SEARCH · Search NASA

Results for “PHASE LOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Advanced altimetry

The radar altimeter being developed for the Ocean Topography Experiment (TOPEX) will have an inherent instrument precision of 2 to 3 cm. While some minor refinements may be possible in the future, major geophysical advances could be made if altimetric measurements over a wide swath of the Earth's surface were possible. The NASA Headquarters Oceanic Processes Branch is supporting a 3-year investigation of the technological issues inherent in the precision measurement of topography from spaceborne platforms at angles off-nadir. To explore the off-nadir measurement of topography, a flexible, airborne radar instrument system is being developed. Its hardware design is now complete, and it is made up of several subsystems. The antenna selected is a dielectric lens of .894 m diameter. The RF subsystem uses phase-locked oscillators, FET solid-state amplifiers, and times four frequency multipliers to develop a transmit signal at a frequency of 36.0 GHz and a local oscillator signal at a frequency of 35.4 GHz. Lecroy 6880 digitizers under computer control digitize the five receiver outputs. The digital subsystem consists of six single-board Heurikon processors. At this time, the instrument construction continues with final system integration planned for November 1988.

Parsons, C. L.↗

NASA NTRS1989

Supersonic rectangular jet impingement noise experiments

The discrete frequency sound produced by jets issuing from a convergent, rectangular nozzle of aspect ratio 4.24 was investigated. Experiments were performed both with the free jet and with the jet impinging on a hard ground surface. The impingement tones that dominate the impinging jet spectra show a definite staging behavior which appears to be biased toward the free jet screech frequency once the separation distance exceeds the region of substantial shock cell development. The frequency variation of the impingement tone stages fit the details of a feedback cycle if the disturbance convection velocity is chosen to be 20 percent higher than that necessary to satisfy the screech feedback loop. Phase locked optical records show a flapping mode of jet oscillation with tones at or near the screech frequency, with superimposed symmetric oscillations when a second dominant tone of unrelated frequency appears in the spectrum.

Norum, Thomas D.↗

NASA NTRS1989

Frequency estimation techniques for high dynamic trajectories

A comparison is presented of four different estimation techniques applied to the problem of continuously estimating the rapidly varying parameters of a sinusoidal signal, observed in the presence of additive noise. Frequency estimates are emphasized, although phase and/or frequency rate are also estimated by some of the algorithms. These parameters are related to the velocity, position, and acceleration of the maneuvering receiver or transmitter. Estimated performance at low carrier-to-noise ratios and high dynamics is investigated for the purpose of determining the useful operating range of an approximate maximum-likelihood estimator, an extended Kalman filter, a cross-product automatic frequency loop, and a phase-locked loop. Numerical simulations are used to evaluate performance while tracking a common trajectory exhibiting high dynamics.

Vilnrotter, Victor A.↗

NASA NTRS1989

Strain and dynamic measurements using fiber optic sensors embedded into graphite/epoxy tubes

Graphite/epoxy tubes were fabricated with embedded optical fibers to evaluate the feasibility of monitoring strains with a fiber optic technique. Resistance strain gauges were attached to the tubes to measure strain at four locations along the tube for comparison with the fiber optic sensors. Both static and dynamic strain measurements were made with excellent agreement between the embedded fiber optic strain sensor and the strain gauges. Strain measurements of 10(exp -7) can be detected with the optical phase locked loop (OPLL) system using optical fiber. Because of their light weight, compatibility with composites, immunity to electromagnetic interference, and based on the static and dynamic results obtained, fiber optic sensors embedded in composites may be useful as the sensing component of smart structures.

Dehart, D. W.↗

NASA NTRS1990

Tensile stress acoustic constants of unidirectional graphite/epoxy composites

Previously, the stress acoustic constants (SACs) of unidirectional graphite/epoxy composites were measured to determine the nonlinear moduli of this material. These measurements were made under compressive loading in order to obtain the sufficient number of values needed to calculate these moduli. However, because their strength in tension along fiber directions can be several times greater, most composites are used under tensile loading. Thus, it is important to characterize the nonlinear properties of these materials in tension as well. The SACs which are defined as the slope of the normalized change in ultrasonic 'natural' velocity as a function of stress were measured in a unidirectional laminate of T300/5208 graphite/epoxy. Tensile load was applied along the fiber axis with the ultrasonic waves propagating perpendicular to the fiber direction. Changes in velocity were measured using a pulsed phase locked loop ultrasonic interferometer with the nominal frequency of the ultrasonic waves being 2.25 MHz.

Prosser, W. H.↗

NASA NTRS1990

Digital accumulators in phase and frequency tracking loops

Results on the effects of digital accumulators in phase and frequency tracking loops are presented. Digital accumulators or summers are used extensively in digital signal processing to perform averaging or to reduce processing rates to acceptable levels. For tracking the Doppler of high-dynamic targets at low carrier-to-noise ratios, it is shown through simulation and experiment that digital accumulators can contribute an additional loss in operating threshold. This loss was not considered in any previous study and needs to be accounted for in performance prediction analysis. Simulation and measurement results are used to characterize the loss due to the digital summers for three different tracking loops: a digital phase-locked loop, a cross-product automatic frequency tracking loop, and an extended Kalman filter. The tracking algorithms are compared with respect to their frequency error performance and their ability to maintain lock during severe maneuvers at various carrier-to-noise ratios. It is shown that failure to account for the effect of accumulators can result in an inaccurate performance prediction, the extent of which depends highly on the algorithm used.

Hinedi, Sami↗

NASA NTRS1990

The use of interleaving for reducing noisy reference loss in trellis-coded modulation systems

The use of interleaving/deinterleaving in trellis-coded modulation systems to reduce the SNR loss due to imperfect carrier demodulation references is demonstrated. Both the discrete carrier (phase-locked loop) and the suppressed carrier (Costas loop) cases are considered, and the differences between the two are clearly demonstrated by numerical results. The special case of convolutional codes is also treated and illustrated with an example of practical interest.

Divsalar, Dariush↗

NASA NTRS1990

A review of fade detection techniques

Several proposed propagation fade detection techniques are reviewed in light of general requirements presented for beacon fade characterization. The discussion includes an analysis of phase lock versus frequency lock beacon tracking loops and of excess noise injection type radiometers. The Advanced Communications Technology Satellite (ACTS) beacon fade detection schemes proposed by the Communications Satellite Corporation and the Jet Propulsion Laboratory are examined along with the fade detection technique used by Harris in the Advanced Communications Technology Satellite (ACTS) low burst rate (LBR) terminal.

Pergal, F. J.↗

NASA NTRS1990

A highly stable crystal oscillator applied to geodetic VLBI experiment

Instead of a hydrogen maser, a carefully selected Crystal oscillator which is phase locked to a Cesium (Cs) frequency standard of a geodetic VLBI experiment. The domestic VLBI experiment with 55 km baseline using the Crystal oscillator at one end was made in Japan and the obtained error of the baseline vector components were 4 cm, and that of the baseline length was 3 cm. This system may be operated after only 2 hours warm up. These results coincides with those of conventional geodetic Laser ranging and VLBI using a hydrogen maser within the formal error. A VLBI experiment with over 1000 km baselines were carried out successfully from October 1988, and over 11000 km baseline between Japan and Antarctica was carried out successfully in January 1990.

Kiuchi, Hitoshi↗

NASA NTRS1991

Resonant Triad in Boundary-Layer Stability: Composite Solution and Comparison with Observations - Part 2

Here, numerical results are computed from an asymptotic near-resonance triad analysis. The analysis considers a resonant triad of instability waves consisting of a plane fundamental wave and a pair of symmetrical oblique subharmonic waves. The relevant scaling ensures that nonlinearity is confined to a distinct critical layer. The analysis is first used to form a composite solution that accounts for both the flow divergence and nonlinear effects. It is shown that the backreaction on the plane Tollmien Schlichting (TS) fundamental wave, although fully accounted for, is of little significance. The observed enhancement at the fundamental frequency disturbance is not in the plane TS wave, but is caused by nonlinearly generated waves at the fundamental frequency that result from nonlinear interactions in the critical layer. The saturation of the oblique waves is caused by their self-interaction. The nonlinear phase-locking phenomenon, the location of resonance with respect to the neutral stability curve, low frequency effects, detuning in the streamwise wave numbers, and nonlinear distortion of the mode shapes are discussed. Nonlinearity modifies the initially two dimensional Blasius profile into a fuller one with spanwise periodicity. The interactions at a wide range of unstable spanwise wave numbers are considered, and the existence of a preferred spanwise wave number is explained by means of the vorticity distribution in the critical layer. Besides presenting novel features of the phenomena and explaining the delicate mechanisms of the interactions, the results of the theory are in excellent agreement with experimental and numerical observations for all stages of the development and for various input parameters.

Mankbadi, Reda R.↗

NASA NTRS1991

Solar and stellar radio spikes - Limits on the saturation of the electron-cyclotron maser

The solar millisecond radio 'spikes' have been explained in terms of X-mode radiation generated by a maser near the electron gyrofrequency, acting on fast coronal electrons with a loss cone. This maser is a phenomenon described by quasi-linear theory. It is sensitive to the small first-relativistic correction to the gyrofrequency. Thus, it might be disrupted rather easily by nonlinear effects. The maximum radiation density that can be reached before the radiation entrains (phase-locks) the electrons and saturates the maser is discussed. If the observed durations of solar radio spikes are a measure of the rate of scattering into the loss-cone, then the inferred energy density is at least two orders of magnitude less than the energy density at which entrainment sets in. Also, maser emission from auroral kilometric radiation does not reach wave energies critical for electron entrainment. Maser emissions from flare stars, however, show 3-4 orders of magnitude higher radio fluxes and brightness temperatures than for the solar case and are likely to be saturated by entrainment.

Wentzel, Donat G.↗

NASA NTRS1990

Frame synchronization for a channel with different data rates

In some communication links, different data rates are used at different times on the same channel and each is assigned a separate frame synchronization (sync) marker. The frame search is completed within a finite number of frame intervals once both phase-lock and bit-sync are achieved because the incoming data rate can change. The probability of failure to frame-lock, and an upper bound of probability of false frame-lock in a frame search mode are derived for a communication link with a 10 to the -5th bit error probability. The probability of failure to detect data-rate change and the probability of false detection of data-rate change in a frame-lock mode are discussed. In a frame-lock mode, the probability of failure to detect data-rate change and probability detection of data-rate change an equal to 4.96 x 10 to the -12th. A frame-lock device can be used for the Space Station Freedom Ku-band return link.

Kwon, Hyuck M.↗

NASA NTRS1992

Period Modulation For Telemetry

In innovative telemetry scheme, time between pulses of light transmitted along optical fiber represents measured quantity. In period modulator, time varied by varying control-input voltage, which serves as critical voltage of relaxation oscillator. Demodulator is simple state estimator, no discriminator or phase-locked loop needed. Applicable to radio or wire transmission. Pulses proportional to temperature, pressure, voltage, or other variable monitored remotely.

Kirkham, Harold↗

NASA NTRS1992

Effect Of Phase Unbalance In Product Modulator

Paper presents theoretical study of effect of phase unbalance in product modulator of phase-modulation transmitter in deep-space telemetry system upon performance of system. Mathematical model of product modulator used to derive equations for relative strengths of desired suppressed-carrier component and undesired residual-carrier component of transmitted signal. Also addresses effects of unsuppressed-carrier component on carrier-tracking phase-locked loop and bit detector in receiver.

Nguyen, Tien M.↗

NASA NTRS1992

Tracking Comb Filter Suppresses Welder Harmonics

Tracking comb filter includes charge-coupled-device delay line and phase-locked loop. Filter removes harmonics of frequency of repetition of welding-current pulses from acoustic-emission signal. Spurious signals reduced almost to fundamental limit.

Delcher, Ray C.↗

NASA NTRS1992

Ultrasonic Dynamic Vector Stress Sensor

Stress inferred from measurements in specimens rather than in bonded gauges. Ultrasonic dynamic vector stress sensor (UDVSS) measures changes in dynamic directional stress occurring in material or structure at location touched by device when material or structure put under cyclic load. Includes phase-locked loop, synchronous amplifier, and contact probe. Useful among manufacturers of aerospace and automotive structures for stress testing and evaluation of designs.

Heyman, Joseph S.↗

NASA NTRS1992

Receiver performance of laser ranging measurements between the Lunar Observer and a subsatellite for lunar gravity studies

The optimal receiver for a direct detection laser ranging system for slow Doppler frequency shift measurement is shown to consist of a phase tracking loop which can be implemented approximately as a phase lock loop with a 2nd or 3rd order loop filter. The laser transmitter consists of an AlGaAs laser diode at a wavelength of about 800 nm and is intensity modulated by a sinewave. The receiver performance is shown to be limited mainly by the preamplifier thermal noise when a silicon avalanche photodiode is used. A high speed microchannel plate photomultiplier tube is shown to outperform a silicon APD despite its relatively low quantum efficiency at wavelengths near 800 nm. The maximum range between the Lunar Observer and the subsatellite for lunar gravity studies is shown to be about 620 km when using a state-of-the-art silicon APD and about 1000 km when using a microchannel plate photomultiplier tube in order to achieve a relative velocity measurement accuracy of 1 millimeter per second. Other parameters such as the receiver time base jitter and drift also limit performance and have to be considered in the design of an actual system.

Davidson, Frederic M.↗

NASA NTRS1990

A Tone-Aided/Dual Vestigial Sideband (TA/DVSB) system for mobile satellite channels

Tone-aided modulation is one way of combatting the effects of multipath fading and Doppler frequency shifts. A new tone-aided modulation format for M-ary phase-shift keyed signals (MPSK) is discussed. A spectral null for the placement of the tone is created in the center of the MPSK signal by translating the upper sideband upwards in frequency by the same amount. The key element of the system is the algorithm for recombining the data sidebands in the receiver, a function that is performed by a specialized phase-locked loop (PLL). The system structure is discussed and simulation results showing the PLL acquisition performance are presented.

Saulnier, Gary J.↗