Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mixed Oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Probing basal planes and edge sites in polygranular nuclear graphite by gas adsorption: Estimation of active surface area

Polygranular nuclear graphite, manufactured at 2800–3000 °C from a carbonized filler and binder mix, has high graphitization degree, crystalline structure close to perfect graphite, and about 20% porosity. The pore surfaces expose large regions of rough, defective prismatic edges of graphite crystallites which are the locus of graphite materials surface sites active for oxidation, chemisorption, and electron transfer. However, we show that high-resolution N 2 and Kr first monolayer adsorption on polygranular graphite (P/P 0 < 0.015) occurs in many ways like adsorption on graphitized carbon blacks. This proves the presence of energetically homogeneous basal planes domains in graphite porosity, which was not fully acknowledged before. Using classical analysis methods (Langmuir, Hill-de Boer, adsorption potential distribution) we quantity the basal plane area (BPA) of several polygranular graphite types and correlate it with their microstructure. Finally, we propose that gas adsorption is uniquely positioned to reliably estimate the active surface area of graphite by subtracting BPA from the BET total surface area. Direct estimation based on adsorption is preferable to indirect calculations based on microstructural information.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Heat Loss Effects on Emissions in an NH 3 RRQL Combustor

Ammonia (NH 3 ) is a carbon-free energy carrier with an infrastructure for production, storage, and distribution. There is interest in direct NH 3 combustion, but managing pollutant emissions is a key challenge, particularly nitric oxides (NO x ) due to the fuel-bound nitrogen atom, nitrous oxide (N 2 O), which is a potent greenhouse gas, and unburned NH 3 , which is harmful to humans and the environment. Rich staged combustor concepts with extended primary residence times (τ res,primary ), like Rich-Relax- Quick-mix-Lean (RRQL), offer a viable pathway for direct NH 3 combustion with low levels of NO x formation. However, minimizing secondary emissions such as N 2 O and unburned NH 3 and hydrogen (H 2 ) remains a critical challenge. Prior atmospheric-pressure studies have demonstrated that RRQL operation with sufficiently long τ res,primary enables substantial NO x relaxation and promotes NH 3 cracking to H 2 , if heat losses from the relaxation stage are limited. However, the combined influence of elevated pressure and long residence time on RRQL performance has not been explored. The present work examines RRQL operation at pressures up to 5 bar and elevated τ res,primary . Exhaust measurements of NO x , NH 3 , and N 2 O are used to quantify the extent of NO x relaxation and NH 3 cracking under nonadiabatic conditions. To contextualize and quantify the effects of heat losses in the experimental data, chemical reactor networks (CRNs) incorporating prescribed heat loss rates are employed to assess the sensitivity of emissions to thermal losses in the relaxation stage. Collectively, the results demonstrate that management and quantification of heat losses are essential to preserve NO x relaxation and limit NH 3 and N 2 O emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stable and selective catalysts for propane dehydrogenation operating at thermodynamic limit

Hitting the limits on propene synthesis The greater abundance of propane from shale gas has spurred efforts to use it as a propylene feedstock. Direct dehydrogenation catalysts consisting of platinum–tin alloy nanoparticles supported on alumina often must run with hydrogen dilution to avoid carbon buildup and excess tin to avoid alloy segregation. Motagamwala et al. report that platinum–tin nanoparticles interact more weakly with a silica support and the metals thus do not segregate. The use of undiluted reactants allowed the reaction to run near the thermodynamically limit of about 67% conversion with a selectivity to propylene of more than 99%. This catalyst also does not build up carbon and could run up to 30 hours without deactivation. Science , abg7894, this issue p. 217

Science & Technology - Other Topics↗
DOE OSTI2025

Corrosion Resistance of an AlCeMg/Stainless-Steel Reactive Bond

A major issue for metal components in many industries is corrosion as it can substantially reduce their lifetime. This issue is especially problematic for materials used in heat exchanger applications. Al–Ce–Mg alloys, which exhibit corrosion resistance and can reactively bond with other metals, may be a viable solution to this problem. This investigation studied the corrosion behavior of Al–2Ce–6Mg (atomic percent)/stainless-steel (SS) reactive bond interfaces after full immersion in nitric, sulfuric, formic, and mixed acid for 267 h. This particular Al–Ce–Mg alloy was chosen due to its good castability. The results of scanning electron microscope characterization showed that reactive bond formations repeatedly occurred throughout the length of the casting in the as-cut samples and that these formations maintained a secure bonding between the alloy and the stainless-steel tubes. Transmission electron microscopy results showed that there was a clear compositional and microstructural transition across the reactive bond. The results of the immersion tests indicated that the nitric, sulfuric, and the mixed acid did not have an observably negative effect on the reactive bond structure. As for the sample exposed to formic acid only, noticable changes were seen in both the microstructural appearance and the elemental profile across the bond, suggesting that oxide formation occurred.

Brechtl, Jamieson [ORNL] (ORCID:0000000217394283)↗
DOE OSTI2025

f-Element complexes with benzyl and cyclohexyl substituted trihydroborates

Actinide complexes containing the simplest borohydrides (BH 4 ) 1- and (MeBH 3 ) 1- can exhibit remarkably highly volatility, which creates unique hazards and handling challenges, especially when making measurements on solid samples under vacuum. Here we describe efforts to prepare new actinide borohydride complexes with attenuated volatility by adding bulkier benzyl (Bn) and cyclohexyl (Cy) substituents to boron. Reactions of ThCl 4 , UI 3 (thf) 4 , and NdI 3 with the mixed alkali metal salt Li/K(BnBH 3 )(thf) n yielded Th(BnBH 3 ) 4 (thf) 2 , U(BnBH 3 ) 4 (thf) 2 , and K[Nd(BnBH 3 ) 4 ], respectively. Notable amongst these, the reaction with UI 3 (thf) 4 proceeds via oxidation of U(III) to U(IV) despite the presence of reducing borohydride ligands. Similarly, reactions of the same metal halides with four equivalents of Li(CyBH 3 )(Et 2 O) n yielded Th(CyBH 3 ) 4 , U(CyBH 3 ) 4 (thf) 2 , and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ]. Single crystal X-ray diffraction studies of the M(BnBH 3 ) 4 (thf) 2 complexes with M = Th and U confirmed their formulations. Furthermore, the complexes have approximate D 2d point group symmetry and adopt bicapped hexagonal antiprismatic coordination geometries with axial thf ligands and κ 3 -BnBH 3 ligands bound in the equatorial plane. K[Nd(BnBH 3 ) 4 ] and [Li(Et 2 O) 3 ][Nd(CyBH 3 ) 4 ], which were prepared for comparison to U(III) complexes that were unsuccessfully targeted, were also structurally characterized to reveal complex anions with tetrahedral arrangements of trihydroborate ligands bound to Nd(III). Crystals obtained for Th(CyBH 3 ) 4 and U(CyBH 3 ) 4 (thf) 2 were not suitable for XRD studies, but 1 H and 11 B NMR spectra were consistent with their formulations. Collectively, these complexes represent rare examples of structurally characterized f-element trihydroborate complexes with carbon substituents other than methyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sources and Composition of Organic Aerosols in the Central Arctic during Spring and Summer

Organic aerosols (OA) are a major component of Arctic aerosol mass and influence the region’s radiation budget, yet their sources and physicochemical properties remain largely unknown. We investigate OA sources and climate-relevant characteristics over the central Arctic Ocean in spring and summer, by applying positive matrix factorization to aerosol mass spectrometry data from two ship-based expeditions (2018 and 2020), complemented by total and interstitial aerosol measurements during fog periods. Six distinct OA factors were identified: haze-related OA, Arctic oxygenated OA, two mixed-OA types resembling biomass burning and primary marine OA linked to warm-air intrusions, marine OA, and hydrocarbon-related OA. Seasonal transitions strongly shaped OA composition. Following polar sunrise, highly oxygenated OA, likely formed secondarily from photo-oxidized volatile organic compounds, became dominant. After the polar vortex collapsed in May, episodic spikes in marine OA from the marginal ice zone appeared, alongside a reduced influence from Eurasian anthropogenic sources. These transitions influenced OA oxidation state and related properties including volatility, acidity, and hygroscopicity, highlighting the role of the Arctic spring atmosphere as an active photochemical reactor. Overall, OA was highly oxidized, with particles activated in fog during summer showing even greater oxidation, suggesting that central Arctic OA can be highly cloud active.

Arctic haze↗
DOE OSTI2022

Temporal and spatial tuning of optical constants in praseodymium doped ceria by electrochemical means

Abstract Temporal and spatial tuning of the refractive index of optical thin films is desired for flat optics applications. The redistribution of mobile ions in mixed ionic-electronic conductors (MIEC) has been demonstrated to serve as a viable means for achieving optical tuning down to the nanoscale. Here we studied the dynamic range of the optical tuning achievable in the refractive index, in the MIEC oxide – Pr x Ce 1− x O 2− δ (PCO), for x = 0.1, 0.2 and 0.4, at 500 °C, by in-situ spectrophotometry. Significant increases in the modulation of both the imaginary and real optical constants in the visible and the adjacent spectra were obtained for increased doping levels. Device employing an electrochemical titration method was implemented to modulate the oxygen concentration, and thereby the optical transmission of PCO. Incorporation of a patterned top electrode allowed for the demonstration of spatial control of PCO thin film properties by in-situ video imaging of the optical switching process. The electrochemically induced optical state is shown to remain non-volatile upon quenching the device to room temperature under applied bias.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Deterministic Fabrication of Large-Area, High-Crystallinity Oxide Moiré Superlattices

Oxide twistronics extends moiré engineering beyond van der Waals materials, offering a promising platform for accessing emergent interfacial phenomena arising from the strong coupling of lattice, charge, and orbital degrees of freedom in complex oxides. However, deterministic fabrication of high-crystallinity oxide moiré superlattices over large lateral dimensions remains challenging due to the three-dimensional bonding network of oxides. Here, we demonstrate a scalable, generalized fabrication strategy that enables the formation of high-crystallinity oxide moiré superlattices with clean, chemically bonded interfaces and precisely controlled twist angles down to nominal values of 0.1°, achieving subdegree twist-angle accuracy across large contiguous lateral dimensions approaching the millimeter scale. Using NaNbO3 as a model system, we show that the resulting interlayer coupling drives pronounced structural reconstruction that modifies both the phase structure and ferroelectric domain configuration. Synchrotron-based X-ray 3D reciprocal space mapping reveals the emergence of a single-phase state in twisted bilayers, in contrast to the mixed-phase structure observed in single-layer membranes prior to twist assembly. The structural signatures are further consistent with gradual lattice rotation distributed along the thickness direction that may accommodate interfacial shear strain, distinct from reconstruction observed in van der Waals moiré systems which primarily occurs through in-plane stacking rearrangement. This collective lattice response is correlated with twist-dependent nanoscale electromechanical modulations observed by piezoresponse force microscopy. These results establish a scalable materials platform for oxide twistronics and support the implementation of twist-engineered functionalities in practical, macroscale device architectures.

Ghanbari, Reza [North Carolina State University (N↗
DOE OSTI2020

Implementation of the Glycolate Destruction Process with Sodium Permanganate in the Defense Waste Processing Facility (DWPF) - 20141

The Savannah River Site (SRS) seeks to replace formic acid with glycolic acid as a chemical reductant in the Defense Waste Processing Facility (DWPF), where borosilicate glass is mixed with high-level radioactive waste, melted at high temperatures, then poured into stainless steel canisters for safe storage. Prior research and development have demonstrated the feasibility and advantages of the new nitric-glycolic acid flowsheet over the current nitric-formic acid flowsheet to chemically adjust the radioactive sludge slurry waste in the Sludge Receipt and Adjustment Tank (SRAT) prior to vitrification. Use of glycolic acid reduces hydrogen and ammonia generation during the reduction process, thus reducing flammability hazards and purge requirements in the DWPF processing vessels. In addition, glycolic acid will support the new Salt Waste Processing Facility (SWPF) by allowing for receipt of higher volumes of waste due to reduction of flammable gases, increased boil-up rates in the vessels, and easing the processing of future sludge batches containing high levels of mercury. However, during DWPF operations, trace amounts of glycolate are anticipated to be entrained in the recycle stream and sent to the Concentration, Storage, and Transfer Facilities (CSTF) via the Recycle Collection Tank (RCT). The RCT receives condensate from the Slurry Mix Evaporator Condensate Tank (SMECT) and Off-gas Condensate Tank (OGCT) that may contain unreacted glycolate. A literature review found the potential for hydrogen generation due to thermolysis of glycolate in caustic CSTF conditions. Savannah River National Laboratory (SRNL) conducted several tests on simulant and radioactive waste from various tanks at SRS and confirmed that glycolate added to waste at concentrations of approximately 1000 mg/L and higher generates hydrogen through thermolysis. There are potential operating scenarios in the future where glycolate concentration could exceed 1000 mg/L in the 2H Evaporator Drop Tank, the highest accumulation point for DWPF organics received via recycle. These findings presented a need to develop another process to mitigate the impact of glycolic acid to the CSTF. Several DWPF compatible options were evaluated for their ability to destroy glycolate in the DWPF recycle stream under various processing conditions, thereby mitigating its introduction to the CSTF. Downselection testing identified sodium permanganate as the most promising and simplest option to oxidize glycolate. It has been demonstrated to be effective in various RCT simulant compositions, operating temperatures, oxidant addition rates, solution pH, and initial glycolate concentrations. A feasibility study identified existing tanks within the facility that could be used for receiving and storing the commercially available sodium permanganate, as well as feeding it to the RCT for processing. The use of existing equipment as well as the ability to purchase the pre-mixed chemical reduces implementation and operational complexity. The downstream impacts of the sodium permanganate reaction were also evaluated and demonstrated to have minimal impact on other chemical species present in the RCT and CSTF, as well as on the materials of construction of the RCT and CSTF vessels and associated piping and instrumentation. Future work is in progress to validate the glycolate destruction process with testing in actual radioactive RCT waste before implementation in DWPF. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Modeling a High-Temperature Electrochemically Driven Water-Gas-Shift Process Using a Mixed-Conducting Membrane without External Electrical Power

This paper develops a model to predict and interpret the performance of an elevated-temperature, electrochemical, membrane-assisted, water-gas-shift process. The process uses separated feed streams of H 2 O and CO to produce separated streams of H 2 and CO 2 , without an external electrical power source. The dense ceramic membrane is mixed ionic-electronic-conducting (MIEC) gadolinium-doped ceria (GDC) and the porous composite electrodes are Ni-YSZ. At elevated temperature, GDC conducts both oxygen ions and small polarons. The present process uses chemical potential to drive the process. Electrochemical oxidation of CO proceeds within the composite anode and H 2 O reduction proceeds within the composite cathode. At high temperature (e.g., T > 700 °C), GDC has significant electronic leakage in the form of a reduced-cerium small polaron, which supports the charge-transfer reactions. In a typical electrolyzer or fuel cell, this leakage is significantly problematic. However, the present process depends on the leakage current to complete the electrochemical circuit. Model development and validation is based on measured material properties and reactor performance. Potential applications include using CO-rich blast-furnace off gases in steel processing, producing separated streams of H 2 and CO 2 .

Zhu, Huayang↗
DOE OSTI2022

Techno-economic assessment for the production of algal fuels and value-added products: opportunities for high-protein microalgae conversion

Abstract Background Microalgae possess numerous advantages for use as a feedstock in producing renewable fuels and products, with techno-economic analysis (TEA) frequently used to highlight the economic potential and technical challenges of utilizing this biomass in a biorefinery context. However, many historical TEA studies have focused on the conversion of biomass with elevated levels of carbohydrates and lipids and lower levels of protein, incurring substantial burdens on the ability to achieve high cultivation productivity rates relative to nutrient-replete, high-protein biomass. Given a strong dependence of algal biomass production costs on cultivation productivity, further TEA assessment is needed to understand the economic potential for utilizing potentially lower-cost but lower-quality, high-protein microalgae for biorefinery conversion. Results In this work, we conduct rigorous TEA modeling to assess the economic viability of two conceptual technology pathways for processing proteinaceous algae into a suite of fuels and products. One approach, termed mild oxidative treatment and upgrading (MOTU), makes use of a series of thermo-catalytic operations to upgrade solubilized proteins and carbohydrates to hydrocarbon fuels, while another alternative focuses on the biological conversion of those substrates to oxygenated fuels in the form of mixed alcohols (MA). Both pathways rely on the production of polyurethanes from unsaturated fatty acids and valorization of unconverted solids for use as a material for synthesizing bioplastics. The assessment found similar, albeit slightly higher fuel yields and lower costs for the MA pathway, translating to a residual solids selling price of $899/ton for MA versus $1033/ton for MOTU as would be required to support a $2.50/gallon gasoline equivalent (GGE) fuel selling price. A variation of the MA pathway including subsequent upgrading of the mixed alcohols to hydrocarbon fuels (MAU) reflected a required solids selling price of $975/ton. Conclusion The slight advantages observed for the MA pathway are partially attributed to a boundary that stops at oxygenated fuels versus fungible drop-in hydrocarbon fuels through a more complex MOTU configuration, with more comparable results obtained for the MAU scenario. In either case, it was shown that an integrated algal biorefinery can be economical through optimal strategies to utilize and valorize all fractions of the biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Optimization of a Secondary Air Injector for a Rich-Quench-Lean (RQL) Ammonia Combustor Using Computational Fluid Dynamics

Ammonia has emerged as a promising medium for moving hydrogen around the globe due to its energy density, existing infrastructure for production, transportation, and storage, and multiple applications from fertilizer to power generation. However, one of the most significant challenges with ammonia combustion for power generation is the formation of nitrogen oxides (NOx) during combustion. Several combustion strategies have been developed to minimize the formation of NOx. One such strategy, known as rich-quench-lean (RQL), is a method that combusts NH3 in a fuel-rich environment, followed by a quick mix section and a lean burnout section. Rapid mixing of secondary air before lean burnout is thought to be important to minimize the formation of NOx. A genetic algorithm (GA) is used to parametrically vary the secondary air injector design, including the diameter, count, and angles over a constrained design space. The designs are evaluated using a non-reacting OpenFOAM model, with the objective function being the uniformity index of the secondary air (modeled as a scalar). Optimization campaigns show that traditional correlation-based designs might not be adequate. After running 414 OpenFOAM models, the optimal design is 32, 1 mm diameter, angled air injectors, increasing the uniformity index at the outlet of the quick mix zone by 36.8%. The most promising designs will be manufactured and tested in a small RQL burner setup, which is expected to lead to validation and insight into the practical usage of NH3 combustion for power generation.

ammonia combustion↗
DOE OSTI2020

Magnetic Sorbent for the Removal of Selenium(IV) from Simulated Industrial Wastewaters: Determination of Column Kinetic Parameters

A novel meso- and microporous tire-derived-carbon support with magnetic iron oxide nanoparticle adsorbents that selectively adsorbs Se(IV) ions from simulated contaminated water has been developed. In this work, the physicochemical characteristics of the composite adsorbent are characterized with respect to porosity and surface area, chemical composition, and microstructure morphology. The kinetics of this composite adsorbent in a fixed-bed setting has been determined. Several column runs were conducted and analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES) to determine the concentration gradient vs time. These results were then fit to a pseudo-second order rate law to obtain equilibrium values. Combining calculated equilibrium values with effluent concentration data, enabled the application of the Adams–Bohart model to determine reaction constants and column coefficients. Column parameters obtained from different flow rates and fittings of the Adams–Bohart model were remarkably consistent. These findings enable the application of this sorbent to fixed-bed column systems and opens up further research into mixed pollutants tests with real wastewater and scaling of selenium pollutant removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Comparison of Na 2 SO 4 , K 2 SO 4 and Na 2 SO 4 -K 2 SO 4 deposit induced hot corrosion of a β-NiAl coating

Here, hot corrosion behaviour of a β-NiAl coating induced by Na 2 SO 4 , K 2 SO 4 , and Na 2 SO 4 -K 2 SO 4 deposits was investigated at 700 °C in air + 300 ppm SO 2 . To provide an insight into the corrosion mechanisms, phase equilibria of the Na 2 SO 4 -K 2 SO 4 -NiO-SO 3 system were calculated using an in-house developed thermodynamic database. The attack rates and morphologies could be correlated with the deposit compositions and their reactions with oxides. K 2 SO 4 and Na 2 SO 4 -K 2 SO 4 deposits are more corrosive than Na 2 SO 4 . This is attributed to a reduction of the melting temperature of the deposit and the formation of Ni-containing mixed sulphate phases in the presence of K 2 SO 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Advanced adsorption processes for separation of bio-derived products

Disclosed herein are methods for the recovery of target bio-base carboxylic acid products using a sorption-based technology with a mixed elution solvent optimized for minimized downstream distillation energy input. The sorption-based technology includes absorbing the targeted bio-base carboxylic acid products onto a non-ionic resin and eluting the targeted bio-base carboxylic acid products with a mixed elution solvent. The mixed elution solvent includes a first solvent and a second solvent. The first solvent has a boiling point that is lower than the targeted bio-base carboxylic acid products and the second solvent is selected from the group consisting of a phosphine oxide or tertiary amine.

Saboe, Patrick Owen↗
DOE OSTI2021

I.1 Heavy-Duty Diesel Combustion (Sandia National Laboratories)

Regulatory drivers and market demands for lower pollutant emissions, lower carbon dioxide emissions, and lower fuel consumption motivate the development of cleaner and more fuel-efficient engine operating strategies. Most current production heavy-duty diesel engines use a combination of both in-cylinder and exhaust emissions-control strategies to achieve these goals. The emissions and efficiency performance of in-cylinder strategies depend strongly on flow and mixing processes that can be influenced by using multiple fuel injections. Past work performed under this project showed that adding a second injection can reduce soot to levels below what would have been produced by an unchanged first injection, thereby increasing load while decreasing soot and potentially reducing brake specific fuel consumption. Information characterizing the important in-cylinder processes with multiple injections has been gleaned from ensemble-averaged planar laser-induced incandescence (PLII) imaging visualizing the soot cloud and planar induced fluorescence (PLIF) of OH characterizing the soot oxidation regions. PLII showed a consistent disruption of the first injection soot cloud by the second injection. In conjunction with OH-PLIF, differences in soot oxidation patterns for multiple injections compared to single injections were observed. This understanding was further enhanced in FY20, when high-speed imaging resolving the above-mentioned effects in a single cycle were combined with direct numerical simulations investigating the multiple-injection ignition process on the microscopic level of turbulence and chemistry interaction. In FY21, these findings in conjunction with findings from other researchers published in the scientific literature were composed into a preliminary multiple-injection conceptual model of fuel-mixing, injection and ignition processes. Remaining key research questions were also highlighted. In addition, wall heat flux was investigated experimentally and with numerical simulations to understand the potential of multiple injections to reduce the engine heat losses and further enhance the efficiency.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Crystal structure of [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 : a discrete molecular capsule built from multinuclear organothorium cluster cations

An unusually large and structurally complex charge-neutral polynuclear cluster, hexa-μ 2 -azido-di-μ 3 -chlorido-hexa-μ 2 -hydroxido-di-μ 3 -oxido-hexakis(pentamethylcyclopentadienyl)hexathorium–diethyl ether–tetrahydrofuran (1/0.56/1.44), [Th 3 (C 10 H 15 ) 6 Cl 3 (N 3 ) 6 (OH) 6 O 2 ]·0.56C 4 H 10 O·1.44C 4 H 8 O or [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 ·0.56C 4 H 10 O·1.44C 4 H 8 O (Cp* = [pentamethylcyclopentadienyl]) − , has been crystallized as a mixed tetrahydrofuran/diethyl ether solvate and structurally characterized. The molecule contains a number of unusual features, the most notable being a finite yet exceptionally long cyclic metal-azido chain. These rare features are the consequence of both sterically protecting Cp* ligands and highly bridging oxide and hydroxide ligands in the same system and illustrate the interesting new possibilities that can arise from combining organometallic and solvothermal f -block element chemistry.

Kelley, Steven P.↗