Search NASA⌕ Search

SEARCH · Search NASA

Results for “NATIONAL SCIENCE FOUNDATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

SU-F-T-318: Sensitivity and Stability of OSLDs with Filled Deep Electron/hole Traps Under Pre-Irradiation and Bleaching Conditions

Purpose: This work evaluated the characteristics of optically stimulated luminescence dosimeters (OSLDs) with fully filled deep electron/hole traps (OSLDfull) with the bleaching conditions according to the accumulated dose. Methods: The OSLDs were first pre-irradiated with a Co-60 gamma ray at more than 5 kGy, so as to fill the deep electron and hole traps. Using a 6-MV beam, the OSLDfull characteristics were investigated in terms of the full bleaching, fading, dose linearity, and dose sensitivity obtained in response to the accumulated dose values. To facilitate a comparison of the dose sensitivity, OSLDs with un-filled deep electron/hole traps (OSLDempty) were investigated in the same manner. A long-pass filter was used to exclude bleaching-source wavelengths of less than 520 nm. Various bleaching time and wavelength combinations were used in order to determine the optimal bleaching conditions for the OSLD full. Results: The fading for the OSLDfull exhibited stable signals after 8 min, for both 1- and 10-Gy. For 4-h bleaching time and an unfiltered bleaching device, the supralinear index values for the OSLDfull were 1.003, 1.002, 0.999, and 1.001 for doses of 2, 4, 7, and 10 Gy, respectively. For a 65-Gy accumulated dose with a 5-Gy fraction, no variation in dose sensitivity was obtained for the OSLDfull, within a standard deviation of 0.85%, whereas the OSLDempty dose sensitivity decreased by approximately 2.3% per 10 Gy. The filtered bleaching device yielded a highly stable sensitivity for OSLDfull, independent of bleaching time and within a standard deviation of 0.71%, whereas the OSLDempty dose sensitivity decreased by approximately 4.2% per 10 Gy for an accumulated dose of 25 Gy with a 5-Gy fraction. Conclusion: Under the bleaching conditions determined in this study, clinical dosimetry with OSLDfull is highly stable, having an accuracy of 1% with no change in dose sensitivity or linearity at clinical doses. This work was supported by a National Research Foundation of Korea (NRF) grant, funded by the Korea government (MISP) (No. 2014M2B2A4031164), and by the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (HI14C3459).

60 APPLIED LIFE SCIENCES↗

Identification of Solid-Electrolyte Interphase Species by Joint Characterization of Li-Ion Battery Chemistry by Mass Spectrometry and Electrochemical Reaction Networks

The formation and stability of the solid-electrolyte interphase (SEI) play central roles in determining the long-term performance and safety of modern electrochemical energy storage systems. Despite decades of research, the SEI’s heterogeneous, dynamic, and multiphase nature has defied comprehensive molecular-level characterization, creating a critical knowledge gap that limits rational battery design. In this work, we introduce a computational−experimental framework that integrates high-throughput quantum chemistry calculations, data-driven electrochemical reaction networks (eCRNs), stochastic algorithms, and laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry (LDI-FTICR-MS) to unravel SEI formation in carbonatebased electrolytes without imposing predefined mechanisms. We constructed the most comprehensive eCRN to date, spanning over 10,000 species and 209 million reactions. Through stochastic network analysis, we successfully recovered 27 species that were previously reported in the literature and predicted 28 novel SEI species nearly doubling our scientific knowledge in this area. Each new species was rigorously confirmed through advanced mass spectral analysis of its distinct molecular and isotopic signatures. We kinetically refined the formation pathways for a select set of both previously reported and novel SEI products, revealing kinetically feasible elementary reaction mechanisms with activation barriers below 1 eV. This computational−experimental approach deepens our molecular-level understanding of SEI chemistry by resolving which species form and through which decomposition mechanisms they emerge. Such knowledge provides the foundation necessary to connect electrolyte composition to the resulting SEI components, a critical step toward a more informed electrolyte development in next-generation lithium-based batteries.

25 ENERGY STORAGE↗

Quantum annealing-assisted lattice optimization

High Entropy Alloys (HEAs) have drawn great interest due to their exceptional properties compared to conventional materials. The configuration of HEA system is considered a key to their superior properties, but exhausting all possible configurations of atom coordinates and species to find the ground energy state is extremely challenging. In this work, we proposed a quantum annealing-assisted lattice optimization (QALO) algorithm, which is an active learning framework that integrates the Field-aware Factorization Machine (FFM) as the surrogate model for lattice energy prediction, Quantum Annealing (QA) as an optimizer and Machine Learning Potential (MLP) for ground truth energy calculation. By applying our algorithm to the NbMoTaW alloy, we reproduced the Nb depletion and W enrichment observed in bulk HEA. We found our optimized HEAs to have superior mechanical properties compared to the randomly generated alloy configurations. Our algorithm highlights the potential of quantum computing in materials design and discovery, laying a foundation for further exploring and optimizing structure-property relationships.

36 MATERIALS SCIENCE↗

SESAME/Environmental Research Laboratories

The Environmental Research Laboratories (ERL) have been designated as the basic research group of the National Oceanic and Atmospheric Administration (NOAA). ERL performs an integrated program of research and research services directed toward understanding the geophysical environment, protecting the environment, and improving the forecasting ability of NOAA. Twenty-four laboratories located throughout the United States comprise ERL. The Project SESAME (Severe Environmental Storms and Mesoscale Experiment) Planning Office is a project office within ERL. SESAME is conceived as a joint effort involving NOAA, NASA, NSF, and the atmospheric science community to lay the foundation for improved prediction of severe convective storms. The scientific plan for SESAME includes a phased buildup of analysis, modeling, instrumentation development and procurement, and limited-scale observational activities.

Source record↗

Lunar Exploration in the 21st Century

The Apollo and Luna missions to the Moon in the 1960s and 1970s unambiguously established that the Moon is useful, interesting, and attainable. Starting with the Clementine mission in 1994, Moon has been the focus of a new series of increasingly ambitious science and exploration missions from many nations. In 2025, it is expected that the Artemis III mission will be the first human landing on the Moon in the 21st Century, eventually leading to the establishment of a field station at the lunar south pole. In the United States, lunar missions have been guided by a series of community documents that established lunar science and exploration objectives. In this talk, I will summarize the long-established science goals of US lunar exploration missions as expressed in foundational community documents and the processes used to establish these science goals.

Samuel Lawrence↗

A Research Agenda for Transforming Separation Science

Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.

Chemical separation↗

Investigation of a Novel NDE Method for Monitoring Thermomechanical Damage and Microstructure Evolution in Ferritic-Martensitic Steels for Generation IV Nuclear Energy Systems

The main goal of the proposed project is the development of validated nondestructive evaluation (NDE) techniques for in situ monitoring of ferritic-martensitic steels like Grade 91 9Cr-1Mo, which are candidate materials for Generation IV nuclear energy structural components operating at temperatures up to ≈650 °C and for steam-generator tubing for sodium-cooled fast reactors. Full assessment of thermomechanical damage requires a clear separation between thermally activated microstructural evolution and creep damage caused by simultaneous mechanical stress. Creep damage can be classified as "negligible" creep without significant plastic strain and "ordinary" creep of the primary, secondary, and tertiary kind that is accompanied by significant plastic deformation and/or cavity nucleation and growth. Under negligible creep conditions of interest in this project, minimal or no plastic strain occurs, and the accumulation of creep damage does not significantly reduce the fatigue life of a structural component so that low-temperature design rules, such as the ASME Section III, Subsection NB, can be applied with confidence. The proposed research project will utilize a multifaceted approach in which the feasibility of electrical conductivity and thermo-electric monitoring methods is researched and coupled with detailed post-thermal/creep exposure characterization of microstructural changes and damage processes using state-of-the-art electron microscopy techniques, with the aim of establishing the most effective nondestructive materials evaluation technique for particular degradation modes in high-temperature alloys that are candidates for use in the Next Generation Nuclear Plant (NGNP) as well as providing the necessary mechanism-based underpinnings for relating the two. Only techniques suitable for practical application in situ will be considered. As the project evolves and results accumulate, we will also study the use of this technique for monitoring other GEN IV materials. Through the results obtained from this integrated materials behavior and NDE study, new insight will be gained into the best nondestructive creep and microstructure monitoring methods for the particular mechanisms identified in these materials. The proposed project includes collaboration with a national laboratory partner and the results will also serve as a foundation to guide the efforts of scientists in the DOE laboratory, university, and industrial communities concerned with the technological challenges of monitoring creep and microstructural evolution in materials planned to be used in Generation IV Nuclear Energy Systems.

36 MATERIALS SCIENCE↗

Report of the Bulk Working Group

The world in general and the USA in particular are facing an oncoming energy shortage. One key mechanism to provide carbon-free energy is nuclear fission. At this point, 20% of the US electrical power grid is supplied by nuclear energy. (Interestingly, it is 50% in Illinois.) European nations such as Sweden (50% nuclear electricity) and France (80% nuclear electricity) are pushing ahead with permanent radioactive waste storage and processing. If nothing else, the USA needs to provide the scientific foundation for improving its nuclear-power generation facilities. One key issue and how the APS could affect it are discussed below. (This discussion of this issue is not meant to be a comprehension argument in support of a facility but merely an example of the sort of science that could be pursued. An exhaustive collection of arguments would take more time and effort.) The modification of various zones inside a nuclear fuel is an important issue. This includes microscopic re-crystallization, stress, fission gas production, He bubble formation and the intermixing, depletion and enrichment of various chemical, daughter and other isotopic species. For example, past studies of the ternary nuclear fuel UPuZr have demonstrated constituent redistribution when irradiated or with thermal treatment. The concentration variations shown above are of significant concern. Driven in part by the thermal gradient within the nuclear fuel, these variations can affect reactor performance and fuel burn-up levels. Similar gradients were observed in samples that were not irradiated but underwent thermal gradient treatments. From measurement such as these, kinetic parameters such as effective inter-diffusion coefficients were derived. The amount of such experimental data is very limited. Interaction of the fuel constituents with cladding and coolant are also important. At present, INL scientists pursue a number of measurements on-site at INL and off-site to address issues such as this. Here, we will propose two key examples of how a new facility at the APS could impact this technological issue.

36 MATERIALS SCIENCE↗

State-by-state energy-water-land-health impacts of the US net-zero emissions goal

As decisionmakers at various scales begin to design strategies to implement the US net-zero goal, a holistic understanding of its broader economic and sustainability implications at subnational scales is important to shape public support and facilitate implementation. Here, we use an integrated assessment model to explore four different pathways toward the US net-zero goal and investigate their energy-water-land-health implications at the state level. In this study, we show that achieving the net-zero goal implies significant capital turnover (170–200 billion USD/year capital investment and 16–29 billion USD/year stranded assets in the power sector), reduced water withdrawal (120–210 km 3 /year), avoided air pollution damages (220–300 billion USD/year), and expanded forests (300–500 thousand km 2 ). However, the economic and sustainability implications of achieving the net-zero goal at the state-level may not be correlated to a state's contribution to national emission reductions. Our study lays the foundations for a deeper understanding of the broader implications of the US net-zero goal to facilitate cost-effective and environmentally sustainable transitions toward that goal.

54 ENVIRONMENTAL SCIENCES↗

Neural operator transformers capture bifurcating drift-wave turbulence in fusion plasma simulations

Self-consistent modeling of turbulence-driven transport is critical for optimizing confinement in magnetically confined fusion plasmas, such as tokamaks and stellarators. In particular, capturing the long-term co-evolution of turbulence, flow, and background plasma profiles remains computationally challenging. Direct numerical simulation of these multiscale, highly nonlinear processes is often demanding and impractical for real-time control or design optimization. To address this bottleneck, we investigate transformer-based neural operator partial differential equation surrogates for emulating the dynamics of drift-wave turbulence bifurcation mediated by zonal flows, using the modified Hasegawa–Wakatani (MHW) model as a prototypical system. We find that the finetuned neural operator model has excellent performance in capturing the multi-spatiotemporal-scales of MHW turbulence bifurcation and is robust to testing on rare and out-of-distribution dynamics. Specifically, we demonstrate that a single unified model accurately predicts both quasi-steady-state turbulence and a wide range of dynamical transition processes, such as nonlinear saturation, spontaneous suppression of turbulence, and the emergence of macroscopic zonal flows, over time horizons vastly exceeding the local turbulence correlation time. This computationally efficient approach establishes a strong foundation for fast, AI-based modeling of complex, multiscale phenomena in magnetized fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Expert Meeting Report: Windows Options for New and Existing Homes

The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011, at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Intro to HPC Bootcamp: Engaging New Communities Through Energy Justice Projects

The U.S. Department of Energy (DOE) is a long-standing leader in research and development of high-performance computing (HPC) in the pursuit of science. However, we face daunting challenges in fostering a robust and diverse HPC workforce. Basic HPC is not typically taught at early stages of students' academic careers, and the capacity and knowledge of HPC at many institutions are limited. Even so, such topics are prerequisites for advanced training programs, internships, graduate school, and ultimately for careers in HPC. To help address this challenge, as part of the DOE Exascale Computing Project's Broadening Participation Initiative, we recently launched the Introduction to HPC Training and Workforce Pipeline Program to provide accessible introductory material on HPC, scalable AI, and analytics. We describe the Intro to HPC Bootcamp, an immersive program designed to engage students from underrepresented groups as they learn foundational HPC skills. Here, the program takes a novel approach to HPC training by turning the traditional curriculum upside down. Instead of focusing on technology and its applications, the bootcamp focuses on energy justice to motivate the training of HPC skills through project-based pedagogy and real-life science stories. Additionally, the bootcamp prepares students for internships and future careers at DOE labs. The first bootcamp, hosted by the advanced computing facilities at Argonne, Lawrence Berkeley, and Oak Ridge National Labs and organized by Sustainable Horizons Institute, took place in August 2023.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Space Discovery: Teaching with Space. Evaluation: Summer, Fall 1998 Programs

This is the final report of the 1998 NASA-sponsored evaluation of the effectiveness of the United States Space Foundation's five-day Space Discovery Standard Graduate Course (Living and Working in Space), the five-day Space Discovery Advanced Graduate Course (Advanced Technology and Biomedical Research), the five-day introductory course Aviation and Space Basics all conducted during the summer of 1998, and the Teaching with Space two-day Inservice program. The purpose of the program is to motivate and equip K- 12 teachers to use proven student-attracting space and technology concepts to support standard curriculum. These programs support the America 2000 National Educational Goals, encouraging more students to stay in school, increase in competence, and have a better opportunity to be attracted to math and science. The 1998 research program continues the comprehensive evaluation begun in 1992, this year studying five summer five-day sessions and five Inservice programs offered during the Fall of 1998 in California, Colorado, New York, and Virginia. A comprehensive research design by Dr. Robert Ewell of Creative Solutions and Dr. Darwyn Linder of Arizona State University evaluated the effectiveness of various areas of the program and its applicability on diverse groups. Preliminary research methodology was a set of survey instruments administered after the courses, and another to be sent in April-4-5 months following the last inservice involved in this study. This year, we have departed from this evaluation design in two ways. First, the five-day programs used NASA's new EDCATS on-line system and associated survey rather than the Linder/Ewell instruments. The Inservice programs were evaluated using the previously developed survey adapted for Inservice programs. Second, we did not do a follow-on survey of the teachers after they had been in the field as we have done in the past. Therefore, this evaluation captures only the reactions of the teachers to the programs immediately after the instruction. Although EDCATS is designed for teachers to enter their data logged onto the appropriate internet web site, most surveys were completed on a printed copy and entered into the EDCATS system by USSF personnel. The Aviation and Space Basics class were taken to a computer lab where they responded to the survey on-line. Data from the Inservice surveys were manually entered into a computer spreadsheet program by US Space Foundation personnel and processed using the statistical program SPSS for Windows. The raw data and copy of the EDCATS survey for the five-day programs are in Appendix 1. The raw data and copy of the Inservice survey are in Appendix 2. Comments from both programs are in Appendices 3 and 4, respectively.

Ewell, Bob↗

Expert Meeting Report: Windows Options for New and Existing Homes

The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2016 High Performance Computing Annual Report

Sandia National Laboratories’ California site is celebrating its 60th anniversary (1956 to 2016), and high performance computing has been a key enabler for its scientists and engineers throughout much of its history. Since its founding, Sandia California has helped pioneer the use of HPC platforms including hosting Sandia’s first Cray-1 supercomputer in the 1970s and supporting development of scalable cluster computing platforms to create a new paradigm for cost-effective supercomputing in the 1990s. Recent decades of investment in creation of scalable application frameworks for scientific computing have also enabled new generations of modeling and simulation codes. These resources have facilitated computational analysis of complex phenomena in diverse applications spanning national defense, energy, and homeland security. Today, Sandia California researchers work with partners in academia, industry, and national labs to evolve the state-of-the-art in HPC, modeling, and data analysis (including foundational capabilities for exascale computing platforms) and apply them in transformational ways. Research efforts include mitigating the effects of silent hardware failures that can jeopardize the results of large-scale computations, developing exascale-capable asynchronous task-parallel programming models and runtime systems, formulating new techniques to better explore and analyze extreme-scale data sets, and increasing our understanding of materials and chemical sciences which has applications spanning nuclear weapons stockpile stewardship to more efficient automobile engines. The following section highlights some of these research and applications projects and further illustrates the breadth of our HPC capabilities.

97 MATHEMATICS AND COMPUTING↗

Experimental demonstration of optical stochastic cooling

Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success. Stochastic cooling (SC), one of the most important conceptual and technological advances in this area cools a beam through granular sampling and correction of its phase-space structure, thus bearing resemblance to a ‘Maxwell’s demon’. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued, as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful tool for future accelerators. First proposed nearly 30 years ago, optical stochastic cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogues and is, in principle, compatible with any species of charged-particle beam. Here we describe a demonstration of OSC in a proof-of-principle experiment at the Fermi National Accelerator Laboratory’s Integrable Optics Test Accelerator. The experiment used 100-MeV electrons and a non-amplified configuration of OSC with a radiation wavelength of 950 nm, and achieved strong, simultaneous cooling of the beam in all degrees of freedom. This realization of SC at optical frequencies serves as a foundation for more advanced experiments with high-gain optical amplification, and advances opportunities for future operational OSC systems with potential benefit to a broad user community in the accelerator-based sciences.

43 PARTICLE ACCELERATORS↗

Understanding and Developing Dual-Wavelength Olefin Metathesis Polymerizations for the Rapid, Continuous Additive Manufacturing of High-Performance Thermosets

This report details the goals, approach, results, and future needs of a three-year Laboratory Directed Research and Development project funded by Sandia’s Materials Science Research Foundation. In this project, we established basic principles and mechanistic understanding of orthogonal or sequential chemistries for fabricating multi-material or robust materials. We developed numerous additive manufacturing, or 3D-printing, techniques including volumetric solid-state printing, dual-wavelength printing, and lithographic regulation of polymer crystallinity. We leveraged these new printing motifs to expand upon what is possible with manufacturing to give bespoke optical and mechanical performance. Moreover, we discovered new techniques for depolymerization enabling recovery of pristine carbon-fiber and high value electronics under moderate conditions.

36 MATERIALS SCIENCE↗