), micrometeoroids and orbital debris, temperature extremes, thermal cycling, and atomic oxygen (AO). These environmental exposures can result in erosion, embrittlement and optical property degradation, threatening spacecraft performance and durability. While all of these environmental exposures can cause degradation to spacecraft components, AO is a particularly serious structural, thermal, and optical threat, to exterior oxidizable spacecraft materials, such as polymers. To further our understanding of AO erosion and radiation embrittlement of spacecraft materials, NASA Glenn Research Center has developed and flown a series of experiments as part of the Materials International Space Station Experiment (MISSE) missions on the exterior of the International Space Station (ISS). In continuing these studies, three new Glenn experiments have accepted for flight on the new ISS MISSE-Flight Facility (MISSE-FF). The Polymers and Composites Experiment (PCE) is being flown as part of the MISSE-9 inaugural mission of MISSE-FF. The Polymers and Composites Experiment-2 (PCE-2) and Polymers and Composites-3 Experiment (PCE-3) are being flown as part of the MISSE-10 and MISSE-12 missions, respectively. This presentation provides an overview of the Glenn's three MISSE-FF flight experiments including the objectives and initial spaceflight results.

spaceflight↗

Evaluation of Cyclo Olefin Polymer as Sabot Material for High-Density Projectiles

Assuring the integrity of spacecraft and its occupants are a priority in the field of space exploration. Micrometeoroids and orbital debris are one of the primary threats that affect spacecraft materials due to the high kinetic energies involved with hypervelocity impacts. Improvement of projectile launching capabilities prompts the investigation of adequate materials for the manufacturing of sabots able to carry high-density projectiles without catastrophic failure. Polycarbonate has been the chosen material by the Hypervelocity Team at White Sands Test Facility for sabots on the 0.50 caliber launcher; however, there is a material constraint when the projectile becomes significantly dense and the inertial stresses surpass the yield strength of the sabot material. This research proposes a new polymer material for manufacturing sabots, known as cyclo olefin polymer (COP) with the purpose of successfully shooting the intended high-density projectiles. In this investigation, both polycarbonate and COP were analyzed using tensile and impact testing to observe the differences in their mechanical properties. The experimental details along with the detailed characterization of the materials are presented.

Tarango, Estebanne↗

NASA Meteoroid Engineering Model (MEM) Version 3

The Meteoroid Engineering Model (MEM) version 3 is NASA’s most current and accurate model of the meteoroid environment. MEM 3 supersedes all previous versions of MEM, including MEM Release 2.0 (MEMR2), MEM Release 1.0c (MEMR1c), and previously internally controlled and released versions of MEMCxP v2.0 and LunarMEM v2.0. Earlier versions of MEM superseded older models of the meteoroid environment such as the Grün model and its derivative, Technical Memo 4527 (hereafter abbreviated as TM 4527) [1]. Prior to the establishment of the NASA Meteoroid Environment Office (MEO), NASA’s meteoroid environment models relied on a simple empirical expression derived from [2], as described in [3] and later in [1]. This expression describes the meteoroid flux incident on a flat plate near 1 au. TM 4527 assumes an isotropic environment, making the orientation of the plate irrelevant [4]. The flux was combined with scale factors to account for the reduction in flux occurring when the Earth shields the spacecraft from a portion of the meteoroid environment and the enhancement in flux due to the focusing effect of Earth’s gravitational field. TM 4527 also introduced a crude, piecewise meteoroid speed distribution with an average velocity of 19 km/s for an orbiting spacecraft based on [5]. Finally, TM 4527 assumed a three-step density distribution in which dust particles smaller than 10−6 g have a density of 2 g/cu cm, micrometeoroids between 10−6 g and 0.01 g have a density of 1 g/cu cm, and meteoroids larger than 0.01 g have a density of 0.5 g/cm3. Thus, the meteoroid model presented in TM 4527 was assembled from multiple independent sources. The model of TM 4527 was also used for years in Space Station risk assessments, and is described in Space Station Specification (SSP) 30425.

Moorhead, A. V.↗

Simulated Galactic Cosmic Ray and Solar Particle Event Radiation Effects on Inflatable Habitat, Composite Habitat, Space Suit and Space Hatch Cover Materials

The effect of particle radiation representative of galactic cosmic ray (GCR) and solar particle event (SPE) radiation on polymeric materials used in deep space mission environments is largely unknown. For NASA, this uncertainty represents an unquantified mission risk. To better quantify this risk, selected polymeric materials used in inflatable habitats, composite habitats, space suits and space hatch covers are irradiated at the Brookhaven National Laboratory, after which changes in relevant end-use properties are measured. The irradiated materials are lightweight candidates having critical functions such as ripstops, permeation barriers, micrometeoroids and orbital debris (MMOD) shield layers and restraint layers.The effect of several types of particle radiation are evaluated. To evaluate GCR effects, high-energy (1 GeV) protons and iron nucleons are used. To evaluate SPE effects, intermediate energy (ca. 20 to 40 MeV) protons are used. In addition, two mission scenarios are evaluated: a Mars mission cycle (space suit materials) and a worst-case 50 year deep space mission cycle (all materials). Lastly, a common polymer (high density polyethylene (HDPE)) is subjected to accelerated aging and radiation exposure to determine if a combined physical aging/radiation effect exists.The level of radiation induced property change observed in this study after exposure of polymers to kGy levels of intermediate and high energy ions is often significant and is quantitatively comparable to the level of change reported for similar materials exposed to MGy levels of low energy protons, electrons and gamma-radiation. This suggests that intermediate and high energy ions encountered in space may cause more damage than low energy forms of radiation due to displacement and linear energy transfer (LET) effects. For these reasons, it is recommended that final approval for mission use be made by the appropriate NASA material and structural review boards to ensure radiation induced changes in candidate materials do not interfere with their engineering function in the intended mission application. Since the materials tested in this report received doses exceeding actual mission doses, the results are considered conservative as a first approximation. However, caution must be exercised when evaluating radiation effects in the absence of other secondary factors know to contribute to degradation. In the addition to radiation type and energy, the results presented in this study show that molecular composition, orientation, stress and physical aging can also contribute to or influence degradation. Other factors such as polymer formulation, secondary radiation effects, stress, exposure to elevated temperature, thermal cycling and exposure to ozone were not investigated here, but must be considered when performing a comprehensive evaluation of a polymeric materials suitability for service in a space radiation environment. Only when the total sum of these factors operating in concert with radiation are accounted for, can accurate assessments of a material's suitability be made.

Jess M. Waller↗

The Role of NASA Engineering & Safety Center (NESC) in Advancing NASA's Earth Science Missions (Past, Present, and Future)

The NASA Engineering & Safety Center (NESC) was established in 2003 to provide an independent technical resource for the resolution of challenging technical problems (through the use of studies, analysis, tests, etc.). Since its inception, NESC has completed nearly 1000 technical assessments for NASA’s Human Exploration and Operation Mission Directorate (HEOMD), Science Mission Directorate (SMD), Space Technology Mission Directorate (STMD), and Aeronautics Research Mission Directorate (ARMD). Of the SMD related assessments, several were for the resolution of technical problems, analysis, or studies related to NASA’s Earth science missions in various phases of the project from design to operation. Some of the recent examples of NESC technical support for NASA (or NOAA) Earth science missions have been for: Soil Moisture Active Passive (SMAP), Deep Space Climate Observatory (DSCOVR), Cyclone Global Navigation Satellite System (CYGNSS), Ice, Cloud, and Land Elevation Satellite (ICESat-II), Joint Polar Satellite System (JPSS), and the soon to be launched collaboration mission with India, NASA-ISRO Synthetic Aperture Radar (NISAR). In this paper, we outline some of the technical challenges faced by these Earth science missions and describe how NESC contributed to their resolution. The case studies cover a wide range of disciplines involving space lidars, radars, electronics, attitude control systems, as well as Micrometeoroid Orbital Debris (MMOD) risk assessment impact to NASA missions. The efforts include strategies for risk mitigation, technical resolution of challenging problems, and failure root cause investigations combined with lessons learned reports to advance discipline knowledge, enhance NASA capabilities, and avoid future problems.

NASA↗

MISSE-Flight Facility Polymers and Composites Experiment 1-4 (PCE 1-4)

Spacecraft in low Earth orbit (LEO) are subjected to harsh environmental conditions, including radiation (cosmic rays, ultraviolet (UV), x-ray and charged particle radiation), micrometeoroids and orbital debris, temperature extremes, thermal cycling, and atomic oxygen (AO). These environmental exposures can result in erosion, embrittlement and optical property degradation of susceptible materials threatening spacecraft performance and durability. To increase our understanding of effects such as AO erosion and radiation induced embrittlement of spacecraft materials, NASA Glenn Research Center has developed a series of experiments that are flown as part of the Materials International Space Station Experiment (MISSE) missions on the exterior of the International Space Station (ISS). These experiments have provided critical space environmental durability data such as AO erosion data of polymers and composites, and radiation induced mechanical property degradation of spacecraft insulation materials, after long term space exposure. In continuing these studies, four Glenn experiments have been flown on ISS’s MISSE-Flight Facility (MISSE-FF). These experiments are the Polymers and Composites Experiment-1 (PCE-1) flown as part of the inaugural MISSE-9 mission, the PCE-2 flown as part of the MISSE-10 mission, the PCE-3 being flown as part of the MISSE-12 mission, and the PCE-4 being flown as part of the MISSE-13 mission. This paper provides an overview of space environmental effects on spacecraft materials and Glenn’s PCE 1-4 MISSE-FF experiments.

Atomic oxygen↗

Bio-inspired Surface Structures to Mitigate Interfacial Particle Adhesion and Erosion - A Review

Lunar dust known as regolith is a huge challenge for lunar exploration missions. Formed over millennia by a complex process involving impacts of meteoroids and micrometeoroids on the lunar surface, lunar dust is porous, highly abrasive with sharp jagged edges, chemically reactive, electrostatically charged and sometimes magnetic. The chemical composition and thickness of the dust layer also varies in different regions of the lunar surface. From samples obtained by previous lunar missions, the average particle size is below 100 microns. This dust has the tendency to strongly adhere to any exposed surfaces, and often degrades the material functionality to eventually cause failure. Any material on the lunar surface is also subject to harsh temperature cycles ranging from -178 ̊C to + 123 ̊C and extreme ultraviolet radiation. While on the lunar surface, different classes of materials would be required for different applications. Advanced materials have been and will be used throughout the lunar lander, habitat, and mission equipment. Examples include: polymeric materials for astronaut protective clothing; metals and ceramics for the lunar lander legs and habitats, and excavating equipment; and semiconductors for solar panels and on-board electronics. In all these applications, the surfaces of the materials are expected or understood to be exposed to the extreme lunar environment condition that includes the regolith dust. During the Apollo missions, the dust clung to and abraded the astronaut’s suits, degraded seals, optics, clogged sensors and reduced performance of thermal radiators. The lunar dust adheres to the surface by various mechanisms, which include electrostatic and Coulombic interactions, Van-der-Waals forces, magnetic forces, mechanical interlocking, chemical bonding and donor-acceptor interactions. There are three primary strategies for developing technologies to minimize the lunar dust adhesion: active, passive and a combination of active and passive. In the active approach, an external energy is needed to prevent or remove particles from collecting on the surface. Mechanically powered brushes and electrodynamic dust screens are two examples. In the passive approach, no external power is needed, and the material surface properties are able to mitigate dust adhesion. A well-known example of this strategy is the low work function coatings for non-stick surfaces. In most cases a combination of active and passive methods might be needed to optimally manage the lunar regolith. The passive method is significantly more attractive as it does not require any external power or an additional control subsystem. These approaches optimize the mission payload and reduce risk. Surface modification to minimize the dust adhesion is thus very important to lunar missions. Here, naturally evolved surface structures might provide guidance for solutions. There are several factors that have to be considered for minimizing particle adhesion to a surface. These include the substrate material properties, surface topography, chemistry, and the characteristics of the adhering particles. When engineering a surface, the substrate material chosen would be dependent on the needs of the application. Tailoring the surface microstructure or chemistry opens up more possibilities for its optimal utilization

Lunar Dust↗

Residual Strength of Hypervelocity Impacted Silica

Windows in the International Space Station are subjected to on-going micrometeoroid and orbital debris damage (MMOD). The reliability of the windows is being ensured by monitoring of damage, life prediction, and measurement of the residual strength of man-made and natural hypervelocity impact damage. The residual strength of man-made craters and MMOD craters harvested from space shuttle windows were used to estimate strength as a function of damage dimensions and thereby derive design allowables for U.S. and Russian fused silicas used in the ISS. US and Russian silica exhibit similar mechanical properties. An effect of impact angle is apparent, with 0o impacts exhibiting the lowest strength for Russian quartz-derived silica. The crater morphology for fused silica consists of a central pit, crush zone, shallow rings and radial cracks dividing petaloids. Morphology of alkaline glass is different from than that of fused silica, with a more distinct pit and pulverized region, and bell and tail-like features below the pit.

Silicia↗

Clementine Engineering Experiments Program.

Spacecraft must survive and operate reliably in the space environment for long periods of time. Radiation, temperature variations, spacecraft charging, surface contamination, and micrometeoroids/space debris all present environmental challenges to spacecraft missions. The environmental issues associated with these effects require in-situ space experiments to properly quantify the environment and its effects. To obtain data on specific microelectronic and sensor systems in the space environment, several engineering experiments were developed for the Clementine spacecraft and the Clementine lunar transfer booster or Interstage Adapter Satellite (ISAS). These platforms allowed testing of advanced spacecraft microelectronic and sensor devices in a lunar transfer orbit that intersects Earth's radiation belts and debris environment and in interplanetary space where direct exposure to solar flares, Galactic Cosmic Rays, and micrometeoroids was possible. A suite of experiments was developed by the Naval Research Laboratory (NRL), the Jet Propulsion Laboratory (JPL), NASA Langley Research Center (LaRC), the Aerospace Corporation, and NASA Goddard Space Flight Center (GSFC) to investigate in detail specific radiation and environmental reliability issues. This paper presents an introduction to the issues being investigated, the instruments provided for the mission, and the rationale for the engineering program.

Spacecraft↗

Test-Derived Effective Emittance for Cassini MLI Blankets and Heat Loss Characteristics in the Vicinity of Seams

Thermal performance of Cassini MLI blankets was characterized in thermal vacuum tests. Effective emittance was derived for the standard and high-temperature layups, with or without micrometeoroid protection standoffs, and for a high-performance duo-layup with staggered seams. The all-Kapton layup wa shown to have a 19% higher effective emittance than the hybrid Kapton-Mylar layup, and the duo-layup exhibited a dramatic capability of reducing heat dissipation by 2.6 fold. Several different definitions of effective emittance are discussed, and their relations to distinct hardware-MLI configurations and corresponding modeling techniques clarified. Large temperature differences (up to 70 C) were observed between the center and seam of a blanket. Heat losses in the vicinity of seams are qualified, and a major MLI heat loss mechanism elucidated.

Cassini↗